IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently mmu_prepare is located at context switch.
Since we support a single context, no reason to reconfigure
the MMU registers every context switch.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
remove mmu_cache_lock as it protects a section which is already
protected by mmu_lock.
in addition, wrap mmu cache invalidate calls in hl_vm_ctx_fini with
mmu_lock.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When doing dma_alloc_coherent in the driver, we add a certain hard-coded
offset to the DMA address before returning to the callee function. This
offset is needed when our device use this DMA address to perform
outbound transactions to the host.
However, if we want to map the DMA'able memory to the user via
dma_mmap_coherent(), we need to pass the original dma address, without
this offset. Otherwise, we will get erronouos mapping.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We don't need to set EB on signal packets from collective slave
queues as it degrades performance. Because the slaves are the network
queues, the engine barrier doesn't actually guarantee that the
packet has been sent.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
FW hard reset capability indication is now moved to preboot stage.
Driver will check if HW is dirty only after it validated preboot
is up. If HW is dirty, driver will perform a hard reset according
to the FW capability.
In addition, FW defines a new message which driver need to send in
order to initiate a hard reset.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When the F/W security is enabled, goya needs to fetch the PSOC pll
frequency through a dedicated interface
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Modify the CS counter of a CB to be atomic, so no locking is required
when it is being modified or read.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once firmware security is enabled, driver must fetch pll frequencies
through the firmware message interface instead of reading the registers
directly.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We introduce a new wrapper which allows us to mmu map any size
to any host va_range available. In addition we remove duplicated
code from various places in driver and using this new wrapper
instead.
This wrapper supports mapping only contiguous physical
memory blocks and will be used for mappings that are done to the
driver ASID.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
F/W message returns 64bit value but up until now we casted it to
a 32bit variable, instead of receiving 64bit in the first place.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver must fetch FW hard reset capability during boot time,
in order to skip the hard reset flow if necessary.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Whether an ASIC has MMU towards its DRAM is an ASIC property, so
move it to the asic fixed properties structure.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver must verify if HW is dirty before trying to fetch preboot
information. Hence, we move this validation to a prior stage of
the boot sequence.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We print twice the firmware status regarding security, once in
common code and once in asic code. Remove the print in asic code
and leave the common code print.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
failure in reading pre-boot verion is not handled correctly,
upon failure we need to reset the device in order to be able
to reinstall the driver.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Several header files are repeatedly included in many files.
Move these files to habanalabs.h which is included by all.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In cases of multi-tenants, administrators may want to prevent data
leakage between users running on the same device one after another.
To do that the driver can scrub the internal memory (both SRAM and
DRAM) after a user finish to use the memory.
Because in GAUDI the driver allows only one application to use the
device at a time, it can scrub the memory when user app close FD.
In future devices where we have MMU on the DRAM, we can scrub the DRAM
memory with a finer granularity (page granularity) when the user
allocates the memory.
This feature is not supported in Goya.
To allow users that want to debug their applications, we add a kernel
module parameter to load the driver with this feature disabled.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support for fetching security indication from FW.
This indication is needed in order to skip unnecessary
initializations done by FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Today driver is able to load a whole FW binary into a specific
location on ASIC. We add support for loading sections from the
same FW binary into different loactions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Implement sync stream collective for GAUDI. Need to allocate additional
resources for that and add ctx_fini() to clean up those resources.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Define new API for collective wait support and modify sync stream
common flow. In addition add kernel CB allocation support for
internal queues.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In the future there will be situations where queues can accept either
kernel allocated CBs or user allocated CBs, depending on different
states.
Therefore, instead of using a boolean variable of kernel/user allocated
CB, we need to use a bitmask to indicate that, which will allow to
combine the two options.
Add a flag to the uapi so the user will be able to indicate whether
the CB was allocated by kernel or by user. Of course the driver
validates that.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Support advanced monitor functionality to monitor more than a
single SOB. In addition expand all CB generation functions
with buffer offset in order to put in them multiple packets that are
generated by different functions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
No need to print when the driver starts to initialize the H/W. Drivers
should be silent when everything is OK.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
All throughout the driver, normal kernel pointers are
stored as 'u64' struct members, which is kind of silly
and requires casting through a uintptr_t to void* every
time they are used.
There is one line that missed the intermediate uintptr_t
case, which leads to a compiler warning:
drivers/misc/habanalabs/common/command_buffer.c: In function 'hl_cb_mmap':
drivers/misc/habanalabs/common/command_buffer.c:512:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
512 | rc = hdev->asic_funcs->cb_mmap(hdev, vma, (void *) cb->kernel_address,
Rather than adding one more cast, just fix the type and
remove all the other casts.
Fixes: 0db575350cb1 ("habanalabs: make use of dma_mmap_coherent")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Future F/W versions will have enhanced security measures and the driver
won't be able to do certain configurations that it always did and those
configurations will be done by the firmware.
We use the firmware's preboot version to determine whether security
measures are enabled or not. Because we need this very early in our code,
the read of the preboot version is moved to the earliest possible place,
right after the device's PCI initialization.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There are cases in which the device should access the host memory of a
CB through the device MMU, and thus this memory should be mapped.
The patch adds a flag to the CB IOCTL, in which a user can ask the
driver to perform the mapping when creating a CB.
The mapping is allowed only if a dedicated VA range was allocated for
the specific ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Future changes require using a context while handling a command buffer,
and thus need to save the context in the command buffer object.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit adds the number of HOPs supported by the device to the
device MMU properties.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
For consistency with GAUDI code, add check of the relevant flag in the
device structure before resetting the GOYA device in case of firmware
event.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There were a couple of comments where the name ArmCP was still used. Rename
it to CPU-CP.
In addition, rename ArmCP or ARM in log messages to "device CPU".
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add dma_mmap_coherent() for goya and gaudi to match their use of
dma_alloc_coherent(), see the Link tag for why.
Link: https://lore.kernel.org/lkml/20200609091727.GA23814@lst.de/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Zhang Li <li.zhang@bitmain.com>
Cc: Ding Z Nan <oshack@hotmail.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
When shifting a boolean variable by more than 31 bits and putting the
result into a u64 variable, we need to cast the boolean into unsigned 64
bits to prevent possible overflow.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
ArmCP mandates that the device CPU is always an ARM processor, which might
be wrong in the future.
Most of this change is an internal renaming of variables, functions and
defines but there are two entries in sysfs which have armcp in their
names. Add identical cpucp entries but don't remove yet the armcp entries.
Those will be deprecated next year. Add the documentation about it in sysfs
documentation.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
change busy engines bitmask to 64 bits in order to represent
more engines, needed for future ASIC support.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
If there is a failure during the testing of a queue,
to ease up debugging - print the queue id.
Signed-off-by: Dotan Barak <dbarak@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Update firmware header with new API for getting pcie info
such as tx/rx throughput and replay counter.
These counters are needed by customers for monitor and maintenance
of multiple devices.
Add new opcodes to the INFO ioctl to retrieve these counters.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
During command buffer parsing, driver extracts packet id
from user buffer. Driver must validate this packet id, since it is
being used in order to extract information from internal structures.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There's no need to try to be cute with the include file locations in the
Makefile, so just specify exactly where the files are.
Bonus is this fixes the problem of building with O= as well as trying to
just build the subdirectory alone.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Omer Shpigelman <oshpigelman@habana.ai>
Cc: Tomer Tayar <ttayar@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Ben Segal <bpsegal20@gmail.com>
Cc: Christine Gharzuzi <cgharzuzi@habana.ai>
Cc: Pawel Piskorski <ppiskorski@habana.ai>
Link: https://lore.kernel.org/r/20200728171851.55842-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create a device MMU-mapped internal command buffer pool, in order to allow
the driver to allocate CBs for the signal/wait operations
that are fetched by the queues when they are configured with the user's
address space ID.
We must pre-map this internal pool due to performance issues.
This pool is needed for future ASIC support and it is currently unused in
GOYA and GAUDI.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently the driver halts the device CPU in the halt engines function,
which halts all the engines of the ASIC. The problem is that if later on we
stop the reset process (due to inability to clean memory mappings in time),
the CPU will remain in halt mode. This creates many issues, such as
thermal/power control and FLR handling.
Therefore, move the halting of the device CPU to the very end of the reset
process, just before writing to the registers to initiate the reset. In
addition, the driver now needs to send a message to the device F/W to
disable it from sending interrupts to the host machine because during halt
engines function the driver disables the MSI/MSI-X interrupts.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Currently the amount of maximum queues is statically configured.
Using a static value is causing redundunt cycles when traversing
all queues and consumes more memory than actually needed.
In this patch we configure each asic with the exact number of
queues needed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Divide iATU initialization into inbound/outbound methods.
We must separate it in order to enable different match mode
per PCIe region.
In addition, added support for PCI address match mode.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The profiler needs to know the PLL values for correctly showing the
profiling data. Because our firmware can use different PLL configurations,
we need to read the PLL values from the ASIC to pass them to the profiler.
Signed-off-by: Adam Aharon <aaharon@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently sync stream is limited only for external queues. We want to
remove this constraint by adding a new queue property dedicated for sync
stream. In addition we move the initialization and reset methods to the
common code since we can re-use them with slight changes.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
