IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
A test with the command below gives for example this error:
arch/arm/boot/dts/rk3288-tinker.dt.yaml: tsadc: otp-gpio:
{'phandle': [[54]], 'rockchip,pins': [[0, 10, 0, 118]]}
is not of type 'array'
'gpio' is a sort of reserved nodename and should not be used
for pinctrl in combination with 'rockchip,pins', so change
nodes that end with 'gpio' to end with 'pin' or 'pins'.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/
dtschema/schemas/gpio/gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200524160636.16547-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This enables the Broadcom uart bluetooth driver on uart0 and gives it
ownership of its gpios. In order to use this, you must enable the
following kconfig options:
- CONFIG_BT_HCIUART_BCM
- CONFIG_SERIAL_DEV
This is applicable to rk3288-veyron series boards that use the bcm43540
wifi+bt chips.
As part of this change, also refactor the pinctrl across the various
boards. All the boards using broadcom bluetooth shouldn't touch the
bt_dev_wake pin.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20191127223909.253873-2-abhishekpandit@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
veyron jaq, jerry, minnie and speedy have mostly redundant regulator
and pinctrl configurations for the panel/backlight. Consolidate these
pieces in the eDP .dtsi.
Also change the default power supply for the panel to
'panel_regulator', instead of overriding it in all the board files.
pinky is the only device that uses 'vcc33_lcd' (the prior default),
so overwrite it in this case. pinky doesn't have a complete display
configuration, to keep things as they were delete the common nodes
that didn't exist previously in pinky's board file.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is like commit 0ca87bd5ba ("ARM: dts: rockchip: Add pin names
for rk3288-veyron-jerry") and commit ca3516b32c ("ARM: dts:
rockchip: Add pin names for rk3288-veyron-minnie") but for 3 more
veyron boards.
A few notes:
- While there is most certainly duplication between all the veyron
boards, it still feels like it is sane to just have each board have
a full list of its pin names. The format of "gpio-line-names" does
not lend itself to one-off overriding and besides it seems sane to
more fully match schematic names. Also note that the extra
duplication here is only in source code and is unlikely to ever
change (since these boards are shipped). Duplication in the .dtb
files is unavoidable.
- veyron-jaq and veyron-mighty are very closely related and so I have
shared a single list for them both with comments on how they are
different. This is just a typo fix on one of the boards, a possible
missing signal on one of the boards (or perhaps I was never given
the most recent schematics?) and dealing with the fact that one of
the two boards has full sized SD.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Raise the temperature of the GPU thermal trip point for speedy
to 80°C. This is the value used by the downstream Chrome OS 3.14
kernel, the 'official' kernel for speedy.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The values match those used by the downstream Chrome OS 3.14
kernel, the 'official' kernel for veyron devices. Keep the critical
trip point for speedy at 90°C as in the downstream configuration.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This value matches what is used by the downstream Chrome OS 3.14
kernel, the 'official' kernel for veyron devices. Keep the temperature
for 'speedy' at 90°C, as in the downstream kernel.
Increase the temperature for a hardware shutdown to 125°C, which
matches the downstream configuration and gives the system a chance
to shut down orderly at the criticial trip point.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Update all 32bit rockchip devicetree files to use SPDX-License-Identifiers.
All files except rk3288-veyron-analog-audio.dtsi (which is GPL 2.0 only)
claim to be GPL and X11 while the actual license text is MIT. Use the
MIT SPDX tag for them.
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Acked-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use macros to describe gpios will make the dts easier to
read and write.
All the modifications done with sed:
sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
.......
.......
sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
Tested with:
for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[also adapted the gpio interrupts]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Jerry and Speedy don't need any special handling wrt the backlight or
panel, so only need their backlight and panel-regulators hooked up.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>
Pinky boards don't have the hotplug pin connected. So remove the
hotplug pinctrl setting and enable the force-hpd option, to allow
them to find the display too.
While on speedy boards, the hotplug pin is connected, judging by comments
in a chromeos change it seems the "panels HPD voltage is too low to be
detected", so it also needs the forced hotplug, as we of course also know
that a display is connected.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>
The panels need a bit of time to actually turn on. If this isn't
observed, this results in problems when trying talk to the panels
and thus produces detection errors. 100ms seem to be a safe value
for the time being.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>
According to a commit on the ChromeOS kernel, the temperature of the Speedy
surface is over skin temperature spec. So adjust the thermal settings
to mimic the ChromeOS tree to stay within these spec limits.
Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com>
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Which is formally known as the Asus C201 chromebook
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
