IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
An external fragmentation event was previously described as
When the page allocator fragments memory, it records the event using
the mm_page_alloc_extfrag event. If the fallback_order is smaller
than a pageblock order (order-9 on 64-bit x86) then it's considered
an event that will cause external fragmentation issues in the future.
The kernel reduces the probability of such events by increasing the
watermark sizes by calling set_recommended_min_free_kbytes early in the
lifetime of the system. This works reasonably well in general but if
there are enough sparsely populated pageblocks then the problem can still
occur as enough memory is free overall and kswapd stays asleep.
This patch introduces a watermark_boost_factor sysctl that allows a zone
watermark to be temporarily boosted when an external fragmentation causing
events occurs. The boosting will stall allocations that would decrease
free memory below the boosted low watermark and kswapd is woken if the
calling context allows to reclaim an amount of memory relative to the size
of the high watermark and the watermark_boost_factor until the boost is
cleared. When kswapd finishes, it wakes kcompactd at the pageblock order
to clean some of the pageblocks that may have been affected by the
fragmentation event. kswapd avoids any writeback, slab shrinkage and swap
from reclaim context during this operation to avoid excessive system
disruption in the name of fragmentation avoidance. Care is taken so that
kswapd will do normal reclaim work if the system is really low on memory.
This was evaluated using the same workloads as "mm, page_alloc: Spread
allocations across zones before introducing fragmentation".
1-socket Skylake machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 1 THP allocating thread
--------------------------------------
4.20-rc3 extfrag events < order 9: 804694
4.20-rc3+patch: 408912 (49% reduction)
4.20-rc3+patch1-4: 18421 (98% reduction)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-1 653.58 ( 0.00%) 652.71 ( 0.13%)
Amean fault-huge-1 0.00 ( 0.00%) 178.93 * -99.00%*
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-1 0.00 ( 0.00%) 5.12 ( 100.00%)
Note that external fragmentation causing events are massively reduced by
this path whether in comparison to the previous kernel or the vanilla
kernel. The fault latency for huge pages appears to be increased but that
is only because THP allocations were successful with the patch applied.
1-socket Skylake machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 291392
4.20-rc3+patch: 191187 (34% reduction)
4.20-rc3+patch1-4: 13464 (95% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Min fault-base-1 912.00 ( 0.00%) 905.00 ( 0.77%)
Min fault-huge-1 127.00 ( 0.00%) 135.00 ( -6.30%)
Amean fault-base-1 1467.55 ( 0.00%) 1481.67 ( -0.96%)
Amean fault-huge-1 1127.11 ( 0.00%) 1063.88 * 5.61%*
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-1 77.64 ( 0.00%) 83.46 ( 7.49%)
As before, massive reduction in external fragmentation events, some jitter
on latencies and an increase in THP allocation success rates.
2-socket Haswell machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 5 THP allocating threads
----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 215698
4.20-rc3+patch: 200210 (7% reduction)
4.20-rc3+patch1-4: 14263 (93% reduction)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-5 1346.45 ( 0.00%) 1306.87 ( 2.94%)
Amean fault-huge-5 3418.60 ( 0.00%) 1348.94 ( 60.54%)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-5 0.78 ( 0.00%) 7.91 ( 910.64%)
There is a 93% reduction in fragmentation causing events, there is a big
reduction in the huge page fault latency and allocation success rate is
higher.
2-socket Haswell machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 166352
4.20-rc3+patch: 147463 (11% reduction)
4.20-rc3+patch1-4: 11095 (93% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-5 6217.43 ( 0.00%) 7419.67 * -19.34%*
Amean fault-huge-5 3163.33 ( 0.00%) 3263.80 ( -3.18%)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-5 95.14 ( 0.00%) 87.98 ( -7.53%)
There is a large reduction in fragmentation events with some jitter around
the latencies and success rates. As before, the high THP allocation
success rate does mean the system is under a lot of pressure. However, as
the fragmentation events are reduced, it would be expected that the
long-term allocation success rate would be higher.
Link: http://lkml.kernel.org/r/20181123114528.28802-5-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparation patch that copies the GFP flag __GFP_KSWAPD_RECLAIM
into alloc_flags. This is a preparation patch only that avoids having to
pass gfp_mask through a long callchain in a future patch.
Note that the setting in the fast path happens in alloc_flags_nofragment()
and it may be claimed that this has nothing to do with ALLOC_NO_FRAGMENT.
That's true in this patch but is not true later so it's done now for
easier review to show where the flag needs to be recorded.
No functional change.
[mgorman@techsingularity.net: ALLOC_KSWAPD flag needs to be applied in the !CONFIG_ZONE_DMA32 case]
Link: http://lkml.kernel.org/r/20181126143503.GO23260@techsingularity.net
Link: http://lkml.kernel.org/r/20181123114528.28802-4-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparation patch only, no functional change.
Link: http://lkml.kernel.org/r/20181123114528.28802-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Fragmentation avoidance improvements", v5.
It has been noted before that fragmentation avoidance (aka
anti-fragmentation) is not perfect. Given sufficient time or an adverse
workload, memory gets fragmented and the long-term success of high-order
allocations degrades. This series defines an adverse workload, a definition
of external fragmentation events (including serious) ones and a series
that reduces the level of those fragmentation events.
The details of the workload and the consequences are described in more
detail in the changelogs. However, from patch 1, this is a high-level
summary of the adverse workload. The exact details are found in the
mmtests implementation.
The broad details of the workload are as follows;
1. Create an XFS filesystem (not specified in the configuration but done
as part of the testing for this patch)
2. Start 4 fio threads that write a number of 64K files inefficiently.
Inefficiently means that files are created on first access and not
created in advance (fio parameterr create_on_open=1) and fallocate
is not used (fallocate=none). With multiple IO issuers this creates
a mix of slab and page cache allocations over time. The total size
of the files is 150% physical memory so that the slabs and page cache
pages get mixed
3. Warm up a number of fio read-only threads accessing the same files
created in step 2. This part runs for the same length of time it
took to create the files. It'll fault back in old data and further
interleave slab and page cache allocations. As it's now low on
memory due to step 2, fragmentation occurs as pageblocks get
stolen.
4. While step 3 is still running, start a process that tries to allocate
75% of memory as huge pages with a number of threads. The number of
threads is based on a (NR_CPUS_SOCKET - NR_FIO_THREADS)/4 to avoid THP
threads contending with fio, any other threads or forcing cross-NUMA
scheduling. Note that the test has not been used on a machine with less
than 8 cores. The benchmark records whether huge pages were allocated
and what the fault latency was in microseconds
5. Measure the number of events potentially causing external fragmentation,
the fault latency and the huge page allocation success rate.
6. Cleanup
Overall the series reduces external fragmentation causing events by over 94%
on 1 and 2 socket machines, which in turn impacts high-order allocation
success rates over the long term. There are differences in latencies and
high-order allocation success rates. Latencies are a mixed bag as they
are vulnerable to exact system state and whether allocations succeeded
so they are treated as a secondary metric.
Patch 1 uses lower zones if they are populated and have free memory
instead of fragmenting a higher zone. It's special cased to
handle a Normal->DMA32 fallback with the reasons explained
in the changelog.
Patch 2-4 boosts watermarks temporarily when an external fragmentation
event occurs. kswapd wakes to reclaim a small amount of old memory
and then wakes kcompactd on completion to recover the system
slightly. This introduces some overhead in the slowpath. The level
of boosting can be tuned or disabled depending on the tolerance
for fragmentation vs allocation latency.
Patch 5 stalls some movable allocation requests to let kswapd from patch 4
make some progress. The duration of the stalls is very low but it
is possible to tune the system to avoid fragmentation events if
larger stalls can be tolerated.
The bulk of the improvement in fragmentation avoidance is from patches
1-4 but patch 5 can deal with a rare corner case and provides the option
of tuning a system for THP allocation success rates in exchange for
some stalls to control fragmentation.
This patch (of 5):
The page allocator zone lists are iterated based on the watermarks of each
zone which does not take anti-fragmentation into account. On x86, node 0
may have multiple zones while other nodes have one zone. A consequence is
that tasks running on node 0 may fragment ZONE_NORMAL even though
ZONE_DMA32 has plenty of free memory. This patch special cases the
allocator fast path such that it'll try an allocation from a lower local
zone before fragmenting a higher zone. In this case, stealing of
pageblocks or orders larger than a pageblock are still allowed in the fast
path as they are uninteresting from a fragmentation point of view.
This was evaluated using a benchmark designed to fragment memory before
attempting THP allocations. It's implemented in mmtests as the following
configurations
configs/config-global-dhp__workload_thpfioscale
configs/config-global-dhp__workload_thpfioscale-defrag
configs/config-global-dhp__workload_thpfioscale-madvhugepage
e.g. from mmtests
./run-mmtests.sh --run-monitor --config configs/config-global-dhp__workload_thpfioscale test-run-1
The broad details of the workload are as follows;
1. Create an XFS filesystem (not specified in the configuration but done
as part of the testing for this patch).
2. Start 4 fio threads that write a number of 64K files inefficiently.
Inefficiently means that files are created on first access and not
created in advance (fio parameter create_on_open=1) and fallocate
is not used (fallocate=none). With multiple IO issuers this creates
a mix of slab and page cache allocations over time. The total size
of the files is 150% physical memory so that the slabs and page cache
pages get mixed.
3. Warm up a number of fio read-only processes accessing the same files
created in step 2. This part runs for the same length of time it
took to create the files. It'll refault old data and further
interleave slab and page cache allocations. As it's now low on
memory due to step 2, fragmentation occurs as pageblocks get
stolen.
4. While step 3 is still running, start a process that tries to allocate
75% of memory as huge pages with a number of threads. The number of
threads is based on a (NR_CPUS_SOCKET - NR_FIO_THREADS)/4 to avoid THP
threads contending with fio, any other threads or forcing cross-NUMA
scheduling. Note that the test has not been used on a machine with less
than 8 cores. The benchmark records whether huge pages were allocated
and what the fault latency was in microseconds.
5. Measure the number of events potentially causing external fragmentation,
the fault latency and the huge page allocation success rate.
6. Cleanup the test files.
Note that due to the use of IO and page cache that this benchmark is not
suitable for running on large machines where the time to fragment memory
may be excessive. Also note that while this is one mix that generates
fragmentation that it's not the only mix that generates fragmentation.
Differences in workload that are more slab-intensive or whether SLUB is
used with high-order pages may yield different results.
When the page allocator fragments memory, it records the event using the
mm_page_alloc_extfrag ftrace event. If the fallback_order is smaller than
a pageblock order (order-9 on 64-bit x86) then it's considered to be an
"external fragmentation event" that may cause issues in the future.
Hence, the primary metric here is the number of external fragmentation
events that occur with order < 9. The secondary metric is allocation
latency and huge page allocation success rates but note that differences
in latencies and what the success rate also can affect the number of
external fragmentation event which is why it's a secondary metric.
1-socket Skylake machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 1 THP allocating thread
--------------------------------------
4.20-rc3 extfrag events < order 9: 804694
4.20-rc3+patch: 408912 (49% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Amean fault-base-1 662.92 ( 0.00%) 653.58 * 1.41%*
Amean fault-huge-1 0.00 ( 0.00%) 0.00 ( 0.00%)
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Percentage huge-1 0.00 ( 0.00%) 0.00 ( 0.00%)
Fault latencies are slightly reduced while allocation success rates remain
at zero as this configuration does not make any special effort to allocate
THP and fio is heavily active at the time and either filling memory or
keeping pages resident. However, a 49% reduction of serious fragmentation
events reduces the changes of external fragmentation being a problem in
the future.
Vlastimil asked during review for a breakdown of the allocation types
that are falling back.
vanilla
3816 MIGRATE_UNMOVABLE
800845 MIGRATE_MOVABLE
33 MIGRATE_UNRECLAIMABLE
patch
735 MIGRATE_UNMOVABLE
408135 MIGRATE_MOVABLE
42 MIGRATE_UNRECLAIMABLE
The majority of the fallbacks are due to movable allocations and this is
consistent for the workload throughout the series so will not be presented
again as the primary source of fallbacks are movable allocations.
Movable fallbacks are sometimes considered "ok" to fallback because they
can be migrated. The problem is that they can fill an
unmovable/reclaimable pageblock causing those allocations to fallback
later and polluting pageblocks with pages that cannot move. If there is a
movable fallback, it is pretty much guaranteed to affect an
unmovable/reclaimable pageblock and while it might not be enough to
actually cause a unmovable/reclaimable fallback in the future, we cannot
know that in advance so the patch takes the only option available to it.
Hence, it's important to control them. This point is also consistent
throughout the series and will not be repeated.
1-socket Skylake machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 291392
4.20-rc3+patch: 191187 (34% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Amean fault-base-1 1495.14 ( 0.00%) 1467.55 ( 1.85%)
Amean fault-huge-1 1098.48 ( 0.00%) 1127.11 ( -2.61%)
thpfioscale Percentage Faults Huge
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Percentage huge-1 78.57 ( 0.00%) 77.64 ( -1.18%)
Fragmentation events were reduced quite a bit although this is known
to be a little variable. The latencies and allocation success rates
are similar but they were already quite high.
2-socket Haswell machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 5 THP allocating threads
----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 215698
4.20-rc3+patch: 200210 (7% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Amean fault-base-5 1350.05 ( 0.00%) 1346.45 ( 0.27%)
Amean fault-huge-5 4181.01 ( 0.00%) 3418.60 ( 18.24%)
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Percentage huge-5 1.15 ( 0.00%) 0.78 ( -31.88%)
The reduction of external fragmentation events is slight and this is
partially due to the removal of __GFP_THISNODE in commit ac5b2c1891
("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings") as THP
allocations can now spill over to remote nodes instead of fragmenting
local memory.
2-socket Haswell machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 166352
4.20-rc3+patch: 147463 (11% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Amean fault-base-5 6138.97 ( 0.00%) 6217.43 ( -1.28%)
Amean fault-huge-5 2294.28 ( 0.00%) 3163.33 * -37.88%*
thpfioscale Percentage Faults Huge
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Percentage huge-5 96.82 ( 0.00%) 95.14 ( -1.74%)
There was a slight reduction in external fragmentation events although the
latencies were higher. The allocation success rate is high enough that
the system is struggling and there is quite a lot of parallel reclaim and
compaction activity. There is also a certain degree of luck on whether
processes start on node 0 or not for this patch but the relevance is
reduced later in the series.
Overall, the patch reduces the number of external fragmentation causing
events so the success of THP over long periods of time would be improved
for this adverse workload.
Link: http://lkml.kernel.org/r/20181123114528.28802-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Userspace should always be in charge of how to online memory and if memory
should be onlined automatically in the kernel. Let's drop the parameter
to overwrite this - XEN passes memhp_auto_online, just like add_memory(),
so we can directly use that instead internally.
Link: http://lkml.kernel.org/r/20181123123740.27652-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__memblock_free_early() is only used by the convenience wrappers, so
essentially we wrap a call to memblock_free() twice. Replace calls of
__memblock_free_early() with calls to memblock_free() and drop the former.
Link: http://lkml.kernel.org/r/20181125102940.GE28634@rapoport-lnx
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Wentao Wang <witallwang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are multiple places of freeing a page, they all do the same things
so a common function can be used to reduce code duplicate.
It also avoids bug fixed in one function but left in another.
Link: http://lkml.kernel.org/r/20181119134834.17765-3-aaron.lu@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Pawel Staszewski <pstaszewski@itcare.pl>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_frag_free() calls __free_pages_ok() to free the page back to Buddy.
This is OK for high order page, but for order-0 pages, it misses the
optimization opportunity of using Per-Cpu-Pages and can cause zone lock
contention when called frequently.
Pawel Staszewski recently shared his result of 'how Linux kernel handles
normal traffic'[1] and from perf data, Jesper Dangaard Brouer found the
lock contention comes from page allocator:
mlx5e_poll_tx_cq
|
--16.34%--napi_consume_skb
|
|--12.65%--__free_pages_ok
| |
| --11.86%--free_one_page
| |
| |--10.10%--queued_spin_lock_slowpath
| |
| --0.65%--_raw_spin_lock
|
|--1.55%--page_frag_free
|
--1.44%--skb_release_data
Jesper explained how it happened: mlx5 driver RX-page recycle mechanism is
not effective in this workload and pages have to go through the page
allocator. The lock contention happens during mlx5 DMA TX completion
cycle. And the page allocator cannot keep up at these speeds.[2]
I thought that __free_pages_ok() are mostly freeing high order pages and
thought this is an lock contention for high order pages but Jesper
explained in detail that __free_pages_ok() here are actually freeing
order-0 pages because mlx5 is using order-0 pages to satisfy its page pool
allocation request.[3]
The free path as pointed out by Jesper is:
skb_free_head()
-> skb_free_frag()
-> page_frag_free()
And the pages being freed on this path are order-0 pages.
Fix this by doing similar things as in __page_frag_cache_drain() - send
the being freed page to PCP if it's an order-0 page, or directly to Buddy
if it is a high order page.
With this change, Paweł hasn't noticed lock contention yet in his
workload and Jesper has noticed a 7% performance improvement using a micro
benchmark and lock contention is gone. Ilias' test on a 'low' speed 1Gbit
interface on an cortex-a53 shows ~11% performance boost testing with
64byte packets and __free_pages_ok() disappeared from perf top.
[1]: https://www.spinics.net/lists/netdev/msg531362.html
[2]: https://www.spinics.net/lists/netdev/msg531421.html
[3]: https://www.spinics.net/lists/netdev/msg531556.html
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20181120014544.GB10657@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reported-by: Pawel Staszewski <pstaszewski@itcare.pl>
Analysed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At Maintainer Summit, Greg brought up a topic I proposed around
EXPORT_SYMBOL_GPL usage. The motivation was considerations for when
EXPORT_SYMBOL_GPL is warranted and the criteria for taking the exceptional
step of reclassifying an existing export. Specifically, I wanted to make
the case that although the line is fuzzy and hard to specify in abstract
terms, it is nonetheless clear that devm_memremap_pages() and HMM
(Heterogeneous Memory Management) have crossed it. The
devm_memremap_pages() facility should have been EXPORT_SYMBOL_GPL from the
beginning, and HMM as a derivative of that functionality should have
naturally picked up that designation as well.
Contrary to typical rules, the HMM infrastructure was merged upstream with
zero in-tree consumers. There was a promise at the time that those users
would be merged "soon", but it has been over a year with no drivers
arriving. While the Nouveau driver is about to belatedly make good on
that promise it is clear that HMM was targeted first and foremost at an
out-of-tree consumer.
HMM is derived from devm_memremap_pages(), a facility Christoph and I
spearheaded to support persistent memory. It combines a device lifetime
model with a dynamically created 'struct page' / memmap array for any
physical address range. It enables coordination and control of the many
code paths in the kernel built to interact with memory via 'struct page'
objects. With HMM the integration goes even deeper by allowing device
drivers to hook and manipulate page fault and page free events.
One interpretation of when EXPORT_SYMBOL is suitable is when it is
exporting stable and generic leaf functionality. The
devm_memremap_pages() facility continues to see expanding use cases,
peer-to-peer DMA being the most recent, with no clear end date when it
will stop attracting reworks and semantic changes. It is not suitable to
export devm_memremap_pages() as a stable 3rd party driver API due to the
fact that it is still changing and manipulates core behavior. Moreover,
it is not in the best interest of the long term development of the core
memory management subsystem to permit any external driver to effectively
define its own system-wide memory management policies with no
encouragement to engage with upstream.
I am also concerned that HMM was designed in a way to minimize further
engagement with the core-MM. That, with these hooks in place,
device-drivers are free to implement their own policies without much
consideration for whether and how the core-MM could grow to meet that
need. Going forward not only should HMM be EXPORT_SYMBOL_GPL, but the
core-MM should be allowed the opportunity and stimulus to change and
address these new use cases as first class functionality.
Original changelog:
hmm_devmem_add(), and hmm_devmem_add_resource() duplicated
devm_memremap_pages() and are now simple now wrappers around the core
facility to inject a dev_pagemap instance into the global pgmap_radix and
hook page-idle events. The devm_memremap_pages() interface is base
infrastructure for HMM. HMM has more and deeper ties into the kernel
memory management implementation than base ZONE_DEVICE which is itself a
EXPORT_SYMBOL_GPL facility.
Originally, the HMM page structure creation routines copied the
devm_memremap_pages() code and reused ZONE_DEVICE. A cleanup to unify the
implementations was discussed during the initial review:
http://lkml.iu.edu/hypermail/linux/kernel/1701.2/00812.html Recent work to
extend devm_memremap_pages() for the peer-to-peer-DMA facility enabled
this cleanup to move forward.
In addition to the integration with devm_memremap_pages() HMM depends on
other GPL-only symbols:
mmu_notifier_unregister_no_release
percpu_ref
region_intersects
__class_create
It goes further to consume / indirectly expose functionality that is not
exported to any other driver:
alloc_pages_vma
walk_page_range
HMM is derived from devm_memremap_pages(), and extends deep core-kernel
fundamentals. Similar to devm_memremap_pages(), mark its entry points
EXPORT_SYMBOL_GPL().
[logang@deltatee.com: PCI/P2PDMA: match interface changes to devm_memremap_pages()]
Link: http://lkml.kernel.org/r/20181130225911.2900-1-logang@deltatee.com
Link: http://lkml.kernel.org/r/154275560565.76910.15919297436557795278.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>,
Cc: Michal Hocko <mhocko@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit e8d5134833 ("memremap: change devm_memremap_pages interface to
use struct dev_pagemap") refactored devm_memremap_pages() to allow a
dev_pagemap instance to be supplied. Passing in a dev_pagemap interface
simplifies the design of pgmap type drivers in that they can rely on
container_of() to lookup any private data associated with the given
dev_pagemap instance.
In addition to the cleanups this also gives hmm users multi-order-radix
improvements that arrived with commit ab1b597ee0 "mm,
devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups"
As part of the conversion to the devm_memremap_pages() method of
handling the percpu_ref relative to when pages are put, the percpu_ref
completion needs to move to hmm_devmem_ref_exit(). See 7138970383
("mm, zone_device: Replace {get, put}_zone_device_page...") for details.
Link: http://lkml.kernel.org/r/154275560053.76910.10870962637383152392.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
devm semantics arrange for resources to be torn down when
device-driver-probe fails or when device-driver-release completes.
Similar to devm_memremap_pages() there is no need to support an explicit
remove operation when the users properly adhere to devm semantics.
Note that devm_kzalloc() automatically handles allocating node-local
memory.
Link: http://lkml.kernel.org/r/154275559545.76910.9186690723515469051.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the enum migratetype definition, MIGRATE_MOVABLE is before
MIGRATE_RECLAIMABLE. Change the order of them to match the enumeration's
order.
Link: http://lkml.kernel.org/r/20181121085821.3442-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since a2468cc9bf ("swap: choose swap device according to numa node"),
avail_lists field of swap_info_struct is changed to an array with
MAX_NUMNODES elements. This made swap_info_struct size increased to 40KiB
and needs an order-4 page to hold it.
This is not optimal in that:
1 Most systems have way less than MAX_NUMNODES(1024) nodes so it
is a waste of memory;
2 It could cause swapon failure if the swap device is swapped on
after system has been running for a while, due to no order-4
page is available as pointed out by Vasily Averin.
Solve the above two issues by using nr_node_ids(which is the actual
possible node number the running system has) for avail_lists instead of
MAX_NUMNODES.
nr_node_ids is unknown at compile time so can't be directly used when
declaring this array. What I did here is to declare avail_lists as zero
element array and allocate space for it when allocating space for
swap_info_struct. The reason why keep using array but not pointer is
plist_for_each_entry needs the field to be part of the struct, so pointer
will not work.
This patch is on top of Vasily Averin's fix commit. I think the use of
kvzalloc for swap_info_struct is still needed in case nr_node_ids is
really big on some systems.
Link: http://lkml.kernel.org/r/20181115083847.GA11129@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit fa5e084e43 ("vmscan: do not unconditionally treat zones that
fail zone_reclaim() as full") changed the return value of
node_reclaim(). The original return value 0 means NODE_RECLAIM_SOME
after this commit.
While the return value of node_reclaim() when CONFIG_NUMA is n is not
changed. This will leads to call zone_watermark_ok() again.
This patch fixes the return value by adjusting to NODE_RECLAIM_NOSCAN.
Since node_reclaim() is only called in page_alloc.c, move it to
mm/internal.h.
Link: http://lkml.kernel.org/r/20181113080436.22078-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that totalram_pages and managed_pages are atomic varibles, no need of
managed_page_count spinlock. The lock had really a weak consistency
guarantee. It hasn't been used for anything but the update but no reader
actually cares about all the values being updated to be in sync.
Link: http://lkml.kernel.org/r/1542090790-21750-5-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
totalram_pages and totalhigh_pages are made static inline function.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.
This patch converts zone->managed_pages. Subsequent patches will convert
totalram_panges, totalhigh_pages and eventually managed_page_count_lock
will be removed.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
Link: http://lkml.kernel.org/r/1542090790-21750-3-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: convert totalram_pages, totalhigh_pages and managed
pages to atomic", v5.
This series converts totalram_pages, totalhigh_pages and
zone->managed_pages to atomic variables.
totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 It seemes better
to remove the lock and convert variables to atomic. With the change,
preventing poteintial store-to-read tearing comes as a bonus.
This patch (of 4):
This is in preparation to a later patch which converts totalram_pages and
zone->managed_pages to atomic variables. Please note that re-reading the
value might lead to a different value and as such it could lead to
unexpected behavior. There are no known bugs as a result of the current
code but it is better to prevent from them in principle.
Link: http://lkml.kernel.org/r/1542090790-21750-2-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
per_cpu_pageset is cleared by memset, it is not necessary to reset it
again.
Link: http://lkml.kernel.org/r/20181021023920.5501-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Per-cpu numa_node provides a default node for each possible cpu. The
association gets initialized during the boot when the architecture
specific code explores cpu->NUMA affinity. When the whole NUMA node is
removed though we are clearing this association
try_offline_node
check_and_unmap_cpu_on_node
unmap_cpu_on_node
numa_clear_node
numa_set_node(cpu, NUMA_NO_NODE)
This means that whoever calls cpu_to_node for a cpu associated with such a
node will get NUMA_NO_NODE. This is problematic for two reasons. First
it is fragile because __alloc_pages_node would simply blow up on an
out-of-bound access. We have encountered this when loading kvm module
BUG: unable to handle kernel paging request at 00000000000021c0
IP: __alloc_pages_nodemask+0x93/0xb70
PGD 800000ffe853e067 PUD 7336bbc067 PMD 0
Oops: 0000 [#1] SMP
[...]
CPU: 88 PID: 1223749 Comm: modprobe Tainted: G W 4.4.156-94.64-default #1
RIP: __alloc_pages_nodemask+0x93/0xb70
RSP: 0018:ffff887354493b40 EFLAGS: 00010202
RAX: 00000000000021c0 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 00000000014000c0
RBP: 00000000014000c0 R08: ffffffffffffffff R09: 0000000000000000
R10: ffff88fffc89e790 R11: 0000000000014000 R12: 0000000000000101
R13: ffffffffa0772cd4 R14: ffffffffa0769ac0 R15: 0000000000000000
FS: 00007fdf2f2f1700(0000) GS:ffff88fffc880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000021c0 CR3: 00000077205ee000 CR4: 0000000000360670
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
alloc_vmcs_cpu+0x3d/0x90 [kvm_intel]
hardware_setup+0x781/0x849 [kvm_intel]
kvm_arch_hardware_setup+0x28/0x190 [kvm]
kvm_init+0x7c/0x2d0 [kvm]
vmx_init+0x1e/0x32c [kvm_intel]
do_one_initcall+0xca/0x1f0
do_init_module+0x5a/0x1d7
load_module+0x1393/0x1c90
SYSC_finit_module+0x70/0xa0
entry_SYSCALL_64_fastpath+0x1e/0xb7
DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xb7
on an older kernel but the code is basically the same in the current Linus
tree as well. alloc_vmcs_cpu could use alloc_pages_nodemask which would
recognize NUMA_NO_NODE and use alloc_pages_node which would translate it
to numa_mem_id but that is wrong as well because it would use a cpu
affinity of the local CPU which might be quite far from the original node.
It is also reasonable to expect that cpu_to_node will provide a sane
value and there might be many more callers like that.
The second problem is that __register_one_node relies on cpu_to_node to
properly associate cpus back to the node when it is onlined. We do not
want to lose that link as there is no arch independent way to get it from
the early boot time AFAICS.
Drop the whole check_and_unmap_cpu_on_node machinery and keep the
association to fix both issues. The NODE_DATA(nid) is not deallocated so
it will stay in place and if anybody wants to allocate from that node then
a fallback node will be used.
Thanks to Vlastimil Babka for his live system debugging skills that helped
debugging the issue.
Link: http://lkml.kernel.org/r/20181108100413.966-1-mhocko@kernel.org
Fixes: e13fe8695c ("cpu-hotplug,memory-hotplug: clear cpu_to_node() when offlining the node")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should get rid of this function. It no longer serves its purpose.
This is a historical artifact from 2005 where do_brk was called outside of
the core mm. We do have a proper abstraction in vm_brk_flags and that one
does the locking properly so there is no need to use this function.
Link: http://lkml.kernel.org/r/20181108174856.10811-1-tiny.windzz@gmail.com
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace jhash2 with xxhash.
Perf numbers:
Intel(R) Xeon(R) CPU E5-2420 v2 @ 2.20GHz
ksm: crc32c hash() 12081 MB/s
ksm: xxh64 hash() 8770 MB/s
ksm: xxh32 hash() 4529 MB/s
ksm: jhash2 hash() 1569 MB/s
Sioh Lee did some testing:
crc32c_intel: 1084.10ns
crc32c (no hardware acceleration): 7012.51ns
xxhash32: 2227.75ns
xxhash64: 1413.16ns
jhash2: 5128.30ns
As jhash2 always will be slower (for data size like PAGE_SIZE). Don't use
it in ksm at all.
Use only xxhash for now, because for using crc32c, cryptoapi must be
initialized first - that requires some tricky solution to work well in all
situations.
Link: http://lkml.kernel.org/r/20181023182554.23464-3-nefelim4ag@gmail.com
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: leesioh <solee@os.korea.ac.kr>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiko has complained that his log is swamped by warnings from
has_unmovable_pages
[ 20.536664] page dumped because: has_unmovable_pages
[ 20.536792] page:000003d081ff4080 count:1 mapcount:0 mapping:000000008ff88600 index:0x0 compound_mapcount: 0
[ 20.536794] flags: 0x3fffe0000010200(slab|head)
[ 20.536795] raw: 03fffe0000010200 0000000000000100 0000000000000200 000000008ff88600
[ 20.536796] raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000
[ 20.536797] page dumped because: has_unmovable_pages
[ 20.536814] page:000003d0823b0000 count:1 mapcount:0 mapping:0000000000000000 index:0x0
[ 20.536815] flags: 0x7fffe0000000000()
[ 20.536817] raw: 07fffe0000000000 0000000000000100 0000000000000200 0000000000000000
[ 20.536818] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
which are not triggered by the memory hotplug but rather CMA allocator.
The original idea behind dumping the page state for all call paths was
that these messages will be helpful debugging failures. From the above it
seems that this is not the case for the CMA path because we are lacking
much more context. E.g the second reported page might be a CMA allocated
page. It is still interesting to see a slab page in the CMA area but it
is hard to tell whether this is bug from the above output alone.
Address this issue by dumping the page state only on request. Both
start_isolate_page_range and has_unmovable_pages already have an argument
to ignore hwpoison pages so make this argument more generic and turn it
into flags and allow callers to combine non-default modes into a mask.
While we are at it, has_unmovable_pages call from
is_pageblock_removable_nolock (sysfs removable file) is questionable to
report the failure so drop it from there as well.
Link: http://lkml.kernel.org/r/20181218092802.31429-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is only very limited information printed when the memory offlining
fails:
[ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff
This tells us that the failure is triggered by the userspace intervention
but it doesn't tell us much more about the underlying reason. It might be
that the page migration failes repeatedly and the userspace timeout
expires and send a signal or it might be some of the earlier steps
(isolation, memory notifier) takes too long.
If the migration failes then it would be really helpful to see which page
that and its state. The same applies to the isolation phase. If we fail
to isolate a page from the allocator then knowing the state of the page
would be helpful as well.
Dump the page state that fails to get isolated or migrated. This will
tell us more about the failure and what to focus on during debugging.
[akpm@linux-foundation.org: add missing printk arg]
[mhocko@suse.com: tweak dump_page() `reason' text]
Link: http://lkml.kernel.org/r/20181116083020.20260-6-mhocko@kernel.org
Link: http://lkml.kernel.org/r/20181107101830.17405-6-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The memory offlining failure reporting is inconsistent and insufficient.
Some error paths simply do not report the failure to the log at all. When
we do report there are no details about the reason of the failure and
there are several of them which makes memory offlining failures hard to
debug.
Make sure that the
memory offlining [mem %#010llx-%#010llx] failed
message is printed for all failures and also provide a short textual
reason for the failure e.g.
[ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff
this tells us that the offlining has failed because of a signal pending
aka user intervention.
[akpm@linux-foundation.org: tweak messages a bit]
Link: http://lkml.kernel.org/r/20181107101830.17405-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This function is never called from a context which would provide
misaligned pfn range so drop the pointless check.
Link: http://lkml.kernel.org/r/20181107101830.17405-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__dump_page messages use KERN_EMERG resp. KERN_ALERT loglevel (this is
the case since 2004). Most callers of this function are really detecting
a critical page state and BUG right after. On the other hand the function
is called also from contexts which just want to inform about the page
state and those would rather not disrupt logs that much (e.g. some
systems route these messages to the normal console).
Reduce the loglevel to KERN_WARNING to make dump_page easier to reuse for
other contexts while those messages will still make it to the kernel log
in most setups. Even if the loglevel setup filters warnings away those
paths that are really critical already print the more targeted error or
panic and that should make it to the kernel log.
[mhocko@kernel.org: fix __dump_page()]
Link: http://lkml.kernel.org/r/20181212142540.GA7378@dhcp22.suse.cz
[akpm@linux-foundation.org: s/KERN_WARN/KERN_WARNING/, per Michal]
Link: http://lkml.kernel.org/r/20181107101830.17405-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have been promissing to improve memory offlining failures debugging for
quite some time. As things stand now we get only very limited information
in the kernel log when the offlining fails. It is usually only
[ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed
with no further details. We do not know what exactly fails and for what
reason. Whenever I was forced to debug such a failure I've always had to
do a debugging patch to tell me more. We can enable some tracepoints but
it would be much better to get a better picture without using them.
This patch series does 2 things. The first one is to make dump_page more
usable by printing more information about the mapping patch 1. Then it
reduces the log level from emerg to warning so that this function is
usable from less critical context patch 2. Then I have added more
detailed information about the offlining failure patch 4 and finally add
dump_page to isolation and offlining migration paths. Patch 3 is a
trivial cleanup.
This patch (of 6):
__dump_page prints the mapping pointer but that is quite unhelpful for
many reports because the pointer itself only helps to distinguish anon/ksm
mappings from other ones (because of lowest bits set). Sometimes it would
be much more helpful to know what kind of mapping that is actually and if
we know this is a file mapping then also try to resolve the dentry name.
[dan.carpenter@oracle.com: fix a width vs precision bug in printk]
Link: http://lkml.kernel.org/r/20181123072135.gqvblm2vdujbvfjs@kili.mountain
[mhocko@kernel.org: use %dp to print dentry]
Link: http://lkml.kernel.org/r/20181125080834.GB12455@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20181107101830.17405-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's a trivial simplification for get_next_ra_size() and clear enough for
humans to understand.
It also fixes potential overflow if ra->size(< ra_pages) is too large.
Link: http://lkml.kernel.org/r/1540707206-19649-1-git-send-email-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Contrary to its name, mmu_notifier_synchronize() does not synchronize the
notifier's SRCU instance, but rather waits for RCU callbacks to finish.
i.e. it invokes rcu_barrier(). The RCU documentation is quite clear on
this matter, explicitly calling out that rcu_barrier() does not imply
synchronize_rcu().
As there are no callers of mmu_notifier_synchronize() and it's unclear
whether any user of mmu_notifier_call_srcu() will ever want to barrier on
their callbacks, simply remove the function.
Link: http://lkml.kernel.org/r/20181106134705.14197-1-sean.j.christopherson@intel.com
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In hot remove, we try to clear poisoned pages, but a small optimization to
check if num_poisoned_pages is 0 helps remove the iteration through
nr_pages.
[akpm@linux-foundation.org: tweak comment text]
Link: http://lkml.kernel.org/r/20181102120001.4526-1-bsingharora@gmail.com
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The (root-only) page owner read might allocate a large size of memory with
a large read count. Allocation fails can easily occur when doing high
order allocations.
Clamp buffer size to PAGE_SIZE to avoid arbitrary size allocation
and avoid allocation fails due to high order allocation.
[akpm@linux-foundation.org: use min_t()]
Link: http://lkml.kernel.org/r/1541091607-27402-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If __cmpxchg_double_slab() fails and (l != m), current code records
transition states of slub action.
Update the action after __cmpxchg_double_slab() success to record the
final state.
[akpm@linux-foundation.org: more whitespace cleanup]
Link: http://lkml.kernel.org/r/20181107013119.3816-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
node_match() is a static function and is only invoked in slub.c.
In all three places, `page' is ensured to be valid.
Link: http://lkml.kernel.org/r/20181106150245.1668-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cpu_slab is a per cpu variable which is allocated in all or none. If a
cpu_slab failed to be allocated, the slub is not usable.
We could use cpu_slab without validation in __flush_cpu_slab().
Link: http://lkml.kernel.org/r/20181103141218.22844-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WARN_ON() already contains an unlikely(), so it's not necessary to use
unlikely.
Also change WARN_ON() back to WARN_ON_ONCE() to avoid potentially
spamming dmesg with user-triggerable large allocations.
[akpm@linux-foundation.org: s/WARN_ON/WARN_ON_ONCE/, per Vlastimil]
Link: http://lkml.kernel.org/r/20181104125028.3572-1-tiny.windzz@gmail.com
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds a "SPDX-License-Identifier: GPL-2.0" mark to all source
files under mm/kasan.
Link: http://lkml.kernel.org/r/bce2d1e618afa5142e81961ab8fa4b4165337380.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds __must_check annotations to kasan hooks that return a
pointer to make sure that a tagged pointer always gets propagated.
Link: http://lkml.kernel.org/r/03b269c5e453945f724bfca3159d4e1333a8fb1c.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tag-based KASAN doesn't check memory accesses through pointers tagged with
0xff. When page_address is used to get pointer to memory that corresponds
to some page, the tag of the resulting pointer gets set to 0xff, even
though the allocated memory might have been tagged differently.
For slab pages it's impossible to recover the correct tag to return from
page_address, since the page might contain multiple slab objects tagged
with different values, and we can't know in advance which one of them is
going to get accessed. For non slab pages however, we can recover the tag
in page_address, since the whole page was marked with the same tag.
This patch adds tagging to non slab memory allocated with pagealloc. To
set the tag of the pointer returned from page_address, the tag gets stored
to page->flags when the memory gets allocated.
Link: http://lkml.kernel.org/r/d758ddcef46a5abc9970182b9137e2fbee202a2c.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit adds tag-based KASAN specific hooks implementation and
adjusts common generic and tag-based KASAN ones.
1. When a new slab cache is created, tag-based KASAN rounds up the size of
the objects in this cache to KASAN_SHADOW_SCALE_SIZE (== 16).
2. On each kmalloc tag-based KASAN generates a random tag, sets the shadow
memory, that corresponds to this object to this tag, and embeds this
tag value into the top byte of the returned pointer.
3. On each kfree tag-based KASAN poisons the shadow memory with a random
tag to allow detection of use-after-free bugs.
The rest of the logic of the hook implementation is very much similar to
the one provided by generic KASAN. Tag-based KASAN saves allocation and
free stack metadata to the slab object the same way generic KASAN does.
Link: http://lkml.kernel.org/r/bda78069e3b8422039794050ddcb2d53d053ed41.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While with SLUB we can actually preassign tags for caches with contructors
and store them in pointers in the freelist, SLAB doesn't allow that since
the freelist is stored as an array of indexes, so there are no pointers to
store the tags.
Instead we compute the tag twice, once when a slab is created before
calling the constructor and then again each time when an object is
allocated with kmalloc. Tag is computed simply by taking the lowest byte
of the index that corresponds to the object. However in kasan_kmalloc we
only have access to the objects pointer, so we need a way to find out
which index this object corresponds to.
This patch moves obj_to_index from slab.c to include/linux/slab_def.h to
be reused by KASAN.
Link: http://lkml.kernel.org/r/c02cd9e574cfd93858e43ac94b05e38f891fef64.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit adds rountines, that print tag-based KASAN error reports.
Those are quite similar to generic KASAN, the difference is:
1. The way tag-based KASAN finds the first bad shadow cell (with a
mismatching tag). Tag-based KASAN compares memory tags from the shadow
memory to the pointer tag.
2. Tag-based KASAN reports all bugs with the "KASAN: invalid-access"
header.
Also simplify generic KASAN find_first_bad_addr.
Link: http://lkml.kernel.org/r/aee6897b1bd077732a315fd84c6b4f234dbfdfcb.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move generic KASAN specific error reporting routines to generic_report.c
without any functional changes, leaving common error reporting code in
report.c to be later reused by tag-based KASAN.
Link: http://lkml.kernel.org/r/ba48c32f8e5aefedee78998ccff0413bee9e0f5b.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The krealloc function checks where the same buffer was reused or a new one
allocated by comparing kernel pointers. Tag-based KASAN changes memory
tag on the krealloc'ed chunk of memory and therefore also changes the
pointer tag of the returned pointer. Therefore we need to perform
comparison on untagged (with tags reset) pointers to check whether it's
the same memory region or not.
Link: http://lkml.kernel.org/r/14f6190d7846186a3506cd66d82446646fe65090.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An object constructor can initialize pointers within this objects based on
the address of the object. Since the object address might be tagged, we
need to assign a tag before calling constructor.
The implemented approach is to assign tags to objects with constructors
when a slab is allocated and call constructors once as usual. The
downside is that such object would always have the same tag when it is
reallocated, so we won't catch use-after-frees on it.
Also pressign tags for objects from SLAB_TYPESAFE_BY_RCU caches, since
they can be validy accessed after having been freed.
Link: http://lkml.kernel.org/r/f158a8a74a031d66f0a9398a5b0ed453c37ba09a.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit adds a few helper functions, that are meant to be used to work
with tags embedded in the top byte of kernel pointers: to set, to get or
to reset the top byte.
Link: http://lkml.kernel.org/r/f6c6437bb8e143bc44f42c3c259c62e734be7935.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A tag-based KASAN shadow memory cell contains a memory tag, that
corresponds to the tag in the top byte of the pointer, that points to that
memory. The native top byte value of kernel pointers is 0xff, so with
tag-based KASAN we need to initialize shadow memory to 0xff.
[cai@lca.pw: arm64: skip kmemleak for KASAN again\
Link: http://lkml.kernel.org/r/20181226020550.63712-1-cai@lca.pw
Link: http://lkml.kernel.org/r/5cc1b789aad7c99cf4f3ec5b328b147ad53edb40.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With tag based KASAN mode the early shadow value is 0xff and not 0x00, so
this patch renames kasan_zero_(page|pte|pmd|pud|p4d) to
kasan_early_shadow_(page|pte|pmd|pud|p4d) to avoid confusion.
Link: http://lkml.kernel.org/r/3fed313280ebf4f88645f5b89ccbc066d320e177.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit splits the current CONFIG_KASAN config option into two:
1. CONFIG_KASAN_GENERIC, that enables the generic KASAN mode (the one
that exists now);
2. CONFIG_KASAN_SW_TAGS, that enables the software tag-based KASAN mode.
The name CONFIG_KASAN_SW_TAGS is chosen as in the future we will have
another hardware tag-based KASAN mode, that will rely on hardware memory
tagging support in arm64.
With CONFIG_KASAN_SW_TAGS enabled, compiler options are changed to
instrument kernel files with -fsantize=kernel-hwaddress (except the ones
for which KASAN_SANITIZE := n is set).
Both CONFIG_KASAN_GENERIC and CONFIG_KASAN_SW_TAGS support both
CONFIG_KASAN_INLINE and CONFIG_KASAN_OUTLINE instrumentation modes.
This commit also adds empty placeholder (for now) implementation of
tag-based KASAN specific hooks inserted by the compiler and adjusts
common hooks implementation.
While this commit adds the CONFIG_KASAN_SW_TAGS config option, this option
is not selectable, as it depends on HAVE_ARCH_KASAN_SW_TAGS, which we will
enable once all the infrastracture code has been added.
Link: http://lkml.kernel.org/r/b2550106eb8a68b10fefbabce820910b115aa853.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
