IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Update the max GSC-fw response time to match updated internal
fw specs. Because this response time is an SLA on the firmware,
not inclusive of i915->GuC->HW handoff latency, when submitting
requests to the GSC fw via intel_gsc_uc_heci_cmd_submit helpers,
start the count after the request hits the GSC command streamer.
Also, move GSC_REPLY_LATENCY_MS definition from pxp header to
intel_gsc_uc_heci_cmd_submit.h since its for any GSC HECI packet.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230917211933.1407559-2-alan.previn.teres.alexis@intel.com
After recent discussions with Mesa folks, it was requested
that we optimize i915's GET_PARAM for the PXP_STATUS without
changing the UAPI spec.
Add these additional optimizations:
- If any PXP initializatoin flow failed, then ensure that
we catch it so that we can change the returned PXP_STATUS
from "2" (i.e. 'PXP is supported but not yet ready')
to "-ENODEV". This typically should not happen and if it
does, we have a platform configuration issue.
- If a PXP arbitration session creation event failed
due to incorrect firmware version or blocking SOC fusing
or blocking BIOS configuration (platform reasons that won't
change if we retry), then reflect that blockage by also
returning -ENODEV in the GET_PARAM:PXP_STATUS.
- GET_PARAM:PXP_STATUS should not wait at all if PXP is
supported but non-i915 dependencies (component-driver /
firmware) we are still pending to complete the init flows.
In this case, just return "2" immediately (i.e. 'PXP is
supported but not yet ready').
Difference from prio revs:
v3: - Rebase with latest tip that has pulled in setting the
gsc fw load to fail if proxy init fails.
v2: - Use a #define for the default readiness timeout (Vivaik).
- Improve comments around the failing of proxy-init.
v1: - Change the commit msg style to be imperative. (Jani)
- Rename timeout to timeout_ms. (Jani)
- Fix is_fw_err_platform_config to use higher order
param (pxp) first. (Jani)
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Balasubrawmanian, Vivaik <vivaik.balasubrawmanian@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802182550.1592926-1-alan.previn.teres.alexis@intel.com
Refactor i915_coherent_map_type to be GT-centric rather than
device-centric. Each GT may require different coherency
handling due to hardware workarounds.
Since the function now takes a GT instead of the i915, the function is
renamed and moved to the gt folder.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801153242.2445478-3-jonathan.cavitt@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230807121957.598420-3-andi.shyti@linux.intel.com
intel_gsc_uc_fw_proxy_init_done is used by a few code paths
and usages. However, certain paths need a wakeref while others
can't take a wakeref such as from the runtime_pm_resume callstack.
Add a param into this helper to allow callers to direct whether
to take the wakeref or not. This resolves the following bug:
INFO: task sh:2607 blocked for more than 61 seconds.
Not tainted 6.3.0-pxp-gsc-final-jun14+ #297
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:sh state:D stack:13016 pid:2607 ppid:2602 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x47b/0xe10
schedule+0x58/0xd0
rpm_resume+0x1cc/0x800
? __pfx_autoremove_wake_function+0x10/0x10
__pm_runtime_resume+0x42/0x80
__intel_runtime_pm_get+0x19/0x80 [i915]
gsc_uc_get_fw_status+0x10/0x50 [i915]
intel_gsc_uc_fw_init_done+0x9/0x20 [i915]
intel_gsc_uc_load_start+0x5b/0x130 [i915]
__uc_resume+0xa5/0x280 [i915]
intel_runtime_resume+0xd4/0x250 [i915]
? __pfx_pci_pm_runtime_resume+0x10/0x10
__rpm_callback+0x3c/0x160
Fixes: 8c33c3755b75 ("drm/i915/gsc: take a wakeref for the proxy-init-completion check")
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615211940.4061378-1-alan.previn.teres.alexis@intel.com
Before we add the second step of the MTL HuC auth (via GSC), we need to
have the ability to differentiate between them. To do so, the huc
authentication check is duplicated for GuC and GSC auth, with
GSC-enabled binaries being considered fully authenticated only after
the GSC auth step.
To report the difference between the 2 auth steps, a new case is added
to the HuC getparam. This way, the clear media driver can start
submitting before full auth, as partial auth is enough for those
workloads.
v2: fix authentication status check for DG2
v3: add a better comment at the top of the HuC file to explain the
different approaches to load and auth (John)
v4: update call to intel_huc_is_authenticated in the pxp code to check
for GSC authentication
v5: drop references to meu and esclamation mark in huc_auth print (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> #v2
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-5-daniele.ceraolospurio@intel.com
When building ARCH=i386 allmodconfig, the following warning occurs:
In file included from include/linux/device.h:15,
from include/linux/node.h:18,
from include/linux/cpu.h:17,
from include/linux/static_call.h:135,
from arch/x86/include/asm/perf_event.h:5,
from include/linux/perf_event.h:25,
from drivers/gpu/drm/i915/i915_pmu.h:11,
from drivers/gpu/drm/i915/gt/intel_engine_types.h:21,
from drivers/gpu/drm/i915/gt/intel_context_types.h:18,
from drivers/gpu/drm/i915/gem/i915_gem_context_types.h:20,
from drivers/gpu/drm/i915/i915_request.h:34,
from drivers/gpu/drm/i915/i915_active.h:13,
from drivers/gpu/drm/i915/gt/intel_context.h:13,
from drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:8:
drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c: In function 'gsccs_send_message':
include/drm/drm_print.h:456:39: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__)
| ^~~~~~~~
include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap'
110 | _p_func(dev, fmt, ##__VA_ARGS__); \
| ^~~
include/linux/dev_printk.h:146:61: note: in expansion of macro 'dev_fmt'
146 | dev_printk_index_wrap(_dev_warn, KERN_WARNING, dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~
include/drm/drm_print.h:456:9: note: in expansion of macro 'dev_warn'
456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__)
| ^~~~
include/drm/drm_print.h:466:9: note: in expansion of macro '__drm_printk'
466 | __drm_printk((drm), warn,, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~
drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:146:17: note: in expansion of macro 'drm_warn'
146 | drm_warn(&i915->drm, "caller with insufficient PXP reply size %u (%ld)\n",
| ^~~~~~~~
cc1: all warnings being treated as errors
Use the '%zu' format specifier, as the variable is a 'size_t'.
Fixes: dc9ac125d81f ("drm/i915/pxp: Add GSC-CS backend to send GSC fw messages")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-pxp-size_t-wformat-v1-1-9631081e2e5b@kernel.org
On legacy platforms, KCR HW enabling is done at the time the mei
component interface is bound. It's also disabled during unbind.
However, for MTL onwards, we don't depend on a tee component
to start sending GSC-CS firmware messages.
Thus, immediately enable (or disable) KCR HW on PXP's init,
fini and resume.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-8-alan.previn.teres.alexis@intel.com
Add MTL's function for ARB session creation using PXP firmware
version 4.3 ABI structure format.
While relooking at the ARB session creation flow in intel_pxp_start,
let's address missing UAPI documentation. Without actually changing
backward compatible behavior, update i915's drm-uapi comments
that describe the possible error values when creating a context
with I915_CONTEXT_PARAM_PROTECTED_CONTENT:
Since the first merge of PXP support on ADL, i915 returns -ENXIO
if a dependency such as firmware or component driver was yet to
be loaded or returns -EIO if the creation attempt failed when
requested by the PXP firmware (specific firmware error responses
are reported in dmesg).
Add MTL's function for ARB session invalidation but this
reuses PXP firmware version 4.2 ABI structure format.
For both cases, in the back-end gsccs functions for sending messages
to the firmware inspect the GSC-CS-Mem-Header's pending-bit which
means the GSC firmware is busy and we should retry.
Given the last hw requirement, lets also update functions in
front-end layer that wait for session creation or teardown
completion to use new worst case timeout periods.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-6-alan.previn.teres.alexis@intel.com
Add GSC engine based method for sending PXP firmware packets
to the GSC firmware for MTL (and future) products.
Use the newly added helpers to populate the GSC-CS memory
header and send the message packet to the FW by dispatching
the GSC_HECI_CMD_PKT instruction on the GSC engine.
We use non-priveleged batches for submission to GSC engine
which require two buffers for the request:
- a buffer for the HECI packet that contains PXP FW commands
- a batch-buffer that contains the engine instruction for
sending the HECI packet to the GSC firmware.
Thus, add the allocation and freeing of these buffers in gsccs
init and fini.
The GSC-fw may reply to commands with a SUCCESS but with an
additional pending-bit set in the reply packet. This bit
means the GSC-FW is currently busy and the caller needs to
try again with the gsc_message_handle the fw returned. Thus,
add a wrapper to continuously retry send_message while
replaying the gsc_message_handle. Retries need to follow the
arch-spec count and delay until GSC-FW replies with the real
SUCCESS or timeout after that spec'd delay.
The GSC-fw requires a non-zero host_session_handle provided
by the caller to enable gsc_message_handle tracking. Thus,
allocate the host_session_handle at init and destroy it
at fini (the latter requiring an FYI to the gsc-firmware).
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-5-alan.previn.teres.alexis@intel.com
For MTL, the PXP back-end transport uses the GSC engine to submit
HECI packets through the HW to the GSC firmware for PXP arb
session management. This submission uses a non-priveleged
batch buffer, a buffer for the command packet and of course
a context targeting the GSC-CS.
Thus for MTL, we need to allocate and free a set of execution
submission resources for the management of the arbitration session.
Lets start with the context creation first since that object and
its usage is very straight-forward. We'll add the buffer allocation
and freeing later when we introduce the gsccs' send-message function.
Do this one time allocation of gsccs specific resources in
a new gsccs source file with intel_pxp_gsccs_init / fini functions
and hook them up from the PXP front-end.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-2-alan.previn.teres.alexis@intel.com
