IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
-----BEGIN PGP SIGNATURE-----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=UxVn
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.14
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: everest: Add pcie cable card indicator leds
ARM: dts: aspeed: everest: Add vrm and other indicator leds
ARM: dts: aspeed: everest: Add dimm indicator leds
ARM: dts: aspeed: everest: Add pcie slot indicator leds
ARM: dts: aspeed: everest: Add nvme and fan indicator leds
ARM: dts: aspeed: everest: Add system level indicator leds
ARM: dts: aspeed-g5: Add SCU phandle to GFX node
ARM: dts: aspeed: Everest: Add directly controlled LEDs
ARM: dts: aspeed: Rainier 4U: Remove fan updates
ARM: dts: aspeed: Everest: Fix cable card PCA chips
ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
ARM: dts: aspeed: mtjade: switch to 64MB flash layout
ARM: dts: aspeed: mtjade: Add PSU support
ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
ARM: dts: aspeed: Set earlycon boot argument
ARM: dts: aspeed-g6: Add pinctrl settings
ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
-----BEGIN PGP SIGNATURE-----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=5lho
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.14 merge window
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
ARM: dts: omap5-board-common: align gpio hog names with dt-schema
ARM: dts: omap3: align gpio hog names with dt-schema
ARM: dts: am437x: align gpio hog names with dt-schema
ARM: dts: am335x: align GPIO hog names with dt-schema
ARM: dts: osd3358-sm-red: group in the same phandle all its properties
ARM: dts: dra76-evm: remove ov5640
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYLCiTgAKCRCKwlD9ZEnx
cNB6AP40CBtMLlW/h/DGCvm3iW8bRwHrBiuXeYrcHeJh1DoXFQEA3foLN4s5FZIQ
ZXFFOAgGVMHQft1o0qL0nO0ytw7zhg8=
=YIvB
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.14
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: alt: Add SW2 as GPIO keys
ARM: dts: renesas: Move enable-method to CPU nodes
arm64: dts: renesas: beacon: Fix USB ref clock references
arm64: dts: renesas: beacon: Fix USB extal reference
ARM: dts: rcar-gen1: Correct internal delay for i2c[123]
arm64: dts: renesas: eagle: Add x1 clock
ARM: dts: koelsch: Rename sw2 to keyboard
ARM: dts: r8a7779, marzen: Fix DU clock names
arm64: dts: renesas: v3msk: Fix memory size
arm64: dts: renesas: condor: Switch eMMC bus to 1V8
arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders
arm64: dts: renesas: beacon kit: Setup AVB refclk
arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list
ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list
Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
-----BEGIN PGP SIGNATURE-----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=/Twf
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
* tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini: remove xxx-cells from display
ARM: dts: gemini-dlink-dir-685: Remove address from display port
ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c
ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c
ARM: dts: gemini: convert obsolete SPI properties
ARM: dts: gemini: use the right rtc compatible
ARM: dts: gemini: add device_type on pci
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
ARM: dts: gemini: rename mdio to the right name
MAINTAINERS: gemini: add missing dts pattern
Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
-----BEGIN PGP SIGNATURE-----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=W/eR
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
* tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Fix up the IXP4xx ethernet nodes
ARM: dts: ixp4xx: Add beeper to the NSLU2
ARM: dts: ixp4xx: Create a proper expansion bus
ARM: dts: ixp4xx: Add PCI hosts
ARM: dts: ixp4xx: Add ethernet
Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
These are leds on the IBM proprietary PCIE cards called cable cards.
Cable cards have 2 ports on them and each port has an indicator led.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-7-joel@jms.id.au
This commit adds indicator leds for vrms, processors, opencapi
connectors, tpm, planar, power distribution card and dasd
backplane and are driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-6-joel@jms.id.au
These are the indicator leds for nvme slots and fans and are
driven by PCA9552.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-3-joel@jms.id.au
These are the system level indicator leds that are driven by
PCA9551 connected to the Operator Panel.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-2-joel@jms.id.au
These LEDs are directly connected to the BMC's GPIO bank
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The 4U fans do not need a different "tach-pulses" property than the 2U
machine. In addition, the "maxim,fan-dual-tach" property does not exist
upstream yet, so it should also be removed.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Correct two PCA chips which were placed on the wrong I2C bus and
address.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
As the 32MB flash layout will soon be exhausted, switch to 64MB layout.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-4-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable PSU support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable OCP card support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-2-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Most of the aspeed boards have copied the 'earlyprink' string in
the bootargs. However, there's no earlyprink driver configured in the
defconfigs, so this does nothing.
A combination of setting stdout in the chosen node and adding earlycon
to bootargs causes early serial output to appear early. This changes all
boards to use this option.
The console=ttyS4,115200 option is still required, as this is used by
the run time uart driver.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Alexander Filippov <a.filippov@yadro.com>
Link: https://lore.kernel.org/r/20210526051220.136432-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces.
Currently, only SGPIO master 1 and SGPIO slve 1 in the pinctrl dtsi.
SGPIO master 2 and slave 2 should be added in pinctrl dtsi as well.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210525055308.31069-3-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
A number of sub-mailbox node names in various OMAP2+ dts files are
currently using underscores. This is not adhering to the node name
convention, fix all of these to use hiphens.
These nodes are already using the prefix mbox, so they will be in
compliance with the sub-mailbox node name convention being added in
the OMAP Mailbox YAML binding as well.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The OMAP sub-mailbox used to communicate with the Wakeup M3 remote
processor is currently named wkup_m3. This name can be confused with
the remote processor node. So, rename this to mbox-wkup-m3 to remove
the ambiguity and to also adhere to the sub-mailbox node name convention
being added in the OMAP Mailbox YAML binding.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The OMAP sub-mailbox used to communicate with the DSP and IVA remote
processors are currently named after the processor name. These can be
confused with the remote processors themselves. Rename them to remove
the ambiguity and use the prefix mbox to also adhere to the sub-mailbox
node name convention being added in the OMAP Mailbox YAML binding.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The interrupt-names property is neither defined nor used in either
of the OMAP Mailbox binding or the driver. So, drop them. This is
in preparation for converting the OMAP Mailbox binding to YAML
format.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ti,omap2-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ti,omap4-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
According to Documentation/devicetree/bindings/arm/cpus.yaml, the
"enable-method" property should be a property of the individual CPU
nodes, and not of the parent "cpus" container node.
However, on R-Car Gen2 and RZ/G1 SoCs, the property is tied to the
"cpus" node instead.
Secondary CPU bringup and CPU hot (un)plug work regardless, as
arm_dt_init_cpu_maps() falls back to looking in the "cpus" node.
The cpuidle code does not have such a fallback, so it does not detect
the enable-method. Note that cpuidle does not support the
"renesas,apmu" enable-method yet, so for now this does not make any
difference.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/35fcfedf9de9269185c48ca5a6dfcba7cdd3484b.1621427319.git.geert+renesas@glider.be
"make dtbs_check" complains:
arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected
Change the first clock name to match the DT bindings.
This has no effect on actual operation, as the Display Unit driver in
Linux does not use the first clock name on R-Car H1, but just grabs the
first clock.
Fixes: 665d79aa47cb3983 ("ARM: shmobile: marzen: Add DU external pixel clock to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/9d5e1b371121883b3b3e10a3df43802a29c6a9da.1619699965.git.geert+renesas@glider.be
The bindings have been updated to support two clocks.
Add a clock-names list in the device tree with fck in it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224115146.9131-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
aspeed-ast2600-evb.dts was modified for supporting A2 evb.
Since A1/A0 evbs don't have GPIO regulators and SD clock frequency
(SCU210) is different to A2 as well. Adding a new dts that removes new
nodes created in aspeed-ast2600-evb.dts is necessary.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210524073308.9328-4-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set MMC timing-phase register by adding the phase correction binding in the
device tree.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210524073308.9328-3-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
AST2600 A2 (or newer) EVB has gpio regulators for toggling signal voltage
between 3.3v and 1.8v, the patch adds sdhci node and gpio regulator in
the dts file and adds comment for describing the reference design.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210524073308.9328-2-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails.
- Make the APPLE AIC chip driver depend on APPLE.
- Remove redundant error output on devm_ioremap_resource() failure.
-----BEGIN PGP SIGNATURE-----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=XjHi
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
The address and reg adds no value to the port node, remove them.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
