IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Rather than applying display workarounds as part of
intel_clock_gating_init() (which in turn is confusingly called from
i915_gem_init during device probe), handle them at the point we're
actually initializing the display hardware. This will also ensure that
these workarounds are properly applied during display initialization on
the Xe driver, which re-uses i915's display code, but does not call
i915's gem init.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906234732.3728630-10-matthew.d.roper@intel.com
Several of the register updates that are currently done in the clock
gating init functions are actually display workarounds that should move
into the display-specific part of the code. Furthermore, some of the
registers being programmed don't even have anything to do with clock
gating at all.
Extract the display workarounds for gen11 and later platforms to a
dedicated display/intel_display_wa.c file to keep these separate from
the SOC / sgunit clock gating that we need on some platforms. The gen11
cutoff here is selected somewhat arbitrarily; this is the point where
workarounds were first assigned dedicated lineage numbers that can be
easily looked up and confirmed in the modern workaround database. It
also avoids any confusion on older platforms where the exact boundaries
between display/GT/other IP blocks wasn't as well-defined as it is
today.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907001009.3732474-2-matthew.d.roper@intel.com
The only programming that happens in gen12lp_init_clock_gating is for
display workarounds that are specific to display version 12 and are not
relevant to ADL-P's display version 13.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906234732.3728630-8-matthew.d.roper@intel.com
In the early days of i915, pretty much every platform needed to
initialize _something_ in the clock gating init functions. In some
cases the items initialized were inside the GT (and really should have
been initialized through the GT workaround infrastructure instead).
In other cases they were display programming (sometimes not even related
to "clock gating" at all!) which probably needs to move inside the
display-specific code. The number of initialization tasks that are
truly "clock gating" and don't fall within the GT or display domains is
relatively limited. Let's stop forcing future platforms to always
define a clock gating init hook.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906234732.3728630-7-matthew.d.roper@intel.com
DG2 first production steppings were C0 (for DG2-G10), B1 (for DG2-G11),
and A1 (for DG2-G12). Several workarounds that apply onto to
pre-production hardware can be dropped. Furthermore, several
workarounds that apply to all production steppings can have their
conditions simplified to no longer check the GT stepping.
v2:
- Keep Wa_16011777198 in place for now; it will be removed separately
in a follow-up patch to keep review easier.
Bspec: 44477
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-10-matthew.d.roper@intel.com
Bspec asks us to unmask "vblank to registers" in the DPRS unit.
Note that I was unable to observe any change in hardware
behviour due to this bit on HSW. But let's do this anyway
in case it matters in some cases, and the corresponding bit
on BDW is abolutely critical as without it the hardware
won't generate any vblanks whatsoever after PSR exit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-10-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Implement WaPsrDPAMaskVBlankInSRD:hsw, which makes the hardware
generate the extra vblank between link training and first frame
being transmitted. This is the same thing that's controlled by
TRANS_CHICKEN[21] on skl+ (but due to the funky double buffering
it's effectively always at the rest value after DC5 exit). So
for consistent behaviour we want every platform to generate said
vblank. BDW is already setting this up correctly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-9-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Define more of the PSR mask bits, and describe in detail
what some of them do. Even if we don't set them all from
the driver they can be very useful during PSR debugging.
Having to trawl through bspec every time to find them is
not fun, and re-reverse engineering the behaviour every
time is time consuming (even if a bit more fun than spec
trawling).
v2: Moar bits
Put the description into a comment to be easily available
v2: Fix the BDW_UNMASK_VBL_TO_REGS_IN_SRD/HSW_UNMASK_VBL_TO_REGS_IN_SRD
description
Rebase due to intel_psr_regs.h
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230411191429.29895-6-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
A lot of places include i915_reg.h implicitly via i915_irq.h, which gets
included implicitly via intel_display_trace.h. Remove the includes from
the headers, and include i915_reg.h and i915_irq.h explicitly where
needed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419094243.366821-1-jani.nikula@intel.com
Follow the contemporary naming style. Include some indentation fixes
while at it on the affected statements.
One function needs to keep using dev_priv due to implicit dev_priv usage
in a macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403122428.3526263-2-jani.nikula@intel.com
Observe that intel_pm.[ch] is now purely about clock gating, so rename
them to intel_clock_gating.[ch]. Rename the functions to
intel_clock_gating_*() to follow coding conventions.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403122428.3526263-1-jani.nikula@intel.com
