IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
A workaround was previously introduced as part of commit 646f429ec2de
("platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup")
to prevent CPUs from going into the deepest state during the execution
of the `noirq` stage of `amd_pmc`. As `amd_pmc` has been pushed to the
last step for suspend on AMD platforms, this workaround is no longer
necessary.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220317141445.6498-4-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The return type for the s2idle callbacks is 'void', so any errors that
occur will no longer be displayed.
Output these error codes in the messages in case of any failures.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220317141445.6498-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The `OS_HINT` message is supposed to indicate that everything else
that is supposed to go into the deepest state has done so.
This assumption is invalid as:
1) The CPUs will still go in and out of the deepest state
2) Other devices may still run their `noirq` suspend routines
3) The LPS0 ACPI device will still run
To more closely mirror how this works on other operating systems,
move the `amd-pmc` suspend to the very last thing before the s2idle
loop via an lps0 callback.
Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220317141445.6498-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Clang static analysis returns this false positive
thinkpad_acpi.c:8926:19: warning: The left operand
of '!=' is a garbage value
(status != 0) ? "enabled" : "disabled", status);
~~~~~~ ^
The return of fan_get_status* is checked inconsistenly.
Sometime ret < 0 is an error, sometimes !ret.
Both fan_get_status() and fan_get_status_safe() return
0 on success and return negative otherwise. Change
the checks for error, ret < 0, into checks for
not success, !ret.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220312145327.1398510-1-trix@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
As it turns out, these laptops have 2 thermal profile versions.
A previous patch added support for v0, this patch adds support
for v1 thermal policies that are in use on some devices.
We obtain the thermal policy version by querying the get system
design data WMI call and looking at the fourth byte it returns,
except if the system board DMI Board ID is in a specific array
that the windows command center app overrides to thermal policy
v0 for some reason.
Signed-off-by: Enver Balalic <balalic.enver@gmail.com>
Link: https://lore.kernel.org/r/20220314121453.kjszdciymtg6ctbq@omen
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The purpose of this patch is to remove 128 bytes buffer limitation
imposed in bios_args structure.
A limiting factor discovered during this investigation was the struct
bios_args.data size restriction. The data member size limits all
possible WMI commands to those requiring buffer size of 128 bytes or
less. Several WMI commands and queries require a buffer size larger
than 128 bytes hence limiting current and feature supported by the
driver. It is for this reason, struct bios_args.data changed and is
dynamically allocated. hp_wmi_perform_query function changed to
handle the memory allocation and release of any required buffer size.
All changes were validated on a HP ZBook Workstation notebook,
HP EliteBook x360, and HP EliteBook 850 G8. Additional
validation was included in the test process to ensure no other
commands were incorrectly handled.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220310210853.28367-5-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Several WMI queries leverage hp_wmi_read_int function to read their
data. hp_wmi_read_int function was corrected in a previous patch.
Now, this function invokes hp_wmi_perform_query with input parameter
of size zero and the output buffer of size 4.
WMI commands calling hp_wmi_perform_query with input buffer size value
of zero are listed below.
HPWMI_DISPLAY_QUERY
HPWMI_HDDTEMP_QUERY
HPWMI_ALS_QUERY
HPWMI_HARDWARE_QUERY
HPWMI_WIRELESS_QUERY
HPWMI_BIOS_QUERY
HPWMI_FEATURE_QUERY
HPWMI_HOTKEY_QUERY
HPWMI_FEATURE2_QUERY
HPWMI_WIRELESS2_QUERY
HPWMI_POSTCODEERROR_QUERY
HPWMI_THERMAL_PROFILE_QUERY
HPWMI_FAN_SPEED_MAX_GET_QUERY
Invoking those WMI commands with an input buffer size greater
than zero will cause error 0x05 to be returned.
All WMI commands executed by the driver were reviewed and changes
were made to ensure the expected input and output buffer size match
the WMI specification.
Changes were validated on a HP ZBook Workstation notebook,
HP EliteBook x360, and HP EliteBook 850 G8. Additional
validation was included in the test process to ensure no other
commands were incorrectly handled.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220310210853.28367-4-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The purpose of this patch is to introduce a fix and removal of the
current hack when determining tablet mode status.
Determining the tablet mode status requires reading Byte 0 bit 2 as
reported by HPWMI_HARDWARE_QUERY. The investigation identified the
failure was rooted in two areas: HPWMI_HARDWARE_QUERY failure (0x05)
and reading Byte 0, bit 2 only to determine the table mode status.
HPWMI_HARDWARE_QUERY WMI failure also rendered the dock state value
invalid.
The latest changes use SMBIOS Type 3 (chassis type) and WMI Command
0x40 (device_mode_status) information to determine if the device is
in tablet mode or not.
hp_wmi_hw_state function was split into two functions;
hp_wmi_get_dock_state and hp_wmi_get_tablet_mode. The new functions
separate how dock_state and tablet_mode is handled in a cleaner
manner.
All changes were validated on a HP ZBook Workstation notebook,
HP EliteBook x360, and HP EliteBook 850 G8.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220310210853.28367-3-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The purpose of this patch is to introduce a fix to hp_wmi_read_int()
and eliminate failure error (0x05). Several WMI queries leverage
hp_wmi_read_int() to read their data and were failing with error 0x05.
HPWMI_DISPLAY_QUERY
HPWMI_HDDTEMP_QUERY
HPWMI_ALS_QUERY
HPWMI_HARDWARE_QUERY
HPWMI_WIRELESS_QUERY
HPWMI_POSTCODEERROR_QUERY
The failure occurs because hp_wmi_read_int() calls
hp_wmi_perform_query() with input parameter of size greater than zero.
Invoking those WMI commands with an input buffer size greater than
zero causes the command to be rejected and error 0x05 be returned.
All changes were validated on a HP ZBook Workstation notebook,
HP EliteBook x360, and HP EliteBook 850 G8.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220310210853.28367-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the only way to discover if a system went into the deepest sleep
state is to read from sysfs after you finished suspend.
To better illustrate to users that problems have occurred, check as part
of resume and display a warning.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220310150920.560583-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
err is always set because if we get here then dytc_profile_available
is always one of DYTC_FUNCMODE_MMC or DYTC_FUNCMODE_PSC, but the
compiler cannot now that, so initialize err to 0 to avoid a
compiler warning about err being uninitialized.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220309170532.343384-1-hdegoede@redhat.com
Minor update cleaning up the code around convert_profile_to_dytc as
identified in the previous commit.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220307183041.4467-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The recently added support for Lenovo Yoga Tablet 2 tablets uses
symbols from EFI and SPI add "depends on EFI && SPI" to the
X86_ANDROID_TABLETS Kconfig entry.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308152942.262130-1-hdegoede@redhat.com
The "size" variable can be uninitialized if amd_pmc_send_cmd() fails.
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220307141832.GA19660@kili
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the uncore_freq_common_init() return one on success and
zero on failure. There is only one caller and it has a "forgot to set
the error code" bug. Change uncore_freq_common_init() to return
negative error codes which makes the code simpler and avoids this kind
of bug in the future.
Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220304131925.GG28739@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The function device_create_file() in huawei_wmi_battery_add() can fail,
so its return value should be checked.
Fixes: 355a070b09ab ("platform/x86: huawei-wmi: Add battery charging thresholds")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220303022421.313-1-baijiaju1990@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Lenovo AMD platforms use PSC mode for providing platform
profile support.
Detect if PSC mode is available and add support for setting the
different profile modes appropriately.
Note - if both MMC mode and PSC mode are available then MMC mode
will be used in preference.
Tested on T14 G1 AMD and T14s G2 AMD.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220225182505.7234-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface 3 buttons are now handled by the generic soc_button_array
driver. As part of adding support to soc_button_array the ACPI code
now instantiates a platform_device rather then an i2c_client so there
no longer is an i2c_client for this driver to bind to.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220224110241.9613-3-hdegoede@redhat.com
The ACPI tables for the codec setup on the Lenovo Yoga Tablet 2 830/1050
miss 2 things compared to their Windows (Lenovo Yoga Tablet 2 1051)
counterparts:
1. There is no CLKE ACPI method to enable output of the 32KHz PMU clock on
pin 6 of the SUS GPIO controller
2. The GPIOs used by the codec are not listed in the fwnode for the codec
Add pinctrl code to set the SUS6 pin mux manually and a gpio-lookup table
for the GPIOs to work around both issues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220223133153.730337-6-hdegoede@redhat.com
These tablets' DSDT does not set acpi_gbl_reduced_hardware, so
acpi_power_off gets used as pm_power_off handler. Not setting
acpi_gbl_reduced_hardware may very well be correct for these tablets,
but acpi_power_off is broken on them.
Using acpi_power_off causes "poweroff" to hang hard. Requiring pressing
the powerbutton for 30 seconds *twice* followed by a normal 3 second
press to recover.
Avoid this by overriding the global pm_power_off handler to do
an EFI poweroff, which does work, instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220223133153.730337-5-hdegoede@redhat.com
The Lenovo Yoga Tablet 2 series comes in 4 versions: 830F, 830L, 1050F and
1050L. The F postfix indicates a wifi only version and the L postfix
indicates a LTE version. The 830 models are 8" and the 1050 models are 10".
Despite there being 8" and 10" versions all models use the same mainboard,
with an identical BIOS and thus identical DMI strings, so support for all
4 models is added through a single DMI table entry.
As all devices dealt with in the x86-android-tablets modules, these are
x86 ACPI tablets which ships with Android x86 as factory OS.
The mainboard's DSDT contain a bunch of I2C devices which are not actually
there, causing various resource conflicts. Enumeration of these is skipped
through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
This has been tested on a 830F and a 1050L tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220223133153.730337-4-hdegoede@redhat.com
Sometimes IRQs used by GPIOs in direct-IRQ mode are already registered
because they are used as ACPI "Interrupt () {}" resource for one of the
many bogus I2C devices present in the broken DSDTs of Android x86 tablets.
This is an issue if the existing (bogus) ACPI resource uses different
trigger settings then what is being requested, leading to an -EBUSY
error return of acpi_register_gsi().
Fix this by calling acpi_unregister_gsi() first, so that
the acpi_register_gsi() is allowed to change the trigger settings.
In cases where the GSI has not been registered yet
the acpi_unregister_gsi() is a no-op.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220223133153.730337-3-hdegoede@redhat.com
Instead of having quirks for systems that have a second fan it would
be nice to detect this setup.
Unfortunately, confirmed by the Lenovo FW team, there is no way to
retrieve this information from the EC or BIOS. Recommendation was to
attempt to read the fan and if successful then assume a 2nd fan is
present.
The fans are also supposed to spin up on boot for some time, so in
theory we could check for a speed > 0. In testing this seems to hold
true but as I couldn't test on all platforms I've avoided implementing
this. It also breaks for the corner case where you load the module
once the fans are idle.
Tested on P1G4, P1G3, X1C9 and T14 (no fans) and it works correctly.
For the platforms with dual fans where it was confirmed to work I have
removed the quirks. Potentially this could be done for all platforms
but I've left untested platforms in for now. On these platforms the
fans will be enabled and then detected - so no impact.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220222185137.4325-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Recent Fam19h EPYC server line of processors from AMD support system
management functionality via HSMP (Host System Management Port) interface.
The Host System Management Port (HSMP) is an interface to provide
OS-level software with access to system management functions via a
set of mailbox registers.
More details on the interface can be found in chapter
"7 Host System Management Port (HSMP)" of the following PPR
https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
This patch adds new amd_hsmp module under the drivers/platforms/x86/
which creates miscdevice with an IOCTL interface to the user space.
/dev/hsmp is for running the hsmp mailbox commands.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Nathan Fontenot <nathan.fontenot@amd.com>
Link: https://lore.kernel.org/r/20220222050501.18789-1-nchatrad@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The battery on the 2nd hand Surface 3 which I recently bought appears to
not have a serial number programmed in. This results in any I2C reads from
the registers containing the serial number failing with an I2C NACK.
This was causing mshw0011_bix() to fail causing the battery readings to
not work at all.
Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and
continue with an empty serial number to fix this.
Fixes: b1f81b496b0d ("platform/x86: surface3_power: MSHW0011 rev-eng implementation")
BugLink: https://github.com/linux-surface/linux-surface/issues/608
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com
commit 59348401ebed ("platform/x86: amd-pmc: Add special handling for
timer based S0i3 wakeup") adds support for using another platform timer
in lieu of the RTC which doesn't work properly on some systems. This path
was validated and worked well before submission. During the 5.16-rc1 merge
window other patches were merged that caused this to stop working properly.
When this feature was used with 5.16-rc1 or later some OEM laptops with the
matching firmware requirements from that commit would shutdown instead of
program a timer based wakeup.
This was bisected to commit 8d89835b0467 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path"). This wasn't supposed to cause any
negative impacts and also tested well on both Intel and ARM platforms.
However this changed the semantics of when CPUs are allowed to be in the
deepest state. For the AMD systems in question it appears this causes a
firmware crash for timer based wakeup.
It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT`
and all the CPUs going into a deep state while the timer is still being
programmed. It's likely a firmware bug, but to avoid it don't allow setting
CPUs into the deepest state while using CZN timer wakeup path.
If later it's discovered that this also occurs from "regular" suspends
without a timer as well or on other silicon, this may be later expanded to
run in the suspend path for more scenarios.
Cc: stable@vger.kernel.org # 5.16+
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e
Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Fixes: 23f62d7ab25b ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions")
Fixes: 59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup")
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Fixes: 19d8d6e36b4b ("platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell")
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220216225304.53911-5-djrscally@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The declaration
EXPORT_SYMBOL(dcdbas_smi_request);
was placed after smi_request_store(), which made a false impression that
dcdbas_smi_request() was not exported.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/20220212125908.357588-1-mat.jonczyk@o2.pl
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Spill to DRAM functionality is a feature that allows STB (Smart Trace
Buffer) to spill data from SRAM into DRAM on some future AMD ASICs. The
size allocated for STB is more than the earlier SoC's which helps to
collect more tracing and telemetry data.
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220204122527.3873552-1-Sanket.Goswami@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Split the current driver in two parts:
- Common part: All the commom function other than enumeration function.
- Enumeration/HW specific part: The current enumeration using CPU model
is left in the old module. This uses service of common driver to register
sysfs objects. Also provide callbacks for MSR access related to uncore.
- Add MODULE_DEVICE_TABLE to uncore-frequency.c
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-5-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a new sysfs attribute "current_freq_khz" to display current uncore
frequency. This value is read from MSR 0x621.
Root user permission is required to read uncore current frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use of sysfs API is always preferable over using kobject calls to create
attributes. Remove usage of kobject_init_and_add() and use
sysfs_create_group(). To create relationship between sysfs attribute
and uncore instance use device_attribute*, which is defined per
uncore instance.
To create uniform locking for both read and write attributes take
lock in the sysfs callbacks, not in the actual functions where
the MSRs are read or updated.
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move the current driver from platform/x86/intel/uncore-frequency.c
to platform/x86/intel/uncore-frequency/uncore-frequency.c.
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Intel Software Defined Silicon (SDSi) is a post manufacturing mechanism for
activating additional silicon features. Features are enabled through a
license activation process. The SDSi driver provides a per socket, sysfs
attribute interface for applications to perform 3 main provisioning
functions:
1. Provision an Authentication Key Certificate (AKC), a key written to
internal NVRAM that is used to authenticate a capability specific
activation payload.
2. Provision a Capability Activation Payload (CAP), a token authenticated
using the AKC and applied to the CPU configuration to activate a new
feature.
3. Read the SDSi State Certificate, containing the CPU configuration
state.
The operations perform function specific mailbox commands that forward the
requests to SDSi hardware to perform authentication of the payloads and
enable the silicon configuration (to be made available after power
cycling).
The SDSi device itself is enumerated as an auxiliary device from the
intel_vsec driver and as such has a build dependency on CONFIG_INTEL_VSEC.
Link: https://github.com/intel/intel-sdsi
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/20220212013252.1293396-2-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Now that there is only 1 c-file left of the intel_cht_int33fe code,
move it to the intel directory instead of it having its own int33fe
sub-directory.
Note this also renames the module from intel_cht_int33fe_typec to
intel_chtwc_int33fe, to better match the names of other PMIC related
modules like the intel_chtdc_ti_pwrbtn module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220206220220.88491-4-hdegoede@redhat.com
Move the Lenovo Yogabook YB1-X9x fuel-gauge instantiation code over to
the x86-android-tablets module, which already deals with this for various
other devices.
This removes the need to have a special intel_cht_int33fe_microb module
just for Lenovo Yogabook YB1-X9x laptops.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220206220220.88491-3-hdegoede@redhat.com
The intel_cht_int33fe driver is intended to deal with ACPI INT33FE
firmware-nodes on Cherry Trail devices with a Whiskey Cove PMIC.
The original version of the driver only dealt with the GPD win and
GPD pocket boards where the WC PMIC is connected to a TI BQ24292i charger,
paired with a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
Later it was split into a Type-C and a Micro-B variant to deal with
the Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 boards where
the ACPI INT33FE firmware-node only describes the TI BQ27542 fuelgauge.
Currently the driver differentiates between these 2 models by counting
the number of I2cSerialBus resources in the firmware-node.
There are a number of problems with this approach:
1. The driver autoloads based on the acpi:INT33FE modalias causing it
to get loaded on almost all Bay Trail and Cherry Trail devices. It
checks for the presence of a WC PMIC, so it won't bind but the loading
still wastes time and memory.
2. Both code paths in the driver are really only designed for a single
board and have harcoded various assumptions about these boards, if
another design matching the current checks ever shows up the driver
may end up doing something completely wrong.
Avoid both issues by switching to using DMI based autoloading of
the module, which has neither of these problems.
Note this splits the previous intel_cht_int33fe kernel module into two
modules: intel_cht_int33fe_typec and intel_cht_int33fe_microb, one for
each model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220206220220.88491-2-hdegoede@redhat.com
Minor charger / fuel-gauge improvements:
1. Make some of the names of charger / fuel-gauge related globals more
generic in preparation for also using them on other boards.
2. Update the dev_name on the Asus ME176C and TF103C to reflect that these
are using the bq24297 variant of the bq24190 family.
3. During review of the ug3105 driver the "upi,rsns-microohm" property was
renamed to "upisemi,rsns-microohm" as "upisemi" is the correct vendor
prefix, update the ug3105 properties accordingly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220206220220.88491-1-hdegoede@redhat.com
The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts. Enumeration of these
is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-6-hdegoede@redhat.com
The Asus ME176C + TF103C both have a lid-switch (for a cover in the ME176C
case), add a gpio-keys platform-device and platform-data describing the
lid-switch on both.
Note the "intel-int3496" in the asus_me176c_tf103c_pdevs[] array is not
new / not a change. This was already present in the generic int3496_pdevs[]
array, to which pdev_info pointed before. The int3496_pdevs[] array
contains just this entry for boards which only need that single pdev.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-4-hdegoede@redhat.com
Factor the code to go from a gpiochip label + pin-numer to a gpio_desc
out of x86_acpi_irq_helper_get() and make it into a new
x86_android_tablet_get_gpiod() helper, as this will be necessary in some
x86_dev_info.init() functions too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-3-hdegoede@redhat.com
Add properties describing the battery on the Asus ME176C / TF103C
tablets. The max constant charge volt / current settings were taken
from the factory Android image on these tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-2-hdegoede@redhat.com
power_supply_get_battery_info() which is used by charger and fuel-gauge
drivers on x86-android-tablets, expects the battery properties to be
described in a stand-alone battery fwnode which is then referenced
from both the charger and fuel-gauge device's fwnodes.
Add support for registering + unregistering a swnode for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-1-hdegoede@redhat.com
The fan curve control patches introduced a regression for at least the
TUF FX506 and possibly other TUF series laptops that do not have support
for fan curve control.
As part of the probing process, asus_wmi_evaluate_method_buf is called
to get the factory default fan curve . The WMI management function
returns 0 on certain laptops to indicate lack of fan curve control
instead of ASUS_WMI_UNSUPPORTED_METHOD. This 0 is transformed to
-ENODATA which results in failure when probing.
Fixes: 0f0ac158d28f ("platform/x86: asus-wmi: Add support for custom fan curves")
Reported-and-tested-by: Abhijeet V <abhijeetviswa@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220205112840.33095-1-hdegoede@redhat.com
's3_wmi.input' is a managed resource, so there should be no need to free it
explicitly.
Moreover, 's3_wmi' is a global variable. 's3_wmi.input' should be NULL
when this error handling path is executed, because it has not been
assigned yet.
All this is puzzling. So simplify it and remove a few lines of code to have
it be more straightforward.
Fixes: 3dda3b3798f9 ("platform/x86: Add custom surface3 platform device for controlling LID")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/8b1a6d05036d5d9527241b2345482b369331ce5c.1643531799.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/5805278.lOV4Wx5bFT@kreacher
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2631712.mvXUDI8C0e@kreacher
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
