IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add compatible strings to support the system timer, clocksource, OST,
watchdog and PWM blocks of the JZ4760 and JZ4760B SoCs.
Newer SoCs which behave like the JZ4760 or JZ4760B now see their
compatible string require a fallback compatible string that corresponds
to one of these two SoCs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210308212302.10288-1-paul@crapouillou.net
Apple SoCs run firmware that sets up a simplefb-compatible framebuffer
for us. Add a compatible for it, and two missing supported formats.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
AIC is the Apple Interrupt Controller found on Apple ARM SoCs, such as
the M1.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Not all platforms provide the same set of timers/interrupts, and Linux
only needs one (plus kvm/guest ones); some platforms are working around
this by using dummy fake interrupts. Implementing interrupt-names allows
the devicetree to specify an arbitrary set of available interrupts, so
the timer code can pick the right one.
This also adds the hyp-virt timer/interrupt, which was previously not
expressed in the fixed 4-interrupt form.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This introduces bindings for all three 2020 Apple M1 devices:
* apple,j274 - Mac mini (M1, 2020)
* apple,j293 - MacBook Pro (13-inch, M1, 2020)
* apple,j313 - MacBook Air (M1, 2020)
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is different from the legacy AAPL prefix used on PPC, but
consensus is that we prefer `apple` for these new platforms.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This point in gregkh's tty-next tree includes all the samsung_tty
changes that were part of v3 of the M1 bring-up series, and have
already been merged in.
Signed-off-by: Hector Martin <marcan@marcan.st>
Detailed description for this pull request:
1. Update extcon provider driver
- Add the support of charging interrupt to detect charger connector
for extcon-max8997.c
- Detect OTG when USB_ID pin is connected to ground for extcon-sm5502.c
- Add the support for VBUS detection for extcon-qcom-spmi-misc.c
and replace qcom,pm8941-misc binding document with yaml style.
-----BEGIN PGP SIGNATURE-----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=13Nh
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v5.13
Detailed description for this pull request:
1. Update extcon provider driver
- Add the support of charging interrupt to detect charger connector
for extcon-max8997.c
- Detect OTG when USB_ID pin is connected to ground for extcon-sm5502.c
- Add the support for VBUS detection for extcon-qcom-spmi-misc.c
and replace qcom,pm8941-misc binding document with yaml style.
* tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: qcom-spmi: Add support for VBUS detection
bindings: pm8941-misc: Add support for VBUS detection
bindings: pm8941-misc: Convert bindings to YAML
extcon: sm5502: Detect OTG when USB_ID is connected to ground
extcon: max8997: Add CHGINS and CHGRM interrupt handling
FPGA Manager:
- Russ' first change improves port_enable reliability
- Russ' second change adds a new device ID for a DFL device
- Geert's change updates the examples in binding with dt overlay sugar
syntax
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRORt0E5Sb/c/mZMgkXxQAtim5VSwUCYG5feQAKCRAXxQAtim5V
S1v3AQDR8dK1Bfoa8h8QHM+Xhb8UNkoC70Fbl/znQrTbRPimtAEAkgmKgElijBdL
zE+zMFa0OUnkBCHW2IQZXfuu+qI9GQw=
=P0ck
-----END PGP SIGNATURE-----
Merge tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
Second set of FPGA Manager changes for 5.13-rc1
FPGA Manager:
- Russ' first change improves port_enable reliability
- Russ' second change adds a new device ID for a DFL device
- Geert's change updates the examples in binding with dt overlay sugar
syntax
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: pci: add DID for D5005 PAC cards
dt-bindings: fpga: fpga-region: Convert to sugar syntax
fpga: dfl: afu: harden port enable logic
fpga: Add support for Xilinx DFX AXI Shutdown manager
dt-bindings: fpga: Add compatible value for Xilinx DFX AXI shutdown manager
fpga: xilinx-pr-decoupler: Simplify code by using dev_err_probe()
fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER
Those DDR related defines do not exist. Replace their references with
their numerical constant.
Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The Rockchip DMC (Dynamic Memory Interface) needs to access to the PMU
general register files to know the DRAM type, so add a phandle to the
syscon that manages these registers.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add interrupt support for reporting VBUS detection status that can be
detected via a dedicated PMIC pin.
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Convert bindings from txt to YAML.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
1. Fine tune the line time for EOTp.
2. Add support mt8192 dpi.
3. Make crtc config-updating atomic.
4. Don't support hdmi connector creation.
-----BEGIN PGP SIGNATURE-----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=VClB
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.13
1. Fine tune the line time for EOTp.
2. Add support mt8192 dpi.
3. Make crtc config-updating atomic.
4. Don't support hdmi connector creation.
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210405082248.3578-1-chunkuang.hu@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
The general trend is to have devicetree bindings in YAML format, to
allow automatic validation of bindings and devicetrees.
Convert the NPCM SoC family's binding to YAML before it accumulates more
entries.
The nuvoton,npcm750-evb compatible string is introduced to keep the
structure of the binding a little simpler.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210320164023.614059-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
This patch converts text based dt-binding document to YAML based
dt-binding document.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/1617758731-12380-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Updates:
- Yaml conversion for mvebu-utmi binding, bcm-ns-usb2 and
bcm-ns-usb3 bindings
- Mediatek dsi and hdmi phy updates
- TI j721e-wiz updates for AM64
- Cadence-torrent phy updates for SGMII/QSGMII
- New support:
- usb3-dp phy for Qualcomm SM8250
- UTMI phy for Armada CP110
- USB phy for Qualcomm SC7280
- Binding and driver for Sparx5 ethernet serdes
-----BEGIN PGP SIGNATURE-----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=T8Jv
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy-for-5.13
- Updates:
- Yaml conversion for mvebu-utmi binding, bcm-ns-usb2 and
bcm-ns-usb3 bindings
- Mediatek dsi and hdmi phy updates
- TI j721e-wiz updates for AM64
- Cadence-torrent phy updates for SGMII/QSGMII
- New support:
- usb3-dp phy for Qualcomm SM8250
- UTMI phy for Armada CP110
- USB phy for Qualcomm SC7280
- Binding and driver for Sparx5 ethernet serdes
* tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (75 commits)
phy: fix resource_size.cocci warnings
phy: Sparx5 Eth SerDes: Use direct register operations
phy: hisilicon: Use the correct HiSilicon copyright
phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON
phy: qcom-qmp: add support for sm8250-usb3-dp phy
phy: qcom-qmp: rename common registers
phy: qcom-qmp: move DP functions to callbacks
dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250
dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml
phy: ti: j721e-wiz: Configure 'p_standard_mode' only for DP/QSGMII
dt-bindings: phy: fix dt_binding_check warning in mediatek, ufs-phy.yaml
phy: zynqmp: Handle the clock enable/disable properly
dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml
phy: microchip: PHY_SPARX5_SERDES should depend on ARCH_SPARX5
phy: cadence-torrent: Add delay for PIPE clock to be stable
phy: cadence-torrent: Explicitly request exclusive reset control
phy: cadence-torrent: Do not configure SERDES if it's already configured
phy: cadence-torrent: Group reset APIs and clock APIs
phy: ti: j721e-wiz: Do not configure wiz if its already configured
...
Updates for v5.13-rc1 are:
Core:
- Ability to add quirks for masters
- static checker cleanup for bus code
Drivers:
- DMI quirks for Intel controllers
- static checker cleanup for drivers
- add auto enumeration support qcom controller
-----BEGIN PGP SIGNATURE-----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=TGhO
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.13-rc1
Updates for v5.13-rc1 are:
Core:
- Ability to add quirks for masters
- static checker cleanup for bus code
Drivers:
- DMI quirks for Intel controllers
- static checker cleanup for drivers
- add auto enumeration support qcom controller
* tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (45 commits)
soundwire: intel_init: test link->cdns
soundwire: qcom: handle return correctly in qcom_swrm_transport_params
soundwire: qcom: cleanup internal port config indexing
soundwire: qcom: wait for fifo space to be available before read/write
soundwire: qcom: add static port map support
soundwire: qcom: update port map allocation bit mask
soundwire: add static port mapping support
soundwire: stream: fix memory leak in stream config error path
soundwire: qcom: use signed variable for error return
soundwire: qcom: wait for enumeration to be complete in probe
soundwire: qcom: add auto enumeration support
soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_add
soundwire: qcom: add support to new interrupts
soundwire: qcom: update register read/write routine
soundwire: qcom: start the clock during initialization
soundwire: qcom: set continue execution flag for ignored commands
soundwire: qcom: add support to missing transport params
dt-bindings: soundwire: qcom: clarify data port bus parameters
soundwire: cadence: only prepare attached devices on clock stop
soundwire: generic_allocation: fix confusion between group and packing
...
The WPCM450 AIC ("Advanced Interrupt Controller") is the interrupt
controller found in the Nuvoton WPCM450 SoC and other Winbond/Nuvoton
SoCs.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210406120921.2484986-4-j.neuschaefer@gmx.net
Add the compatible string for sc7280 SoC from Qualcomm
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1615787946-26474-1-git-send-email-rnayak@codeaurora.org
This extends the initial SM8350 description merged in v5.12 with
CPUfreq, SMMU, UFS, RPMHPD, SPMI, USB and remoteproc support. It adds
initial PMIC definitions for the 6 PMICs found on the MTP and it
introduces the new SM8350 Hardware Development Kit (HDK).
SC7180 is further polished, the DisplayPort portion of the QMP phy is
defined and several new SKUs of the Trogdor devices are introduced.
The new SC7280 platform is introduced, with RPMH, RPMHPD, RPMCC, SPMI,
CPU idle, SMMU and watchdog defined.
SDM845 gains the camera related nodes and some cleanups.
For SM8250 it brings some cleanups and migrates SPI0 to use GPIO for
chip select.
-----BEGIN PGP SIGNATURE-----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=a6Po
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for 5.13
This extends the initial SM8350 description merged in v5.12 with
CPUfreq, SMMU, UFS, RPMHPD, SPMI, USB and remoteproc support. It adds
initial PMIC definitions for the 6 PMICs found on the MTP and it
introduces the new SM8350 Hardware Development Kit (HDK).
SC7180 is further polished, the DisplayPort portion of the QMP phy is
defined and several new SKUs of the Trogdor devices are introduced.
The new SC7280 platform is introduced, with RPMH, RPMHPD, RPMCC, SPMI,
CPU idle, SMMU and watchdog defined.
SDM845 gains the camera related nodes and some cleanups.
For SM8250 it brings some cleanups and migrates SPI0 to use GPIO for
chip select.
* tag 'qcom-arm64-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (79 commits)
arm64: dts: qcom: qrb5165-rb5: switch into using GPIO for SPI0 CS
arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS
arm64: dts: qcom: sm8250: further split of spi pinctrl config
arm64: dts: qcom: sm8250: split spi pinctrl config
arm64: dts: qcom: sdm845-db845c: Enable ov8856 sensor and connect to ISP
arm64: dts: qcom: sdm845-db845c: Configure regulators for camss node
arm64: dts: qcom: sdm845: Add CAMSS ISP node
arm64: dts: qcom: pm8150: Enable RTC
arm64: dts: qcom: sm8350-mtp: Add PMICs
arm64: dts: qcom: pmr735B: Add base dts file
arm64: dts: qcom: pmr735a: Add base dts file
arm64: dts: qcom: pm8350c: Add base dts file
arm64: dts: qcom: pm8350b: Add base dts file
arm64: dts: qcom: pm8350: Add base dts file
arm64: dts: qcom: pmk8350: Add base dts file
arm64: dts: qcom: sm8350: Add spmi node
arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x
dt-bindings: arm: qcom: Add SM8350 HDK
arm64: dts: qcom: sc7180: Drop duplicate dp_hot_plug_det node in trogdor
arm64: dts: qcom: sm8350: fix number of pins in 'gpio-ranges'
...
Link: https://lore.kernel.org/r/20210404164914.712946-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYGchiwAKCRDj7w1vZxhR
xW1/APsFH9bywTduCrsuJui1LdD3mVbhkN75tKfBw7Ce8rmloAD/U5dth8PKA4h6
yPCdc2k0XaK7ItcD3eveN2uwiNq89gU=
=Ktsz
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
* tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: beelink-x2: Add power button
arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection
ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI out
ARM: dts: sun4i: Add support for Topwise A721 tablet
dt-bindings: arm: Add Topwise A721
arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc
arm64: dts: allwinner: Use the new r_intc binding
ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc
ARM: dts: sunxi: h3/h5: Add r_intc node
ARM: dts: sunxi: Use the new r_intc binding
Link: https://lore.kernel.org/r/8a3e3271-bebe-4d27-a9e7-7b7a6311a38d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).
So let's add a property for declaring such secure regions so that the
drivers can skip touching them.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210402150128.29128-3-manivannan.sadhasivam@linaro.org
Binding covering the ad7150, ad7151 and ad7156 capacitance to digital
convertors. The only difference between these is how many channels they
have (1 or 2)
Whilst it is clearly necessary to provide power to the part, we don't
need to know the voltage or anything so if it is always on, there should
be no need to have it specified in the binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210314181511.531414-24-jic23@kernel.org
Document the device tree bindings for Embedded Trace Extensions.
ETE can be connected to legacy coresight components and thus
could optionally contain a connection graph as described by
the CoreSight bindings.
Cc: devicetree@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-15-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Updates binding document since the avc and vp8 hardware encoder in
MT8173 are now separated. Separate "mediatek,mt8173-vcodec-enc" to
"mediatek,mt8173-vcodec-enc-vp8" and "mediatek,mt8173-vcodec-enc".
This patch is not a compatible change, but we must do this modifaction
because MediaTek IOMMU add the device_link between the smi-larb
device and venc_device, if the venc device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
There is a bit of backward compatibility for avc encoder, the avc
encoder device node still has compatible "mediatek,mt8173-vcodec-enc".
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com>
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Changeset 5e4cdca887fd ("dt-bindings: i3c: Convert the bus description to yaml")
renamed: Documentation/devicetree/bindings/i3c/i3c.txt
to: Documentation/devicetree/bindings/i3c/i3c.yaml.
Update the cross-references accordingly.
Fixes: 5e4cdca887fd ("dt-bindings: i3c: Convert the bus description to yaml")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Expand the description of the binding itself and of individual
properties to include additional information that may not be immediately
appartent from reading the reference manual. Drop the last sentence of
the phy-supply description that refers to the driver's implementation.
While at it, fix the capitalization of MIPI CSI-2 in the title.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The fsl,csis-hs-settle property isn't used by the driver anymore. Drop
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The reset-names property is incorrect, as it references the reset of the
MIPI D-PHY master, which is used by the DSI controller. Fixing the
property name would create backward-compatibility issues. As the device
has a single reset, we can instead drop reset-names completely, which
also simplifies the binding.
Fix the example accordingly to use the correct reset.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The WCNSS needs firmware which differs between platforms, and possibly
boards. Add a new property "firmware-name" to allow the DT to specify
the platform/board specific path to this firmware file.
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
Link: https://lore.kernel.org/r/20210312003318.3273536-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the board bindings for the MeCool (Videostrong Technology Co., Ltd)
KII-Pro (S905D) and KIII-Pro (S912) devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210402064521.30579-2-christianshewitt@gmail.com
Make trigger delay configurable through device tree with
trigger-delay-ms property.
Trigger delay is the time to wait before starting shutdown
sequence after trigger line assertion.
Trigger delay must take into account the OFFT time configured
with the capacitor connected to OFFT pin of the LTC2952 chip.
Basically, the higher the capacitance connected to OFFT pin,
the larger trigger delay must be.
Signed-off-by: Marek Czerski <ma.czerski@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
