IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This contains a bunch of changes all across the board. Perhaps the most
notable introduction here is support for the Jetson Nano Developer Kit.
-----BEGIN PGP SIGNATURE-----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=V3kv
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.2-rc1
This contains a bunch of changes all across the board. Perhaps the most
notable introduction here is support for the Jetson Nano Developer Kit.
* tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Remove regulator hacks on Jetson TX2
arm64: tegra: Enable XUSB on P2771
arm64: tegra: Add XUSB and pad controller on Tegra186
arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support
arm64: tegra: smaug: Move PLL power supplies to XUSB pad controller
arm64: tegra: jetson-tx1: Move PLL power supplies to XUSB pad controller
arm64: tegra: Enable command queue for Tegra186 SDMMC4
arm64: tegra: Fix default tap and trim values
arm64: tegra: Add supply for temperature sensor on P2888
arm64: tegra: Enable aconnect, ADMA and AGIC on Jetson TX1
arm64: tegra: Add L2 cache topology to Tegra210
arm64: tegra: Enable CPU idle support for Shield
arm64: tegra: Enable CPU idle support for Smaug
arm64: tegra: Enable CPU idle support for Jetson TX1
arm64: tegra: Add CPU idle states properties for Tegra210
arm64: tegra: Fix timer node for Tegra210
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add base support for Agilex platform
- Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform
- Increase Stratix10 QSPI support to 100 MHz
-----BEGIN PGP SIGNATURE-----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=PxBZ
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.2
- Add base support for Agilex platform
- Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform
- Increase Stratix10 QSPI support to 100 MHz
* tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA
arm64: dts: stratix10: increase QSPI max frequency to 100MHz
arm64: dts: stratix10: enable MMC highspeed support
ARM: dts: socfpga: enable MMC highspeed support
Signed-off-by: Olof Johansson <olof@lixom.net>
* Hi3660 SoC and related boards:
- Added DMA support for the uart nodes
- Added the asp DMA controller node
- Replaced dma-min-chan with dma-channel-mask to follow the binding
* Hi3670 SoC and related boards:
- Reused Hi3660 reset to support Hi3670, updated the binding
document and added dts node
- Reused Hi3660 MMC controller to support Hi3670, updated the
binding document and added related nodes to support SD and WiFi
for the SoC and hikey970 board
- Added UFS controller node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJctKRtAAoJEAvIV27ZiWZcHWUP/2adwR95p9SDb4WUZsmxWAPm
W3vveeLqack6K70ySStBmNCgrTyW5txJcJOFU4ceoERBOkpEfWJV6SEuWMma0ssW
Vz4Zs15T+d6Pz2UbIi7owhj1ooyxVuJpPwZRFMs0esD8d92ZuptTWAnnbyA5WCKB
Obvucl04QUHpzmCQAPKXW2icQFmGPCA+UOviSR/0Kj00XDhmxVkpUl54fe16r6e+
keVT5ElVuI4SZax5BPIHiUryKbujL6A+n7y3goV57MGkKhklJ78BRb3czxLUpgSq
xyqfYYnpTGszZ/gNIIYohHvp1N09dMXXhmIt22zfUCpG+1ClquK8oDtZzDBAl0wV
ZtXn1Khb+D96nzZobYIEhKX0ki76OeRIJAj1gxLkpMJkhp8amGLmeVJP6ER88zuN
ypVSpXfPnOAeGGcrVUIXhYIGqBWinM7iCasX9lctkD+Mui0bBjaF5NFWuNAIo74w
N57yNRQRdK0CMxuyU57lrxPzlmWibnSx3gVz8BXTSBBXDkTefmwKITDjyJ8swo8m
voeBOAYOdbdCKWaU5Nh1DAfBorvP3MPXi33KkdTUaMzkd5pqbNq02IqG7DlFE3L1
CMw4PnCgLoVVN8s7ud8l1wiXkeXJSgskE2P/c57/4t4cGargC8xyz8ALXobCJFGq
N795O6Za9LYzTQyLpyzn
=9+Sr
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.2
* Hi3660 SoC and related boards:
- Added DMA support for the uart nodes
- Added the asp DMA controller node
- Replaced dma-min-chan with dma-channel-mask to follow the binding
* Hi3670 SoC and related boards:
- Reused Hi3660 reset to support Hi3670, updated the binding
document and added dts node
- Reused Hi3660 MMC controller to support Hi3670, updated the
binding document and added related nodes to support SD and WiFi
for the SoC and hikey970 board
- Added UFS controller node
* tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi3670: Add UFS controller support
arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask
arm64: dts: hi3660: Add hisi asp dma device
arm64: dts: hi3660: Add dma to uart nodes
arm64: dts: hisilicon: hikey970: Add SD and WiFi support
arm64: dts: hisilicon: hi3670: Add MMC controller support
dt-bindings: mmc: Add HI3670 MMC controller binding
arm64: dts: hisilicon: hi3670: Add reset controller support
dt-bindings: reset: Add HI3670 reset controller binding
Signed-off-by: Olof Johansson <olof@lixom.net>
- Align xlnx-zynqmp-clk.h file name and separate
binding for clock driver
- Add TI quirks to zynqmp boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAly0Q7IACgkQykllyylKDCHtLACfZGBpUNq5coHf3tQohyNyROnh
q9cAn11bsVu3/BDOYhAO9TzKuYtzCACh
=n0Wu
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx into arm/dt
arm64: dts: zynqmp: DT changes for v5.2
- Align xlnx-zynqmp-clk.h file name and separate
binding for clock driver
- Add TI quirks to zynqmp boards
* tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: dt: Add TI PHY quirk
dt-bindings: xilinx: Separate clock binding from firmware doc
include: dt-binding: clock: Rename zynqmp header file
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Use proper clock rates for GSCALER module on TM2 boards.
2. Add clocks for local paths on DECON and GSCALER modules of
Exynos5433.
3. Add Slim SecuritySubSystem to Exynos5433.
-----BEGIN PGP SIGNATURE-----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=hXn6
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.2
1. Use proper clock rates for GSCALER module on TM2 boards.
2. Add clocks for local paths on DECON and GSCALER modules of
Exynos5433.
3. Add Slim SecuritySubSystem to Exynos5433.
* tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add SlimSSS to Exynos5433
arm64: dts: exynos: add DSD/GSD clocks to DECONs and GSCALERs of Exynos5433
arm64: dts: exynos: configure GSCALER related clocks on TM2
Signed-off-by: Olof Johansson <olof@lixom.net>
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and
NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also
directly got some additional features added after the boards itself.
The Rock960 family (rock960+ficus) got their power-tree cleaned to match
the schematics and also got hdmi-audio and their gpu enabled.
Mali support also got enabled on the RockPi4 and finally both
rk3328-rock64 and rk3328-roc-cc got some additional features.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlyjIrAQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgTCuB/9wEiNDr5DvIYHdQM0/TrAWzMepdaO2YAHI
5v2NaZ3l0LDB1yXEJUJn/f7PRbGW9IETaldXLWKca8g8zJq6tM60p4gWx0XHw2hq
szajRwBhbvo16u3vSNOJ1LlK8SdfI+ENx9129qWVtXToODK/0TIo+ubOpPT3uBxt
P2Og+2F0zoj1WSWTXPEaGexF0YnwRp1v5NODF9XV6jpB9wAL+CYsllse7GFLxc52
sdp2Lfp/r/3VzHOCDOJ8e9YPXmLIYrjBQNw12/XkGdbnMKucCnI8GYxdkU7gSUh8
9ryBAAjOWREopY8GwdBfX+C+l1AKUFi8YFvC6PCxqFoseglzvAK0
=/JXo
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Core new soc features are hdmi-cec for rk3328, scheduler capacity-values
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and
NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also
directly got some additional features added after the boards itself.
The Rock960 family (rock960+ficus) got their power-tree cleaned to match
the schematics and also got hdmi-audio and their gpu enabled.
Mali support also got enabled on the RockPi4 and finally both
rk3328-rock64 and rk3328-roc-cc got some additional features.
* tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma
arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy.
arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller.
arm64: dts: rockchip: Add nanopi4 ethernet phy
arm64: dts: rockchip: Add PWM fan for NanoPC-T4
arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi
arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911)
arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi
arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus
arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960
arm64: dts: rockchip: Add Nanopi NEO4 initial support
arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64
arm64: dts: rockchip: Add support for the Orange Pi RK3399 board.
arm64: dts: rockchip: enable mali on rock960 boards
arm64: dts: rockchip: enable mali on Rock Pi 4
arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes
arm64: dts: rockchip: give some life to the rk3328-roc-cc leds
arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328
arm64: dts: rockchip: add ir-receiver node on rk3328-rock64
arm64: dts: rockchip: add leds node on rk3328-rock64
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Various regulators were marked as always-on for Jetson TX2. At this
point, all of the regulators are properly hooked up, so this workaround
is no longer required.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the relevant pads for XUSB support on P2771-0000 and hook up the
USB supply voltage regulators to the ports.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Jetson Nano Developer Kit is a Tegra X1 based development board. It
is similar to Jetson TX1 but it is not pin compatible. It features 4 GB
of LPDDR4, an SPI NOR flash for early boot firmware and an SD card slot
used for storage.
HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0
and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI
Ethernet controller provides onboard network connectivity. An M.2 Key-E
slot with PCIe x1 adds additional possibilities.
A 40-pin header on the board can be used to extend the capabilities and
exposed interfaces of the Jetson Nano.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The XUSB pad controller is responsible for supplying power to the PLLs
used to drive the various USB, PCI and SATA pads. Move the PLL power
supplies from the PCIe and XUSB controllers to the XUSB pad controller
to make sure they are available when needed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The XUSB pad controller is responsible for supplying power to the PLLs
used to drive the various USB, PCI and SATA pads. Move the PLL power
supplies from the PCIe and XUSB controllers to the XUSB pad controller
to make sure they are available when needed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The workaround for a hardware bug preventing this from working has been
merged now, so command queue support can be enabled again for Tegra186.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Default tap and trim values are incorrect for Tegra186 SDMMC4. This
patch fixes them.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The VCC supply property is not populated for the temperature sensor on
the P2888 board and so the following warning is observed on boot ...
lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
On the P2888 board, the VCC supply for the temperature sensor is
connected to the 'vdd_1v8ls' rail. Add the 'vcc-supply' property for
the temperature sensor to prevent this warning message from occurring.
Fixes: 8b457812f54b ('arm64: tegra: Add temperature sensor on P2888')
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
These are currently mostly unused because we lack a proper audio driver
on Tegra210. However, enabling them makes sure that at least their probe
code paths are tested at runtime.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add L2 cache and make it the next level of cache for each of the CPUs.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable CPU idle support for Smaug platform.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable CPU idle support for Jetson TX1 platform.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add idle states properties for generic ARM CPU idle driver. This
includes a cpu-sleep state which is the power down state of CPU cores.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix timer node to make it work with Tegra210 timer driver.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
A undocumented and unimplemented binding got into the hi3660
dtsi, and this switches that binding to the now documented one.
Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Try to add DMA support to the uart nodes following
the assignments made in the dts from the victoria vendor kernel
here:
https://consumer.huawei.com/en/opensource/detail/?siteCode=worldwide&keywords=p10&fileType=openSourceSoftware&pageSize=10&curPage=1
Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add SD and WiFi support for HiKey970 board based on HI3670 SoC. Due to
the absence of the PMIC driver, fixed regulators are sourced to make the
driver working.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add MMC controller support for HiSilicon HI3670 SoC reusing the HI3660
Designware MMC driver. There are 2 DWMMC controllers present in this SoC:
1. DWMMC1 is used for SD card (SD)
2. DWMMC2 is used for WiFi (SDIO)
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
In order to handle Video Output and later on Video decoding,
add a reserved CMA pool with a similar 256MiB size as other SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable the Bluetooth Module on the X96 Max Set-Top-Box.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add system regulators for the X96 Max Set-Top-Box.
Still missing
* VDD_EE (0.8V - PWM controlled)
* VDD_CPU (PWM controlled)
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The RK3399-Q7 (Puma) requires 33 Ohm drive strength to ensure signal
integrity at HS-400 (200MHz clock, DDR signalling).
A repeated EMC testing run validates that this increase does not
negatively impact EMC compliance (emissions have ample distance to
the regulatory limits).
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A previous patch introduced the property 'drive-impedance-ohm'
for the RK3399's emmc phy node. This patch sets this value
explicitly to the default value of 50 Ohm.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When using direct commands (DCMDs) on an RK3399, we get spurious
CQE completion interrupts for the DCMD transaction slot (#31):
[ 931.196520] ------------[ cut here ]------------
[ 931.201702] mmc1: cqhci: spurious TCN for tag 31
[ 931.206906] WARNING: CPU: 0 PID: 1433 at /usr/src/kernel/drivers/mmc/host/cqhci.c:725 cqhci_irq+0x2e4/0x490
[ 931.206909] Modules linked in:
[ 931.206918] CPU: 0 PID: 1433 Comm: irq/29-mmc1 Not tainted 4.19.8-rt6-funkadelic #1
[ 931.206920] Hardware name: Theobroma Systems RK3399-Q7 SoM (DT)
[ 931.206924] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 931.206927] pc : cqhci_irq+0x2e4/0x490
[ 931.206931] lr : cqhci_irq+0x2e4/0x490
[ 931.206933] sp : ffff00000e54bc80
[ 931.206934] x29: ffff00000e54bc80 x28: 0000000000000000
[ 931.206939] x27: 0000000000000001 x26: ffff000008f217e8
[ 931.206944] x25: ffff8000f02ef030 x24: ffff0000091417b0
[ 931.206948] x23: ffff0000090aa000 x22: ffff8000f008b000
[ 931.206953] x21: 0000000000000002 x20: 000000000000001f
[ 931.206957] x19: ffff8000f02ef018 x18: ffffffffffffffff
[ 931.206961] x17: 0000000000000000 x16: 0000000000000000
[ 931.206966] x15: ffff0000090aa6c8 x14: 0720072007200720
[ 931.206970] x13: 0720072007200720 x12: 0720072007200720
[ 931.206975] x11: 0720072007200720 x10: 0720072007200720
[ 931.206980] x9 : 0720072007200720 x8 : 0720072007200720
[ 931.206984] x7 : 0720073107330720 x6 : 00000000000005a0
[ 931.206988] x5 : ffff00000860d4b0 x4 : 0000000000000000
[ 931.206993] x3 : 0000000000000001 x2 : 0000000000000001
[ 931.206997] x1 : 1bde3a91b0d4d900 x0 : 0000000000000000
[ 931.207001] Call trace:
[ 931.207005] cqhci_irq+0x2e4/0x490
[ 931.207009] sdhci_arasan_cqhci_irq+0x5c/0x90
[ 931.207013] sdhci_irq+0x98/0x930
[ 931.207019] irq_forced_thread_fn+0x2c/0xa0
[ 931.207023] irq_thread+0x114/0x1c0
[ 931.207027] kthread+0x128/0x130
[ 931.207032] ret_from_fork+0x10/0x20
[ 931.207035] ---[ end trace 0000000000000002 ]---
The driver shows this message only for the first spurious interrupt
by using WARN_ONCE(). Changing this to WARN() shows, that this is
happening quite frequently (up to once a second).
Since the eMMC 5.1 specification, where CQE and CQHCI are specified,
does not mention that spurious TCN interrupts for DCMDs can be simply
ignored, we must assume that using this feature is not working reliably.
The current implementation uses DCMD for REQ_OP_FLUSH only, and
I could not see any performance/power impact when disabling
this optional feature for RK3399.
Therefore this patch disables DCMDs for RK3399.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
Cc: stable@vger.kernel.org
[the corresponding code changes are queued for 5.2 so doing that as well]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Salvator-X and XS boards have a 4 lines DIP switch and 3 push
buttons connected to SoC GPIOs, meant to be used as general-purpose test
keys. Add a corresponding node in DT, mapping (semi-randomly) the DIP
switch to keys 1-4 and the push buttons to keys A-C.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Basic audio dmac register only supports busif from 0 to 3,
in order to use busif4 ~ busif7, extended audio dmac register
need to be used.
This patch updates H3 (= r8a7795), M3-W (= r8a7796) and
M3-N (=r8a77965) to use extended audio dmac register set.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of
August 24, 2018, the TX clock internal Delay mode does'nt support
on R-Car D3. This patch fixes EthernetAVB phy mode to rgmii.
This is achieved by simply dropping the phy-mode property from
r8a77995-draak.dts as the default property for this for r8a77995,
as set in r8a77995.dtsi, is "rgmii".
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Ulrich Hecht <uli+renesas@fpond.eu>
This patch sorts the node label to improve maintainability.
The sort has been done alphabetically with the node label name as the
key.
This patch does not include functional changes.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Update Ebisu and Draak bootargs to match other boards
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression
that is causing accesses to the file-system on the eMMC to fail. Errors
such as the following have been observed ...
mmc2: running CQE recovery
mmc2: mmc_select_hs400 failed, error -110
print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
mmc2: cqhci: CQE failed to exit halt state
For now disable CQE support for Tegra186 until this issue is resolved.
Fixes: dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add pinctrl on the always-enabled debug UART AO.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add pinctrl on the always-enabled debug UART AO.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add pinctrl on the always-enabled debug UART AO.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
