IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The shost->can_queue value is initially used to set per-HW queue context
tag depth in the block layer. This ensures that the shost is not sent too
many commands which it can deal with. However lowering sdebug_max_queue
separately means that we can easily overload the shost, as in the following
example:
$ cat /sys/bus/pseudo/drivers/scsi_debug/max_queue
192
$ cat /sys/class/scsi_host/host0/can_queue
192
$ echo 100 > /sys/bus/pseudo/drivers/scsi_debug/max_queue
$ cat /sys/class/scsi_host/host0/can_queue
192
$ fio --filename=/dev/sda --direct=1 --rw=read --bs=4k --iodepth=256
--runtime=1200 --numjobs=10 --time_based --group_reporting
--name=iops-test-job --eta-newline=1 --readonly --ioengine=io_uring
--hipri --exitall_on_error
iops-test-job: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256
...
fio-3.28
Starting 10 processes
[ 111.269885] scsi_io_completion_action: 400 callbacks suppressed
[ 111.269885] blk_print_req_error: 400 callbacks suppressed
[ 111.269889] I/O error, dev sda, sector 440 op 0x0:(READ) flags 0x1200000 phys_seg 1 prio class 2
[ 111.269892] sd 0:0:0:0: [sda] tag#132 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
[ 111.269897] sd 0:0:0:0: [sda] tag#132 CDB: Read(10) 28 00 00 00 01 68 00 00 08 00
[ 111.277058] I/O error, dev sda, sector 360 op 0x0:(READ) flags 0x1200000 phys_seg 1 prio class 2
[...]
Ensure that this cannot happen by allowing sdebug_max_queue be modified
only when we have no shosts. As such, any shost->can_queue value will match
sdebug_max_queue, and sdebug_max_queue cannot be modified separately.
Since retired_max_queue is no longer set, remove support.
Continue to apply the restriction that sdebug_host_max_queue cannot be
modified when sdebug_host_max_queue is set. Adding support for that would
mean extra code, and no one has complained about this restriction
previously.
A command like the following may be used to remove a shost:
echo -1 > /sys/bus/pseudo/drivers/scsi_debug/add_host
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-11-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The functions to update ndelay and delay value first check whether we have
any in-flight IO for any host. It does this by checking if any tag is used
in the global submit queues.
We can achieve the same by setting the host as blocked and then ensuring
that we have no in-flight commands with scsi_host_busy().
Note that scsi_host_busy() checks SCMD_STATE_INFLIGHT flag, which is only
set per command after we ensure that the host is not blocked, i.e. we see
more commands active after the check for scsi_host_busy() returns 0.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-10-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of iterating all deferred commands in the submission queue
structures, use blk_mq_tagset_busy_iter(), which is a standard API for
this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-9-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of iterating all deferred commands in the submission queue
structures, use blk_mq_tagset_busy_iter(), which is a standard API for
this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-8-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eventually we will drop the sdebug_queue struct as it is not really
required, so start with making the sdebug_queued_cmd dynamically allocated
for the lifetime of the scsi_cmnd in the driver.
As an interim measure, make sdebug_queued_cmd.sd_dp a pointer to struct
sdebug_defer. Also keep a value of the index allocated in
sdebug_queued_cmd.qc_arr in struct sdebug_queued_cmd.
To deal with an races in accessing the scsi cmnd allocated struct
sdebug_queued_cmd, add a spinlock for the scsi command in its priv area.
Races may be between scheduling a command for completion, aborting a
command, and the command actually completing and freeing the struct
sdebug_queued_cmd.
[mkp: typo fix]
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-7-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The feature to block queues is quite dubious, since it races with in-flight
IO. Indeed, it seems unnecessary for block queues for any times we do so.
Anyway, to keep the same behaviour, use standard SCSI API to stop IO being
sent - scsi_{un}block_requests().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-6-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no reason that calls to block_unblock_all_queues() from different
context can't race with one another, so protect with the
sdebug_host_list_mutex. There's no need for a more fine-grained per shost
locking here (and we don't have a per-host lock anyway).
Also simplify some touched code in sdebug_change_qdepth().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The shost list lock, sdebug_host_list_lock, is a spinlock. We would only
lock in non-atomic context in this driver, so use a mutex instead, which is
friendlier if we need to schedule when iterating.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-4-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In clear_luns_changed_on_target(), we iter all devices for all shosts to
conditionally clear the SDEBUG_UA_LUNS_CHANGED flag in the per-device
uas_bm.
One condition to see whether we clear the flag is to test whether the host
for the device under consideration is the same as the matching device's
(devip) host. This check will only ever pass for devices for the same
shost, so only iter the devices for the matching device shost.
We can now drop the spinlock'ing of the sdebug_host_list_lock in the same
function. This will allow us to use a mutex instead of the spinlock for the
global shost lock, as clear_luns_changed_on_target() could be called in
non-blocking context, in scsi_debug_queuecommand() -> make_ua() ->
clear_luns_changed_on_target() (which is why required a spinlock).
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-3-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a report that the blktests scsi/004 test for "TASK SET FULL" (TSF)
now fails.
The condition upon we should issue this TSF is when the sdev queue is
full. The check for a full queue has an off-by-1 error. Previously we would
increment the number of requests in the queue after testing if the queue
would be full, i.e. test if one less than full. Since we now use
scsi_device_busy() to count the number of requests in the queue, this would
already account for the current request, so fix the test for queue full
accordingly.
Fixes: 151f0ec9ddb5 ("scsi: scsi_debug: Drop sdebug_dev_info.num_in_q")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202303201334.18b30edc-oliver.sang@intel.com
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-2-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
chenxiang <chenxiang66@hisilicon.com> says:
This series contain some fixes including:
- Grab sas_dev lock when traversing sas_dev list to avoid NULL
pointer
- Handle NCQ error when IPTT is valid
- Ensure all enabled PHYs up during controller reset
- Exit suspend state when usage count of runtime PM is greater than 0
https://lore.kernel.org/r/1679283265-115066-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the current status of the host controller is suspended, enabling a
local PHY just after disabling all local PHYs in expander environment, a
hang as follows occurs:
[ 486.854655] INFO: task kworker/u256:1:899 blocked for more than 120 seconds.
[ 486.862207] Not tainted 6.1.0-rc4+ #1
[ 486.870545] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 486.878893] task:kworker/u256:1 state:D stack:0 pid:899 ppid:2 flags:0x00000008
[ 486.887745] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [libsas]
[ 486.894704] Call trace:
[ 486.897400] __switch_to+0xf0/0x170
[ 486.901146] __schedule+0x3e4/0x1160
[ 486.904970] schedule+0x64/0x104
[ 486.908442] rpm_resume+0x158/0x6a0
[ 486.912163] __pm_runtime_resume+0x5c/0x84
[ 486.916489] smp_execute_task_sg+0x1f8/0x264 [libsas]
[ 486.921773] sas_discover_expander.part.0+0xbc/0x720 [libsas]
[ 486.927750] sas_discover_root_expander+0x90/0x154 [libsas]
[ 486.933552] sas_discover_domain+0x444/0x6d0 [libsas]
[ 486.938826] process_one_work+0x1e0/0x450
[ 486.943057] worker_thread+0x150/0x44c
[ 486.947015] kthread+0x114/0x120
[ 486.950447] ret_from_fork+0x10/0x20
[ 486.954292] INFO: task kworker/u256:2:1780 blocked for more than 120 seconds.
[ 486.961637] Not tainted 6.1.0-rc4+ #1
[ 486.966087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 486.974356] task:kworker/u256:2 state:D stack:0 pid:1780 ppid:2 flags:0x00000208
[ 486.983141] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas]
[ 486.990252] Call trace:
[ 486.992930] __switch_to+0xf0/0x170
[ 486.996645] __schedule+0x3e4/0x1160
[ 487.000439] schedule+0x64/0x104
[ 487.003886] schedule_timeout+0x17c/0x1c0
[ 487.008102] wait_for_completion+0x7c/0x160
[ 487.012488] __flush_workqueue+0x104/0x3e0
[ 487.016782] sas_porte_bytes_dmaed+0x414/0x454 [libsas]
[ 487.022203] sas_port_event_worker+0x38/0x60 [libsas]
[ 487.027449] process_one_work+0x1e0/0x450
[ 487.031645] worker_thread+0x150/0x44c
[ 487.035594] kthread+0x114/0x120
[ 487.039017] ret_from_fork+0x10/0x20
[ 487.042828] INFO: task bash:11488 blocked for more than 121 seconds.
[ 487.049366] Not tainted 6.1.0-rc4+ #1
[ 487.053746] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 487.061953] task:bash state:D stack:0 pid:11488 ppid:10977 flags:0x00000204
[ 487.070698] Call trace:
[ 487.073355] __switch_to+0xf0/0x170
[ 487.077050] __schedule+0x3e4/0x1160
[ 487.080833] schedule+0x64/0x104
[ 487.084270] schedule_timeout+0x17c/0x1c0
[ 487.088474] wait_for_completion+0x7c/0x160
[ 487.092851] __flush_workqueue+0x104/0x3e0
[ 487.097137] drain_workqueue+0xb8/0x160
[ 487.101159] __sas_drain_work+0x50/0x90 [libsas]
[ 487.105963] sas_suspend_ha+0x64/0xd4 [libsas]
[ 487.110590] suspend_v3_hw+0x198/0x1e8 [hisi_sas_v3_hw]
[ 487.115989] pci_pm_runtime_suspend+0x5c/0x1d0
[ 487.120606] __rpm_callback+0x50/0x150
[ 487.124535] rpm_callback+0x74/0x80
[ 487.128204] rpm_suspend+0x110/0x640
[ 487.131955] rpm_idle+0x1f4/0x2d0
[ 487.135447] __pm_runtime_idle+0x58/0x94
[ 487.139538] queue_phy_enable+0xcc/0xf0 [libsas]
[ 487.144330] store_sas_phy_enable+0x74/0x100
[ 487.148770] dev_attr_store+0x20/0x34
[ 487.152606] sysfs_kf_write+0x4c/0x5c
[ 487.156437] kernfs_fop_write_iter+0x120/0x1b0
[ 487.161049] vfs_write+0x2d0/0x36c
[ 487.164625] ksys_write+0x70/0x100
[ 487.168194] __arm64_sys_write+0x24/0x30
[ 487.172280] invoke_syscall+0x50/0x120
[ 487.176186] el0_svc_common.constprop.0+0x168/0x190
[ 487.181214] do_el0_svc+0x34/0xc0
[ 487.184680] el0_svc+0x2c/0xb4
[ 487.187879] el0t_64_sync_handler+0xb8/0xbc
[ 487.192205] el0t_64_sync+0x19c/0x1a0
We find that when all local PHYs are disabled, all the devices will be
removed, the ->runtime_suspend() callback suspend_v3_hw() directly execute
since the controller usage count drop to 0. On the other side, the first
local PHY is enabled through the sysfs interface, and ensures that function
phy_up_v3_hw() is completed due to suspend_v3_hw()->
interrupt_disable_v3_hw(). In the expander scenario,
sas_discover_root_expander() is executed in event work
DISCE_DISCOVER_DOMAIN, which will increases the controller usage count and
carry out a resume and sends SMPIO, it cannot be completed because the
runtime PM status of the controller is RPM_SUSPENDING. At the same time,
the ->runtime_suspend() callback suspend_v3_hw() also cannot complete the
process because of drain libsas event queue in sas_suspend_ha(), so hung
occurs.
(thread 1) | (thread 2)
... |
rpm_idle() |
... |
__update_runtime_status(RPM_SUSPENDING)|
... | ...
suspend_v3_hw() | smp_execute_task_sg()
... | ...
interrupt_disable_v3_hw() | pm_runtime_get_sync()
| ...
... | rpm_resume() //RPM_SUSPENDING
|
__sas_drain_work() |
To fix this, check if the current runtime PM status of the controller
allows to be suspended continue after interrupt_disable_v3_hw(), return
immediately if not.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hislicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-5-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the controller reset operation, hisi_sas_phy_enable() is executed for
each enabled local PHY, and refresh the port id of each device based on the
latest hisi_sas_phy->port_id after 1 second sleep, hisi_sas_phy->port_id is
configured in the interrupt processing function phy_up_v3_hw(). However, in
directly attached scenario, for some SATA disks the amount of time for
phyup more than 1s sometimes. In this case, incorrect port id may be
configured in hisi_sas_refresh_port_id(). As a result, all the internal
IOs fail and disk lost, such as follows:
[10717.666565] hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=10(sata)
[10718.826813] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=63
task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc8003f 0x0
0x0 Error info: 0x0 0x0 0x0 0x0
[10718.843428] sas: TMF task open reject failed 5000000000000501
[10718.849242] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=64
task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc80040 0x0
0x0 Error info: 0x0 0x0 0x0 0x0
[10718.865856] sas: TMF task open reject failed 5000000000000501
[10718.871670] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=65
task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc80041 0x0
0x0 Error info: 0x0 0x0 0x0 0x0
[10718.888284] sas: TMF task open reject failed 5000000000000501
[10718.894093] sas: executing TMF for 5000000000000501 failed after 3 attempts!
[10718.901114] hisi_sas_v3_hw 0000:74:02.0: ata disk 5000000000000501 reset failed
[10718.908410] hisi_sas_v3_hw 0000:74:02.0: controller reset complete
.....
[10773.298633] ata216.00: revalidation failed (errno=-19)
[10773.303753] ata216.00: disable device
So the time of waitting for PHYs up is 1s which may be not enough. To solve
the issue, running hisi_sas_phy_enable() in parallel through async
operations and use wait_for_completion_timeout() to wait for PHYs come up
instead of directly sleep for 1 second.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an NCQ error occurs when the IPTT is valid and slot->abort flag is set
in completion path, sas_task_abort() will be called to abort only one NCQ
command now, and the host would be set to SHOST_RECOVERY state. But this
may not kick-off EH Immediately until other outstanding QCs timeouts. As a
result, the host may remain in the SHOST_RECOVERY state for up to 30
seconds, such as follows:
[7972317.645234] hisi_sas_v3_hw 0000:74:04.0: erroneous completion iptt=3264 task=00000000466116b8 dev id=2 sas_addr=0x5000000000000502 CQ hdr: 0x1883 0x20cc0 0x40000 0x20420000 Error info: 0x0 0x0 0x200000 0x0
[7972341.508264] sas: Enter sas_scsi_recover_host busy: 32 failed: 32
[7972341.984731] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 32 tries: 1
All NCQ commands that are in the queue should be aborted when an NCQ error
occurs in this scenario.
Fixes: 05d91b557af9 ("scsi: hisi_sas: Directly trigger SCSI error handling for completion errors")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang with W=1 reports:
drivers/scsi/qla4xxx/ql4_isr.c:475:11: error: variable
'count' set but not used [-Werror,-Wunused-but-set-variable]
uint32_t count = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230331175757.1860780-1-trix@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang with W=1 reports:
drivers/scsi/snic/snic_scsi.c:490:6: error: variable
'xfer_len' set but not used [-Werror,-Wunused-but-set-variable]
u64 xfer_len = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230328001647.1778448-1-trix@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang with W=1 reports:
drivers/scsi/qedf/qedf_main.c:2227:6: error: variable
'num_handled' set but not used [-Werror,-Wunused-but-set-variable]
int num_handled = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230330203444.1842425-1-trix@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The validity of sock should be checked before assignment to avoid incorrect
values. Commit 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref
while calling getpeername()") introduced this change which may lead to
inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en.
Fix the issue by moving the position of the assignment.
Fixes: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()")
Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Link: https://lore.kernel.org/r/20230329071739.2175268-1-zhongjinghua@huaweicloud.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a memory leak reported by kmemleak:
unreferenced object 0xffffc900003f0000 (size 12288):
comm "modprobe", pid 19117, jiffies 4299751452 (age 42490.264s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000629261a8>] __vmalloc_node_range+0xe56/0x1110
[<0000000001906886>] __vmalloc_node+0xbd/0x150
[<000000005bb4dc34>] vmalloc+0x25/0x30
[<00000000a2dc1194>] qla2x00_create_host+0x7a0/0xe30 [qla2xxx]
[<0000000062b14b47>] qla2x00_probe_one+0x2eb8/0xd160 [qla2xxx]
[<00000000641ccc04>] local_pci_probe+0xeb/0x1a0
The root cause is traced to an error-handling path in qla2x00_probe_one()
when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is
used to record the port information and it is allocated in
qla2x00_create_host(). However, it is not released in the error handling
path "probe_failed".
Fix this by freeing the memory of "scan.l" when an error occurs in the
adapter initialization process.
Fixes: a4239945b8ad ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230325110004.363898-1-lizetao1@huawei.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang with W=1 reports:
drivers/scsi/scsi_transport_fc.c:908:6: error: variable
'desc_cnt' set but not used [-Werror,-Wunused-but-set-variable]
u32 desc_cnt = 0, bytes_remain;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230326003222.1343671-1-trix@redhat.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify the sr_open() by removing the goto label as the function only
returns one error code.
Signed-off-by: Enze Li <lienze@kylinos.cn>
Link: https://lore.kernel.org/r/20230327030237.3407253-1-lienze@kylinos.cn
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is exiting from the fault watchdog thread if it sees the 0xF002
(Soft reset in progress) fault code.
If the driver initiates the soft reset, then the driver restarts the
watchdog at the end of the soft reset completion. However, if the soft
reset is initiated by the firmware asynchronously, then the driver will
never restart the watchdog and never re-initialize the controller after the
asynchronous soft reset completion.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230331122317.11391-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a disk is removed with in-flight I/O, the application needs to wait
for 30 seconds (depending on the timeout configuration) to hear back from
the kernel. Xingui tried to fix this issue by aborting the ATA link for
SATA devices[1], however this approach left the SAS devices unresolved.
Try to fix this issue by aborting all in-flight requests when the device is
gone. This is implemented by iterating over the tagset.
[1] https://lore.kernel.org/lkml/234e04db-7539-07e4-a6b8-c6b05f78193d@opensource.wdc.com/T/
Cc: Xingui Yang <yangxingui@huawei.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230330110930.175539-1-yanaijie@huawei.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Four small fixes, three in drivers. The core fix is yet another
attempt to insulate us from UFS devices' weird behaviour for VPD
pages.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZCX0NCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSz5AQDiKfGd
tTA/Ff24pGzvqFfsU9R8vbV/ROKxiC9yAf9OGwEA9racOhJOi0FWNwkM0M3hwBG6
I4T0jp+ItbdSwbONV+Q=
=ltqk
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers. The core fix is yet another
attempt to insulate us from UFS devices' weird behaviour for VPD
pages"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Don't print sense pool info twice
scsi: core: Improve scsi_vpd_inquiry() checks
scsi: megaraid_sas: Fix crash after a double completion
scsi: megaraid_sas: Fix fw_crash_buffer_show()
Currently, MAX_SKB_FRAGS value is 17.
For standard tcp sendmsg() traffic, no big deal because tcp_sendmsg()
attempts order-3 allocations, stuffing 32768 bytes per frag.
But with zero copy, we use order-0 pages.
For BIG TCP to show its full potential, we add a config option
to be able to fit up to 45 segments per skb.
This is also needed for BIG TCP rx zerocopy, as zerocopy currently
does not support skbs with frag list.
We have used MAX_SKB_FRAGS=45 value for years at Google before
we deployed 4K MTU, with no adverse effect, other than
a recent issue in mlx4, fixed in commit 26782aad00cc
("net/mlx4: MLX4_TX_BOUNCE_BUFFER_SIZE depends on MAX_SKB_FRAGS")
Back then, goal was to be able to receive full size (64KB) GRO
packets without the frag_list overhead.
Note that /proc/sys/net/core/max_skb_frags can also be used to limit
the number of fragments TCP can use in tx packets.
By default we keep the old/legacy value of 17 until we get
more coverage for the updated values.
Sizes of struct skb_shared_info on 64bit arches
MAX_SKB_FRAGS | sizeof(struct skb_shared_info):
==============================================
17 320
21 320+64 = 384
25 320+128 = 448
29 320+192 = 512
33 320+256 = 576
37 320+320 = 640
41 320+384 = 704
45 320+448 = 768
This inflation might cause problems for drivers assuming they could pack
both the incoming packet (for MTU=1500) and skb_shared_info in half a page,
using build_skb().
v3: fix build error when CONFIG_NET=n
v2: fix two build errors assuming MAX_SKB_FRAGS was "unsigned long"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20230323162842.1935061-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
_base_allocate_sense_dma_pool() already prints out the sense pool
information, so don't print it a second time after calling it in
_base_allocate_memory_pools(). In addition the version in
_base_allocate_memory_pools() was using the wrong size value, sz, which was
last assigned when doing some nvme calculations instead of sense_sz to
determine the pool size in kilobytes.
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Fixes: 970ac2bb70e7 ("scsi: mpt3sas: Force sense buffer allocations to be within same 4 GB region")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230324193204.567932-1-jsnitsel@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some USB-SATA adapters have broken behavior when an unsupported VPD page is
probed: Depending on the VPD page number, a 4-byte header with a valid VPD
page number but with a 0 length is returned. Currently, scsi_vpd_inquiry()
only checks that the page number is valid to determine if the page is
valid, which results in receiving only the 4-byte header for the
non-existent page. This error manifests itself very often with page 0xb9
for the Concurrent Positioning Ranges detection done by sd_read_cpr(),
resulting in the following error message:
sd 0:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page
Prevent such misleading error message by adding a check in
scsi_vpd_inquiry() to verify that the page length is not 0.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20230322022211.116327-1-damien.lemoal@opensource.wdc.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a physical disk is attached directly "without JBOD MAP support" (see
megasas_get_tm_devhandle()) then there is no real error handling in the
driver. Return FAILED instead of SUCCESS.
Fixes: 18365b138508 ("megaraid_sas: Task management support")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230324150134.14696-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If crash_dump_buf is not allocated then crash dump can't be available.
Replace logical 'and' with 'or'.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230324135249.9733-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When cmdid == CMDID_INT_CMDS, the 'cmds' pointer is NULL but is
dereferenced below.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0f2bb84d2a68 ("[SCSI] megaraid: simplify internal command handling")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Link: https://lore.kernel.org/r/20230317175109.18585-1-listdansp@mail.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
It helps humans and the compiler if it is made explicit that SCSI host
templates are not modified. Hence this patch series that constifies most
SCSI host templates. Please consider this patch series for the next merge
window.
Link: https://lore.kernel.org/r/20230322195515.1267197-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make it explicit that the SCSI host template is not modified.
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-77-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make it explicit that the SCSI host template is not modified.
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-66-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make it explicit that the SCSI host template is not modified.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-63-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
