IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Kunpeng930 hardware supports PF/VF communications. When the device is
reset, PF can send message to VF to stop function and restart function.
This patch adjusts the reset interface to support sending message through
PF/VF communication.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The result of gx modulo p is zero if gx is equal to p, so return
error immediately if gx is equal to p.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the key length is zero, use stdrng to generate private key
to pass the crypto ecdh-nist-p256 self test on vector 2.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixup the 3des algorithm minimum key size declaration.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add fallback tfm supporting for hisi_sec driver. Due to the hardware
not supports 192bit key length when using XTS mode. So the driver needs
to setting the soft fallback skcipher tfm for user.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new skcipher algorithms for Kunpeng930 SEC:
OFB(AES), CFB(AES), CTR(AES),
OFB(SM4), CFB(SM4), CTR(SM4).
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to Kunpeng930 adds new SQE data structure, the SEC driver needs
to be upgraded. It mainly includes bd parsing process and bd filling
process.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new type of sqe for Kunpeng930, which is the next generation
of SEC accelerator hardware. The hardware adds a new SQE data
structure.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds master enable (ME) interrupt handler in PF. Upon
receiving ME interrupt for a VF, PF clears it's transaction
pending bit.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT result format had changed for CN10K HW to accommodate more
fields. This patch adds support to use new result format and
new LMTST lines for CPT operations on CN10K platform.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On CN10K platform transmit/receive buffer alloc and free from/to
hardware had changed to support burst operation. Whereas pervious
silicon's only support single buffer free at a time.
To Support the same firmware allocates a DRAM region for each PF/VF for
storing LMTLINES. These LMTLINES are used to send CPT commands to HW.
PF/VF LMTST region is accessed via BAR4. PFs LMTST region is followed
by its VFs mbox memory. The size of region varies from 2KB to 256KB
based on number of LMTLINES configured.
This patch adds support for mapping of PF/VF LMTST region.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mailbox region configuration has some changes on CN10K platform
from OcteonTX2(CN9XX) platform.
On CN10K platform:
The DRAM region allocated to PF is enumerated as PF BAR4 memory.
PF BAR4 contains AF-PF mbox region followed by its VFs mbox region.
AF-PF mbox region base address is configured at RVU_AF_PFX_BAR4_ADDR
PF-VF mailbox base address is configured at
RVU_PF(x)_VF_MBOX_ADDR = RVU_AF_PF()_BAR4_ADDR+64KB. PF access its
mbox region via BAR4, whereas VF accesses PF-VF DRAM mailboxes via
BAR2 indirect access.
On CN9XX platform:
Mailbox region in DRAM is divided into two parts AF-PF mbox region and
PF-VF mbox region i.e all PFs mbox region is contiguous similarly all
VFs.
The base address of the AF-PF mbox region is configured at
RVU_AF_PF_BAR4_ADDR.
AF-PF1 mbox address can be calculated as RVU_AF_PF_BAR4_ADDR * mbox
size.
This patch changes mbox initialization to support both CN9XX and CN10K
platform.
This patch also removes platform specific name from the PF/VF driver name
to make it appropriate for all supported platforms.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This makes the IXP4xx driver probe from the device tree
and retrieve the NPE and two queue manager handled used
to process crypto from the device tree.
As the crypto engine is topologically a part of the NPE
hardware, we augment the NPE driver to spawn the
crypto engine as a child.
The platform data probe path is going away in due time,
for now it is an isolated else clause.
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ixp4xx_crypto driver traditionally registers a bare platform
device without attaching it to a driver, and detects the hardware
at module init time by reading an SoC specific hardware register.
Change this to the conventional method of registering the platform
device from the platform code itself when the device is present,
turning the module_init/module_exit functions into probe/release
driver callbacks.
This enables compile-testing as well as potentially having ixp4xx
coexist with other ARMv5 platforms in the same kernel in the future.
Cc: Corentin Labbe <clabbe@baylibre.com>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use memdup_user_nul() helper instead of open-coding to
simplify the code.
v1-->v2:
fixed patch title error
v2-->v3:
return the actual error
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hardware supports address prefetching to improve performance
before doing tasks in SVA scenario.
This patch enables this function in device initialization by writing
hardware registers. In the process of reset, address prefetching is
disabled to avoid the failure of interaction between accelerator device
and SMMU.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Compared with Kunpeng920, Kunpeng930 adds MSI configuration steps to wait
for the interrupt to be emptied. In order to be compatible with the
kunpeng920 driver, 'set_msi' callback is added in 'hisi_qm_hw_ops' to
configure hardware register. Call 'set_msi' to disable or enable MSI
during reset.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If Kunpeng 920 enabled the sva mode, the "qm alg register" process will
return directly. So the list of VF wasn't added to QM list.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add print information necessary if not use hardware crypto algs.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the sg count returned by dma_map_sg to call into
dmaengine_prep_slave_sg rather than using the original sg count. dma_map_sg
can merge consecutive sglist entries, thus making the original sg count
wrong. This is a fix for memory coruption issues observed while testing
encryption/decryption of large messages using libkcapi framework.
Patch has been tested further by running full suite of tcrypt.ko tests
including fuzz tests.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/ccp/ccp-dev.c:476: warning: Function parameter or member 'sp' not described in 'ccp_alloc_struct'
drivers/crypto/ccp/ccp-dev.c:476: warning: Excess function parameter 'dev' description in 'ccp_alloc_struct'
drivers/crypto/ccp/ccp-dev.c:476: warning: Function parameter or member 'sp' not described in 'ccp_alloc_struct'
drivers/crypto/ccp/ccp-dev.c:476: warning: Excess function parameter 'dev' description in 'ccp_alloc_struct'
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: John Allen <john.allen@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gary R Hook <gary.hook@amd.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/nx/nx-aes-gcm.c:26: warning: Function parameter or member 'tfm' not described in 'gcm_aes_nx_set_key'
drivers/crypto/nx/nx-aes-gcm.c:26: warning: Function parameter or member 'in_key' not described in 'gcm_aes_nx_set_key'
drivers/crypto/nx/nx-aes-gcm.c:26: warning: Function parameter or member 'key_len' not described in 'gcm_aes_nx_set_key'
drivers/crypto/nx/nx-aes-gcm.c:26: warning: expecting prototype for Nest Accelerators driver(). Prototype was for gcm_aes_nx_set_key() instead
drivers/crypto/nx/nx-aes-ecb.c:24: warning: Function parameter or member 'tfm' not described in 'ecb_aes_nx_set_key'
drivers/crypto/nx/nx-aes-ecb.c:24: warning: Function parameter or member 'in_key' not described in 'ecb_aes_nx_set_key'
drivers/crypto/nx/nx-aes-ecb.c:24: warning: Function parameter or member 'key_len' not described in 'ecb_aes_nx_set_key'
drivers/crypto/nx/nx-aes-ecb.c:24: warning: expecting prototype for Nest Accelerators driver(). Prototype was for ecb_aes_nx_set_key() instead
drivers/crypto/nx/nx-aes-ccm.c:26: warning: Function parameter or member 'tfm' not described in 'ccm_aes_nx_set_key'
drivers/crypto/nx/nx-aes-ccm.c:26: warning: Function parameter or member 'in_key' not described in 'ccm_aes_nx_set_key'
drivers/crypto/nx/nx-aes-ccm.c:26: warning: Function parameter or member 'key_len' not described in 'ccm_aes_nx_set_key'
drivers/crypto/nx/nx-aes-ccm.c:26: warning: expecting prototype for Nest Accelerators driver(). Prototype was for ccm_aes_nx_set_key() instead
drivers/crypto/nx/nx-aes-ctr.c:25: warning: Function parameter or member 'tfm' not described in 'ctr_aes_nx_set_key'
drivers/crypto/nx/nx-aes-ctr.c:25: warning: Function parameter or member 'in_key' not described in 'ctr_aes_nx_set_key'
drivers/crypto/nx/nx-aes-ctr.c:25: warning: Function parameter or member 'key_len' not described in 'ctr_aes_nx_set_key'
drivers/crypto/nx/nx-aes-ctr.c:25: warning: expecting prototype for Nest Accelerators driver(). Prototype was for ctr_aes_nx_set_key() instead
drivers/crypto/nx/nx-aes-xcbc.c:22: warning: cannot understand function prototype: 'struct xcbc_state '
drivers/crypto/nx/nx-sha256.c:21: warning: Function parameter or member 'tfm' not described in 'nx_crypto_ctx_sha256_init'
drivers/crypto/nx/nx-sha256.c:21: warning: expecting prototype for SHA(). Prototype was for nx_crypto_ctx_sha256_init() instead
drivers/crypto/nx/nx-sha512.c:20: warning: Function parameter or member 'tfm' not described in 'nx_crypto_ctx_sha512_init'
drivers/crypto/nx/nx-sha512.c:20: warning: expecting prototype for SHA(). Prototype was for nx_crypto_ctx_sha512_init() instead
drivers/crypto/nx/nx-842-pseries.c:280: warning: Function parameter or member 'wmem' not described in 'nx842_pseries_compress'
drivers/crypto/nx/nx-842-pseries.c:280: warning: Excess function parameter 'wrkmem' description in 'nx842_pseries_compress'
drivers/crypto/nx/nx-842-pseries.c:410: warning: Function parameter or member 'wmem' not described in 'nx842_pseries_decompress'
drivers/crypto/nx/nx-842-pseries.c:410: warning: Excess function parameter 'wrkmem' description in 'nx842_pseries_decompress'
drivers/crypto/nx/nx-842-pseries.c:523: warning: Function parameter or member 'devdata' not described in 'nx842_OF_set_defaults'
drivers/crypto/nx/nx-842-pseries.c:548: warning: Function parameter or member 'prop' not described in 'nx842_OF_upd_status'
drivers/crypto/nx/nx-842-pseries.c:582: warning: Function parameter or member 'devdata' not described in 'nx842_OF_upd_maxsglen'
drivers/crypto/nx/nx-842-pseries.c:582: warning: Function parameter or member 'prop' not described in 'nx842_OF_upd_maxsglen'
drivers/crypto/nx/nx-842-pseries.c:630: warning: Function parameter or member 'devdata' not described in 'nx842_OF_upd_maxsyncop'
drivers/crypto/nx/nx-842-pseries.c:630: warning: Function parameter or member 'prop' not described in 'nx842_OF_upd_maxsyncop'
drivers/crypto/nx/nx-842-pseries.c:692: warning: Cannot understand *
drivers/crypto/nx/nx-842-pseries.c:825: warning: Function parameter or member 'data' not described in 'nx842_OF_notifier'
drivers/crypto/nx/nx-842-pseries.c:825: warning: Excess function parameter 'update' description in 'nx842_OF_notifier'
Cc: Haren Myneni <haren@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/cavium/nitrox/nitrox_main.c:41: warning: cannot understand function prototype: 'const struct pci_device_id nitrox_pci_tbl[] = '
drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ndev' not described in 'write_to_ucd_unit'
drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ucode_size' not described in 'write_to_ucd_unit'
drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ucode_data' not described in 'write_to_ucd_unit'
drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'block_num' not described in 'write_to_ucd_unit'
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'index' not described in 'incr_index'
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'count' not described in 'incr_index'
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'max' not described in 'incr_index'
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: expecting prototype for Response codes from SE microcode(). Prototype was for incr_index() instead
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:287: warning: Function parameter or member 'cmdq' not described in 'post_se_instr'
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: Function parameter or member 'callback' not described in 'nitrox_process_se_request'
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: Function parameter or member 'cb_arg' not described in 'nitrox_process_se_request'
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: expecting prototype for nitrox_se_request(). Prototype was for nitrox_process_se_request() instead
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:535: warning: Function parameter or member 'cmdq' not described in 'process_response_list'
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:535: warning: expecting prototype for process_request_list(). Prototype was for process_response_list() instead
drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:584: warning: Function parameter or member 'data' not described in 'pkt_slc_resp_tasklet'
drivers/crypto/cavium/nitrox/nitrox_mbx.c:14: warning: cannot understand function prototype: 'enum mbx_msg_type '
drivers/crypto/cavium/nitrox/nitrox_mbx.c:24: warning: cannot understand function prototype: 'enum mbx_msg_opcode '
drivers/crypto/cavium/nitrox/nitrox_skcipher.c:26: warning: cannot understand function prototype: 'const struct nitrox_cipher flexi_cipher_table[] = '
drivers/crypto/cavium/cpt/cptpf_main.c:411: warning: Function parameter or member 'cpt' not described in 'cpt_unload_microcode'
drivers/crypto/cavium/cpt/cptpf_main.c:411: warning: expecting prototype for Ensure all cores are disengaged from all groups by(). Prototype was for cpt_unload_microcode() instead
drivers/crypto/cavium/cpt/cptvf_reqmanager.c:17: warning: Function parameter or member 'q' not described in 'get_free_pending_entry'
drivers/crypto/cavium/cpt/cptvf_reqmanager.c:17: warning: Function parameter or member 'qlen' not described in 'get_free_pending_entry'
Cc: George Cherian <gcherian@marvell.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix to return negative error code from the error handling
cases instead of 0.
Fixes: 9363efb4181c ("crypto: qce - Add support for AEAD algorithms")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the unused macro ICP_DH895XCC_PESRAM_BAR_SIZE in the firmware
loader.
This is to fix the following warning when compiling the driver using the
clang compiler with CC=clang W=2:
drivers/crypto/qat/qat_common/qat_uclo.c:345:9: warning: macro is not used [-Wunused-macros]
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check the return code of the function qat_hal_rd_rel_reg() and return it
to the caller.
This is to fix the following warning when compiling the driver with
clang scan-build:
drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the return status to error if MMP file size is too large so the
driver load fails early if a large MMP firmware is loaded.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change "sram_visible" to "mmp_sram_size" and compare it with the MMP
size to prevent an overly large MMP file being written to SRAM.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Save the return value of qat_uclo_map_auth_fw() function so that the
function qat_uclo_wr_mimage() could return the correct value.
This way, the procedure of adf_gen2_ae_fw_load() function could stop
and exit properly by checking the return value of qat_uclo_wr_mimage().
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If an error occurs after calling 'sp_get_irqs()', 'sp_free_irqs()' must be
called as already done in the error handling path.
Fixes: f4d18d656f88 ("crypto: ccp - Abstract interrupt registeration")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 could be able to close master ooo when NFE occurs, which will
disable memory accessing from device and execute tasks. This ensures that
errors do not spread.
This patch enables the hardware to close master ooo when an error occurs
by writing hardware registers, and ensures that the driver will not drain
qp because the hardware will empty the tasks automatically.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to avoid reporting an exception but the error type is not
configured, the driver needs to configure the error type first, and then
enable the error interrupt. Before executing the task, hardware error
initialization is needed so that the hardware can detect the error in time.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before device reset, the driver sets 'QM_RESETTING' flag, but after reset,
the wrong flag is cleared. This patch modifies the problem of inconsistent
flags.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The device needs to be initialized first, and then restart the queue to
execute tasks after PF reset.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sa_ul_probe creates child devices using of_platform_populate(),
but these are not cleaned up in driver remove. Clean these up
by removing the child devices using of_platform_depopulate().
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the platform_get_resource() and devm_ioremap_resource()
calls with devm_platform_ioremap_resource(). Also add error checking
and move up this block to simplify the cleanup in sa_ul_probe().
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the probe function by using the of_device_get_match_data()
helper instead of open coding. The logic is also moved up to fix the
missing pm_runtime cleanup in case of a match failure.
Fixes: 0bc42311cdff ("crypto: sa2ul - Add support for AM64")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The pm_runtime APIs added first in commit 7694b6ca649f ("crypto: sa2ul -
Add crypto driver") are not unwound properly and was fixed up partially
in commit 13343badae09 ("crypto: sa2ul - Fix PM reference leak in
sa_ul_probe()"). This fixed up the pm_runtime usage count but not the
state. Fix this properly.
Fixes: 13343badae09 ("crypto: sa2ul - Fix PM reference leak in sa_ul_probe()")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sa_dma_init() function doesn't release the requested dma channels
on all failure paths. Any failure in this function also ends up
leaking the dma pool created in sa_init_mem() in the sa_ul_probe()
function. Fix all of these issues.
Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use 'GENMASK' to generate mask value, just make the code clearer.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove complex macro of 'HPRE_DEV' and replace with the initialized
device pointer.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Functional macro lacks type checking, which is not as strict as function
call checking.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Only init a structure member each line, just to keep the code neat.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The macro 'HPRE_ADDR' is unnecessary, so expanding it.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
