IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch adds platform dependency into the test case 15
(perf_event_attr). It is based on a suggestion from Jiri Olsa.
Add a new optional attribute named 'arch' in the [config] section of the
test case file. It is a comma separated list of architecture names this
test can be executed on. For example:
arch = x86_64,alpha,ppc
If this attribute is missing the test is executed on any platform. This
does not break existing behavior.
The values listed for this attribute should be identical to uname -m
output.
If the list starts with an exclamation mark (!) the comparison is
inverted, for example for
arch = !s390x,ppc
the test is not executed on s390x or ppc platforms. The exclamation
mark must be at the beginnning of the list.
Here is an example debug output:
[root@s35lp76]# fgrep arch tests/attr/test-stat-C2
arch = x86_64,alpha,ppc
[root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \
-d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1
provides the following output:
running './tests/attr//test-stat-C1'
test limitation 'x86_64,alpha,ppc' <--- new
loading expected events
Event event:base-stat
fd = 1
group_fd = -1
.....
Here is the output when a test is skipped:
[root@s35lp76]# fgrep arch tests/attr/test-stat-C1
arch = !s390x
[root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \
-d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1
provides the following output:
test limitation '!s390x' <--- new
skipped [s390x] './tests/attr//test-stat-C1' <--- new
The test is skipped with return code 0.
Suggested-and-Acked-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20170622073625.86762-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'transactions_sample_type' is needed to correctly inject transactions
samples but it was not being set. Set it from the event sample type.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-18-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'initial_skip' is checked inside the sample synthesis functions which means
it is actually being done twice for 'instructions' and 'transactions'
samples. Remove the redundant checks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Future proof CBR packet decoding by passing through also the undefined
'reserved' byte in the packet payload.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add decoder support for PTWRITE, MWAIT, PWRE, PWRX and EXSTOP packets. This
patch only affects the decoder, so the tools still do not select or consume
the new information. That is added in subsequent patches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Branch tracing is enabled by default, so a fake config bit called 'pt'
(pass-through) was added to allow the 'branch enable' bit to have affect.
Add default config 'pt,branch' which will allow users to disable branch
tracing using 'branch=0' instead of having to specify 'pt,branch=0'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel now supports the disabling of branch tracing, however the
decoder assumes branch tracing is always enabled. Pass through a parameter
to indicate whether branch tracing is enabled and use it to avoid cases
when the decoder is expecting branch packets. There are 2 such cases.
First, FUP packets which can bind to an IP even when there is no branch
tracing. Secondly, the decoder will try to use branch packets to find an IP
to start decoding or to recover from errors.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes a FUP packet is associated with a TSX transaction and a flag is
set to indicate that. Ensure that flag is cleared on any error condition
because at that point the decoder can no longer assume it is correct.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decoder will try to use branch packets to find an IP to start decoding
or to recover from errors. Currently the FUP packet is used only in the
case of an overflow, however there is no reason for that to be a special
case. So just use FUP always when scanning for an IP.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT uses IP compression based on the last IP. For decoding purposes,
'last IP' is not updated when a branch target has been suppressed, which is
indicated by IPBytes == 0. IPBytes is stored in the packet 'count', so
ensure never to set 'last_ip' when packet 'count' is zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT uses IP compression based on the last IP. For decoding
purposes, 'last IP' is considered to be reset to zero whenever there is
a synchronization packet (PSB). The decoder wasn't doing that, and was
treating the zero value to mean that there was no last IP, whereas
compression can be done against the zero value. Fix by setting last_ip
to zero when a PSB is received and keep track of have_last_ip.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached. Improve that situation by using the pkt_state to
determine when to use the current or previous timestamp.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Porting PPC to libdw only needs an architecture-specific hook to move
the register state from perf to libdw.
The ARM and x86 architectures already use libdw, and it is useful to
have as much common code for the unwinder as possible. Mark Wielaard
has contributed a frame-based unwinder to libdw, so that unwinding works
even for binaries that do not have CFI information. In addition,
libunwind is always preferred to libdw by the build machinery so this
cannot introduce regressions on machines that have both libunwind and
libdw installed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1496312681-20133-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implementing a new --smi-cost mode in perf stat to measure SMI cost.
During the measurement, the /sys/device/cpu/freeze_on_smi will be set.
The measurement can be done with one counter (unhalted core cycles), and
two free running MSR counters (IA32_APERF and SMI_COUNT).
In practice, the percentages of SMI core cycles should be more useful
than absolute value. So the output will be the percentage of SMI core
cycles and SMI#. metric_only will be set by default.
SMI cycles% = (aperf - unhalted core cycles) / aperf
Here is an example output.
Performance counter stats for 'sudo echo ':
SMI cycles% SMI#
0.1% 1
0.010858678 seconds time elapsed
Users who wants to get the actual value can apply additional
--no-metric-only.
Signed-off-by: Kan Liang <Kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495825538-5230-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add sysfs__write_int() to ease up writing int to sysfs. New interface
is:
int sysfs__write_int(const char *entry, int value);
Also, introducing filename__write_int() which is useful for new helpers
to write sysctl values.
Signed-off-by: Kan Liang <Kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495825538-5230-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Curious as to what this was for I looked at /usr/include/ and only some
python headers define this, and it ends up being to enable "extensions"
on some old OSes:
/* Enable extensions on AIX 3, Interix */
I guess we can remove this one safely.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-omnundlxo2brs552bdl6m0j1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While trying to reduce util.[ch] I noticed that fetch_kernel_version()
and fetch_ubuntu_kernel_version() do lots of operations only to check if
they are needed, i.e. it checks if the pointer where to return the
kernel version is NULL only after obtaining the kernel version from
/proc/version_signature or by parsing the results from uname().
Do it earlier not to confuse people reading this code in the future :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i94qwyekk4tzbu0b9ce1r1mz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And make it static, nobody else uses it, if we ever need it in more
places we can carve a new source file for process related methods,
for now lets reduce util.{c,h} a tad more.
Link: http://lkml.kernel.org/n/tip-zgb28rllvypjibw52aaz9p15@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Allow adding and removing fields to the default 'perf script' columns,
using + or - as field prefixes to do so (Andi Kleen)
- Display titles in left frame in the annotate browser (Jin Yao)
- Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
(Mark Santaniello)
- Support function filtering in 'perf ftrace' (Namhyung Kim)
- Allow specifying function call depth in 'perf ftrace' (Namhyumg Kim)
Infrastructure:
- Adopt __noreturn, __printf, __scanf, noinline, __packed and __aligned
__alignment__(()) markers, to make the tools/ source code base to be
more compact and look more like kernel code (Arnaldo Carvalho de Melo)
- Remove unnecessary check in annotate_browser_write() (Jin Yao)
- Return arch from symbol__disassemble() so that callers, such as
the annotate TUI browser to use arch specific formattings, such
as the upcoming instruction micro-op fusion on Intel Core (Jin Yao)
- Remove superfluous check before use in the coresight code base (Kim
Phillips)
- Remove unused SAMPLE_SIZE defines and BTS priv array (Kim Phillips)
- Error handling fix/tidy ups in 'perf config' (Taeung Song)
- Avoid error in the BPF proggie built with clang in 'perf test llvm'
when PROFILE_ALL_BRANCHES is set (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wK/k
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.13-20170719' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Allow adding and removing fields to the default 'perf script' columns,
using + or - as field prefixes to do so (Andi Kleen)
- Display titles in left frame in the annotate browser (Jin Yao)
- Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
(Mark Santaniello)
- Support function filtering in 'perf ftrace' (Namhyung Kim)
- Allow specifying function call depth in 'perf ftrace' (Namhyumg Kim)
Infrastructure changes:
- Adopt __noreturn, __printf, __scanf, noinline, __packed and __aligned
__alignment__(()) markers, to make the tools/ source code base to be
more compact and look more like kernel code (Arnaldo Carvalho de Melo)
- Remove unnecessary check in annotate_browser_write() (Jin Yao)
- Return arch from symbol__disassemble() so that callers, such as
the annotate TUI browser to use arch specific formattings, such
as the upcoming instruction micro-op fusion on Intel Core (Jin Yao)
- Remove superfluous check before use in the coresight code base (Kim
Phillips)
- Remove unused SAMPLE_SIZE defines and BTS priv array (Kim Phillips)
- Error handling fix/tidy ups in 'perf config' (Taeung Song)
- Avoid error in the BPF proggie built with clang in 'perf test llvm'
when PROFILE_ALL_BRANCHES is set (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To simplify the code related to 'ret' variable in cmd_config(),
initialize 'ret' with -1 instead of 0 and use goto to perform resource
release at the end of the function, setting ret to zero just before the
out_err label, as usual in the kernel sources.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671202-20495-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show_spec_config() and set_config() can be called multiple times
in the loop in cmd_config().
However, The error cases of them wasn't checked, so fix it.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671197-20450-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -D/--graph-depth option is to set max graph depth. The following
example traces max 2-depth of page fault handler.
$ sudo perf ftrace -G __do_page_fault -D 2 -- hello
...
0) | __do_page_fault() {
0) 0.063 us | down_read_trylock();
0) 0.251 us | find_vma();
0) 5.374 us | handle_mm_fault();
0) 0.054 us | up_read();
0) 7.463 us | }
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf ftrace' command fails to reset tracer after finishing
recording like below:
$ sudo perf ftrace -v hello
write 'nop' to tracing/current_tracer failed: Device or resource busy
...
This is because the trace_pipe file is open in pager process. Move the
pager setup to before opening the file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Fixes: 583359646f ("perf ftrace: Use pager for displaying result")
Link: http://lkml.kernel.org/r/20170618142302.25390-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'd be better for debugging to show an error message when it fails to
setup ftrace for some reason.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf script can report the dso for "addr" and "ip" fields.
This adds the same support for the "brstack" and "brstacksym" fields.
This can be helpful for AutoFDO: we can ignore LBR entries unless the
source and target address are both in the target module we are about to
build.
I built a small test akin to "while(1) { do_nothing(); }" where the
do_nothing function is loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution with perf record -b. Using the new perf script
functionality I can easily find cases where there was a transition from one
dso to another:
$ perf record -a -b -- sleep 5
[ perf record: Woken up 55 times to write data ]
[ perf record: Captured and wrote 18.815 MB perf.data (43593 samples) ]
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-1-marksan@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'if' keyword is a define that expands to complex code when
CONFIG_PROFILE_ALL_BRANCHES is selected, which causes a 'perf test LLVM'
failure like:
$ ./perf test LLVM
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: FAILED!
35.4: Compile source for BPF relocation : Skip
The only affected test case is bpf-script-test-prologue.c
because it uses kernel headers and has 'if' inside.
This patch undefines 'if' to make it passes perf test.
More detailed analysis from a message in this thread, also by Wang:
The problem is caused by following relocation information:
$ readelf -a ./llvmsubtest3
...
[ 5] _ftrace_branch PROGBITS 0000000000000000 00000260
00000000000000a0 0000000000000000 WA 0 0 4
...
Relocation section '.relfunc=null_lseek file->f_mode offset orig' at
offset 0x490 contains 4 entries:
Offset Info Type Sym. Value Sym. Name
000000000038 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
0000000000b0 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
000000000128 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
0000000001c0 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
Relocation section '.rel_ftrace_branch' at offset 0x4d0 contains 8 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000008 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000028 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000030 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000050 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000058 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000078 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000080 000100000001 unrecognized: 1 0000000000000015 .L.str
...
So I think the failure is because you enabled CONFIG_PROFILE_ALL_BRANCHES.
I can reproduce your buggy result by selecting
CONFIG_PROFILE_ALL_BRANCHES in my kbuild:
$ ./perf test LLVM
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: FAILED!
35.4: Compile source for BPF relocation : Skip
Simply undef CONFIG_PROFILE_ALL_BRANCHES in clang opts not working
because it is introduced by "#include <uapi/linux/fs.h>", which override
cmdline options. So I think the best way is to undefine 'if' inside BPF
script.
Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/20170620183203.2517-1-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In annotate browser, we will add support to check fused instructions.
While this is x86-specific feature so we need the annotate browser to
know what the arch it runs on.
symbol__disassemble() has figured out the arch. This patch just lets the
arch return from symbol__disassemble and save the arch in annotate
browser.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1497840958-4759-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These defines were probably dragged in from sampling support in earlier
patches. They can be put back when needed.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170616112339.3fb6986e4ff33e353008244b@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cs_etm_evsel variable is guaranteed to be set at this point in
cs_etm_recording_options().
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170615125521.80cc128dc856bc1f2e61b730@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to use a specific
alignment, making tools/ look more like kernel source code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8jiem6ubg9rlpbs7c2p900no@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to not insert alignment
paddings in a struct, making tools/ look more like kernel source code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-byp46nr7hsxvvyc9oupfb40q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler not to inline a function
and to make tools/ source code look like kernel code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bis4pqxegt6gbm5dlqs937tn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of defining __unused or redefining __maybe_unused.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4eleto5pih31jw1q4dypm9pf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to perform scanf like
argument validation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yzqrhfjrn26lqqtwf55egg0h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to perform printf like
vargargs validation.
v2: Fixed up build on arm, squashing a patch by Kim Phillips, thanks!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dopkqmmuqs04cxzql0024nnu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to specify that a function doesn't return,
instead of the open coded:
__attribute__((noreturn))
And use it instead of the tools/perf/ specific variation, NORETURN.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l0y144qzixcy5t4c6i7pdiqj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate browser is divided into 2 frames. Left frame contains 3
columns (some platforms only have one column).
For example:
│26 int compute_flag()
│27 {
22.80 1.20 │ sub $0x8,%rsp
│25 int i;
│
│27 i = rand() % 2;
22.78 1.20 1 │ → callq rand@plt
While it's hard for user to understand what the data is.
This patch adds the titles "Percent", "IPC" and "Cycle" on columns.
Percent IPC Cycle │
│25 __attribute__((noinline))
│26 int compute_flag()
│27 {
22.80 1.20 │ sub $0x8,%rsp
│25 int i;
│
│27 i = rand() % 2;
22.78 1.20 1 │ → callq rand@plt
The titles are displayed at row 0 of annotate browser if row 0 doesn't
have values of percent, ipc and cycle.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In annotate_browser_write(),
if (dl->offset != -1 && percent_max != 0.0) {
if (percent_max != 0.0) {
...
}
...
}
The second check of (percent_max != 0.0) is not necessary, remove it.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
