IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The clock for this driver switched to the common clock controller driver.
Therefore, update common clock properties for ethernet device in the binding
document.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce dts bindings for mt7986 soc in mediatek,net.yaml.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current title of our section of the documentation is
Linux Networking Documentation. Since we're describing
a section of Linux Documentation repeating those two
words seems redundant.
Link: https://lore.kernel.org/r/20220518234346.2088436-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as
well as providing the reference clock on CLK25_REF.
Add DT properties to configure both pins.
Technically the phy also supports a recovered 125MHz clock for
synchronous ethernet. However SyncE should be configured dynamically at
runtime, so it is explicitly omitted in this binding.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ARM SoC fixes from Arnd Bergmann:
"The SoC bug fixes have calmed down sufficiently, there is one minor
update for the MAINTAINERS file, and few bug fixes for dts
descriptions:
- Updates to the BananaPi R2-Pro (rk3568) dts to match production
hardware rather than the prototype version.
- Qualcomm sm8250 soundwire gets disabled on some machines to avoid
crashes
- A number of aspeed SoC specific fixes, addressing incorrect pin
cotrol settings, some values in the romed8hm board, and a revert
for an accidental removal of a DT node"
* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: omap: remove me as a maintainer
ARM: dts: aspeed: Add video engine to g6
ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
arm64: dts: rockchip: Change io-domains of bpi-r2-pro
When the binding was converted it appeared necessary to set
'unevaluatedProperties: true' because of the switch devices on the
turris-mox board. Actually the error was because of the reg property
being incorrect causing the rest of the properties to be unevaluated.
After the reg properties are fixed for turris-mox we can set
'unevaluatedProperties: false' as is generally expected.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two issues were observed in the ReST doc added by commit c3a0addefbde
("docs: ctucanfd: CTU CAN FD open-source IP core documentation.")
with Sphinx versions 2.4.4 and 4.5.0.
The plain "figure" directive broke "make pdfdocs" due to a missing
PDF figure. For conversion of SVG -> PDF to work, the "kernel-figure"
directive, which is an extension for kernel documentation, should
be used instead.
The directive of "code:: raw" causes a warning from both
"make htmldocs" and "make pdfdocs", which reads:
[...]/can/ctu/ctucanfd-driver.rst:75: WARNING: Pygments lexer name
'raw' is not known
A plain literal-block marker should suffice where no syntax
highlighting is intended.
Fix the issues by using suitable directive and marker.
Fixes: c3a0addefbde ("docs: ctucanfd: CTU CAN FD open-source IP core documentation.")
Link: https://lore.kernel.org/all/5986752a-1c2a-5d64-f91d-58b1e6decd17@gmail.com
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: Martin Jerabek <martin.jerabek01@gmail.com>
Cc: Ondrej Ille <ondrej.ille@gmail.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since commit
| 1f9234401ce0 ("dt-bindings: can: add can-controller.yaml")
there is a common CAN controller binding. Add this to the ctucanfd
binding.
Cc: Ondrej Ille <ondrej.ille@gmail.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Renesas R-Car CAN FD Controller always uses two or more interrupts.
Make the interrupt-names properties a required property, to make it
easier to identify the individual interrupts.
Update the example accordingly.
Link: https://lore.kernel.org/all/a68e65955e0df4db60233d468f348203c2e7b940.1651512451.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
commit 68822bdf76f1 ("net: generalize skb freeing
deferral to per-cpu lists") added another per-cpu
cache of skbs. It was expected to be small,
and an IPI was forced whenever the list reached 128
skbs.
We might need to be able to control more precisely
queue capacity and added latency.
An IPI is generated whenever queue reaches half capacity.
Default value of the new limit is 64.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the Ethernet AVB IP found on RZ/V2M SoC.
It includes the Ethernet controller (E-MAC) and Dedicated Direct memory
access controller (DMAC) for transferring transmitted Ethernet frames
to and received Ethernet frames from respective storage areas in the
RAM at high speed.
The AVB-DMAC is compliant with IEEE 802.1BA, IEEE 802.1AS timing and
synchronization protocol, IEEE 802.1Qav real-time transfer, and the
IEEE 802.1Qat stream reservation protocol.
R-Car has a pair of combined interrupt lines:
ch22 = Line0_DiA | Line1_A | Line2_A
ch23 = Line0_DiB | Line1_B | Line2_B
Line0 for descriptor interrupts (which we call dia and dib).
Line1 for error related interrupts (which we call err_a and err_b).
Line2 for management and gPTP related interrupts (mgmt_a and mgmt_b).
RZ/V2M hardware has separate interrupt lines for each of these.
It has 3 clocks; the main AXI clock, the AMBA CHI (Coherent Hub
Interface) clock and a gPTP reference clock.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
This is v2 including deadlock fix in conntrack ecache rework
reported by Jakub Kicinski.
The following patchset contains Netfilter updates for net-next,
mostly updates to conntrack from Florian Westphal.
1) Add a dedicated list for conntrack event redelivery.
2) Include event redelivery list in conntrack dumps of dying type.
3) Remove per-cpu dying list for event redelivery, not used anymore.
4) Add netns .pre_exit to cttimeout to zap timeout objects before
synchronize_rcu() call.
5) Remove nf_ct_unconfirmed_destroy.
6) Add generation id for conntrack extensions for conntrack
timeout and helpers.
7) Detach timeout policy from conntrack on cttimeout module removal.
8) Remove __nf_ct_unconfirmed_destroy.
9) Remove unconfirmed list.
10) Remove unconditional local_bh_disable in init_conntrack().
11) Consolidate conntrack iterator nf_ct_iterate_cleanup().
12) Detect if ctnetlink listeners exist to short-circuit event
path early.
13) Un-inline nf_ct_ecache_ext_add().
14) Add nf_conntrack_events autodetect ctnetlink listener mode
and make it default.
15) Add nf_ct_ecache_exist() to check for event cache extension.
16) Extend flowtable reverse route lookup to include source, iif,
tos and mark, from Sven Auhagen.
17) Do not verify zero checksum UDP packets in nf_reject,
from Kevin Mitchell.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is one fix, and 3 documentation updates for 5.18-rc7.
The fix is for the firmware loader which resolves a long-reported
problem where the credentials of the firmware loader could be set to a
userspace process without enough permissions to actually load the
firmware image. Many Android vendors have been reporting this for quite
some time.
The documentation updates are for the embargoed-hardware-issues.rst file
to add a new entry, change an existing one, and sort the list to make
changes easier in the future.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoEMSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynl8wCgw54h8hggK6eikgctGuyoLJZjDR4AnRVNvtQi
ItQ1+zHzBjkdz1s/DlM7
=/7MV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is one fix, and three documentation updates for 5.18-rc7.
The fix is for the firmware loader which resolves a long-reported
problem where the credentials of the firmware loader could be set to a
userspace process without enough permissions to actually load the
firmware image. Many Android vendors have been reporting this for
quite some time.
The documentation updates are for the embargoed-hardware-issues.rst
file to add a new entry, change an existing one, and sort the list to
make changes easier in the future.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation/process: Update ARM contact for embargoed hardware issues
Documentation/process: Add embargoed HW contact for Ampere Computing
Documentation/process: Make groups alphabetical and use tabs consistently
firmware_loader: use kernel credentials when reading firmware
This adds the new nf_conntrack_events=2 mode and makes it the
default.
This leverages the earlier flag in struct net to allow to avoid
the event extension as long as no event listener is active in
the namespace.
This avoids, for most cases, allocation of ct->ext area.
A followup patch will take further advantage of this by avoiding
calls down into the event framework if the extension isn't present.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No conflicts.
Build issue in drivers/net/ethernet/sfc/ptp.c
54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static")
49e6123c65da ("net: sfc: fix memory leak due to ptp channel")
https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add KRYO4XX gold/big cores to the list of CPUs that need the
repeat TLBI workaround. Apply this to the affected
KRYO4XX cores (rcpe to rfpe).
The variant and revision bits are implementation defined and are
different from the their Cortex CPU counterparts on which they are
based on, i.e., (r0p0 to r3p0) is equivalent to (rcpe to rfpe).
Signed-off-by: Shreyas K K <quic_shrekk@quicinc.com>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Link: https://lore.kernel.org/r/20220512110134.12179-1-quic_shrekk@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Looks like all the changes to this driver had been tree-wide
refactoring since git era begun. The driver is using virt_to_bus()
we should make it use more modern DMA APIs but since it's unlikely
to be getting any use these days delete it instead. We can always
revert to bring it back.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Long time ago Tom added a giant comment to skbuff.h explaining
checksums. Now that we have a place in Documentation for skbuff
docs we should render it. Sprinkle some markup while at it.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comment about shinfo->dataref split is really unhelpful,
at least to me. Rewrite it and render it to skb documentation.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add basic skb documentation. It's mostly an intro to the subsequent
patches - it would looks strange if we documented advanced topics
without covering the basics in any way.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With Grant taking a prominent role in Linaro, I will take over as the
process ambassador for ARM w.r.t. embargoed hardware issues.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Grant Likely <grant.likely@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add bindings documentation for Sunplus SP7021 SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The list appears to be grouped by type (silicon, software, cloud) and
mostly alphabetical within each group, with a few exceptions.
Before adding to it, cleanup the list to be alphabetical within the
groups, and use tabs consistently throughout the list.
Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Link: https://lore.kernel.org/r/ec574b5d55584a3adda9bd31b7695193636ff136.1650995848.git.darren@os.amperecomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Drop unused 'max-link-speed' in Apple PCIe
- More redundant 'maxItems/minItems' schema fixes
- Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'
- Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding
- Add missing 'power-domains' property to Cadence UFSHC
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmJz6UAQHHJvYmhAa2Vy
bmVsLm9yZwAKCRD6+121jbxhw1wzEACPQm9LVVSFxeevPMPfWEO3CqYdVYaLt2w9
AnQHng8OkUJkN5lEdhQdyrYpJpvYlqVJVx7FeXr839nBi+qzdCszeWEu3WH6+Tw3
HNp43QarhRAi5XyV87jBFQeuFONBBHEvOKuoqE8jQ/aFZ6hEOdrSQ9JVpcC5LPOK
dvokPcHaKQElWVa1oG4hqJjoEHvTQNo391+L/PmCxLBlIIWkSX/BtEnXKioes0nm
EXoYoMNQHsH3RtZThGb+NpafOgLE8oRODTJx+Q1zUDw9MEJHQCXEBv4Y+ene1pkg
KkMaPGXNQbI6XQaVSBXHXHkx1vh6BE400MlHpOpeXau+psjYzEF96ePpe2GYq3GY
TRFGvIj6W/We5VLdVlJ94CIdZAs1qSYQ0qIgzbg5pj7SK7KNLojkZiozg+qa5xXL
5Z1VQGmaTMqLukUmLjFpF63Zdxm2AmgifbQTO1eZTFC9xPB3mKoIuIXojr/5g84u
Jc05xNz/mbCnOwN3WNYLqc4bVS2bDhutfpDJOnn47RHI3vBhYiY1Xohe+Vm+Xu5s
6hKKxTn/2QW0dubn9/5BLfvNuH9/3jg0Pw0f/orJcBdI1OuLKCuNhAO4PTjFOAAZ
6wy5W5GOGwE7HgJGdb9BNQY0FHmaxL9lMWQrUuJ6yF7ghNKI2gO1MFWnzjYbsMaC
V91pihSiCg==
=fpGC
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Drop unused 'max-link-speed' in Apple PCIe
- More redundant 'maxItems/minItems' schema fixes
- Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'
- Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding
- Add missing 'power-domains' property to Cadence UFSHC
* tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pci: apple,pcie: Drop max-link-speed from example
dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
dt-bindings: ufs: cdns,ufshc: Add power-domains
In commit 4fdabd509df3 ("dt-bindings: net: lan966x: remove PHY reset")
the PHY reset was removed, but I failed to remove it from the example.
Fix it.
Fixes: 4fdabd509df3 ("dt-bindings: net: lan966x: remove PHY reset")
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220503132038.2714128-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We no longer use these since 111659c2a570 (and they never worked
anyway); drop them from the example to avoid confusion.
Fixes: 111659c2a570 ("arm64: dts: apple: t8103: Remove PCIe max-link-speed properties")
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502091308.28233-1-marcan@marcan.st
Another round of removing redundant minItems/maxItems when 'items' list is
specified. This time it is in if/then schemas as the meta-schema was
failing to check this case.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Link: https://lore.kernel.org/r/20220503162738.3827041-1-robh@kernel.org
A few platforms, at91 and tegra, use drive-push-pull and
drive-open-drain with a 0 or 1 value. There's not really a need for values
as '1' should be equivalent to no value (it wasn't treated that way) and
drive-push-pull disabled is equivalent to drive-open-drain. So dropping the
value can't be done without breaking existing OSs. As we don't want new
cases, mark the case with values as deprecated.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220429194610.2741437-1-robh@kernel.org
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
Major changes:
new drivers
* wfx: silicon labs devices
* plfxlc: pureLiFi X, XL, XC devices
mac80211
* host based BSS color collision detection
* prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
* support TP-Link T2E devices
rtw89
* support firmware crash simulation
* preparation for 8852ce hardware support
ath11k
* Wake-on-WLAN support for QCA6390 and WCN6855
* device recovery (firmware restart) support for QCA6390 and WCN6855
* support setting Specific Absorption Rate (SAR) for WCN6855
* read country code from SMBIOS for WCN6855/QCA6390
* support for WCN6750
wcn36xx
* support for transmit rate reporting to user space
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmJxS2sRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuNgwf9H2oxMKLKrlFoX1qHtNBwZuHS6IERhOkM
NI9DjS4MCyiUSbA5r3sWlpqXQeKIbG/05gUZ6Y0ircGFwnAGjZ6isPwo8pKFgbh5
QljXQjUTHbkshrXW8K+VGJxw4F1oiPlOGUDVdXPy2FLx5ZvBlaUV2rWQUzsWX9I0
EnrM6ygHBVejVYDe+JSkb1gzb/07xuZN410IJPuZTPKJfYiE0oGU3zpTbExFitaz
ObjfFUWqHrVue525WFAJ9Dbk8kYEKyMThr7rkkWekYJjujJLJo0qhEiZVZu0eEsk
Vq4PdKmQAqlgbShQ/3Mv8BRsSH2wy62+zKjPWL+8t4Gmm9DbLu+++A==
=T7Ii
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.19
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
Major changes:
new drivers
- wfx: silicon labs devices
- plfxlc: pureLiFi X, XL, XC devices
mac80211
- host based BSS color collision detection
- prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
- support TP-Link T2E devices
rtw89
- support firmware crash simulation
- preparation for 8852ce hardware support
ath11k
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support for QCA6390 and WCN6855
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- support for WCN6750
wcn36xx
- support for transmit rate reporting to user space
* tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits)
rtw89: 8852c: rfk: add DPK
rtw89: 8852c: rfk: add IQK
rtw89: 8852c: rfk: add RX DCK
rtw89: 8852c: rfk: add RCK
rtw89: 8852c: rfk: add TSSI
rtw89: 8852c: rfk: add LCK
rtw89: 8852c: rfk: add DACK
rtw89: 8852c: rfk: add RFK tables
plfxlc: fix le16_to_cpu warning for beacon_interval
rtw88: remove a copy of the NAPI_POLL_WEIGHT define
carl9170: tx: fix an incorrect use of list iterator
wil6210: use NAPI_POLL_WEIGHT for napi budget
ath10k: remove a copy of the NAPI_POLL_WEIGHT define
ath11k: Add support for WCN6750 device
ath11k: Datapath changes to support WCN6750
ath11k: HAL changes to support WCN6750
ath11k: Add QMI changes for WCN6750
ath11k: Fetch device information via QMI for WCN6750
ath11k: Add register access logic for WCN6750
ath11k: Add HW params for WCN6750
...
====================
Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Work around a hardware problem in the delta-ahe50dc-fan driver
- Explicitly disable PEC in PMBus core if not enabled
- Fix negative temperature values in f71882fg driver
- Fix warning on removal of adt7470 driver
- Fix CROSSHAIR VI HERO name in asus_wmi_sensors driver
- Fix build warning seen in xdpe12284 driver if
CONFIG_SENSORS_XDPE122_REGULATOR is disabled
- Fix type of 'ti,n-factor' in ti,tmp421 driver bindings
-----BEGIN PGP SIGNATURE-----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=NgTE
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Work around a hardware problem in the delta-ahe50dc-fan driver
- Explicitly disable PEC in PMBus core if not enabled
- Fix negative temperature values in f71882fg driver
- Fix warning on removal of adt7470 driver
- Fix CROSSHAIR VI HERO name in asus_wmi_sensors driver
- Fix build warning seen in xdpe12284 driver if
CONFIG_SENSORS_XDPE122_REGULATOR is disabled
- Fix type of 'ti,n-factor' in ti,tmp421 driver bindings
* tag 'hwmon-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus) delta-ahe50dc-fan: work around hardware quirk
hwmon: (pmbus) disable PEC if not enabled
hwmon: (f71882fg) Fix negative temperature
dt-bindings: hwmon: ti,tmp421: Fix type for 'ti,n-factor'
hwmon: (adt7470) Fix warning on module removal
hwmon: (asus_wmi_sensors) Fix CROSSHAIR VI HERO name
hwmon: (xdpe12284) Fix build warning seen if CONFIG_SENSORS_XDPE122_REGULATOR is disabled
ath.git patches for v5.19. Major changes:
ath11k
* support setting Specific Absorption Rate (SAR) for WCN6855
* read country code from SMBIOS for WCN6855/QCA6390
* support for WCN6750
WCN6750 is the WLAN chip on Qualcomm Snapdragon SoC SC7280;
Though being a PCIe based solution, it is not attached to
the APSS processor (Application Processor SubSystem), it is
instead attached to another tiny processor called WPSS Q6
processor (Wireless Processor SubSystem) on the SC7280 MSM,
where the WLAN firmware runs, and it is the WLAN firmware
running on the Q6 processor which enumerates WCN6750, as a
result APPS processor would never know such a device being
present in the system and would not detect the WCN6750
hardware unless and otherwise WCN6750 is registered as a
platform device. This is the reason behind adding WCN6750
WLAN node in the device tree.
Add WCN6750 wireless driver support, its based on ath11k driver.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220429170502.20080-2-quic_mpubbise@quicinc.com
* Take care of faults occuring between the PARange and
IPA range by injecting an exception
* Fix S2 faults taken from a host EL0 in protected mode
* Work around Oops caused by a PMU access from a 32bit
guest when PMU has been created. This is a temporary
bodge until we fix it for good.
x86:
* Fix potential races when walking host page table
* Fix shadow page table leak when KVM runs nested
* Work around bug in userspace when KVM synthesizes leaf
0x80000021 on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJuxI4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNjfQf/X4Rn6+sTkXRS0UHWEu+q9FjJ+mIx
ZUWdbncf0brUB1RPAFfKaiQHo0t2Req+iTlpqZL0nVQ4myNUelHYube/sZdK/aBR
WOjKZE0hugGyMH3js2bsTdgzbcphThyYAX97qGZNb7tsPGhBiw7c98KhjxlieJab
D8LMNtM3uzPDxg422GfOm8ge2VbpySS5oRoGHfbD+4FiLYlXoCYfZuzlFwFFIGxw
uHm5zzfX5jshayFpFYVSJHtARXlpwJWKz9yl63QjHrhVitW4m5j4re3aNfboL6Pd
F5Z9K+DKhJLAH5cqmgiPPe2CGMvmRwKrN3F9MqV91xDPBT8J4rrowEeboQ==
=SwSU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Take care of faults occuring between the PARange and IPA range by
injecting an exception
- Fix S2 faults taken from a host EL0 in protected mode
- Work around Oops caused by a PMU access from a 32bit guest when PMU
has been created. This is a temporary bodge until we fix it for
good.
x86:
- Fix potential races when walking host page table
- Fix shadow page table leak when KVM runs nested
- Work around bug in userspace when KVM synthesizes leaf 0x80000021
on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
- Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Revert "x86/mm: Introduce lookup_address_in_mm()"
KVM: x86/mmu: fix potential races when walking host page table
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
KVM: arm64: Inject exception on out-of-IPA-range translation fault
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
Add a tristate property to advertise desired transmit level.
If the device supports the 2.4 Vpp operating mode for 10BASE-T1L,
as defined in 802.3gc, and the 2.4 Vpp transmit voltage operation
is desired, property should be set to 1. This property is used
to select whether Auto-Negotiation advertises a request to
operate the 10BASE-T1L PHY in increased transmit level mode.
If property is set to 1, the PHY shall advertise a request
to operate the 10BASE-T1L PHY in increased transmit level mode.
If property is set to zero, the PHY shall not advertise
a request to operate the 10BASE-T1L PHY in increased transmit level mode.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are a number of small USB driver fixes for 5.18-rc5 for some
reported issues and new quirks. They include:
- dwc3 driver fixes
- xhci driver fixes
- typec driver fixes
- new usb-serial driver ids
- added new USB devices to existing quirk tables
- other tiny fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYm1WEQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn19ACgyugawY3leafZbEzC7A+/wl4dNOIAoM6eU6Dh
l1RU4tkJlJtCA9MZEJZw
=uzcD
-----END PGP SIGNATURE-----
Merge tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.18-rc5 for some
reported issues and new quirks. They include:
- dwc3 driver fixes
- xhci driver fixes
- typec driver fixes
- new usb-serial driver ids
- added new USB devices to existing quirk tables
- other tiny fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: phy: generic: Get the vbus supply
usb: dwc3: gadget: Return proper request status
usb: dwc3: pci: add support for the Intel Meteor Lake-P
usb: dwc3: core: Only handle soft-reset in DCTL
usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
usb: misc: eud: Fix an error handling path in eud_probe()
usb: core: Don't hold the device lock while sleeping in do_proc_control()
usb: dwc3: Try usb-role-switch first in dwc3_drd_init
usb: dwc3: core: Fix tx/rx threshold settings
usb: mtu3: fix USB 3.0 dual-role-switch from device to host
xhci: Enable runtime PM on second Alderlake controller
usb: dwc3: fix backwards compat with rockchip devices
dt-bindings: usb: samsung,exynos-usb2: add missing required reg
usb: misc: fix improper handling of refcount in uss720_probe()
USB: Fix ehci infinite suspend-resume loop issue in zhaoxin
usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant
usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY
usb: typec: ucsi: Fix role swapping
usb: typec: ucsi: Fix reuse of completion structure
usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions
...
The PHY reset was intended to be a phandle for a special PHY reset
driver for the integrated PHYs as well as any external PHYs. It turns
out, that the culprit is how the reset of the switch device is done.
In particular, the switch reset also affects other subsystems like
the GPIO and the SGPIO block and it happens to be the case that the
reset lines of the external PHYs are connected to a common GPIO line.
Thus as soon as the switch issues a reset during probe time, all the
external PHYs will go into reset because all the GPIO lines will
switch to input and the pull-down on that signal will take effect.
So even if there was a special PHY reset driver, it (1) won't fix
the root cause of the problem and (2) it won't fix all the other
consumers of GPIO lines which will also be reset.
It turns out, the Ocelot SoC has the same weird behavior (or the
lack of a dedicated switch reset) and there the problem is already
solved and all the bits and pieces are already there and this PHY
reset property isn't not needed at all.
There are no users of this binding. Just remove it.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new net.mptcp.pm_type sysctl determines which path manager will be
used by each newly-created MPTCP socket.
v2: Handle builds without CONFIG_SYSCTL
v3: Clarify logic for type-specific PM init (Geliang Tang and Paolo Abeni)
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The LAN8814 has a coma mode pin which is used to put the PHY into
isolate and power-down mode. Usually strapped to be asserted by default.
A GPIO is then used to take the PHY out of this mode.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- A fix for a regression caused by the previous set of bugfixes
changing tegra and at91 pinctrl properties. More work is needed
to figure out what this should actually be, but a revert makes
it work for the moment.
- Defconfig regression fixes for tegra after renamed symbols
- Build-time warning and static checker fixes for imx, op-tee,
sunxi, meson, at91, and omap
- More at91 DT fixes for audio, regulator and spi nodes
- A regression fix for Renesas Hyperflash memory probe
- A stability fix for amlogic boards, modifying the allowed
cpufreq states
- Multiple fixes for system suspend on omap2+
- DT fixes for various i.MX bugs
- A probe error fix for imx6ull-colibri MMC
- A MAINTAINERS file entry for samsung bug reports
-----BEGIN PGP SIGNATURE-----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=GXTu
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
- A fix for a regression caused by the previous set of bugfixes
changing tegra and at91 pinctrl properties.
More work is needed to figure out what this should actually be, but a
revert makes it work for the moment.
- Defconfig regression fixes for tegra after renamed symbols
- Build-time warning and static checker fixes for imx, op-tee, sunxi,
meson, at91, and omap
- More at91 DT fixes for audio, regulator and spi nodes
- A regression fix for Renesas Hyperflash memory probe
- A stability fix for amlogic boards, modifying the allowed cpufreq
states
- Multiple fixes for system suspend on omap2+
- DT fixes for various i.MX bugs
- A probe error fix for imx6ull-colibri MMC
- A MAINTAINERS file entry for samsung bug reports
* tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
Revert "arm: dts: at91: Fix boolean properties with values"
bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
Revert "arm64: dts: tegra: Fix boolean properties with values"
arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
ARM: dts: imx6ull-colibri: fix vqmmc regulator
MAINTAINERS: add Bug entry for Samsung and memory controller drivers
memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
ARM: dts: am3517-evm: Fix misc pinmuxing
ARM: dts: am33xx-l4: Add missing touchscreen clock properties
ARM: dts: Fix mmc order for omap3-gta04
ARM: dts: at91: fix pinctrl phandles
ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name
ARM: dts: at91: Describe regulators on at91sam9g20ek
ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
ARM: dts: at91: Fix boolean properties with values
ARM: dts: at91: use generic node name for dataflash
ARM: dts: at91: align SPI NOR node name with dtschema
ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines
ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines
...
