IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If skb_linearize fails, the driver should drop the packet
instead of trying to copy it into the bounce buffer.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some devices will silently fail setup unless they are reset first.
This is necessary even if the data interface is already in
altsetting 0, which it will be when the device is probed for the
first time. Briefly toggling the altsetting forces a function
reset regardless of the initial state.
This fixes a setup problem observed on a number of Huawei devices,
appearing to operate in NTB-32 mode even if we explicitly set them
to NTB-16 mode.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct a typo introduced by
d0cdf90031 ("EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support")
As a result under some configurations DIMMs were not correctly
recognized. Problem affects only Xeon Phi architecture.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1457361045-26221-1-git-send-email-hubert.chrzaniuk@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The recent commit [0bdf5a0564: drm/i915: Add reverse mapping between
port and intel_encoder] introduced a reverse mapping to retrieve
intel_dig_port object from the port number. The code assumed that the
port vs intel_dig_port are 1:1 mapping. But in reality, this was a
too naive assumption.
As Martin reported about the missing HDMI audio on his SNB machine,
pre-HSW chips may have multiple intel_dig_port objects corresponding
to the same port. Since we assign the mapping statically at the init
time and the multiple objects override the map, it may not match with
the actually enabled output.
This patch tries to address the regression above. The reverse mapping
is provided basically only for the audio callbacks, so now we set /
clear the mapping dynamically at enabling and disabling HDMI/DP audio,
so that we can always track the latest and correct object
corresponding to the given port.
Fixes: 0bdf5a0564 ('drm/i915: Add reverse mapping between port and intel_encoder')
Reported-and-tested-by: Martin Kepplinger <martink@posteo.de>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456324522-21591-1-git-send-email-tiwai@suse.de
(cherry picked from commit 9dfbffcf4a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In case bind() works, but a later error forces bailing
in probe() in error cases work and a timer may be scheduled.
They must be killed. This fixes an error case related to
the double free reported in
http://www.spinics.net/lists/netdev/msg367669.html
and needs to go on top of Linus' fix to cdc-ncm.
Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
mlxsw: couple of fixes
Couple of fixes from Ido.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The descriptor queues for sending (SDQs) and receiving (RDQs) packets
are managed by two counters - producer and consumer - which are both
16-bit in size. A queue is considered full when the difference between
the two equals the queue's maximum number of descriptors.
However, if the producer counter overflows, then it's possible for the
full queue check to fail, as it doesn't take the overflow into account.
In such a case, descriptors already passed to the device - but for which
a completion has yet to be posted - will be overwritten, thereby causing
undefined behavior. The above can be achieved under heavy load (~30
netperf instances).
Fix that by casting the subtraction result to u16, preventing it from
being treated as a signed integer.
Fixes: eda6500a98 ("mlxsw: Add PCI bus implementation")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we only support one VLAN filtering bridge we need to associate a
reference count with it, so that when the last port netdev leaves it, we
would know that a different bridge can be offloaded to hardware.
When a LAG device is memeber in a bridge and port netdevs are leaving
the LAG, we should always decrement the bridge's reference count, as it's
incremented for any port in the LAG.
Fixes: 4dc236c317 ("mlxsw: spectrum: Handle port leaving LAG while bridged")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places. They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.
The other changes are:
- A fix for Qualcomm devices to work on big endian systems. The
original change is actually correct but triggered a bug in regmap
which is too invasive to fix for this cycle and can be worked around
by just letting regmap pick the default.
- A fix for the Samsung I2S driver locking which wasn't using IRQ safe
spinlocks when it needed to.
- A fix for the new Intel Sky Lake driver forgetting that C pointer
arithmetic takes the type of the pointer into consideration.
- A revert of a change to the FSL SSI driver that broke some systems.
- A fix for the cleanup path of the wm9713 driver.
- A fix for some incorrect register definitions in the ADAU17x1 driver
that caused misclocking in some configurations.
- A fix for the tracepoints for jack detection to avoid using an
internal field of the core jack structure which is no longer present
in all configurations.
- A fix for another of the new Intel drivers which tried to write to a
string literal.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW3OpsAAoJECTWi3JdVIfQ/lMH/05/atIZLFI3tfxpp9P1zCD2
6BH6aUtGEz8uh7wpfLlgUKvBhFZxZmr2aYHiuD2c2UQYWJ5L14GavkUvrohQ1oBp
6LGN2pJ/0uhQ6XnFHcYnJt5C3pdQspNxaNZBCTdLQZDjjki13Q8jXVL2vToFFbpK
vFEHLqeuwtSLgtgNJMHHLR6o5QpfX7lcMGKwsfNI8k5b+2j5UDh+fwGQcnU9wueU
FyxIy9FNlHd1nWwQDNyGL06pMKazsPV6KaPDXa/rG6RsOBxpjz+5JgCVKmAh7EUp
/qUS2Xy0DVTkedtunnA9EIIHyfC1zuFjeH6lU2UyP/A2kcMlzpNyt7uMRK0dolg=
=+Y7p
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.5
This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places. They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.
The other changes are:
- A fix for Qualcomm devices to work on big endian systems. The
original change is actually correct but triggered a bug in regmap
which is too invasive to fix for this cycle and can be worked around
by just letting regmap pick the default.
- A fix for the Samsung I2S driver locking which wasn't using IRQ safe
spinlocks when it needed to.
- A fix for the new Intel Sky Lake driver forgetting that C pointer
arithmetic takes the type of the pointer into consideration.
- A revert of a change to the FSL SSI driver that broke some systems.
- A fix for the cleanup path of the wm9713 driver.
- A fix for some incorrect register definitions in the ADAU17x1 driver
that caused misclocking in some configurations.
- A fix for the tracepoints for jack detection to avoid using an
internal field of the core jack structure which is no longer present
in all configurations.
- A fix for another of the new Intel drivers which tried to write to a
string literal.
Errata id: i877
Description:
------------
The RGMII 1000 Mbps Transmit timing is based on the output clock
(rgmiin_txc) being driven relative to the rising edge of an internal
clock and the output control/data (rgmiin_txctl/txd) being driven relative
to the falling edge of an internal clock source. If the internal clock
source is allowed to be static low (i.e., disabled) for an extended period
of time then when the clock is actually enabled the timing delta between
the rising edge and falling edge can change over the lifetime of the
device. This can result in the device switching characteristics degrading
over time, and eventually failing to meet the Data Manual Delay Time/Skew
specs.
To maintain RGMII 1000 Mbps IO Timings, SW should minimize the
duration that the Ethernet internal clock source is disabled. Note that
the device reset state for the Ethernet clock is "disabled".
Other RGMII modes (10 Mbps, 100Mbps) are not affected
Workaround:
-----------
If the SoC Ethernet interface(s) are used in RGMII mode at 1000 Mbps,
SW should minimize the time the Ethernet internal clock source is disabled
to a maximum of 200 hours in a device life cycle. This is done by enabling
the clock as early as possible in IPL (QNX) or SPL/u-boot (Linux/Android)
by setting the register CM_GMAC_CLKSTCTRL[1:0]CLKTRCTRL = 0x2:SW_WKUP.
So, do not allow to gate the cpsw clocks using ti,no-idle property in
cpsw node assuming 1000 Mbps is being used all the time. If someone does
not need 1000 Mbps and wants to gate clocks to cpsw, this property needs
to be deleted in their respective board files.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Introduce a dt property, ti,no-idle, that prevents an IP to idle at any
point. This is to handle Errata i877, which tells that GMAC clocks
cannot be disabled.
Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
commit 4d5cfcba2f ('tipc: fix connection abort during subscription
cancel'), removes the check for a valid subscription before calling
tipc_nametbl_subscribe().
This will lead to a nullptr exception when we process a
subscription cancel request. For a cancel request, a null
subscription is passed to tipc_nametbl_subscribe() resulting
in exception.
In this commit, we call tipc_nametbl_subscribe() only for
a valid subscription.
Fixes: 4d5cfcba2f ('tipc: fix connection abort during subscription cancel')
Reported-by: Anders Widell <anders.widell@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.
Issue detected using static analysis with CoverityScan
Fixes: e7f4dc3536 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.
Issue detected using static analysis with CoverityScan
Fixes: e7f4dc3536 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before calling the destroy() or target() callbacks, the family parameter
field has to be initialized. Otherwise at least the LOG target will
refuse to work and upon removal oops the kernel.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Used to be allocated and required freeing, but now
priv->mdio->irq is now a fixed sized array and should no longer be
free'd.
Issue detected using static analysis with CoverityScan
Fixes: e7f4dc3536 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable workaround for MPC8548E erratum eTSEC 106,
"Excess delays when transmitting TOE=1 large frames".
(see commit 53fad77375 "gianfar: Enable eTSEC-20 erratum w/a
for P2020 Rev1")
This erratum was fixed in Rev 3.1.x.
Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp>
Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tiny fixes branch this week, in fact only one patch.
Turns out the USB support for a Renesas board was developed on a pre-release
board that ended up being changed before shipping. To avoid breakage on those
boards, and avoid confusion, it's a reasonable idea to patch now instead of
later. There are no known users of the pre-release variant any more.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aA8l
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fix from Olof Johansson:
"Tiny fixes branch this week, in fact only one patch.
Turns out the USB support for a Renesas board was developed on a
pre-release board that ended up being changed before shipping. To
avoid breakage on those boards, and avoid confusion, it's a reasonable
idea to patch now instead of later. There are no known users of the
pre-release variant any more"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: porter: remove enable prop from HS-USB device node
Pull ARM fixes from Russell King:
"Just two ARM fixes this time: one to fix the hyp-stub for older ARM
CPUs, and another to fix the set_memory_xx() permission functions to
deal with zero sizes correctly"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8544/1: set_memory_xx fixes
ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
XFS uses CRC verification over a sub-range of the head of the log to
detect and handle torn writes. This torn log write detection currently
runs unconditionally at mount time, regardless of whether the log is
dirty or clean. This is problematic in cases where a filesystem might
end up being moved across different, incompatible (i.e., opposite
byte-endianness) architectures.
The problem lies in the fact that log data is not necessarily written in
an architecture independent format. For example, certain bits of data
are written in native endian format. Further, the size of certain log
data structures differs (i.e., struct xlog_rec_header) depending on the
word size of the cpu. This leads to false positive crc verification
errors and ultimately failed mounts when a cleanly unmounted filesystem
is mounted on a system with an incompatible architecture from data that
was written near the head of the log.
Update the log head/tail discovery code to run torn write detection only
when the log is not clean. This means something other than an unmount
record resides at the head of the log and log recovery is imminent. It
is a requirement to run log recovery on the same type of host that had
written the content of the dirty log and therefore CRC failures are
legitimate corruptions in that scenario.
Reported-by: Jan Beulich <JBeulich@suse.com>
Tested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Once the record at the head of the log is identified and verified, the
in-core log state is updated based on the record. This includes
information such as the current head block and cycle, the start block of
the last record written to the log, the tail lsn, etc.
Once torn write detection is conditional, this logic will need to be
reused. Factor the code to update the in-core log data structures into a
new helper function. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Once the mount sequence has identified the head and tail blocks of the
physical log, the record at the head of the log is located and examined
for an unmount record to determine if the log is clean. This currently
occurs after torn write verification of the head region of the log.
This must ultimately be separated from torn write verification and may
need to be called again if the log head is walked back due to a torn
write (to determine whether the new head record is an unmount record).
Separate this logic into a new helper function. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The code that locates the log record at the head of the log is buried in
the log head verification function. This is fine when torn write
verification occurs unconditionally, but this behavior is problematic
for filesystems that might be moved across systems with different
architectures.
In preparation for separating examination of the log head for unmount
records from torn write detection, lift the record location logic out of
the log verification function and into the caller. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull ceph fix from Sage Weil:
"This is a final commit we missed to align the protocol compatibility
with the feature bits.
It decodes a few extra fields in two different messages and reports
EIO when they are used (not yet supported)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=E4vJ
-----END PGP SIGNATURE-----
Merge tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifs
Pull UBI fix from Richard Weinberger:
"This contains a single bug fix for UBI"
* tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifs:
ubi: Fix out of bounds write in volume update code
Pull UML fixes from Richard Weinberger:
"This contains three bug/build fixes"
* 'for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: use %lx format specifiers for unsigned longs
um: Export pm_power_off
Revert "um: Fix get_signal() usage"
Pull MIPS fixes from Ralf Baechle:
"Another round of fixes for 4.5:
- Fix the use of an undocumented syntactial variant of the .type
pseudo op which is not supported by the LLVM assembler.
- Fix invalid initialization on S-cache-less systems.
- Fix possible information leak from the kernel stack for SIGFPE.
- Fix handling of copy_{from,to}_user() return value in KVM
- Fix the last instance of irq_to_gpio() which now was causing build
errors"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'
MIPS: kvm: Fix ioctl error handling.
MIPS: scache: Fix scache init with invalid line size.
MIPS: Avoid variant of .type unsupported by LLVM Assembler
MIPS: jz4740: Fix surviving instance of irq_to_gpio()
Pull i2c fix from Wolfram Sang:
"One I2C bugfix ensuring correct memory allocation in a driver"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: brcmstb: allocate correct amount of memory for regmap
Here are some USB driver ids for 4.5-rc7, and the removal of a driver we
merged in 4.5-rc1 but it turns out it's not needed as the hardware is the
same as a driver we already have in the tree. This was only figured out
after doing a lot of cleanup on it, gotta love vendor-provided drivers...
The new device ids for the devices for this driver will be added later on
when testing is completed, but for now, we will remove the driver to keep
people from accidentally cleaning it up.
All of these have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbbRQwACgkQMUfUDdst+ymafACfUdM+kY6JrFmiZMB4eu4t78o9
EtQAoLE3Z7EWw+qZ71LFCkEu06hx8PSH
=HwpY
-----END PGP SIGNATURE-----
Merge tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver ids for 4.5-rc7, and the removal of a driver
we merged in 4.5-rc1 but it turns out it's not needed as the hardware
is the same as a driver we already have in the tree.
This was only figured out after doing a lot of cleanup on it, gotta
love vendor-provided drivers... The new device ids for the devices
for this driver will be added later on when testing is completed, but
for now, we will remove the driver to keep people from accidentally
cleaning it up.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: qcserial: add Sierra Wireless EM74xx device ID
Revert "USB: serial: add Moxa UPORT 11x0 driver"
USB: serial: option: add support for Quectel UC20
USB: serial: option: add support for Telit LE922 PID 0x1045
USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder
USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)
usb: chipidea: otg: change workqueue ci_otg as freezable
This patch fixes a recent ABORT_TASK regression associated
with commit febe562c, where a left-over target_put_sess_cmd()
would still be called when __target_check_io_state() detected
a command has already been completed, and explicit ABORT must
be avoided.
Note commit febe562c dropped the local kref_get_unless_zero()
check in core_tmr_abort_task(), but did not drop this extra
corresponding target_put_sess_cmd() in the failure path.
So go ahead and drop this now bogus target_put_sess_cmd(),
and avoid this potential use-after-free.
Reported-by: Dan Lane <dracodan@gmail.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
static analysis from cppcheck detected %x being used for
unsigned longs:
[arch/x86/um/os-Linux/task_size.c:112]: (warning) %x in format
string (no. 1) requires 'unsigned int' but the argument type
is 'unsigned long'.
Use %lx instead of %x
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Commit db2f24dc24
was plain wrong. I did not realize the we are
allowed to loop here.
In fact we have to loop and must not return to userspace
before all SIGSEGVs have been delivered.
Other archs do this directly in their entry code, UML
does it here.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
ubi_start_leb_change() allocates too few bytes.
ubi_more_leb_change_data() will write up to req->upd_bytes +
ubi->min_io_size bytes.
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
It's our tradition to get a high volume of fixes late at rc7: this
time, X32 ABI breakage was found and this resulted in a high number
LOCs. The necessary changes to ALSA core codes were fairly
straightforward, and more importantly, they are specific to X32, thus
should be safe to apply.
Other than that, rather a collection of small fixes:
- Removal of the code that blocks too long at closing the OSS
sequencer client (which was spotted by syzkaller, unsurprisingly)
- Fixes races at HD-audio HDMI i915 audio binding
- a few HDSP/HDPM zero-division fixes
- Quirks for HD-audio and USB-audio as usual
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=6vCP
-----END PGP SIGNATURE-----
Merge tag 'sound-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It's our tradition to get a high volume of fixes late at rc7: this
time, X32 ABI breakage was found and this resulted in a high number
LOCs. The necessary changes to ALSA core codes were fairly
straightforward, and more importantly, they are specific to X32, thus
should be safe to apply.
Other than that, rather a collection of small fixes:
- Removal of the code that blocks too long at closing the OSS
sequencer client (which was spotted by syzkaller, unsurprisingly)
- Fixes races at HD-audio HDMI i915 audio binding
- a few HDSP/HDPM zero-division fixes
- Quirks for HD-audio and USB-audio as usual"
* tag 'sound-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - hdmi defer to register acomp eld notifier
ALSA: hda - hdmi add wmb barrier for audio component
ALSA: hda - Fix mic issues on Acer Aspire E1-472
ALSA: seq: oss: Don't drain at closing a client
ALSA: usb-audio: Add a quirk for Plantronics DA45
ALSA: hdsp: Fix wrong boolean ctl value accesses
ALSA: hdspm: Fix zero-division
ALSA: hdspm: Fix wrong boolean ctl value accesses
ALSA: timer: Fix ioctls for X32 ABI
ALSA: timer: Fix broken compat timer user status ioctl
ALSA: rawmidi: Fix ioctls X32 ABI
ALSA: rawmidi: Use comapt_put_timespec()
ALSA: pcm: Fix ioctls for X32 ABI
ALSA: ctl: Fix ioctls for X32 ABI
One minor fix on pxa driver to fix the cyclic dma tranfers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2qcB
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.5-rc7' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fix from Vinod Koul:
"One minor fix on pxa driver to fix the cyclic dma tranfers"
* tag 'dmaengine-fix-4.5-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: pxa_dma: fix cyclic transfers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lhV9
-----END PGP SIGNATURE-----
Merge tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some last time changes before we stablize the new entity function
integer numbers at uAPI
- probe: fix erroneous return value on i2c/adp1653 driver
- fix tx 5v detect regression on adv7604 driver
- fix missing unlock on error in vpfe_prepare_pipeline() on
davinci_vpfe driver
* tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] media: Sanitise the reserved fields of the G_TOPOLOGY IOCTL arguments
[media] media.h: postpone connectors entities
[media] media.h: use hex values for range offsets, move connectors base up.
[media] adv7604: fix tx 5v detect regression
[media] media.h: get rid of MEDIA_ENT_F_CONN_TEST
[media] [for,v4.5] media.h: increase the spacing between function ranges
[media] media: i2c/adp1653: probe: fix erroneous return value
[media] media: davinci_vpfe: fix missing unlock on error in vpfe_prepare_pipeline()
This is a port of the patch "drm/amdgpu: Fix error handling in amdgpu_flip_work_func."
to fix the following problem for radeon as well which was
reported against amdgpu:
The patch e1d09dc0cc: "drm/amdgpu: Don't hang in
amdgpu_flip_work_func on disabled crtc." from Feb 19, 2016, leads to
the following static checker warning, as reported by Dan Carpenter in
https://lists.freedesktop.org/archives/dri-devel/2016-February/101987.html
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:127 amdgpu_flip_work_func() warn: should this be 'repcnt == -1'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'spin_lock:&crtc->dev->event_lock'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'irqsave:flags'
This patch fixes both reported problems:
Change post-decrement of repcnt to pre-decrement, so
it can't underflow anymore, but still performs up to
three repetitions - three is the maximum one could
expect in practice.
Move the spin_unlock_irqrestore to where it actually
belongs.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> # 4.4+
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch e1d09dc0cc: "drm/amdgpu: Don't hang in
amdgpu_flip_work_func on disabled crtc." from Feb 19, 2016, leads to
the following static checker warning, as reported by Dan Carpenter in
https://lists.freedesktop.org/archives/dri-devel/2016-February/101987.html
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:127 amdgpu_flip_work_func() warn: should this be 'repcnt == -1'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'spin_lock:&crtc->dev->event_lock'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'irqsave:flags'
This patch fixes both reported problems:
Change post-decrement of repcnt to pre-decrement, so
it can't underflow anymore, but still performs up to
three repetitions - three is the maximum one could
expect in practice.
Move the spin_unlock_irqrestore to where it actually
belongs.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> # 4.4+
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull libnvcimm fix from Dan Williams:
"One straggling fix for NVDIMM support.
The KVM/QEMU enabling for NVDIMMs has recently reached the point where
it is able to accept some ACPI _DSM requests from a guest VM. However
they immediately found that the 4.5-rc kernel is unusable because the
kernel's 'nfit' driver fails to load upon seeing a valid "not
supported" response from the virtual BIOS for an address range scrub
command.
It is not mandatory that a platform implement address range scrubbing,
so this fix from Vishal properly treats the 'not supported' response
as 'skip scrubbing and continue loading the driver'"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: Continue init even if ARS commands are unimplemented
Two fairly simple fixes. One is a regression with ipr firmware
loading caused by one of the trivial patches in the last merge window
which failed to strip the \n from the file name string, so now the
firmware loader no longer works leading to a lot of unhappy ipr users;
fix by stripping the \n. The second is a memory leak within SCSI: the
BLK_PREP_INVALID state was introduced a recent fix but we forgot to
account for it correctly when freeing state, resulting in memory
leakage. Add the correct state freeing in scsi_prep_return().
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJW2hlQAAoJEDeqqVYsXL0McMQIALFgkpEzXrk4Jmrls1bNH4pM
6+lMCRFHt97g5PXWg+C4icmH3cHi70Nu3qllbkDcvMUzBdlTN5lQIXIsunOHNf1B
Tt9ZxwknCJMRFHr2PVdjILrF+fpsEoHBgFykpy8mvgS4A0Cj1I9qALYSID42hyIL
Y8JP9Hq7oHG8Dsndttpa7nkq4HoD1X7q2YcX5fJ+I+h06bs7bL+lEszS6UjRIbgX
+WFgDAbczpz4HgB/ZWSlgEw5Dn06boRAZQaIoYkXTtUlLgqx825WOPhyaTWMKrXe
QuE7sPgf5wRvuq+gSnzRX/ieKMgB0zr3kpO6ZPMwXMVccBfDF+ZHj9w/wl5ULpk=
=gJYE
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fairly simple fixes.
One is a regression with ipr firmware loading caused by one of the
trivial patches in the last merge window which failed to strip the \n
from the file name string, so now the firmware loader no longer works
leading to a lot of unhappy ipr users; fix by stripping the \n.
The second is a memory leak within SCSI: the BLK_PREP_INVALID state
was introduced a recent fix but we forgot to account for it correctly
when freeing state, resulting in memory leakage. Add the correct
state freeing in scsi_prep_return()"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ipr: Fix regression when loading firmware
SCSI: Free resources when we return BLKPREP_INVALID
