IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- Clock and reset driver for Toshiba Visconti SoCs
* clk-socfpga:
clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource()
clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource()
clk: socfpga: remove redundant assignment after a mask operation
clk: socfpga: remove redundant assignment on division
* clk-toshiba:
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC
dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC
* clk-st:
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
* clk-bitmain:
clk: bm1880: remove kfrees on static allocations
* clk-x86:
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: Introduce clk-tps68470 driver
platform/x86: int3472: Deal with probe ordering issues
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Split into 2 drivers
platform_data: Add linux/platform_data/tps68470.h file
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
* clk-stm:
clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell
* clk-amlogic:
clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB
* clk-allwinner:
clk: sunxi-ng: Add support for the D1 SoC clocks
clk: sunxi-ng: gate: Add macros for gates with fixed dividers
clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw
clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw
clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw
dt-bindings: clk: Add compatibles for D1 CCUs
clk: sunxi-ng: Allow the CCU core to be built as a module
clk: sunxi-ng: Convert early providers to platform drivers
clk: sunxi-ng: Allow drivers to be built as modules
clk: sunxi-ng: Export symbols used by CCU drivers
Clang warns:
drivers/clk/visconti/pll.c:292:20: warning: address of array 'ctx->clk_data.hws' will always evaluate to 'true' [-Wpointer-bool-conversion]
if (ctx->clk_data.hws && id)
~~~~~~~~~~~~~~^~~ ~~
1 warning generated.
This array cannot be NULL if ctx is not NULL, which is allocated in
visconti_init_pll(), so just remove the check, which matches other clk
drivers.
Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1564
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220107183303.2337676-1-nathan@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In newer SoC we have to clear bit for disabling 48MHz oscillator
clock gate. Remove CLK_GATE_SET_TO_DISABLE flag for proper enable
and disable of 48MHz clock.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-6-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Replace hard coded con_id string with fch_data->name. We have clk
consumers looking up with different clock names, hence use dynamic
con_id string during clk lookup registration. fch_data->name will
be initialized in acpi driver based on fmw property value.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-5-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
FCH controller clock configuration slightly differs across AMD's
SOC architectures. Newer family of SOC only support a 48MHz fix
clock while stoney SOC family has a clk_mux to choose 48MHz and
25 MHz clk. At present fixed clk support is only enabled for RV
architecture using "is-rv" device property initialized from boot
loader. This limit 48MHz fixed clock gate support to RV platform
unless we add similar device property in boot loader for other
architectures.
Add pci_device_id table with Stoney platform id and replace "is-rv"
device property check with pci id match to add clk mux support with
25MHz and 48MHz clk support based on clk mux selection. This enable
48Mhz fixed fch clock support by default on all newer SOC's except
stoney. Also replace RV with FIXED as a generic naming conventions
across all platforms and changed module description.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-2-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
bm1880_clk_unregister_pll & bm1880_clk_unregister_div both try to
free statically allocated variables, so remove those kfrees.
For example, if we take L703 kfree(div_hw):
- div_hw is a bm1880_div_hw_clock pointer
- in bm1880_clk_register_plls this is pointed to an element of arg1:
struct bm1880_div_hw_clock *clks
- in the probe, where bm1880_clk_register_plls is called arg1 is
bm1880_div_clks, defined on L371:
static struct bm1880_div_hw_clock bm1880_div_clks[]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 1ab4601da55b ("clk: Add common clock driver for BM1880 SoC")
Link: https://lore.kernel.org/r/20211223154244.1024062-1-conor.dooley@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit 21e743300dd0 ("clk: stm32mp1: new compatible for secure RCC support")
introduced a new Kconfig option COMMON_CLK_STM32MP157_SCMI which is not
used anywhere.
Further, it looks like this Kconfig option is just to select bunch of other
options which doesn't sound correct to me. There is no need for another
SCMI firmware based clock driver and hence the same applies for the config
option too.
Let us just drop the unused COMMON_CLK_STM32MP157_SCMI before it gives
someone idea to write a specific clock driver for this SoC/platform.
Cc: Etienne Carriere <etienne.carriere@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20211015150043.140793-1-sudeep.holla@arm.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to avoid having duplicated addresses within the DT,
only have one unit-address per clockgen and each driver within
the clockgen should look at the parent node (overall clockgen)
to figure out the reg property. Such behavior is already in
place in other STi platform clock drivers such as clk-flexgen
and clkgen-pll. Keep backward compatibility by first looking
at reg within the node before looking into the parent node.
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lore.kernel.org/r/20211218211157.188214-3-avolmat@me.com
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to avoid having duplicated addresses within the DT,
only have one unit-address per clockgen and each driver within
the clockgen should look at the parent node (overall clockgen)
to figure out the reg property. Such behavior is already in
place in other STi platform clock drivers such as clk-flexgen
and clkgen-pll. Keep backward compatibility by first looking
at reg within the node before looking into the parent node.
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lore.kernel.org/r/20211218211157.188214-2-avolmat@me.com
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The registers for some clocks in the SOC area, which are under the power
domain are required to be enabled before accessing them. During the
clk_summary if the power-domains are not enabled they could result into
NoC errors.
Thus ensure the register access of the clock controller is done with
pm_untime_get/put functions.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for common interface of the common clock and reset driver
for Toshiba Visconti5 and its SoC, TMPV7708. The PIPLLCT provides the PLL,
and the PISMU provides clock and reset functionality.
Each drivers are provided in this patch.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211025031038.4180686-4-nobuhiro1.iwamatsu@toshiba.co.jp
[sboyd@kernel.org: Add bitfield.h include to pll.c]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210907085144.4458-1-caihuoqing@baidu.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210907085137.4407-1-caihuoqing@baidu.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The assignment operation after a & mask operation is redundant, the
variables being assigned are not used afterwards. Replace the &=
operator with just & operator.
Cleans up two clang-scan warnings:
drivers/clk/socfpga/clk-gate.c:37:10: warning: Although the value stored
to 'l4_src' is used in the enclosing expression, the value is never
actually read from 'l4_src' [deadcode.DeadStores]
return l4_src &= 0x1;
^ ~~~
drivers/clk/socfpga/clk-gate.c:46:10: warning: Although the value stored
to 'perpll_src' is used in the enclosing expression, the value is never
actually read from 'perpll_src' [deadcode.DeadStores]
return perpll_src &= 0x3;
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211230150321.167576-1-colin.i.king@gmail.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The variable parent_rate is being divided by div and the result
is re-assigned to parent_rate before being returned. The assignment
is redundant, replace /= operator with just / operator.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211221003750.212780-1-colin.i.king@gmail.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This introduces bindings and drivers for the global clock controllers
found in SDX65, SM8450 and MSM8976, as well as RPMh clock support for
SDX65 and SM8450.
It cleans up the SMD RPM clock driver and it adds includes for
clk-provider.h throughout the clock providers that was lacking this.
-----BEGIN PGP SIGNATURE-----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=PGNc
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-for-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull qcom clk driver updates from Bjorn Andersson:
This introduces bindings and drivers for the global clock controllers
found in SDX65, SM8450 and MSM8976, as well as RPMh clock support for
SDX65 and SM8450.
It cleans up the SMD RPM clock driver and it adds includes for
clk-provider.h throughout the clock providers that was lacking this.
* tag 'qcom-clk-for-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
clk: qcom: turingcc-qcs404: explicitly include clk-provider.h
clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h
clk: qcom: mmcc-apq8084: explicitly include clk-provider.h
clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h
clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h
clk: qcom: gcc-sm6350: explicitly include clk-provider.h
clk: qcom: gcc-msm8994: explicitly include clk-provider.h
clk: qcom: gcc-sm8350: explicitly include clk-provider.h
clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver
dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller
clk: qcom: Add clock driver for SM8450
clk: qcom: Add SDX65 GCC support
clk: qcom: Add LUCID_EVO PLL type for SDX65
dt-bindings: clock: Add SM8450 GCC clock bindings
dt-bindings: clock: Add SDX65 GCC clock bindings
clk: qcom: rpmh: add support for SM8450 rpmh clocks
dt-bindings: clock: Add RPMHCC bindings for SM8450
clk: qcom: smd-rpm: Drop binary value handling for buffered clock
clk: qcom: smd-rpm: Drop the use of struct rpm_cc
clk: qcom: smd-rpm: Drop MFD qcom-rpm reference
...
The gcc cfg noc lpass clock is required to be always enabled for the
LPASS core and audio drivers to be functional.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
PLL poll for lock detection can take more than 100us for certain type
of Lucid PLLs and also the new PLLs types(Lucid EVO), thus update to 200us.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-9-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-8-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-7-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-6-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-5-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-4-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-3-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-2-vkoul@kernel.org
This is an initial implementation adding basic clocks, such as UART,
USI, I2C, WDT, ect. and their parent clocks. It is heavily based on the
Exynos850 clock driver at 'drivers/clk/samsung/clk-exynos850.c' which
was made by Sam Protsenko, thus the copyright and author lines were
kept.
Bus clocks are enabled by default as well to avoid hangs while trying to
access CMU registers.
Only the parts of CMU_TOP needed for CMU_CORE and CMU_PERI, a bit of
CMU_CORE, and most of CMU_PERI is implemented as of now.
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206153124.427102-7-virag.david003@gmail.com
pll1417x is used in Exynos7885 SoC for top-level integer PLLs.
It is similar enough to pll0822x that practically the same code can
handle both. The difference that's to be noted is that when defining a
pl1417x PLL, the "con" parameter of the PLL macro should be set to the
CON1 register instead of CON3, like this:
PLL(pll_1417x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON0_PLL_SHARED0,
NULL),
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211206153124.427102-6-virag.david003@gmail.com
Rename exynos850_register_cmu to exynos_arm64_register_cmu and move it
to a new file called "clk-exynos-arm64.c".
This should have no functional changes, but it will allow this code to
be shared between other arm64 Exynos SoCs, like the Exynos7885 and
possibly ExynosAuto V9.
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206153124.427102-5-virag.david003@gmail.com
System Register is used to configure system behavior, like USI protocol,
etc. SYSREG clocks should be provided to corresponding syscon nodes, to
make it possible to modify SYSREG registers.
While at it, add also missing PMU and GPIO clocks, which looks necessary
and might be needed for corresponding Exynos850 features soon.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20211217161549.24836-3-semen.protsenko@linaro.org
Add support for the global clock controller found on MSM8956
and MSM8976 SoCs.
Since the multimedia clocks are actually in the GCC on these
SoCs, this will allow drivers to probe and control basically
all the required clocks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211208091036.132334-3-marijn.suijten@somainline.org
This adds Global Clock controller (GCC) driver for SM8450 SoC including
the gcc resets and gdsc.
This patch is based on initial code downstream by Vivek Aknurwar
<viveka@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211207114003.100693-3-vkoul@kernel.org
The pointer data is being initialized with a value and a few lines
later on being re-assigned the same value, so this re-assignment is
redundant. Clean up the code and remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211126221239.1100960-1-colin.i.king@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
stm32's clk driver register two ltdc gate clk to clk core by
clk_hw_register_gate() and clk_hw_register_composite()
first: 'stm32f429_gates[]', clk name is 'ltdc', which no user to use.
second: 'stm32f429_aux_clk[]', clk name is 'lcd-tft', used by ltdc driver
both of them point to the same offset of stm32's RCC register. after
kernel enter console, clk core turn off ltdc's clk as 'stm32f429_gates[]'
is no one to use. but, actually 'stm32f429_aux_clk[]' is in use.
stm32f469/746/769 have the same issue, fix it.
Fixes: daf2d117cbca ("clk: stm32f4: Add lcd-tft clock")
Link: https://lore.kernel.org/linux-arm-kernel/1590564453-24499-7-git-send-email-dillon.minfei@gmail.com/
Link: https://lore.kernel.org/lkml/CAPTRvHkf0cK_4ZidM17rPo99gWDmxgqFt4CDUjqFFwkOeQeFDg@mail.gmail.com/
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/1635232282-3992-10-git-send-email-dillon.minfei@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in
the kernel the Regulators and Clocks are controlled by an OpRegion
driver designed to work with power control methods defined in ACPI, but
some platforms lack those methods, meaning drivers need to be able to
consume the resources of these chips through the usual frameworks.
This commit adds a driver for the clocks provided by the tps68470,
and is designed to bind to the platform_device registered by the
intel_skl_int3472 module.
This is based on this out of tree driver written by Intel:
https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/clk/clk-tps68470.c
with various cleanups added.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-7-hdegoede@redhat.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Clock-and-Reset controller resides in a core power domain on NVIDIA
Tegra SoCs. In order to support voltage scaling of the core power domain,
we hook up DVFS-capable clocks to the core GENPD for managing of the
GENPD's performance state based on the clock changes.
Some clocks don't have any specific physical hardware unit that backs
them, like root PLLs and system clock and they have theirs own voltage
requirements. This patch adds new clk-device driver that backs the clocks
and provides runtime PM functionality for them. A virtual clk-device is
created for each such DVFS-capable clock at the clock's registration time
by the new tegra_clk_register() helper. Driver changes clock's device
GENPD performance state based on clk-rate notifications.
In result we have this sequence of events:
1. Clock driver creates virtual device for selective clocks, enables
runtime PM for the created device and registers the clock.
2. Clk-device driver starts to listen to clock rate changes.
3. Something changes clk rate or enables/disables clk.
4. CCF core propagates the change through the clk tree.
5. Clk-device driver gets clock rate-change notification or GENPD core
handles prepare/unprepare of the clock.
6. Clk-device driver changes GENPD performance state on clock rate
change.
7. GENPD driver changes voltage regulator state change.
8. The regulator state is committed to hardware via I2C.
We rely on fact that DVFS is not needed for Tegra I2C and that Tegra I2C
driver already keeps clock always-prepared. Hence I2C subsystem stays
independent from the clk power management and there are no deadlock spots
in the sequence.
Currently all clocks are registered very early during kernel boot when the
device driver core isn't available yet. The clk-device can't be created
at that time. This patch splits the registration of the clocks in two
phases:
1. Register all essential clocks which don't use RPM and are needed
during early boot.
2. Register at a later boot time the rest of clocks.
This patch adds power management support for Tegra20 and Tegra30 clocks.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current default is to leave the VDE clock's parent at the default,
which is clk_m. However, that is not a configuration that will allow the
VDE to function. Reparent it to pll_p instead to make sure the hardware
can actually decode video content.
Tested-by: Anton Bambura <jenneron@protonmail.com> # ASUS TF701T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We don't want vendors to be enabling this part of the clk code and
shipping it to customers. Exposing the ability to change clk frequencies
and parents via debugfs is potentially damaging to the system if folks
don't know what they're doing. Emit a strong warning so that the message
is clear: don't enable this outside of development systems.
Fixes: 37215da5553e ("clk: Add support for setting clk_rate via debugfs")
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211210014237.2130300-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Useful for testing mux clocks. One can write the index of the parent to
be set into clk_parent node, starting from 0. Example
# cd /sys/kernel/debug/clk/mout_peri_bus
# cat clk_possible_parents
dout_shared0_div4 dout_shared1_div4
# cat clk_parent
dout_shared0_div4
# echo 1 > clk_parent
# cat clk_parent
dout_shared1_div4
CLOCK_ALLOW_WRITE_DEBUGFS has to be defined in drivers/clk/clk.c in
order to use this feature.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Link: https://lore.kernel.org/r/20211013172042.10884-1-semen.protsenko@linaro.org
[sboyd@kernel.org: Collapse ifdefs]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Nothing stops a clk controller from registering an OF clk provider
before registering those clks with the clk framework. This is not great
but we deal with it in the clk framework by refusing to hand out struct
clk pointers when 'hw->core' is NULL, the indication that clk_register()
has been called.
Within clk_core_fill_parent_index() we considered this case when a
clk_hw pointer is referenced directly by filling in the parent cache
with an -EPROBE_DEFER pointer when the core pointer is NULL. When we
lookup a parent with clk_core_get() we don't care about the return value
being NULL though, because that was considered largely impossible, but
it's been proven now that it can be NULL if two clk providers are
probing in parallel and the parent provider has been registered before
the clk has. Let's check for NULL here as well and treat it the same as
direct clk_hw references.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20211208041534.3928718-1-sboyd@kernel.org
Make const pointer error a static const array, removes a dereference
and shrinks object code a little.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211127173036.150535-1-colin.i.king@gmail.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Extend the clock driver to add support also for clock gating. The
following peripherals can be gated: UHPHS, UDPHS, MCRAMC, HMATRIX.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211103085102.1656081-5-horatiu.vultur@microchip.com
Add devm_clk_hw_register_gate() - devres-managed version of
clk_hw_register_gate()
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211103085102.1656081-2-horatiu.vultur@microchip.com
This adds Generic Clock Controller driver for lan966x SoC.
Lan966x clock controller contains 3 PLLs - cpu_clk, ddr_clk
and sys_clk. It generates and supplies clock to various
peripherals within SoC.
Register settings required to provide GCK clocking to a
peripheral is as below:
GCK_SRC_SEL = Select clock source.
GCK_PRESCALER = Set divider value.
GCK_ENA = 1 - Enable GCK clock.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Co-developed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211103061935.25677-4-kavyasree.kotagiri@microchip.com
