IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It was reported that 'perf stat' crashed when using with armv8_pmu (CPU)
events with the task mode. As 'perf stat' uses an empty cpu map for
task mode but armv8_pmu has its own cpu mask, it has confused which map
it should use when accessing file descriptors and this causes segfaults:
(gdb) bt
#0 0x0000000000603fc8 in perf_evsel__close_fd_cpu (evsel=<optimized out>,
cpu=<optimized out>) at evsel.c:122
#1 perf_evsel__close_cpu (evsel=evsel@entry=0x716e950, cpu=7) at evsel.c:156
#2 0x00000000004d4718 in evlist__close (evlist=0x70a7cb0) at util/evlist.c:1242
#3 0x0000000000453404 in __run_perf_stat (argc=3, argc@entry=1, argv=0x30,
argv@entry=0xfffffaea2f90, run_idx=119, run_idx@entry=1701998435)
at builtin-stat.c:929
#4 0x0000000000455058 in run_perf_stat (run_idx=1701998435, argv=0xfffffaea2f90,
argc=1) at builtin-stat.c:947
#5 cmd_stat (argc=1, argv=0xfffffaea2f90) at builtin-stat.c:2357
#6 0x00000000004bb888 in run_builtin (p=p@entry=0x9764b8 <commands+288>,
argc=argc@entry=4, argv=argv@entry=0xfffffaea2f90) at perf.c:312
#7 0x00000000004bbb54 in handle_internal_command (argc=argc@entry=4,
argv=argv@entry=0xfffffaea2f90) at perf.c:364
#8 0x0000000000435378 in run_argv (argcp=<synthetic pointer>,
argv=<synthetic pointer>) at perf.c:408
#9 main (argc=4, argv=0xfffffaea2f90) at perf.c:538
To fix this, I simply used the given cpu map unless the evsel actually
is not a system-wide event (like uncore events).
Fixes: 7736627b865d ("perf stat: Use affinity for closing file descriptors")
Reported-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201007081311.1831003-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_program__set_attach_target(prog, fd, ...) will always fail when
fd = 0 (attach to a kernel symbol) because obj->btf_vmlinux is NULL
and there is no way to set it (at the moment btf_vmlinux is meant
to be temporary storage for use in bpf_object__load_xattr()).
Fix this by using libbpf_find_vmlinux_btf_id().
At some point we may want to opportunistically cache btf_vmlinux
so it can be reused with multiple programs.
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Petar Penkov <ppenkov@google.com>
Link: https://lore.kernel.org/bpf/20201005224528.389097-1-lrizzo@google.com
Say a user reuse map fd after creating a map manually and set the
pin_path, then load the object via libbpf.
In libbpf bpf_object__create_maps(), bpf_object__reuse_map() will
return 0 if there is no pinned map in map->pin_path. Then after
checking if map fd exist, we should also check if pin_path was set
and do bpf_map__pin() instead of continue the loop.
Fix it by creating map if fd not exist and continue checking pin_path
after that.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201006021345.3817033-3-liuhangbin@gmail.com
Previously we forgot to close the map fd if bpf_map_update_elem()
failed during map slot init, which will leak map fd.
Let's move map slot initialization to new function init_map_slots() to
simplify the code. And close the map fd if init slot failed.
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201006021345.3817033-2-liuhangbin@gmail.com
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
If a ksym is defined with a type, libbpf will try to find the ksym's btf
information from kernel btf. If a valid btf entry for the ksym is found,
libbpf can pass in the found btf id to the verifier, which validates the
ksym's type and value.
Typeless ksyms (i.e. those defined as 'void') will not have such btf_id,
but it has the symbol's address (read from kallsyms) and its value is
treated as a raw pointer.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200929235049.2533242-3-haoluo@google.com
Ensure that btf_dump can accommodate new BTF types being appended to BTF
instance after struct btf_dump was created. This came up during attemp to
use btf_dump for raw type dumping in selftests, but given changes are not
excessive, it's good to not have any gotchas in API usage, so I decided to
support such use case in general.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200929232843.1249318-2-andriin@fb.com
Port of tail_call_static() helper function from Cilium's BPF code base [0]
to libbpf, so others can easily consume it as well. We've been using this
in production code for some time now. The main idea is that we guarantee
that the kernel's BPF infrastructure and JIT (here: x86_64) can patch the
JITed BPF insns with direct jumps instead of having to fall back to using
expensive retpolines. By using inline asm, we guarantee that the compiler
won't merge the call from different paths with potentially different
content of r2/r3.
We're also using Cilium's __throw_build_bug() macro (here as: __bpf_unreachable())
in different places as a neat trick to trigger compilation errors when
compiler does not remove code at compilation time. This works for the BPF
back end as it does not implement the __builtin_trap().
[0] f5537c2602
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1656a082e077552eb46642d513b4a6bde9a7dd01.1601477936.git.daniel@iogearbox.net
Libbpf compiles .o's for static and shared library modes separately, so no
need to specify -fPIC for both. Keep it only for shared library mode.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200929220604.833631-3-andriin@fb.com
For some reason compiler doesn't complain about uninitialized variable, fixed
in previous patch, if libbpf is compiled without -O2 optimization level. So do
compile it with -O2 and never let similar issue slip by again. -Wall is added
unconditionally, so no need to specify it again.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200929220604.833631-2-andriin@fb.com
Fix obvious unitialized variable use that wasn't reported by compiler. libbpf
Makefile changes to catch such errors are added separately.
Fixes: 3289959b97ca ("libbpf: Support BTF loading and raw data output in both endianness")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200929220604.833631-1-andriin@fb.com
This adds support for supplying a target btf ID for the bpf_link_create()
operation, and adds a new bpf_program__attach_freplace() high-level API for
attaching freplace functions with a target.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/160138355387.48470.18026176785351166890.stgit@toke.dk
Teach BTF to recognized wrong endianness and transparently convert it
internally to host endianness. Original endianness of BTF will be preserved
and used during btf__get_raw_data() to convert resulting raw data to the same
endianness and a source raw_data. This means that little-endian host can parse
big-endian BTF with no issues, all the type data will be presented to the
client application in native endianness, but when it's time for emitting BTF
to persist it in a file (e.g., after BTF deduplication), original non-native
endianness will be preserved and stored.
It's possible to query original endianness of BTF data with new
btf__endianness() API. It's also possible to override desired output
endianness with btf__set_endianness(), so that if application needs to load,
say, big-endian BTF and store it as little-endian BTF, it's possible to
manually override this. If btf__set_endianness() was used to change
endianness, btf__endianness() will reflect overridden endianness.
Given there are no known use cases for supporting cross-endianness for
.BTF.ext, loading .BTF.ext in non-native endianness is not supported.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200929043046.1324350-3-andriin@fb.com
BTF strings are used not just for names, they can be arbitrary strings used
for CO-RE relocations, line/func infos, etc. Thus "name_by_offset" terminology
is too specific and might be misleading. Instead, introduce
btf__str_by_offset() API which uses generic string terminology.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200929020533.711288-3-andriin@fb.com
Add APIs for appending new BTF types at the end of BTF object.
Each BTF kind has either one API of the form btf__add_<kind>(). For types
that have variable amount of additional items (struct/union, enum, func_proto,
datasec), additional API is provided to emit each such item. E.g., for
emitting a struct, one would use the following sequence of API calls:
btf__add_struct(...);
btf__add_field(...);
...
btf__add_field(...);
Each btf__add_field() will ensure that the last BTF type is of STRUCT or
UNION kind and will automatically increment that type's vlen field.
All the strings are provided as C strings (const char *), not a string offset.
This significantly improves usability of BTF writer APIs. All such strings
will be automatically appended to string section or existing string will be
re-used, if such string was already added previously.
Each API attempts to do all the reasonable validations, like enforcing
non-empty names for entities with required names, proper value bounds, various
bit offset restrictions, etc.
Type ID validation is minimal because it's possible to emit a type that refers
to type that will be emitted later, so libbpf has no way to enforce such
cases. User must be careful to properly emit all the necessary types and
specify type IDs that will be valid in the finally generated BTF.
Each of btf__add_<kind>() APIs return new type ID on success or negative
value on error. APIs like btf__add_field() that emit additional items
return zero on success and negative value on error.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200929020533.711288-2-andriin@fb.com
Add an ability to create an empty BTF object from scratch. This is going to be
used by pahole for BTF encoding. And also by selftest for convenient creation
of BTF objects.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-7-andriin@fb.com
Allow internal BTF representation to switch from default read-only mode, in
which raw BTF data is a single non-modifiable block of memory with BTF header,
types, and strings layed out sequentially and contiguously in memory, into
a writable representation with types and strings data split out into separate
memory regions, that can be dynamically expanded.
Such writable internal representation is transparent to users of libbpf APIs,
but allows to append new types and strings at the end of BTF, which is
a typical use case when generating BTF programmatically. All the basic
guarantees of BTF types and strings layout is preserved, i.e., user can get
`struct btf_type *` pointer and read it directly. Such btf_type pointers might
be invalidated if BTF is modified, so some care is required in such mixed
read/write scenarios.
Switch from read-only to writable configuration happens automatically the
first time when user attempts to modify BTF by either adding a new type or new
string. It is still possible to get raw BTF data, which is a single piece of
memory that can be persisted in ELF section or into a file as raw BTF. Such
raw data memory is also still owned by BTF and will be freed either when BTF
object is freed or if another modification to BTF happens, as any modification
invalidates BTF raw representation.
This patch adds the first two BTF manipulation APIs: btf__add_str(), which
allows to add arbitrary strings to BTF string section, and btf__find_str()
which allows to find existing string offset, but not add it if it's missing.
All the added strings are automatically deduplicated. This is achieved by
maintaining an additional string lookup index for all unique strings. Such
index is built when BTF is switched to modifiable mode. If at that time BTF
strings section contained duplicate strings, they are not de-duplicated. This
is done specifically to not modify the existing content of BTF (types, their
string offsets, etc), which can cause confusion and is especially important
property if there is struct btf_ext associated with struct btf. By following
this "imperfect deduplication" process, btf_ext is kept consitent and correct.
If deduplication of strings is necessary, it can be forced by doing BTF
deduplication, at which point all the strings will be eagerly deduplicated and
all string offsets both in struct btf and struct btf_ext will be updated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-6-andriin@fb.com
Calculating a hash of zero-terminated string is a common need when using
hashmap, so extract it for reuse.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-5-andriin@fb.com
Managing dynamically-sized array is a common, but not trivial functionality,
which significant amount of logic and code to implement properly. So instead
of re-implementing it all the time, extract it into a helper function ans
reuse.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-4-andriin@fb.com
Refactor internals of struct btf to remove assumptions that BTF header, type
data, and string data are layed out contiguously in a memory in a single
memory allocation. Now we have three separate pointers pointing to the start
of each respective are: header, types, strings. In the next patches, these
pointers will be re-assigned to point to independently allocated memory areas,
if BTF needs to be modified.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-3-andriin@fb.com
Refactor implementation of internal BTF type index to not use direct pointers.
Instead it uses offset relative to the start of types data section. This
allows for types data to be reallocatable, enabling implementation of
modifiable BTF.
As now getting type by ID has an extra indirection step, convert all internal
type lookups to a new helper btf_type_id(), that returns non-const pointer to
a type by its ID.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-2-andriin@fb.com
Add bpf_prog_test_run_opts() with support of new fields in bpf_attr.test,
namely, flags and cpu. Also extend _opts operations to support outputs via
opts.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200925205432.1777-3-songliubraving@fb.com
Fix regression in libbpf, introduced by XDP link change, which causes XDP
programs to fail to be loaded into kernel due to specified BPF_XDP
expected_attach_type. While kernel doesn't enforce expected_attach_type for
BPF_PROG_TYPE_XDP, some old kernels already support XDP program, but they
don't yet recognize expected_attach_type field in bpf_attr, so setting it to
non-zero value causes program load to fail.
Luckily, libbpf already has a mechanism to deal with such cases, so just make
expected_attach_type optional for XDP programs.
Fixes: dc8698cac7aa ("libbpf: Add support for BPF XDP link")
Reported-by: Nikita Shirokov <tehnerd@tehnerd.com>
Reported-by: Udip Pant <udippant@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200924171705.3803628-1-andriin@fb.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
The synthesized event TIME_CONV doesn't contain the complete parameters
for counters, this will lead to wrong conversion between counter cycles
and timestamp.
This patch extends event TIME_CONV to record flags 'cap_user_time_zero'
which is used to indicate the counter parameters are valid or not, if
not will directly return 0 for timestamp calculation. And record the
flag 'cap_user_time_short' and its relevant fields 'time_cycles' and
'time_mask' for cycle calibration.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kemeng Shi <shikemeng@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Gasson <nick.gasson@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steve Maclean <steve.maclean@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zou Wei <zou_wei@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200914115311.2201-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Code in btf__parse_raw() fails to detect raw BTF of non-native endianness
and assumes it must be ELF data, which then fails to parse as ELF and
yields a misleading error message:
root:/# bpftool btf dump file /sys/kernel/btf/vmlinux
libbpf: failed to get EHDR from /sys/kernel/btf/vmlinux
For example, this could occur after cross-compiling a BTF-enabled kernel
for a target with non-native endianness, which is currently unsupported.
Check for correct endianness and emit a clearer error message:
root:/# bpftool btf dump file /sys/kernel/btf/vmlinux
libbpf: non-native BTF endianness is not supported
Fixes: 94a1fedd63ed ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/90f81508ecc57bc0da318e0fe0f45cfe49b17ea7.1600417359.git.Tony.Ambardar@gmail.com
Alexei Starovoitov says:
====================
pull-request: bpf 2020-09-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 19 day(s) which contain
a total of 10 files changed, 47 insertions(+), 38 deletions(-).
The main changes are:
1) docs/bpf fixes, from Andrii.
2) ld_abs fix, from Daniel.
3) socket casting helpers fix, from Martin.
4) hash iterator fixes, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch adds a simple wrapper bpf_prog_bind_map around the syscall.
When the libbpf tries to load a program, it will probe the kernel for
the support of this syscall and unconditionally bind .rodata section
to the program.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Link: https://lore.kernel.org/bpf/20200915234543.3220146-4-sdf@google.com
When syncing latest libbpf repo to bcc, ubuntu 16.04 (4.4.0 LTS kernel)
failed compilation for xsk.c:
In file included from /tmp/debuild.0jkauG/bcc/src/cc/libbpf/src/xsk.c:23:0:
/tmp/debuild.0jkauG/bcc/src/cc/libbpf/src/xsk.c: In function ‘xsk_get_ctx’:
/tmp/debuild.0jkauG/bcc/src/cc/libbpf/include/linux/list.h:81:9: warning: implicit
declaration of function ‘container_of’ [-Wimplicit-function-declaration]
container_of(ptr, type, member)
^
/tmp/debuild.0jkauG/bcc/src/cc/libbpf/include/linux/list.h:83:9: note: in expansion
of macro ‘list_entry’
list_entry((ptr)->next, type, member)
...
src/cc/CMakeFiles/bpf-static.dir/build.make:209: recipe for target
'src/cc/CMakeFiles/bpf-static.dir/libbpf/src/xsk.c.o' failed
Commit 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
added include file <linux/list.h>, which uses macro "container_of".
xsk.c file also includes <linux/ethtool.h> before <linux/list.h>.
In a more recent distro kernel, <linux/ethtool.h> includes <linux/kernel.h>
which contains the macro definition for "container_of". So compilation is all fine.
But in ubuntu 16.04 kernel, <linux/ethtool.h> does not contain <linux/kernel.h>
which caused the above compilation error.
Let explicitly add <linux/kernel.h> in xsk.c to avoid compilation error
in old distro's.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200914223210.1831262-1-yhs@fb.com
Encountered the following failure building libbpf from kernel 5.8.5 sources
with GCC 8.4.0 and binutils 2.34: (long paths shortened)
Warning: Num of global symbols in sharedobjs/libbpf-in.o (234) does NOT
match with num of versioned symbols in libbpf.so (236). Please make sure
all LIBBPF_API symbols are versioned in libbpf.map.
--- libbpf_global_syms.tmp 2020-09-02 07:30:58.920084380 +0000
+++ libbpf_versioned_syms.tmp 2020-09-02 07:30:58.924084388 +0000
@@ -1,3 +1,5 @@
+_fini
+_init
bpf_btf_get_fd_by_id
bpf_btf_get_next_id
bpf_create_map
make[4]: *** [Makefile:210: check_abi] Error 1
Investigation shows _fini and _init are actually local symbols counted
amongst global ones:
$ readelf --dyn-syms --wide libbpf.so|head -10
Symbol table '.dynsym' contains 343 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00004098 0 SECTION LOCAL DEFAULT 11
2: 00004098 8 FUNC LOCAL DEFAULT 11 _init@@LIBBPF_0.0.1
3: 00023040 8 FUNC LOCAL DEFAULT 14 _fini@@LIBBPF_0.0.1
4: 00000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.0.4
5: 00000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.0.1
6: 0000ffa4 8 FUNC GLOBAL DEFAULT 12 bpf_object__find_map_by_offset@@LIBBPF_0.0.1
A previous commit filtered global symbols in sharedobjs/libbpf-in.o. Do the
same with the libbpf.so DSO for consistent comparison.
Fixes: 306b267cb3c4 ("libbpf: Verify versioned symbols")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200905214831.1565465-1-Tony.Ambardar@gmail.com
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Detected by LGTM static analyze in Github repo, fix potential multiplication
overflow before result is casted to size_t.
Fixes: 8505e8709b5e ("libbpf: Implement generalized .BTF.ext func/line info adjustment")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200904041611.1695163-2-andriin@fb.com
Another issue of __u64 needing either %lu or %llu, depending on the
architecture. Fix with cast to `unsigned long long`.
Fixes: 7e06aad52929 ("libbpf: Add multi-prog section support for struct_ops")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200904041611.1695163-1-andriin@fb.com
BPF program title is ambigious and misleading term. It is ELF section name, so
let's just call it that and deprecate bpf_program__title() API in favor of
bpf_program__section_name().
Additionally, using bpf_object__find_program_by_title() is now inherently
dangerous and ambiguous, as multiple BPF program can have the same section
name. So deprecate this API as well and recommend to switch to non-ambiguous
bpf_object__find_program_by_name().
Internally, clean up usage and mis-usage of BPF program section name for
denoting BPF program name. Shorten the field name to prog->sec_name to be
consistent with all other prog->sec_* variables.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200903203542.15944-11-andriin@fb.com
Complete multi-prog sections and multi sub-prog support in libbpf by properly
adjusting .BTF.ext's line and function information. Mark exposed
btf_ext__reloc_func_info() and btf_ext__reloc_func_info() APIs as deprecated.
These APIs have simplistic assumption that all sub-programs are going to be
appended to all main BPF programs, which doesn't hold in real life. It's
unlikely there are any users of this API, as it's very libbpf
internals-specific.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200903203542.15944-6-andriin@fb.com
This patch implements general and correct logic for bpf-to-bpf sub-program
calls. Only sub-programs used (called into) from entry-point (main) BPF
program are going to be appended at the end of main BPF program. This ensures
that BPF verifier won't encounter any dead code due to copying unreferenced
sub-program. This change means that each entry-point (main) BPF program might
have a different set of sub-programs appended to it and potentially in
different order. This has implications on how sub-program call relocations
need to be handled, described below.
All relocations are now split into two categores: data references (maps and
global variables) and code references (sub-program calls). This distinction is
important because data references need to be relocated just once per each BPF
program and sub-program. These relocation are agnostic to instruction
locations, because they are not code-relative and they are relocating against
static targets (maps, variables with fixes offsets, etc).
Sub-program RELO_CALL relocations, on the other hand, are highly-dependent on
code position, because they are recorded as instruction-relative offset. So
BPF sub-programs (those that do calls into other sub-programs) can't be
relocated once, they need to be relocated each time such a sub-program is
appended at the end of the main entry-point BPF program. As mentioned above,
each main BPF program might have different subset and differen order of
sub-programs, so call relocations can't be done just once. Splitting data
reference and calls relocations as described above allows to do this
efficiently and cleanly.
bpf_object__find_program_by_name() will now ignore non-entry BPF programs.
Previously one could have looked up '.text' fake BPF program, but the
existence of such BPF program was always an implementation detail and you
can't do much useful with it. Now, though, all non-entry sub-programs get
their own BPF program with name corresponding to a function name, so there is
no more '.text' name for BPF program. This means there is no regression,
effectively, w.r.t. API behavior. But this is important aspect to highlight,
because it's going to be critical once libbpf implements static linking of BPF
programs. Non-entry static BPF programs will be allowed to have conflicting
names, but global and main-entry BPF program names should be unique. Just like
with normal user-space linking process. So it's important to restrict this
aspect right now, keep static and non-entry functions as internal
implementation details, and not have to deal with regressions in behavior
later.
This patch leaves .BTF.ext adjustment as is until next patch.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200903203542.15944-5-andriin@fb.com
Fix up CO-RE relocation code to handle relocations against ELF sections
containing multiple BPF programs. This requires lookup of a BPF program by its
section name and instruction index it contains. While it could have been done
as a simple loop, it could run into performance issues pretty quickly, as
number of CO-RE relocations can be quite large in real-world applications, and
each CO-RE relocation incurs BPF program look up now. So instead of simple
loop, implement a binary search by section name + insn offset.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200903203542.15944-4-andriin@fb.com
Teach libbpf how to parse code sections into potentially multiple bpf_program
instances, based on ELF FUNC symbols. Each BPF program will keep track of its
position within containing ELF section for translating section instruction
offsets into program instruction offsets: regardless of BPF program's location
in ELF section, it's first instruction is always at local instruction offset
0, so when libbpf is working with relocations (which use section-based
instruction offsets) this is critical to make proper translations.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200903203542.15944-3-andriin@fb.com
libbpf ELF parsing logic might need symbols available before ELF parsing is
completed, so we need to make sure that symbols table section is found in
a separate pass before all the subsequent sections are processed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200903203542.15944-2-andriin@fb.com
Fixed a compilation warning for casting to pointer from integer of
different size on 32-bit platforms.
Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-09-01
The following pull-request contains BPF updates for your *net-next* tree.
There are two small conflicts when pulling, resolve as follows:
1) Merge conflict in tools/lib/bpf/libbpf.c between 88a82120282b ("libbpf: Factor
out common ELF operations and improve logging") in bpf-next and 1e891e513e16
("libbpf: Fix map index used in error message") in net-next. Resolve by taking
the hunk in bpf-next:
[...]
scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx);
data = elf_sec_data(obj, scn);
if (!scn || !data) {
pr_warn("elf: failed to get %s map definitions for %s\n",
MAPS_ELF_SEC, obj->path);
return -EINVAL;
}
[...]
2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between
9647c57b11e5 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for
better performance") in bpf-next and e20f0dbf204f ("net/mlx5e: RX, Add a prefetch
command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining
net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like:
[...]
xdp_set_data_meta_invalid(xdp);
xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool);
net_prefetch(xdp->data);
[...]
We've added 133 non-merge commits during the last 14 day(s) which contain
a total of 246 files changed, 13832 insertions(+), 3105 deletions(-).
The main changes are:
1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper
for tracing to reliably access user memory, from Alexei Starovoitov.
2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau.
3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa.
4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson.
5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko.
6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh.
7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer.
8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song.
9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant.
10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee.
11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua.
12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski.
13) Various smaller cleanups and improvements all over the place.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for shared umems between hardware queues and devices to
the AF_XDP part of libbpf. This so that zero-copy can be achieved in
applications that want to send and receive packets between HW queues
on one device or between different devices/netdevs.
In order to create sockets that share a umem between hardware queues
and devices, a new function has been added called
xsk_socket__create_shared(). It takes the same arguments as
xsk_socket_create() plus references to a fill ring and a completion
ring. So for every socket that share a umem, you need to have one more
set of fill and completion rings. This in order to maintain the
single-producer single-consumer semantics of the rings.
You can create all the sockets via the new xsk_socket__create_shared()
call, or create the first one with xsk_socket__create() and the rest
with xsk_socket__create_shared(). Both methods work.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-14-git-send-email-magnus.karlsson@intel.com
While compiling libbpf, some GCC versions (at least 8.4.0) have difficulty
determining control flow and a emit warning for potentially uninitialized
usage of 'map', which results in a build error if using "-Werror":
In file included from libbpf.c:56:
libbpf.c: In function '__bpf_object__open':
libbpf_internal.h:59:2: warning: 'map' may be used uninitialized in this function [-Wmaybe-uninitialized]
libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \
^~~~~~~~~~~~
libbpf.c:5032:18: note: 'map' was declared here
struct bpf_map *map, *targ_map;
^~~
The warning/error is false based on code inspection, so silence it with a
NULL initialization.
Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Reference: 063e68813391 ("libbpf: Fix false uninitialized variable warning")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200831000304.1696435-1-Tony.Ambardar@gmail.com
Pass request to load program as sleepable via ".s" suffix in the section name.
If it happens in the future that all map types and helpers are allowed with
BPF_F_SLEEPABLE flag "fmod_ret/" and "lsm/" can be aliased to "fmod_ret.s/" and
"lsm.s/" to make all lsm and fmod_ret programs sleepable by default. The fentry
and fexit programs would always need to have sleepable vs non-sleepable
distinction, since not all fentry/fexit progs will be attached to sleepable
kernel functions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-5-alexei.starovoitov@gmail.com
