IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
quota: Fix possible oops in __dquot_initialize()
ext3: Update kernel-doc comments
jbd/2: fixed typos
ext2: fixed typo.
ext3: Fix debug messages in ext3_group_extend()
jbd: Convert atomic_inc() to get_bh()
ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
jbd: Fix debug message in do_get_write_access()
jbd: Check return value of __getblk()
ext3: Use DIV_ROUND_UP() on group desc block counting
ext3: Return proper error code on ext3_fill_super()
ext3: Remove unnecessary casts on bh->b_data
ext3: Cleanup ext3_setup_super()
quota: Fix issuing of warnings from dquot_transfer
quota: fix dquot_disable vs dquot_transfer race v2
jbd: Convert bitops to buffer fns
ext3/jbd: Avoid WARN() messages when failing to write the superblock
jbd: Use offset_in_page() instead of manual calculation
jbd: Remove unnecessary goto statement
jbd: Use printk_ratelimited() in journal_alloc_journal_head()
...
Update missing/broken argument descriptions and fix formatting.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
bh->b_data is already a pointer to char so casts to 'char *' should
be meaningless. Remove them.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Fix mount-count check to emit warning only if s_max_mnt_count
is greater than 0 according to man tune2fs(8). Also removes
unnecessary casts.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This fixes a WARN backtrace in mark_buffer_dirty() that occurs during unmount
when the underlying block device is removed. This bug has been seen on System
Z when removing all paths from a multipath-backed ext3 mount; on System P when
injecting enough PCI EEH errors to make the SCSI controller go offline; and
similar warnings have been seen (and patched) with ext2/ext4.
The super block update from a previous operation has marked the buffer as in
error, and the flag has to be cleared before doing the update. Similar changes
have been made to ext4 by commit 914258bf2c.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
__block_write_begin and block_prepare_write are identical except for slightly
different calling conventions. Convert all callers to the __block_write_begin
calling conventions and drop block_prepare_write.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
xen-blkfront: disable barrier/flush write support
Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
block: remove BLKDEV_IFL_WAIT
aic7xxx_old: removed unused 'req' variable
block: remove the BH_Eopnotsupp flag
block: remove the BLKDEV_IFL_BARRIER flag
block: remove the WRITE_BARRIER flag
swap: do not send discards as barriers
fat: do not send discards as barriers
ext4: do not send discards as barriers
jbd2: replace barriers with explicit flush / FUA usage
jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
jbd: replace barriers with explicit flush / FUA usage
nilfs2: replace barriers with explicit flush / FUA usage
reiserfs: replace barriers with explicit flush / FUA usage
gfs2: replace barriers with explicit flush / FUA usage
btrfs: replace barriers with explicit flush / FUA usage
xfs: replace barriers with explicit flush / FUA usage
block: pass gfp_mask and flags to sb_issue_discard
dm: convey that all flushes are processed as empty
...
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
BKL: remove BKL from freevxfs
BKL: remove BKL from qnx4
autofs4: Only declare function when CONFIG_COMPAT is defined
autofs: Only declare function when CONFIG_COMPAT is defined
ncpfs: Lock socket in ncpfs while setting its callbacks
fs/locks.c: prepare for BKL removal
BKL: Remove BKL from ncpfs
BKL: Remove BKL from OCFS2
BKL: Remove BKL from squashfs
BKL: Remove BKL from jffs2
BKL: Remove BKL from ecryptfs
BKL: Remove BKL from afs
BKL: Remove BKL from USB gadgetfs
BKL: Remove BKL from autofs4
BKL: Remove BKL from isofs
BKL: Remove BKL from fat
BKL: Remove BKL from ext2 filesystem
BKL: Remove BKL from do_new_mount()
BKL: Remove BKL from cgroup
BKL: Remove BKL from NTFS
...
If a filesystem has inode size > 128 and someone deletes lost+found and
reuses inode 11 for some other file, extented attributes set for this
inode before umount will get lost after remounting the filesystem. This
is because extended attributes will get stored in an inode but ext3_iget
will ignore them due to workaround of a bug in an old mkfs.
Fix the problem by initializing i_extra_isize to 0 for freshly allocated
inodes where mkfs workaround in ext3_iget applies. This way these inodes
will always store extended attributes in a special block and no problems
occur.
The bug was spotted and a reproduction test provided by:
Masayoshi MIZUMA <m.mizuma@jp.fujitsu.com>
Reviewed-by: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
The BKL lock is protecting the remounting against a potential call to
ext3_put_super(). This could not happen, since this is protected by the
s_umount rw semaphore of struct super_block.
Therefore I think the BKL is protecting nothing here.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The BKL is protecting nothing than two memory allocations here.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.
I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.
do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.
Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.
[arnd: do not add the BKL to those file systems that already
don't use it elsewhere]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller. To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout. For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
As part of adding support for OCFS2 to mount huge volumes, we need to
check that the sector_t and page cache of the system are capable of
addressing the entire volume.
An identical check already appears in ext3 and ext4. This patch moves
the addressability check into its own function in fs/libfs.c and
modifies ext3 and ext4 to invoke it.
[Edited to -EINVAL instead of BUG_ON() for bad blocksize_bits -- Joel]
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Cc: linux-ext4@vger.kernel.org
Acked-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
The mbcache code was written to support a variable number of indexes,
but all the existing users use exactly one index. Simplify to code to
support only that case.
There are also no users of the cache entry free operation, and none of
the users keep extra data in cache entries. Remove those features as
well.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.
In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:
spufs: explicitly checks for ATTR_SIZE earlier
btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above
In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split up the block_write_begin implementation - __block_write_begin is a new
trivial wrapper for block_prepare_write that always takes an already
allocated page and can be either called from block_write_begin or filesystem
code that already has a page allocated. Remove the handling of already
allocated pages from block_write_begin after switching all callers that
do it to __block_write_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence. This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway. Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In data=journal mode, we still use block_write_begin() to prepare page for
writing. This function can occasionally mark buffer dirty which violates
journalling assumptions - when a buffer is part of a transaction, it should be
dirty and a buffer can be already part of a forget list of some transaction
when block_write_begin() gets called. This violation of journalling assumptions
then results in "JBD: Spotted dirty metadata buffer..." warnings.
In fact, temporary dirtying the buffer while the page is still locked does not
really cause problems to the journalling because we won't write the buffer
until the page gets unlocked. So we just have to make sure to clear dirty bits
before unlocking the page.
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
data=writeback mode is dangerous as it leads to higher data loss and stale data
exposure when systems crash. It should not be the default, especially when all
major distros ensure their ext3 filesystems default to ordered mode. Change the
default mode to the safer data=ordered mode, because we should be caring far
more about avoiding stale data exposure than performance.
CC: linux-ext4@vger.kernel.org
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
It can happen that ext3_free_branches calls ext3_forget() for an indirect block
in an earlier transaction than a transaction in which we clear pointer to this
indirect block. Thus if we crash before a transaction clearing the block
pointer is committed, we will see indirect block pointing to already freed
blocks and complain during orphan list cleanup.
The fix is simple: Make sure ext3_forget() is called in the transaction
doing block pointer clearing.
This is a backport of an ext4 fix by Amir G. <amir73il@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
The nobh option was only supported for writeback mode, but given that all
write paths (except mmapped writed) actually create buffer heads, it
effectively was a no-op already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
ext3 didn't update the ctime of the file when its permission was changed.
Steps to reproduce:
# touch aaa
# stat -c %Z aaa
1275289822
# setfacl -m 'u::x,g::x,o::x' aaa
# stat -c %Z aaa
1275289822 <- unchanged
But, according to the spec of the ctime, ext3 must update it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
quota: Convert quota statistics to generic percpu_counter
ext3 uses rb_node = NULL; to zero rb_root.
quota: Fixup dquot_transfer
reiserfs: Fix resuming of quotas on remount read-write
pohmelfs: Remove dead quota code
ufs: Remove dead quota code
udf: Remove dead quota code
quota: rename default quotactl methods to dquot_
quota: explicitly set ->dq_op and ->s_qcop
quota: drop remount argument to ->quota_on and ->quota_off
quota: move unmount handling into the filesystem
quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
quota: move remount handling into the filesystem
ocfs2: Fix use after free on remount read-only
Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
The problem with this is that 17d9ddc72f ("rbtree: Add support
for augmented rbtrees") in the linux-next tree adds a new field to that
struct which needs to be NULLas well. This patch uses RB_ROOT as the
intializer so all of the relevant fields will be NULL'd.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Follow the dquot_* style used elsewhere in dquot.c.
[Jan Kara: Fixed up missing conversion of ext2]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Remount handling has fully moved into the filesystem, so all this is
superflous now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently the VFS calls into the quotactl interface for unmounting
filesystems. This means filesystems with their own quota handling
can't easily distinguish between user-space originating quotaoff
and an unount. Instead move the responsibily of the unmount handling
into the filesystem to be consistent with all other dquot handling.
Note that we do call dquot_disable a lot later now, e.g. after
a sync_filesystem. But this is fine as the quota code does all its
writes via blockdev's mapping and that is synced even later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Instead of having wrappers in the VFS namespace export the dquot_suspend
and dquot_resume helpers directly. Also rename vfs_quota_disable to
dquot_disable while we're at it.
[Jan Kara: Moved dquot_suspend to quotaops.h and made it inline]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently do_remount_sb calls into the dquot code to tell it about going
from rw to ro and ro to rw. Move this code into the filesystem to
not depend on the dquot code in the VFS - note ocfs2 already ignores
these calls and handles remount by itself. This gets rid of overloading
the quotactl calls and allows to unify the VFS and XFS codepaths in
that area later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
get rid of home-grown mutex in cris eeprom.c
switch ecryptfs_write() to struct inode *, kill on-stack fake files
switch ecryptfs_get_locked_page() to struct inode *
simplify access to ecryptfs inodes in ->readpage() and friends
AFS: Don't put struct file on the stack
Ban ecryptfs over ecryptfs
logfs: replace inode uid,gid,mode initialization with helper function
ufs: replace inode uid,gid,mode initialization with helper function
udf: replace inode uid,gid,mode init with helper
ubifs: replace inode uid,gid,mode initialization with helper function
sysv: replace inode uid,gid,mode initialization with helper function
reiserfs: replace inode uid,gid,mode initialization with helper function
ramfs: replace inode uid,gid,mode initialization with helper function
omfs: replace inode uid,gid,mode initialization with helper function
bfs: replace inode uid,gid,mode initialization with helper function
ocfs2: replace inode uid,gid,mode initialization with helper function
nilfs2: replace inode uid,gid,mode initialization with helper function
minix: replace inode uid,gid,mode init with helper
ext4: replace inode uid,gid,mode init with helper
...
Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
ext4 was updated to accept barrier/nobarrier mount options
in addition to the older barrier=0/1. The barrier story
is complex enough, we should help people by making the options
the same at least, even if the defaults are different.
This patch allows the barrier/nobarrier mount options for ext3,
while keeping nobarrier the default.
It also unconditionally displays barrier status in show_options,
and prints a message at mount time if barriers are not enabled,
just as ext4 does.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
log_start_commit() returns 1 only when it started a transaction
commit. Thus in case transaction commit is already running, we
fail to wait for the commit to finish. Fix the issue by always
waiting for the commit regardless of the log_start_commit return
value.
Signed-off-by: Jan Kara <jack@suse.cz>
Currently block/inode/dir counters are initialized before journal was
recovered. In fact after journal recovery this info will probably
change which results in incorrect numbers returned from statfs(2).
BUG:#15768
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
There is no point in loading bitmap for groups which are completely full.
This causes noticeable performance problems (and memory pressure) on small
systems with large full filesystem
(http://marc.info/?l=linux-ext4&m=126843108314310&w=2).
Jan Kara: Added a comment and changed check to use cpu-endian value.
Signed-off-by: "Frans van de Wiel" <fvdw@fvdw.eu>
Signed-off-by: Jan Kara <jack@suse.cz>
