IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Previously, the defines for phy_device flags in the Micrel driver were
ambiguous in their representation. They were intended to be bit masks
but were mistakenly defined as bit positions. This led to the following
issues:
- MICREL_KSZ8_P1_ERRATA, designated for KSZ88xx switches, overlapped
with MICREL_PHY_FXEN and MICREL_PHY_50MHZ_CLK.
- Due to this overlap, the code path for MICREL_PHY_FXEN, tailored for
the KSZ8041 PHY, was not executed for KSZ88xx PHYs.
- Similarly, the code associated with MICREL_PHY_50MHZ_CLK wasn't
triggered for KSZ88xx.
To rectify this, all three flags have now been explicitly converted to
use the `BIT()` macro, ensuring they are defined as bit masks and
preventing potential overlaps in the future.
Fixes: 49011e0c1555 ("net: phy: micrel: ksz886x/ksz8081: add cabletest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.
Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The veth_xmit function returns NETDEV_TX_OK even when packets are dropped.
This behavior leads to incorrect calculations of statistics counts, as
well as things like txq->trans_start updates.
Fixes: e314dbdc1c0d ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gve_rx_append_frags() is able to build skbs chained with frag_list,
like GRO engine.
Problem is that shinfo->frag_list should only be used
for the head of the chain.
All other links should use skb->next pointer.
Otherwise, built skbs are not valid and can cause crashes.
Equivalent code in GRO (skb_gro_receive()) is:
if (NAPI_GRO_CB(p)->last == p)
skb_shinfo(p)->frag_list = skb;
else
NAPI_GRO_CB(p)->last->next = skb;
NAPI_GRO_CB(p)->last = skb;
Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bailey Forrest <bcf@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Catherine Sullivan <csully@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Blamed commit changed:
ptr = kmalloc(size);
if (ptr)
size = ksize(ptr);
to:
size = kmalloc_size_roundup(size);
ptr = kmalloc(size);
This allowed various crash as reported by syzbot [1]
and Kyle Zeng.
Problem is that if @size is bigger than 0x80000001,
kmalloc_size_roundup(size) returns 2^32.
kmalloc_reserve() uses a 32bit variable (obj_size),
so 2^32 is truncated to 0.
kmalloc(0) returns ZERO_SIZE_PTR which is not handled by
skb allocations.
Following trace can be triggered if a netdev->mtu is set
close to 0x7fffffff
We might in the future limit netdev->mtu to more sensible
limit (like KMALLOC_MAX_SIZE).
This patch is based on a syzbot report, and also a report
and tentative fix from Kyle Zeng.
[1]
BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline]
BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554
CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Call trace:
dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106
print_report+0xe4/0x4b4 mm/kasan/report.c:398
kasan_report+0x150/0x1ac mm/kasan/report.c:495
kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
memset+0x40/0x70 mm/kasan/shadow.c:44
__build_skb_around net/core/skbuff.c:294 [inline]
__alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
alloc_skb include/linux/skbuff.h:1316 [inline]
igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359
add_grec+0x81c/0x1124 net/ipv4/igmp.c:534
igmpv3_send_cr net/ipv4/igmp.c:667 [inline]
igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810
call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x54c/0x710 kernel/time/timer.c:1790
run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803
_stext+0x380/0xfbc
____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79
call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891
do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84
invoke_softirq kernel/softirq.c:437 [inline]
__irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683
irq_exit_rcu+0x14/0x78 kernel/softirq.c:695
el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717
__el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724
el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729
el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584
Fixes: 12d6c1d3a2ad ("skbuff: Proactively round up to kmalloc bucket size")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
In current packed virtqueue implementation, the avail_wrap_counter won't
flip, in the case when the driver supplies a descriptor chain with a
length equals to the queue size; total_sg == vq->packed.vring.num.
Let’s assume the following situation:
vq->packed.vring.num=4
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 0
Then the driver adds a descriptor chain containing 4 descriptors.
We expect the following result with avail_wrap_counter flipped:
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 1
But, the current implementation gives the following result:
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 0
To reproduce the bug, you can set a packed queue size as small as
possible, so that the driver is more likely to provide a descriptor
chain with a length equal to the packed queue size. For example, in
qemu run following commands:
sudo qemu-system-x86_64 \
-enable-kvm \
-nographic \
-kernel "path/to/kernel_image" \
-m 1G \
-drive file="path/to/rootfs",if=none,id=disk \
-device virtio-blk,drive=disk \
-drive file="path/to/disk_image",if=none,id=rwdisk \
-device virtio-blk,drive=rwdisk,packed=on,queue-size=4,\
indirect_desc=off \
-append "console=ttyS0 root=/dev/vda rw init=/bin/bash"
Inside the VM, create a directory and mount the rwdisk device on it. The
rwdisk will hang and mount operation will not complete.
This commit fixes the wrap counter error by flipping the
packed.avail_wrap_counter, when start of descriptor chain equals to the
end of descriptor chain (head == i).
Fixes: 1ce9e6055fa0 ("virtio_ring: introduce packed ring support")
Signed-off-by: Yuan Yao <yuanyaogoog@chromium.org>
Message-Id: <20230808051110.3492693-1-yuanyaogoog@chromium.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We try to build affinity mask via create_affinity_masks()
unconditionally which may lead several issues:
- the affinity mask is not used for parent without affinity support
(only VDUSE support the affinity now)
- the logic of create_affinity_masks() might not work for devices
other than block. For example it's not rare in the networking device
where the number of queues could exceed the number of CPUs. Such
case breaks the current affinity logic which is based on
group_cpus_evenly() who assumes the number of CPUs are not less than
the number of groups. This can trigger a warning[1]:
if (ret >= 0)
WARN_ON(nr_present + nr_others < numgrps);
Fixing this by only build the affinity masks only when
- Driver passes affinity descriptor, driver like virtio-blk can make
sure to limit the number of queues when it exceeds the number of CPUs
- Parent support affinity setting config ops
This help to avoid the warning. More optimizations could be done on
top.
[1]
[ 682.146655] WARNING: CPU: 6 PID: 1550 at lib/group_cpus.c:400 group_cpus_evenly+0x1aa/0x1c0
[ 682.146668] CPU: 6 PID: 1550 Comm: vdpa Not tainted 6.5.0-rc5jason+ #79
[ 682.146671] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[ 682.146673] RIP: 0010:group_cpus_evenly+0x1aa/0x1c0
[ 682.146676] Code: 4c 89 e0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc e8 1b c4 74 ff 48 89 ef e8 13 ac 98 ff 4c 89 e7 45 31 e4 e8 08 ac 98 ff eb c2 <0f> 0b eb b6 e8 fd 05 c3 00 45 31 e4 eb e5 cc cc cc cc cc cc cc cc
[ 682.146679] RSP: 0018:ffffc9000215f498 EFLAGS: 00010293
[ 682.146682] RAX: 000000000001f1e0 RBX: 0000000000000041 RCX: 0000000000000000
[ 682.146684] RDX: ffff888109922058 RSI: 0000000000000041 RDI: 0000000000000030
[ 682.146686] RBP: ffff888109922058 R08: ffffc9000215f498 R09: ffffc9000215f4a0
[ 682.146687] R10: 00000000000198d0 R11: 0000000000000030 R12: ffff888107e02800
[ 682.146689] R13: 0000000000000030 R14: 0000000000000030 R15: 0000000000000041
[ 682.146692] FS: 00007fef52315740(0000) GS:ffff888237380000(0000) knlGS:0000000000000000
[ 682.146695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 682.146696] CR2: 00007fef52509000 CR3: 0000000110dbc004 CR4: 0000000000370ee0
[ 682.146698] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 682.146700] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 682.146701] Call Trace:
[ 682.146703] <TASK>
[ 682.146705] ? __warn+0x7b/0x130
[ 682.146709] ? group_cpus_evenly+0x1aa/0x1c0
[ 682.146712] ? report_bug+0x1c8/0x1e0
[ 682.146717] ? handle_bug+0x3c/0x70
[ 682.146721] ? exc_invalid_op+0x14/0x70
[ 682.146723] ? asm_exc_invalid_op+0x16/0x20
[ 682.146727] ? group_cpus_evenly+0x1aa/0x1c0
[ 682.146729] ? group_cpus_evenly+0x15c/0x1c0
[ 682.146731] create_affinity_masks+0xaf/0x1a0
[ 682.146735] virtio_vdpa_find_vqs+0x83/0x1d0
[ 682.146738] ? __pfx_default_calc_sets+0x10/0x10
[ 682.146742] virtnet_find_vqs+0x1f0/0x370
[ 682.146747] virtnet_probe+0x501/0xcd0
[ 682.146749] ? vp_modern_get_status+0x12/0x20
[ 682.146751] ? get_cap_addr.isra.0+0x10/0xc0
[ 682.146754] virtio_dev_probe+0x1af/0x260
[ 682.146759] really_probe+0x1a5/0x410
Fixes: 3dad56823b53 ("virtio-vdpa: Support interrupt affinity spreading mechanism")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230811091539.1359865-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the virtio core will perform a dma operation for each
buffer. Although, the same page may be operated multiple times.
This patch, the driver does the dma operation and manages the dma
address based the feature premapped of virtio core.
This way, we can perform only one dma operation for the pages of the
alloc frag. This is beneficial for the iommu device.
kernel command line: intel_iommu=on iommu.passthrough=0
| strict=0 | strict=1
Before | 775496pps | 428614pps
After | 1109316pps | 742853pps
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-13-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These API has been introduced:
* virtqueue_dma_need_sync
* virtqueue_dma_sync_single_range_for_cpu
* virtqueue_dma_sync_single_range_for_device
These APIs can be used together with the premapped mechanism to sync the
DMA address.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-12-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added virtqueue_dma_map_api* to map DMA addresses for virtual memory in
advance. The purpose is to keep memory mapped across multiple add/get
buf operations.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-11-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce virtqueue_reset() to release all buffer inside vq.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230810123057.43407-10-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The subsequent reset function will reuse these logic.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230810123057.43407-9-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Modify the "useless" to a more accurate "unused".
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230810123057.43407-8-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we add a case where we skip dma unmap, the vq->premapped is true.
We can't just rely on use_dma_api to determine whether to skip the dma
operation. For convenience, I introduced the "do_unmap". By default, it
is the same as use_dma_api. If the driver is configured with premapped,
then do_unmap is false.
So as long as do_unmap is false, for addr of desc, we should skip dma
unmap operation.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-7-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added virtqueue_dma_dev() to get DMA device for virtio. Then the
caller can do dma operation in advance. The purpose is to keep memory
mapped across multiple add/get buf operations.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230810123057.43407-6-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vq is the premapped mode, use the sg_dma_address() directly.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-5-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This helper allows the driver change the dma mode to premapped mode.
Under the premapped mode, the virtio core do not do dma mapping
internally.
This just work when the use_dma_api is true. If the use_dma_api is false,
the dma options is not through the DMA APIs, that is not the standard
way of the linux kernel.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-4-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch put the dma addr error check in vring_map_one_sg().
The benefits of doing this:
1. reduce one judgment of vq->use_dma_api.
2. make vring_map_one_sg more simple, without calling
vring_mapping_error to check the return value. simplifies subsequent
code
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230810123057.43407-3-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Inside detach_buf_split(), if use_dma_api is false,
vring_unmap_one_split_indirect will be called many times, but actually
nothing is done. So this patch check use_dma_api firstly.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230810123057.43407-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Start offering the feature in the simulator. Other parent drivers can
follow this code to offer it too.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-5-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This operation allow vdpa parent to expose its own backend feature bits.
Next patches introduce a feature not compatible with all parent drivers:
the ability to enable vq after driver_ok. Each parent must declare if
it allows it or not.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-4-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Accepting VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK backend feature if
userland sets it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-3-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This feature flag allows the driver enabling virtqueues both before and
after DRIVER_OK.
This is needed for software assisted live migration, so userland can
restore the device status in devices with control virtqueue before the
dataplane is enabled.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-2-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 29064bfdabd5 ("vdpa/mlx5: Add support library for mlx5 VDPA implementation")
declared but never implemented these.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Message-Id: <20230803143041.23388-1-yuehaibing@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding
-----BEGIN PGP SIGNATURE-----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=LPWk
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New controller support and updates to drivers.
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding"
* tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits)
dmaengine: fsl-edma: integrate v3 support
dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
dmaengine: fsl-edma: refactor chan_name setup and safety
dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
dmaengine: fsl-edma: refactor using devm_clk_get_enabled
dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
dmaengine: fsl-edma: move common IRQ handler to common.c
dmaengine: fsl-edma: Remove enum edma_version
dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
dmaengine: fsl-edma: fix build error when arch is s390
dmaengine: idxd: Fix issues with PRS disable sysfs knob
dmaengine: idxd: Allow ATS disable update only for configurable devices
dmaengine: xilinx_dma: Program interrupt delay timeout
dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
...
- Core support for soundwire device number allocation
- intel driver updates for adding hw_params for DAI ops, hybrid number
allocation and power managemnt callback updates
- DT header include changes for subsystem
-----BEGIN PGP SIGNATURE-----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=4w8N
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"Device numbering and intel driver changes are main features:
- Core support for soundwire device number allocation
- intel driver updates for adding hw_params for DAI ops, hybrid
number allocation and power managemnt callback updates
- DT header include changes for subsystem"
* tag 'soundwire-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add DAI hw_params/prepare/hw_free callbacks
soundwire: intel_auxdevice: add hybrid IDA-based device_number allocation
soundwire: bus: add callbacks for device_number allocation
soundwire: extend parameters of new_peripheral_assigned() callback
soundWire: intel_auxdevice: resume 'sdw-master' on startup and system resume
soundwire: intel_auxdevice: enable pm_runtime earlier on startup
soundwire: Explicitly include correct DT includes
Currently the Kconfig fragments in kernel/configs and arch/*/configs
that aren't used internally aren't discoverable through "make help",
which consists of hard-coded lists of config fragments. Instead, list
all the fragment targets that have a "# Help: " comment prefix so the
targets can be generated dynamically.
Add logic to the Makefile to search for and display the fragment and
comment. Add comments to fragments that are intended to be direct targets.
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* Use refcount to prevent corruption
* Call external _get and _put in right order
* Fix use-after-free in mtd release
* Explicitly include correct DT includes
* Clean refcounting with MTD_PARTITIONED_MASTER
* mtdblock: make warning messages ratelimited
* dt-bindings: Add SEAMA partition bindings
MTD device driver changes:
* spear_smi: Use helper function devm_clk_get_enabled()
* maps: fix -Wvoid-pointer-to-enum-cast warning
* docg3: Remove unnecessary (void*) conversions
* physmap-core, spear_smi, st_spi_fsm, lpddr2_nvm, lantiq-flash, plat-ram:
- Use devm_platform_get_and_ioremap_resource()
Raw NAND core changes:
* Fix -Wvoid-pointer-to-enum-cast warning
* Export 'nand_exit_status_op()'
* dt-bindings: Fix nand-controller.yaml license
Raw NAND controller driver changes:
* Omap, Omap2, Samsung, Atmel, fsl_upm, lpc32xx_slc, lpc32xx_mlc, STM32_FMC2,
sh_ftlctl, MXC, Sunxi:
- Use devm_platform_get_and_ioremap_resource()
* Orion, vf610_nfc, Sunxi, STM32_FMC2, MTK, mpc5121, lpc32xx_slc, Intel,
FSMC, Arasan:
- Use helper function devm_clk_get_optional_enabled()
* Brcmnand:
- Use devm_platform_ioremap_resource_byname()
- Propagate init error -EPROBE_DEFER up
- Propagate error and simplify ternary operators
- Fix mtd oobsize
- Fix potential out-of-bounds access in oob write
- Fix crash during the panic_write
- Fix potential false time out warning
- Fix ECC level field setting for v7.2 controller
* fsmc: Handle clk prepare error in fsmc_nand_resume()
* Marvell: Add support for AC5 SoC
* Meson:
- Support for 512B ECC step size
- Fix build error
- Use NAND core API to check status
- dt-bindings:
* Make ECC properties dependent
* Support for 512B ECC step size
* Drop unneeded quotes
* Oxnas: Remove driver and bindings
* Qcom:
- Conversion to ->exec_op()
- Removal of the legacy interface
- Two full series of improvements/misc fixes
* Use the BIT() macro
* Use u8 instead of uint8_t
* Fix alignment with open parenthesis
* Fix the spacing
* Fix wrong indentation
* Fix a typo
* Early structure initialization
* Fix address parsing within ->exec_op()
* Remove superfluous initialization of "ret"
* Rename variables in qcom_op_cmd_mapping()
* Handle unsupported opcode in qcom_op_cmd_mapping()
* Fix the opcode check in qcom_check_op()
* Use EOPNOTSUPP instead of ENOTSUPP
* Wrap qcom_nand_exec_op() to 80 columns
* Unmap sg_list and free desc within submic_descs()
* Simplify the call to nand_prog_page_end_op()
* Do not override the error no of submit_descs()
* Sort includes alphabetically
* Clear buf_count and buf_start in raw read
* Add read/read_start ops in exec_op path
* vf610_nfc: Do not check 0 for platform_get_irq()
SPI NAND manufacturer driver changes:
* gigadevice: Add support for GD5F1GQ{4,5}RExxH
* esmt: Add support for F50D2G41KA
* toshiba: Add support for T{C,H}58NYG{0,2}S3HBAI4 and TH58NYG3S0HBAI6
SPI NOR core changes:
* fix assumption on enabling quad mode in
spi_nor_write_16bit_sr_and_check()
* avoid setting SRWD bit in SR if WP# signal not connected as it will
configure the SR permanently as read only. Add "no-wp" dt property.
* clarify the need for spi-nor compatibles in dt-bindings
SPI NOR manufacturer driver changes:
* Spansion:
- Add support for S28HS02GT
- Switch methods to use vreg_offset from SFDP instead of hardcoding
the register value
* Microchip/SST:
- Add support for sst26vf032b flash
* Winbond:
- Correct flags for Winbond w25q128
* NXP spifi:
- Use helper function devm_clk_get_enabled()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmTstY0ACgkQJWrqGEe9
VoRpeggAmiUPLVEJRosvtOAaT+en2YTDiVZrRmQ8hjekjRc4FfY6C7DPNWNua3zx
SaVqLEF7ScjnKH1YYwXN3XG3j4+1NPRV/VmR89yD6NVOcLs8BEJk/Ooc6LQrHAAf
E87jVafbPLWq8MkcVcnHbdijgHVh2onMbUQtkqjFSn6WAolSmZFJotocfKT12uuY
K9Hn5TLjRiH5e7O1rQnBcATMXjHIA1o0G1RCklm+T1MojNXIO1KN8yMYRjUoGbEJ
afFdwczNiTFgL4MJ3qL6NhqhSGC6V6QsUcsYvEjmComepAuZBP2wGnuQMHOxKqYV
Tl93LW8FOdyWHdCSgJdYkctoRPU6KQ==
=uMXQ
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"Core MTD changes:
- Use refcount to prevent corruption
- Call external _get and _put in right order
- Fix use-after-free in mtd release
- Explicitly include correct DT includes
- Clean refcounting with MTD_PARTITIONED_MASTER
- mtdblock: make warning messages ratelimited
- dt-bindings: Add SEAMA partition bindings
Device driver changes:
- Use devm helper functions
- Fix questionable cast, remove pointless ones.
- error handling fixes
- add support for new chip versions
- update DT bindings
- misc cleanups - fix typos, whitespace, indentation"
* tag 'mtd/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (105 commits)
dt-bindings: mtd: amlogic,meson-nand: drop unneeded quotes
mtd: spear_smi: Use helper function devm_clk_get_enabled()
mtd: rawnand: orion: Use helper function devm_clk_get_optional_enabled()
mtd: rawnand: vf610_nfc: Use helper function devm_clk_get_enabled()
mtd: rawnand: sunxi: Use helper function devm_clk_get_enabled()
mtd: rawnand: stm32_fmc2: Use helper function devm_clk_get_enabled()
mtd: rawnand: mtk: Use helper function devm_clk_get_enabled()
mtd: rawnand: mpc5121: Use helper function devm_clk_get_enabled()
mtd: rawnand: lpc32xx_slc: Use helper function devm_clk_get_enabled()
mtd: rawnand: intel: Use helper function devm_clk_get_enabled()
mtd: rawnand: fsmc: Use helper function devm_clk_get_enabled()
mtd: rawnand: arasan: Use helper function devm_clk_get_enabled()
mtd: rawnand: qcom: Add read/read_start ops in exec_op path
mtd: rawnand: qcom: Clear buf_count and buf_start in raw read
mtd: maps: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()
mtd: rawnand: Propagate error and simplify ternary operators for brcmstb_nand_wait_for_completion()
mtd: rawnand: qcom: Sort includes alphabetically
mtd: rawnand: qcom: Do not override the error no of submit_descs()
...
Disable virtualization features on 82580 just as on i210/i211.
This avoids that virt functions are acidentally called on 82850.
Fixes: 55cac248caa4 ("igb: Add full support for 82580 devices")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this cycle, we don't have a highlighted feature enhancement, but mostly
have fixed issues mainly in two parts: 1) zoned block device, 2) compression
support. For zoned block device, we've tried to improve the power-off recovery
flow as much as possible. For compression, we found some corner cases caused by
wrong compression policy and logics. Other than them, there were some reverts
and stat corrections.
Bug fix:
- use finish zone command when closing a zone
- check zone type before sending async reset zone command
- fix to assign compress_level for lz4 correctly
- fix error path of f2fs_submit_page_read()
- don't {,de}compress non-full cluster
- send small discard commands during checkpoint back
- flush inode if atomic file is aborted
- correct to account gc/cp stats
And, there are minor bug fixes, avoiding false lockdep warning, and clean-ups.
-----BEGIN PGP SIGNATURE-----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=Qa8+
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6-6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we don't have a highlighted feature enhancement, but
mostly have fixed issues mainly in two parts: 1) zoned block device,
and 2) compression support.
For zoned block device, we've tried to improve the power-off recovery
flow as much as possible. For compression, we found some corner cases
caused by wrong compression policy and logics. Other than them, there
were some reverts and stat corrections.
Bug fixes:
- use finish zone command when closing a zone
- check zone type before sending async reset zone command
- fix to assign compress_level for lz4 correctly
- fix error path of f2fs_submit_page_read()
- don't {,de}compress non-full cluster
- send small discard commands during checkpoint back
- flush inode if atomic file is aborted
- correct to account gc/cp stats
And, there are minor bug fixes, avoiding false lockdep warning, and
clean-ups"
* tag 'f2fs-for-6-6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (25 commits)
f2fs: use finish zone command when closing a zone
f2fs: compress: fix to assign compress_level for lz4 correctly
f2fs: fix error path of f2fs_submit_page_read()
f2fs: clean up error handling in sanity_check_{compress_,}inode()
f2fs: avoid false alarm of circular locking
Revert "f2fs: do not issue small discard commands during checkpoint"
f2fs: doc: fix description of max_small_discards
f2fs: should update REQ_TIME for direct write
f2fs: fix to account cp stats correctly
f2fs: fix to account gc stats correctly
f2fs: remove unneeded check condition in __f2fs_setxattr()
f2fs: fix to update i_ctime in __f2fs_setxattr()
Revert "f2fs: fix to do sanity check on extent cache correctly"
f2fs: increase usage of folio_next_index() helper
f2fs: Only lfs mode is allowed with zoned block device feature
f2fs: check zone type before sending async reset zone command
f2fs: compress: don't {,de}compress non-full cluster
f2fs: allow f2fs_ioc_{,de}compress_file to be interrupted
f2fs: don't reopen the main block device in f2fs_scan_devices
f2fs: fix to avoid mmap vs set_compress_option case
...
Commit bde5f6bc68db ("kmemleak: add scheduling point to kmemleak_scan()")
added a cond_resched() call to the struct page scanning loop to prevent
soft lockup from happening. However, soft lockup can still happen in that
loop in some corner cases when the pages that satisfy the "!(pfn & 63)"
check are skipped for some reasons.
Fix this corner case by moving up the cond_resched() check so that it will
be called every 64 pages unconditionally.
Link: https://lkml.kernel.org/r/20230825164947.1317981-1-longman@redhat.com
Fixes: bde5f6bc68db ("kmemleak: add scheduling point to kmemleak_scan()")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the past, movable allocations could be disallowed from CMA through
PF_MEMALLOC_PIN. As CMA pages are funneled through the MOVABLE pcplist,
this required filtering that cornercase during allocations, such that
pinnable allocations wouldn't accidentally get a CMA page.
However, since 8e3560d963d2 ("mm: honor PF_MEMALLOC_PIN for all movable
pages"), PF_MEMALLOC_PIN automatically excludes __GFP_MOVABLE. Once
again, MOVABLE implies CMA is allowed.
Remove the stale filtering code. Also remove a stale comment that was
introduced as part of the filtering code, because the filtering let
order-0 pages fall through to the buddy allocator. See 1d91df85f399
("mm/page_alloc: handle a missing case for memalloc_nocma_{save/restore}
APIs") for context. The comment's been obsolete since the introduction of
the explicit ALLOC_HIGHATOMIC flag in eb2e2b425c69 ("mm/page_alloc:
explicitly record high-order atomic allocations in alloc_flags").
Link: https://lkml.kernel.org/r/20230824153821.243148-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With madvise and prctl KSM can be enabled for different VMA's. Once it is
enabled we can query how effective KSM is overall. However we cannot
easily query if an individual VMA benefits from KSM.
This commit adds a KSM section to the /prod/<pid>/smaps file. It reports
how many of the pages are KSM pages. Note that KSM-placed zeropages are
not included, only actual KSM pages.
Here is a typical output:
7f420a000000-7f421a000000 rw-p 00000000 00:00 0
Size: 262144 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 51212 kB
Pss: 8276 kB
Shared_Clean: 172 kB
Shared_Dirty: 42996 kB
Private_Clean: 196 kB
Private_Dirty: 7848 kB
Referenced: 15388 kB
Anonymous: 51212 kB
KSM: 41376 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 202016 kB
SwapPss: 3882 kB
Locked: 0 kB
THPeligible: 0
ProtectionKey: 0
ksm_state: 0
ksm_skip_base: 0
ksm_skip_count: 0
VmFlags: rd wr mr mw me nr mg anon
This information also helps with the following workflow:
- First enable KSM for all the VMA's of a process with prctl.
- Then analyze with the above smaps report which VMA's benefit the most
- Change the application (if possible) to add the corresponding madvise
calls for the VMA's that benefit the most
[shr@devkernel.io: v5]
Link: https://lkml.kernel.org/r/20230823170107.1457915-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230822180539.1424843-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the discussion of "Improve hugetlbfs read on HWPOISON hugepages" [1],
Matthew Wilcox suggests hwp is a bad abbreviation of hwpoison, as hwp is
already used as "an acronym by acpi, intel_pstate, some clock drivers, an
ethernet driver, and a scsi driver"[1].
So rename hwp_walk and hwp_walk_ops to hwpoison_walk and
hwpoison_walk_ops respectively.
raw_hwp_(page|list), *_raw_hwp, and raw_hwp_unreliable flag are other
major appearances of "hwp". However, given the "raw" hint in the name, it
is easy to differentiate them from other "hwp" acronyms. Since renaming
them is not as straightforward as renaming hwp_walk*, they are not covered
by this commit.
[1] https://lore.kernel.org/lkml/20230707201904.953262-5-jiaqiyan@google.com/T/#me6fecb8ce1ad4d5769199c9e162a44bc88f7bdec
Link: https://lkml.kernel.org/r/20230713235553.4121855-1-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Memory failure is not interested in logically offlined pages. Skip this
type of page.
Link: https://lkml.kernel.org/r/20230727115643.639741-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- kprobes: use struct_size() for variable size kretprobe_instance
data structure.
- eprobe: Simplify trace_eprobe list iteration.
- probe events: Data structure field access support on BTF argument.
. Update BTF argument support on the functions in the kernel loadable
modules (only loaded modules are supported).
. Move generic BTF access function (search function prototype and get
function parameters) to a separated file.
. Add a function to search a member of data structure in BTF.
. Support accessing BTF data structure member from probe args by
C-like arrow('->') and dot('.') operators. e.g.
't sched_switch next=next->pid vruntime=next->se.vruntime'
. Support accessing BTF data structure member from $retval. e.g.
'f getname_flags%return +0($retval->name):string'
. Add string type checking if BTF type info is available.
This will reject if user specify ":string" type for non "char
pointer" type.
. Automatically assume the fprobe event as a function return event
if $retval is used.
- selftests/ftrace: Add BTF data field access test cases.
- Documentation: Update fprobe event example with BTF data field.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmTycQkbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bqS8H/jeR1JhOzIXOvTw7XCFm
MrSY/SKi8tQfV6lau2UmoYdbYvYjpqL34XLOQPNf2/lrcL2M9aNYXk9fbhlW8enx
vkMyKQ0E5anixkF4vsTbEl9DaprxbpsPVACmZ/7VjQk2JuXIdyaNk8hno9LgIcEq
udztb0o2HmDFqAXfRi0LvlSTAIwvXZ+usmEvYpaq1g2WwrCe7NHEYl42vMpj+h4H
9l4t5rA9JyPPX4yQUjtKGW5eRVTwDTm/Gn6DRzYfYzkkiBZv27qfovzBOt672LgG
hyot+u7XeKvZx3jjnF7+mRWoH/m0dqyhyi/nPhpIE09VhgwclrbGAcDuR1x6sp01
PHY=
=hBDN
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: use struct_size() for variable size kretprobe_instance data
structure.
- eprobe: Simplify trace_eprobe list iteration.
- probe events: Data structure field access support on BTF argument.
- Update BTF argument support on the functions in the kernel
loadable modules (only loaded modules are supported).
- Move generic BTF access function (search function prototype and
get function parameters) to a separated file.
- Add a function to search a member of data structure in BTF.
- Support accessing BTF data structure member from probe args by
C-like arrow('->') and dot('.') operators. e.g.
't sched_switch next=next->pid vruntime=next->se.vruntime'
- Support accessing BTF data structure member from $retval. e.g.
'f getname_flags%return +0($retval->name):string'
- Add string type checking if BTF type info is available. This will
reject if user specify ":string" type for non "char pointer"
type.
- Automatically assume the fprobe event as a function return event
if $retval is used.
- selftests/ftrace: Add BTF data field access test cases.
- Documentation: Update fprobe event example with BTF data field.
* tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Update fprobe event example with BTF field
selftests/ftrace: Add BTF fields access testcases
tracing/fprobe-event: Assume fprobe is a return event by $retval
tracing/probes: Add string type check with BTF
tracing/probes: Support BTF field access from $retval
tracing/probes: Support BTF based data structure field access
tracing/probes: Add a function to search a member of a struct/union
tracing/probes: Move finding func-proto API and getting func-param API to trace_btf
tracing/probes: Support BTF argument on module functions
tracing/eprobe: Iterate trace_eprobe directly
kernel: kprobes: Use struct_size()
- Replace strlcpy() with strscpy()
- Initialize the pipe cpumask to zero on allocation
- Use within_module() instead of open coding it
- Remove extra space in hwlat_detectory/mode output
- Use LIST_HEAD() instead of open coding it
- A bunch of clean ups and fixes for the cpumask filter
- Set local da_mon_##name to static
- Fix race in snapshot buffer between cpu write and swap
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZPMsBhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiToAP49yXVK6seGUwU18QSp4mCNa0QNSH0v
bl2UYVSCPv8aNQEAquDOvGInbMcT2z69lK359TVlGPrtVjhqFDloSLMYgAo=
=DTGo
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
"Tracing fixes and clean ups:
- Replace strlcpy() with strscpy()
- Initialize the pipe cpumask to zero on allocation
- Use within_module() instead of open coding it
- Remove extra space in hwlat_detectory/mode output
- Use LIST_HEAD() instead of open coding it
- A bunch of clean ups and fixes for the cpumask filter
- Set local da_mon_##name to static
- Fix race in snapshot buffer between cpu write and swap"
* tag 'trace-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/filters: Fix coding style issues
tracing/filters: Change parse_pred() cpulist ternary into an if block
tracing/filters: Fix double-free of struct filter_pred.mask
tracing/filters: Fix error-handling of cpulist parsing buffer
tracing: Zero the pipe cpumask on alloc to avoid spurious -EBUSY
ftrace: Use LIST_HEAD to initialize clear_hash
ftrace: Use within_module to check rec->ip within specified module.
tracing: Replace strlcpy with strscpy in trace/events/task.h
tracing: Fix race issue between cpu buffer write and swap
tracing: Remove extra space at the end of hwlat_detector/mode
rv: Set variable 'da_mon_##name' to static
x86 self-test code.
[ Arguably the existing code was unnecessarily fragile, and
tooling should have picked up the new syscall number,
and a wider fix is being worked on - but meanwhile, let's
not have the old syscall number in the kernel tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=W86M
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 selftest fix from Ingo Molnar:
"Fix the __NR_map_shadow_stack syscall-renumbering fallout in the x86
self-test code.
[ Arguably the existing code was unnecessarily fragile, and tooling
should have picked up the new syscall number, and a wider fix is
being worked on - but meanwhile, let's not have the old syscall
number in the kernel tree. ]"
* tag 'x86-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86: Update map_shadow_stack syscall nr
kernels, caused by a buggy factoring-out of existing code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zpfn
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix false positive 'softirq work is pending' messages on -rt kernels,
caused by a buggy factoring-out of existing code"
* tag 'timers-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/rcu: Fix false positive "softirq work is pending" messages
and controls a CPU hot-unplug operation vs. the CFS bandwidth timer.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wM0O
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
"Fix a CPU hotplug related deadlock between the task which initiates
and controls a CPU hot-unplug operation vs. the CFS bandwidth timer"
* tag 'smp-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Prevent self deadlock on CPU hot-unplug
and a kernel-doc fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jDS4
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Miscellaneous scheduler fixes: a reporting fix, a static symbol fix,
and a kernel-doc fix"
* tag 'sched-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Report correct state for TASK_IDLE | TASK_FREEZABLE
sched/fair: Make update_entity_lag() static
sched/core: Add kernel-doc for set_cpus_allowed_ptr()
Mikhail reports early-6.6-based Fedora Rawhide not booting: "rcu_preempt
detected expedited stalls", minutes wait, and then hung_task splat while
kworker trying to synchronize_rcu_expedited(). Nothing logged to disk.
He bisected to my 6.6 a349d72fd9ef ("mm/pgtable: add rcu_read_lock() and
rcu_read_unlock()s"): but the one to blame is my 6.5 commit to fix the
espfix "bad pmd" warnings when booting x86_64 with CONFIG_EFI_PGT_DUMP=y.
Gaah, that added an "addr >= TASK_SIZE" check to avoid pte_offset_map(),
but failed to add the equivalent check when choosing to pte_unmap().
It's not a problem on 6.5 (for different reasons, it's harmless on both
64-bit and 32-bit), but becomes a bootstopper on 6.6 with the unbalanced
rcu_read_unlock() - RCU has a WARN_ON_ONCE for that, but it would have
scrolled off Mikhail's console too quickly.
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/linux-mm/CABXGCsNi8Tiv5zUPNXr6UJw6qV1VdaBEfGqEAMkkXE3QPvZuAQ@mail.gmail.com/
Fixes: 8b1cb4a2e819 ("mm/pagewalk: fix EFI_PGT_DUMP of espfix area")
Fixes: a349d72fd9ef ("mm/pgtable: add rcu_read_lock() and rcu_read_unlock()s")
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudip Mukherjee reports that the mips sb1250_swarm_defconfig build fails
with the current kernel. It isn't actually MIPS-specific, it's just
that that defconfig does not have CGROUP_SCHED enabled like most configs
do, and as such shows this error:
kernel/cgroup/cgroup.c: In function 'cgroup_local_stat_show':
kernel/cgroup/cgroup.c:3699:15: error: implicit declaration of function 'cgroup_tryget_css'; did you mean 'cgroup_tryget'? [-Werror=implicit-function-declaration]
3699 | css = cgroup_tryget_css(cgrp, ss);
| ^~~~~~~~~~~~~~~~~
| cgroup_tryget
kernel/cgroup/cgroup.c:3699:13: warning: assignment to 'struct cgroup_subsys_state *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
3699 | css = cgroup_tryget_css(cgrp, ss);
| ^
because cgroup_tryget_css() only exists when CGROUP_SCHED is enabled,
and the cgroup_local_stat_show() function should similarly be guarded by
that config option.
Move things around a bit to fix this all.
Fixes: d1d4ff5d11a5 ("cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the typo which resulted in the driver using FB_DEFAULT_IOMEM_HELPERS
instead of FB_DEFAULT_IOMEM_OPS as the fbdev I/O helpers.
Fixes: 501126083855 ("fbdev/g364fb: Use fbdev I/O helpers")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
