IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
QoS Data Frames that were sent with a No Ack policy should be ignored by
the minstrel statistics. There will never be an Ack for these frames so
there is no way to draw conclusions about the success of the transmission.
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
Link: https://lore.kernel.org/r/20210517120145.132814-1-borgers@mi.fu-berlin.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The "ap_info->tbtt_info_len" and "length" variables are the same value
but it is confusing how the names are mixed up. Let's use "length"
everywhere for consistency.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YJaMNzZENkYFAYQX@mwanda
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We no longer need to put any limits here, hardware will and
mac80211-hwsim can do whatever it likes. The reason we had
this was some accounting code (still mentioned in the comment)
but that code was deleted in commit c781944b71f8 ("cfg80211:
Remove unused cfg80211_can_use_iftype_chan()").
Link: https://lore.kernel.org/r/20210506221159.d1d61db1d31c.Iac4da68d54b9f1fdc18a03586bbe06aeb9515425@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Variable 'ret' is set to -ENODEV but this value is never read as it
is overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Clean up the following clang-analyzer warning:
net/mac80211/debugfs_netdev.c:60:2: warning: Value stored to 'ret' is
never read [clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619774483-116805-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Variable 'ps' is set to wdev->ps but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
net/wireless/wext-compat.c:1170:7: warning: Value stored to 'ps' during
its initialization is never read [clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619603945-116891-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix the following out-of-bounds warning:
net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &threshold.low and &spydata->spy_thr_low. As
these are just a couple of struct members, fix this by using direct
assignments, instead of memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pablo Neira Ayuso says
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Nicolas Dichtel updates MAINTAINERS file to add Netfilter IRC channel.
2) Skip non-IPv6 packets in nft_exthdr.
3) Skip non-TCP packets in nft_osf.
4) Skip non-TCP/UDP packets in nft_tproxy.
5) Memleak in hardware offload infrastructure when counters are used
for first time in a rule.
6) The VLAN transfer routine must use FLOW_DISSECTOR_KEY_BASIC instead
of FLOW_DISSECTOR_KEY_CONTROL. Moreover, make a more robust check
for 802.1q and 802.1ad to restore simple matching on transport
protocols.
7) Fix bogus EPERM when listing a ruleset when table ownership flag
is set on.
8) Honor table ownership flag when table is referenced by handle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The inner_ipproto saves the inner IP protocol of the plain
text packet. This allows vendor's IPsec feature making offload
decision at skb's features_check and configuring hardware at
ndo_start_xmit.
For example, ConnectX6-DX IPsec device needs the plaintext's
IP protocol to support partial checksum offload on
VXLAN/GENEVE packet over IPsec transport mode tunnel.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The current cleanup rbuf tries a bit too hard to avoid acquiring
the subflow socket lock. We may end-up delaying the needed ack,
or skip acking a blocked subflow.
Address the above extending the conditions used to trigger the cleanup
to reflect more closely what TCP does and invoking tcp_cleanup_rbuf()
on all the active subflows.
Note that we can't replicate the exact tests implemented in
tcp_cleanup_rbuf(), as MPTCP lacks some of the required info - e.g.
ping-pong mode.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new flag named deny_join_id0 in struct
mptcp_options_received. Set it when MP_CAPABLE with the flag
MPTCP_CAP_DENYJOIN_ID0 is received.
Also add a new flag remote_deny_join_id0 in struct mptcp_pm_data. When the
flag deny_join_id0 is set, set this remote_deny_join_id0 flag.
In mptcp_pm_create_subflow_or_signal_addr, if the remote_deny_join_id0 flag
is set, and the remote address id is zero, stop this connection.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch defined a new flag MPTCP_CAP_DENY_JOIN_ID0 for the third bit,
labeled "C" of the MP_CAPABLE option.
Add a new flag allow_join_id0 in struct mptcp_out_options. If this flag is
set, send out the MP_CAPABLE option with the flag MPTCP_CAP_DENY_JOIN_ID0.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new sysctl, named allow_join_initial_addr_port, to
control whether allow peers to send join requests to the IP address and
port number used by the initial subflow.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, sctp over udp was using udp tunnel's icmp err process, which
only does sk lookup on sctp side. However for sctp's icmp error process,
there are more things to do, like syncing assoc pmtu/retransmit packets
for toobig type err, and starting proto_unreach_timer for unreach type
err etc.
Now after adding PLPMTUD, which also requires to process toobig type err
on sctp side. This patch is to process icmp err on sctp side by parsing
the type/code/info in .encap_err_lookup and call sctp's icmp processing
functions. Note as the 'redirect' err process needs to know the outer
ip(v6) header's, we have to leave it to udp(v6)_err to handle it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to extract sctp_v4_err_handle() from sctp_v4_err() to
only handle the icmp err after the sock lookup, and it also makes
the code clearer.
sctp_v4_err_handle() will be used in sctp over udp's err handling
in the following patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to extract sctp_v6_err_handle() from sctp_v6_err() to
only handle the icmp err after the sock lookup, and it also makes
the code clearer.
sctp_v6_err_handle() will be used in sctp over udp's err handling
in the following patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as in tcp_v6_err() and __udp6_lib_err(), there's no need to
hold idev in sctp_v6_err(), so just call __in6_dev_get() instead.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_transport_pl_reset() is called whenever any of these 3 members in
transport is changed:
- probe_interval
- param_flags & SPP_PMTUD_ENABLE
- state == ACTIVE
If all are true, start the PLPMTUD when it's not yet started. If any of
these is false, stop the PLPMTUD when it's already running.
sctp_transport_pl_update() is called when the transport dst has changed.
It will restart the PLPMTUD probe. Again, the pathmtu won't change but
use the dst's mtu until the Search phase is done.
Note that after using PLPMTUD, the pathmtu is only initialized with the
dst mtu when the transport dst changes. At other time it is updated by
pl.pmtu. So sctp_transport_pmtu_check() will be called only when PLPMTUD
is disabled in sctp_packet_config().
After this patch, the PLPMTUD feature from RFC8899 will be activated
and can be used by users.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PLPMTUD will short-circuit the old process for icmp TOOBIG packets.
This part is described in rfc8899#section-4.6.2 (PL_PTB_SIZE =
PTB_SIZE - other_headers_len). Note that from rfc8899#section-5.2
State Machine, each case below is for some specific states only:
a) PL_PTB_SIZE < MIN_PLPMTU || PL_PTB_SIZE >= PROBED_SIZE,
discard it, for any state
b) MIN_PLPMTU < PL_PTB_SIZE < BASE_PLPMTU,
Base -> Error, for Base state
c) BASE_PLPMTU <= PL_PTB_SIZE < PLPMTU,
Search -> Base or Complete -> Base, for Search and Complete states.
d) PLPMTU < PL_PTB_SIZE < PROBED_SIZE,
set pl.probe_size to PL_PTB_SIZE then verify it, for Search state.
The most important one is case d), which will help find the optimal
fast during searching. Like when pathmtu = 1392 for SCTP over IPv4,
the search will be (20 is iphdr_len):
1. probe with 1200 - 20
2. probe with 1232 - 20
3. probe with 1264 - 20
...
7. probe with 1388 - 20
8. probe with 1420 - 20
When sending the probe with 1420 - 20, TOOBIG may come with PL_PTB_SIZE =
1392 - 20. Then it matches case d), and saves some rounds to try with the
1392 - 20 probe. But of course, PLPMTUD doesn't trust TOOBIG packets, and
it will go back to the common searching once the probe with the new size
can't be verified.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As described in rfc8899#section-5.2, when a probe succeeds, there might
be the following state transitions:
- Base -> Search, occurs when probe succeeds with BASE_PLPMTU,
pl.pmtu is not changing,
pl.probe_size increases by SCTP_PL_BIG_STEP,
- Error -> Search, occurs when probe succeeds with BASE_PLPMTU,
pl.pmtu is changed from SCTP_MIN_PLPMTU to SCTP_BASE_PLPMTU,
pl.probe_size increases by SCTP_PL_BIG_STEP.
- Search -> Search Complete, occurs when probe succeeds with the probe
size SCTP_MAX_PLPMTU less than pl.probe_high,
pl.pmtu is not changing, but update *pathmtu* with it,
pl.probe_size is set back to pl.pmtu to double check it.
- Search Complete -> Search, occurs when probe succeeds with the probe
size equal to pl.pmtu,
pl.pmtu is not changing,
pl.probe_size increases by SCTP_PL_MIN_STEP.
So search process can be described as:
1. When it just enters 'Search' state, *pathmtu* is not updated with
pl.pmtu, and probe_size increases by a big step (SCTP_PL_BIG_STEP)
each round.
2. Until pl.probe_high is set when a probe fails, and probe_size
decreases back to pl.pmtu, as described in the last patch.
3. When the probe with the new size succeeds, probe_size changes to
increase by a small step (SCTP_PL_MIN_STEP) due to pl.probe_high
is set.
4. Until probe_size is next to pl.probe_high, the searching finishes and
it goes to 'Complete' state and updates *pathmtu* with pl.pmtu, and
then probe_size is set to pl.pmtu to confirm by once more probe.
5. This probe occurs after "30 * probe_inteval", a much longer time than
that in Search state. Once it is done it goes to 'Search' state again
with probe_size increased by SCTP_PL_MIN_STEP.
As we can see above, during the searching, pl.pmtu changes while *pathmtu*
doesn't. *pathmtu* is only updated when the search finishes by which it
gets an optimal value for it. A big step is used at the beginning until
it gets close to the optimal value, then it changes to a small step until
it has this optimal value.
The small step is also used in 'Complete' until it goes to 'Search' state
again and the probe with 'pmtu + the small step' succeeds, which means a
higher size could be used. Then probe_size changes to increase by a big
step again until it gets close to the next optimal value.
Note that anytime when black hole is detected, it goes directly to 'Base'
state with pl.pmtu set to SCTP_BASE_PLPMTU, as described in the last patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The state transition is described in rfc8899#section-5.2,
PROBE_COUNT == MAX_PROBES means the probe fails for MAX times, and the
state transition includes:
- Base -> Error, occurs when BASE_PLPMTU Confirmation Fails,
pl.pmtu is set to SCTP_MIN_PLPMTU,
probe_size is still SCTP_BASE_PLPMTU;
- Search -> Base, occurs when Black Hole Detected,
pl.pmtu is set to SCTP_BASE_PLPMTU,
probe_size is set back to SCTP_BASE_PLPMTU;
- Search Complete -> Base, occurs when Black Hole Detected
pl.pmtu is set to SCTP_BASE_PLPMTU,
probe_size is set back to SCTP_BASE_PLPMTU;
Note a black hole is encountered when a sender is unaware that packets
are not being delivered to the destination endpoint. So it includes the
probe failures with equal probe_size to pl.pmtu, and definitely not
include that with greater probe_size than pl.pmtu. The later one is the
normal probe failure where probe_size should decrease back to pl.pmtu
and pl.probe_high is set. pl.probe_high would be used on HB ACK recv
path in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch does exactly what rfc8899#section-6.2.1.2 says:
The SCTP sender needs to be able to determine the total size of a
probe packet. The HEARTBEAT chunk could carry a Heartbeat
Information parameter that includes, besides the information
suggested in [RFC4960], the probe size to help an implementation
associate a HEARTBEAT ACK with the size of probe that was sent. The
sender could also use other methods, such as sending a nonce and
verifying the information returned also contains the corresponding
nonce. The length of the PAD chunk is computed by reducing the
probing size by the size of the SCTP common header and the HEARTBEAT
chunk.
Note that HB ACK chunk will carry back whatever HB chunk carried, including
the probe_size we put it in; We also check hbinfo->probe_size in the HB ACK
against link->pl.probe_size to validate this HB ACK chunk.
v1->v2:
- Remove the unused 'sp' and add static for sctp_packet_bundle_pad().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are 3 timers described in rfc8899#section-5.1.1:
PROBE_TIMER, PMTU_RAISE_TIMER, CONFIRMATION_TIMER
This patches adds a 'probe_timer' in transport, and it works as either
PROBE_TIMER or PMTU_RAISE_TIMER. At most time, it works as PROBE_TIMER
and expires every a 'probe_interval' time to send the HB probe packet.
When transport pl enters COMPLETE state, it works as PMTU_RAISE_TIMER
and expires in 'probe_interval * 30' time to go back to SEARCH state
and do searching again.
SCTP HB is an acknowledged packet, CONFIRMATION_TIMER is not needed.
The timer will start when transport pl enters BASE state and stop
when it enters DISABLED state.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With this socket option, users can change probe_interval for
a transport, asoc or sock after it's created.
Note that if the change is for an asoc, also apply the change
to each transport in this asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'.
'n' is the interval for PLPMTUD probe timer in milliseconds, and it
can't be less than 5000 if it's not 0.
All asoc/transport's PLPMTUD in a new socket will be enabled by default.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This chunk is defined in rfc4820#section-3, and used to pad an
SCTP packet. The receiver must discard this chunk and continue
processing the rest of the chunks in the packet.
Add it now, as it will be bundled with a heartbeat chunk to probe
pmtu in the following patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes openvswitch module use the event tracing framework
to log the upcall interface and action execution pipeline. When
using openvswitch as the packet forwarding engine, some types of
debugging are made possible simply by using the ovs-vswitchd's
ofproto/trace command. However, such a command has some
limitations:
1. When trying to trace packets that go through the CT action,
the state of the packet can't be determined, and probably
would be potentially wrong.
2. Deducing problem packets can sometimes be difficult as well
even if many of the flows are known
3. It's possible to use the openvswitch module even without
the ovs-vswitchd (although, not common use).
Introduce the event tracing points here to make it possible for
working through these problems in kernel space. The style is
copied from the mac80211 driver-trace / trace code for
consistency - this creates some checkpatch splats, but the
official 'guide' for adding tracepoints, as well as the existing
examples all add the same splats so it seems acceptable.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate the offset to read from module EEPROM as part of the netlink
policy and remove the corresponding check from the code.
This also makes it possible to query the offset range from user space:
$ genl ctrl policy name ethtool
...
ID: 0x14 policy[32]:attr[2]: type=U32 range:[0,255]
...
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate the number of bytes to read from the module EEPROM as part of
the netlink policy and remove the corresponding check from the code.
This also makes it possible to query the length range from user space:
$ genl ctrl policy name ethtool
...
ID: 0x14 policy[32]:attr[3]: type=U32 range:[1,128]
...
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'ETHTOOL_A_MODULE_EEPROM_DATA' attribute is not part of the get
request.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return statements are not needed in Void function.
Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing source address validation, the flowi4 struct used for
fib_lookup should be in the reverse direction to the given skb.
fl4_dport and fl4_sport returned by fib4_rules_early_flow_dissect
should thus be swapped.
Fixes: 5a847a6e1477 ("net/ipv4: Initialize proto and ports in flow struct")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 6c11fbf97e69 ("ip6_tunnel: add MPLS transmit support")
moved assiging inner_ipproto down from ipxip6_tnl_xmit() to
its callee ip6_tnl_xmit(). The latter is also used by GRE.
Since commit 38720352412a ("gre: Use inner_proto to obtain inner
header protocol") GRE had been depending on skb->inner_protocol
during segmentation. It sets it in gre_build_header() and reads
it in gre_gso_segment(). Changes to ip6_tnl_xmit() overwrite
the protocol, resulting in GSO skbs getting dropped.
Note that inner_protocol is a union with inner_ipproto,
GRE uses the former while the change switched it to the latter
(always setting it to just IPPROTO_GRE).
Restore the original location of skb_set_inner_ipproto(),
it is unclear why it was moved in the first place.
Fixes: 6c11fbf97e69 ("ip6_tunnel: add MPLS transmit support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 7896248983ef ("mptcp: add skeleton to sync msk socket
options to subflows") introduced a duplicate declaration of
mptcp_setsockopt(), just drop it.
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 7896248983ef ("mptcp: add skeleton to sync msk socket options to subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk socket state is currently updated in a few spots without
owning the msk socket lock itself.
Some of such operations are safe, as they happens before exposing
the msk socket to user-space and can't race with other changes.
A couple of them, at connect time, can actually race with close()
or shutdown(), leaving breaking the socket state machine.
This change addresses the issue moving such update under the msk
socket lock with the usual:
<acquire spinlock>
<check sk lock onwers>
<ev defer to release_cb>
scheme.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/56
Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect")
Fixes: c3c123d16c0e ("net: mptcp: don't hang in mptcp_sendmsg() after TCP fallback")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In 32-bit architecture, the result of sizeof() is a 32-bit integer so
the expression becomes the multiplication between 2 32-bit integer which
can potentially leads to integer overflow. As a result,
bpf_map_area_alloc() allocates less memory than needed.
Fix this by casting 1 operand to u64.
Fixes: 0d2c4f964050 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps")
Fixes: 99c51064fb06 ("devmap: Use bpf_map_area_alloc() for allocating hash buckets")
Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com
Account this exceptional events for better introspection.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we check the msk state to avoid enqueuing new
skbs at msk shutdown time.
Such test is racy - as we can't acquire the msk socket lock -
and useless, as the caller already checked the subflow
field 'disposable', covering the same scenario in a race
free manner - read and updated under the ssk socket lock.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we don't flush entirely the receive queue, we need set
again such bit later. We can simply avoid clearing it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a bunch of callsite where the ssk socket
lock is acquired using the full-blown version eligible for
the fast variant. Let's move to the latter.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned cache was introduced to reduce the number of skb
allocation in atomic context, but the required complexity is
excessive.
This change remove the mentioned cache.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nft_table_lookup_byhandle() also needs to validate the netlink PortID
owner when deleting a table by handle.
Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_table_lookup() allows us to obtain the table object by the name and
the family. The netlink portID validation needs to be skipped for the
dump path, since the ownership only applies to commands to update the
given table. Skip validation if the specified netlink PortID is zero
when calling nft_table_lookup().
Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In case of xfrm offload, if xdo_dev_state_add() of driver returns
-EOPNOTSUPP, xfrm offload fallback is failed.
In xfrm state_add() both xso->dev and xso->real_dev are initialized to
dev and when err(-EOPNOTSUPP) is returned only xso->dev is set to null.
So in this scenario the condition in func validate_xmit_xfrm(),
if ((x->xso.dev != dev) && (x->xso.real_dev == dev))
return skb;
returns true, due to which skb is returned without calling esp_xmit()
below which has fallback code. Hence the CRYPTO_FALLBACK is failing.
So fixing this with by keeping x->xso.real_dev as NULL when err is
returned in func xfrm_dev_state_add().
Fixes: bdfd2d1fa79a ("bonding/xfrm: use real_dev instead of slave_dev")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This reverts commit 0dca2c7404a938cb10c85d0515cee40ed5348788.
The commit in question breaks hardware offload of flower filters.
Quoting Vladimir Oltean <olteanv@gmail.com>:
fl_hw_replace_filter() and fl_reoffload() create a struct
flow_cls_offload with a rule->match.mask member derived from the mask
of the software classifier: &f->mask->key - that same mask that is used
for initializing the flow dissector keys, and the one from which Boris
removed the basic.n_proto member because it was bothering him.
Reported-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The client's sk_state will be set to TCP_ESTABLISHED if the server
replay the client's connect request.
However, if the client has pending signal, its sk_state will be set
to TCP_CLOSE without notify the server, so the server will hold the
corrupt connection.
client server
1. sk_state=TCP_SYN_SENT |
2. call ->connect() |
3. wait reply |
| 4. sk_state=TCP_ESTABLISHED
| 5. insert to connected list
| 6. reply to the client
7. sk_state=TCP_ESTABLISHED |
8. insert to connected list |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE |
client is exiting... |
11. call ->release() |
virtio_transport_close
if (!(sk->sk_state == TCP_ESTABLISHED ||
sk->sk_state == TCP_CLOSING))
return true; *return at here, the server cannot notice the connection is corrupt*
So the client should notify the peer in this case.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lkml.org/lkml/2021/5/17/418
Signed-off-by: lixianming <lixianming5@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify the pr_info content from int to char * in sock_register() and
sock_unregister(), this looks more readable.
Fixed build error in ARCH=sparc64.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementation of 32 bit DSN expansion is buggy.
After the previous patch, we can simply reuse the newly
introduced helper to do the expansion safely.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/120
Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving 32 bits DSS ack from the peer, the MPTCP need
to expand them to 64 bits value. The current code is buggy
WRT detecting 32 bits ack wrap-around: when the wrap-around
happens the current unsigned 32 bit ack value is lower than
the previous one.
Additionally check for possible reverse wrap and make the helper
visible, so that we could re-use it for the next patch.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/204
Fixes: cc9d25669866 ("mptcp: update per unacked sequence on pkt reception")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
