IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There is no reason not to punch out stale delalloc blocks for zeroing
operations, as they otherwise behave exactly like normal writes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[commit message is verbose for discussion purposes - will trim it
down later. Some questions about implementation details at the end.]
Zorro Lang recently ran a new test to stress single inode extent
counts now that they are no longer limited by memory allocation.
The test was simply:
# xfs_io -f -c "falloc 0 40t" /mnt/scratch/big-file
# ~/src/xfstests-dev/punch-alternating /mnt/scratch/big-file
This test uncovered a problem where the hole punching operation
appeared to finish with no error, but apparently only created 268M
extents instead of the 10 billion it was supposed to.
Further, trying to punch out extents that should have been present
resulted in success, but no change in the extent count. It looked
like a silent failure.
While running the test and observing the behaviour in real time,
I observed the extent coutn growing at ~2M extents/minute, and saw
this after about an hour:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next ; \
> sleep 60 ; \
> xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 127657993
fsxattr.nextents = 129683339
#
And a few minutes later this:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 4177861124
#
Ah, what? Where did that 4 billion extra extents suddenly come from?
Stop the workload, unmount, mount:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 166044375
#
And it's back at the expected number. i.e. the extent count is
correct on disk, but it's screwed up in memory. I loaded up the
extent list, and immediately:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 4192576215
#
It's bad again. So, where does that number come from?
xfs_fill_fsxattr():
if (ip->i_df.if_flags & XFS_IFEXTENTS)
fa->fsx_nextents = xfs_iext_count(&ip->i_df);
else
fa->fsx_nextents = ip->i_d.di_nextents;
And that's the behaviour I just saw in a nutshell. The on disk count
is correct, but once the tree is loaded into memory, it goes whacky.
Clearly there's something wrong with xfs_iext_count():
inline xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp)
{
return ifp->if_bytes / sizeof(struct xfs_iext_rec);
}
Simple enough, but 134M extents is 2**27, and that's right about
where things went wrong. A struct xfs_iext_rec is 16 bytes in size,
which means 2**27 * 2**4 = 2**31 and we're right on target for an
integer overflow. And, sure enough:
struct xfs_ifork {
int if_bytes; /* bytes in if_u1 */
....
Once we get 2**27 extents in a file, we overflow if_bytes and the
in-core extent count goes wrong. And when we reach 2**28 extents,
if_bytes wraps back to zero and things really start to go wrong
there. This is where the silent failure comes from - only the first
2**28 extents can be looked up directly due to the overflow, all the
extents above this index wrap back to somewhere in the first 2**28
extents. Hence with a regular pattern, trying to punch a hole in the
range that didn't have holes mapped to a hole in the first 2**28
extents and so "succeeded" without changing anything. Hence "silent
failure"...
Fix this by converting if_bytes to a int64_t and converting all the
index variables and size calculations to use int64_t types to avoid
overflows in future. Signed integers are still used to enable easy
detection of extent count underflows. This enables scalability of
extent counts to the limits of the on-disk format - MAXEXTNUM
(2**31) extents.
Current testing is at over 500M extents and still going:
fsxattr.nextents = 517310478
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XLOG_STATE_DO_CALLBACK is only entered through XLOG_STATE_DONE_SYNC
and just used in a single debug check. Remove the flag and thus
simplify the calling conventions for xlog_state_do_callback and
xlog_state_iodone_process_iclog.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
ic_state really is a set of different states, even if the values are
encoded as non-conflicting bits and we sometimes use logical and
operations to check for them. Switch all comparisms to check for
exact values (and use switch statements in a few places to make it
more clear) and turn the values into an implicitly enumerated enum
type.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
XFSERRORDEBUG is never set and the code isn't all that useful, so remove
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
All but one caller of xlog_state_release_iclog hold l_icloglock and need
to drop and reacquire it to call xlog_state_release_iclog. Switch the
xlog_state_release_iclog calling conventions to expect the lock to be
held, and open code the logic (using a shared helper) in the only
remaining caller that does not have the lock (and where not holding it
is a nice performance optimization). Also move the refactored code to
require the least amount of forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor whitespace cleanup]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This will allow optimizing various locking cycles in the following
patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
ic_io_size is only used inside xlog_write_iclog, where we can just use
the count parameter intead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
xlog_write_iclog expects a bool for the second argument. While any
non-0 value happens to work fine this makes all calls consistent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The near mode fallback algorithm consists of a left/right scan of
the bnobt. This algorithm has very poor breakdown characteristics
under worst case free space fragmentation conditions. If a suitable
extent is far enough from the locality hint, each allocation may
scan most or all of the bnobt before it completes. This causes
pathological behavior and extremely high allocation latencies.
While locality is important to near mode allocations, it is not so
important as to incur pathological allocation latency to provide the
asolute best available locality for every allocation. If the
allocation is large enough or far enough away, there is a point of
diminishing returns. As such, we can bound the overall operation by
including an iterative cntbt lookup in the broader search. The cntbt
lookup is optimized to immediately find the extent with best
locality for the given size on each iteration. Since the cntbt is
indexed by extent size, the lookup repeats with a variably
aggressive increasing search key size until it runs off the edge of
the tree.
This approach provides a natural balance between the two algorithms
for various situations. For example, the bnobt scan is able to
satisfy smaller allocations such as for inode chunks or btree blocks
more quickly where the cntbt search may have to search through a
large set of extent sizes when the search key starts off small
relative to the largest extent in the tree. On the other hand, the
cntbt search more deterministically covers the set of suitable
extents for larger data extent allocation requests that the bnobt
scan may have to search the entire tree to locate.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Lift the btree fixup path into a helper function.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In preparation to enhance the near mode allocation bnobt scan algorithm, lift
it into a separate function. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The bnobt "find best" helper implements a simple btree walker
function. This general pattern, or a subset thereof, is reused in
various parts of a near mode allocation operation. For example, the
bnobt left/right scans are each iterative btree walks along with the
cntbt lastblock scan.
Rework this function into a generic btree walker, add a couple
parameters to control termination behavior from various contexts and
reuse it where applicable.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both algorithms duplicate the same btree allocation code. Eliminate
the duplication and reuse the fallback algorithm codepath.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The near mode bnobt scan searches left and right in the bnobt
looking for the closest free extent to the allocation hint that
satisfies minlen. Once such an extent is found, the left/right
search terminates, we search one more time in the opposite direction
and finish the allocation with the best overall extent.
The left/right and find best searches are currently controlled via a
combination of cursor state and local variables. Clean up this code
and prepare for further improvements to the near mode fallback
algorithm by reusing the allocation cursor best extent tracking
mechanism. Update the tracking logic to deactivate bnobt cursors
when out of allocation range and replace open-coded extent checks to
calls to the common helper. In doing so, rename some misnamed local
variables in the top-level near mode allocation function.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The cntbt lastblock scan checks the size, alignment, locality, etc.
of each free extent in the block and compares it with the current
best candidate. This logic will be reused by the upcoming optimized
cntbt algorithm, so refactor it into a separate helper. Note that
acur->diff is now initialized to -1 (unsigned) instead of 0 to
support the more granular comparison logic in the new helper.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If the size lookup lands in the last block of the by-size btree, the
near mode algorithm scans the entire block for the extent with best
available locality. In preparation for similar best available
extent tracking across both btrees, extend the allocation cursor
with best extent data and lift the associated state from the cntbt
last block scan code. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Extend the allocation cursor to track extent busy state for an
allocation attempt. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Introduce a new allocation cursor data structure to encapsulate the
various states and structures used to perform an extent allocation.
This structure will eventually be used to track overall allocation
state across different search algorithms on both free space btrees.
To start, include the three btree cursors (one for the cntbt and two
for the bnobt left/right search) used by the near mode allocation
algorithm and refactor the cursor setup and teardown code into
helpers. This slightly changes cursor memory allocation patterns,
but otherwise makes no functional changes to the allocation
algorithm.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix sparse complaints]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The upcoming allocation algorithm update searches multiple
allocation btree cursors concurrently. As such, it requires an
active state to track when a particular cursor should continue
searching. While active state will be modified based on higher level
logic, we can define base functionality based on the result of
allocation btree lookups.
Define an active flag in the private area of the btree cursor.
Update it based on the result of lookups in the existing allocation
btree helpers. Finally, provide a new helper to query the current
state.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no point in applying extent size hints for always COW inodes,
as we would just have to COW any extra allocation beyond the data
actually written.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit d03a2f1b9fa8 ("xfs: include WARN, REPAIR build options in
XFS_BUILD_OPTIONS"), Eric pointed out that the XFS_BUILD_OPTIONS string,
shown at module init time and in modinfo output, does not currently
include all available build options. So, he added in CONFIG_XFS_WARN and
CONFIG_XFS_REPAIR. However, this is not enough, add in CONFIG_XFS_QUOTA
and CONFIG_XFS_ASSERT_FATAL.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The srcmap is used to identify where the read is to be performed from.
It is passed to ->iomap_begin, which can fill it in if we need to read
data for partially written blocks from a different location than the
write target. The srcmap is only supported for buffered writes so far.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[hch: merged two patches, removed the IOMAP_F_COW flag, use iomap as
srcmap if not set, adjust length down to srcmap end as well]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
xfs_file_dirty is used to unshare reflink blocks. Rename the function
to xfs_file_unshare to better document that purpose, and skip iomaps
that are not shared and don't need zeroing. This will allow to simplify
the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Take the xfs writeback code and move it to fs/iomap. A new structure
with three methods is added as the abstraction from the generic writeback
code to the file system. These methods are used to map blocks, submit an
ioend, and cancel a page that encountered an error before it was added to
an ioend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[darrick: rename ->submit_ioend to ->prepare_ioend to clarify what it
does]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Lift the xfs code for tracing address space operations to the iomap
layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In preparation for moving the writeback code to iomap.c, replace the
XFS-specific COW fork concept with the iomap IOMAP_F_SHARED flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In preparation for moving the ioend structure to common code we need
to get rid of the xfs-specific xfs_trans type. Just make it a file
system private void pointer instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Introduce two nicely abstracted helper, which can be moved to the iomap
code later. Also use list_first_entry_or_null to simplify the code a
bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In preparation for moving the XFS writeback code to fs/iomap.c, switch
it to use struct iomap instead of the XFS-specific struct xfs_bmbt_irec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Don't set IOMAP_F_NEW if we COW over an existing allocated range, as
these aren't strictly new allocations. This is required to be able to
use IOMAP_F_NEW to zero newly allocated blocks, which is required for
the iomap code to fully support file systems that don't do delayed
allocations or use unwritten extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently we don't overwrite the flags field in the iomap in
xfs_bmbt_to_iomap. This works fine with 0-initialized iomaps on stack,
but is harmful once we want to be able to reuse an iomap in the
writeback code. Replace the shared parameter with a set of initial
flags an thus ensures the flags field is always reinitialized.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When doing a direct IO that spans the current EOF, and there are
written blocks beyond EOF that extend beyond the current write, the
only metadata update that needs to be done is a file size extension.
However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that
there is IO completion metadata updates required, and hence we may
fail to correctly sync file size extensions made in IO completion
when O_DSYNC writes are being used and the hardware supports FUA.
Hence when setting IOMAP_F_DIRTY, we need to also take into account
whether the iomap spans the current EOF. If it does, then we need to
mark it dirty so that IO completion will call generic_write_sync()
to flush the inode size update to stable storage correctly.
Fixes: 3460cac1ca76 ("iomap: Use FUA for pure data O_DSYNC DIO writes")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: removed the ext4 part; they'll handle it separately]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use iomap_dio_rw() to wait for unaligned direct IO instead of opencoding
the wait.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Filesystems do not support doing IO as asynchronous in some cases. For
example in case of unaligned writes or in case file size needs to be
extended (e.g. for ext4). Instead of forcing filesystem to wait for AIO
in such cases, add argument to iomap_dio_rw() which makes the function
wait for IO completion. This also results in executing
iomap_dio_complete() inline in iomap_dio_rw() providing its return value
to the caller as for ordinary sync IO.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The callers of xfs_bmap_local_to_extents_empty() log the inode
external to the function, yet this function is where the on-disk
format value is updated. Push the inode logging down into the
function itself to help prevent future mistakes.
Note that internal bmap callers track the inode logging flags
independently and thus may log the inode core twice due to this
change. This is harmless, so leave this code around for consistency
with the other attr fork conversion functions.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_attr_shortform_to_leaf() attempts to put the shortform fork back
together after a failed attempt to convert from shortform to leaf
format. While this code reallocates and copies back the shortform
attr fork data, it never resets the inode format field back to local
format. Further, now that the inode is properly logged after the
initial switch from local format, any error that triggers the
recovery code will eventually abort the transaction and shutdown the
fs. Therefore, remove the broken and unnecessary error handling
code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When a directory changes from shortform (sf) to block format, the sf
format is copied to a temporary buffer, the inode format is modified
and the updated format filled with the dentries from the temporary
buffer. If the inode format is modified and attempt to grow the
inode fails (due to I/O error, for example), it is possible to
return an error while leaving the directory in an inconsistent state
and with an otherwise clean transaction. This results in corruption
of the associated directory and leads to xfs_dabuf_map() errors as
subsequent lookups cannot accurately determine the format of the
directory. This problem is reproduced occasionally by generic/475.
The fundamental problem is that xfs_dir2_sf_to_block() changes the
on-disk inode format without logging the inode. The inode is
eventually logged by the bmapi layer in the common case, but error
checking introduces the possibility of failing the high level
request before this happens.
Update both of the dir2 and attr callers of
xfs_bmap_local_to_extents_empty() to log the inode core as
consistent with the bmap local to extent format change codepath.
This ensures that any subsequent errors after the format has changed
cause the transaction to abort.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Guarantee zeroed memory buffers for cases where potential memory
leak to disk can occur. In these cases, kmem_alloc is used and
doesn't zero the buffer, opening the possibility of information
leakage to disk.
Use existing infrastucture (xfs_buf_allocate_memory) to obtain
the already zeroed buffer from kernel memory.
This solution avoids the performance issue that would occur if a
wholesale change to replace kmem_alloc with kmem_zalloc was done.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
[darrick: fix bitwise complaint about kmflag_mask]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Removed unused error variable. Instead of using error variable,
returned the value directly as it wasn't updated.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The flags arg is always passed as zero, so remove it.
(xfs_buf_get_uncached takes flags to support XBF_NO_IOACCT for
the sb, but that should never be relevant for xfs_get_aghdr_buf)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
To ensure that all blocks touched by the range [offset, offset + count)
are allocated, we need to calculate the block count from the difference
of the range end (rounded up) and the range start (rounded down).
Before this patch, we just round up the byte count, which may lead to
unaligned ranges not being fully allocated:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..7]: 1396264..1396271
1: [8..15]: hole
There should not be a hole there. Instead, the first two blocks should
be fully allocated.
With this patch applied, the result is something like this:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..15]: 11024..11039
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Minor code cleanups.
- Fix a superblock logging error.
- Ensure that collapse range converts the data fork to extents format
when necessary.
- Revert the ALLOC_USERDATA cleanup because it caused subtle
behavior regressions.
-----BEGIN PGP SIGNATURE-----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=D/XD
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"There are a couple of bug fixes and some small code cleanups that came
in recently:
- Minor code cleanups
- Fix a superblock logging error
- Ensure that collapse range converts the data fork to extents format
when necessary
- Revert the ALLOC_USERDATA cleanup because it caused subtle behavior
regressions"
* tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: avoid unused to_mp() function warning
xfs: log proper length of superblock
xfs: revert 1baa2800e62d ("xfs: remove the unused XFS_ALLOC_USERDATA flag")
xfs: removed unneeded variable
xfs: convert inode to extent format after extent merge due to shift
Merge more updates from Andrew Morton:
- almost all of the rest of -mm
- various other subsystems
Subsystems affected by this patch series:
memcg, misc, core-kernel, lib, checkpatch, reiserfs, fat, fork,
cpumask, kexec, uaccess, kconfig, kgdb, bug, ipc, lzo, kasan, madvise,
cleanups, pagemap
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (77 commits)
arch/sparc/include/asm/pgtable_64.h: fix build
mm: treewide: clarify pgtable_page_{ctor,dtor}() naming
ntfs: remove (un)?likely() from IS_ERR() conditions
IB/hfi1: remove unlikely() from IS_ERR*() condition
xfs: remove unlikely() from WARN_ON() condition
wimax/i2400m: remove unlikely() from WARN*() condition
fs: remove unlikely() from WARN_ON() condition
xen/events: remove unlikely() from WARN() condition
checkpatch: check for nested (un)?likely() calls
hexagon: drop empty and unused free_initrd_mem
mm: factor out common parts between MADV_COLD and MADV_PAGEOUT
mm: introduce MADV_PAGEOUT
mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM
mm: introduce MADV_COLD
mm: untag user pointers in mmap/munmap/mremap/brk
vfio/type1: untag user pointers in vaddr_get_pfn
tee/shm: untag user pointers in tee_shm_register
media/v4l2-core: untag user pointers in videobuf_dma_contig_user_get
drm/radeon: untag user pointers in radeon_gem_userptr_ioctl
drm/amdgpu: untag user pointers
...
- Report both io errors and short io results to the directio endio
handler.
- Allow directio callers to pass an ops structure to iomap_dio_rw.
-----BEGIN PGP SIGNATURE-----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=zkFp
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.4-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"After last week's failed pull request attempt, I scuttled everything
in the branch except for the directio endio api changes, which were
trivial. Everything else will simply have to wait for the next cycle.
Summary:
- Report both io errors and short io results to the directio endio
handler.
- Allow directio callers to pass an ops structure to iomap_dio_rw"
* tag 'iomap-5.4-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: move the iomap_dio_rw ->end_io callback into a structure
iomap: split size and error for iomap_dio_rw ->end_io
to_mp() was first introduced with the following commit:
'commit 801cc4e17a34c ("xfs: debug mode forced buffered write failure")'
But the user of to_mp() was removed by below commit:
'commit f8c47250ba46e ("xfs: convert drop_writes to use the errortag
mechanism")'
So kernel build with clang throws below warning message:
fs/xfs/xfs_sysfs.c:72:1: warning: unused function 'to_mp' [-Wunused-function]
to_mp(struct kobject *kobject)
Hence to_mp() might be removed safely to get rid of warning message.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_trans_log_buf takes first byte, last byte as args. In this
case, it should be from 0 to sizeof() - 1.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
