IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The whitelist-based approach for preventing older WMI drivers from
being instantiated multiple times has many drawbacks:
- uses cannot see all available WMI devices (if not whitelisted)
- whitelisting a WMI driver requires changes in the WMI driver core
- maintenance burden for driver and subsystem developers
Since the WMI driver core already takes care that older WMI drivers
are not being instantiated multiple times, remove the now redundant
whitelist.
Tested on a ASUS Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240226193557.2888-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Many older WMI drivers cannot be instantiated multiple times for
two reasons:
- they are using the legacy GUID-based WMI API
- they are singletons (with global state)
Prevent such WMI drivers from binding to WMI devices with a duplicated
GUID, as this would mean that the WMI driver will be instantiated at
least two times (one for the original GUID and one for the duplicated
GUID).
WMI drivers which can be instantiated multiple times can signal this
by setting a flag inside struct wmi_driver.
Tested on a ASUS Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240226193557.2888-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When matching a WMI device to a GUID used by the legacy GUID-based
API, devices with a duplicated GUID should be ignored.
Add an additional WMI device flag signaling that the GUID used by
the WMI device is also used by another WMI device. Ignore such
devices inside the match functions used by the legacy GUID-based API.
Tested on a ASUS Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240226193557.2888-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ACPI WMI specification states:
"The _WED control method is evaluated by the mapper in
response to receiving a notification from a control
method."
This means that _WED should be evaluated unconditionally even
if no WMI event consumers are present.
Some firmware implementations actually depend on this behavior
by storing the event data inside a queue which will fill up if
the WMI core stops retrieving event data items due to no
consumers being present
Fix this by always evaluating _WED even if no WMI event consumers
are present.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240219115919.16526-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If a WMI event driver has no_notify_data set, then it indicates
support for WMI events which provide no notify data, otherwise
the notify() callback expects a valid ACPI object as notify data.
However if a WMI event driver which requires notify data is bound
to a WMI event device which cannot retrieve such data due to the
_WED ACPI method being absent, then the driver will be dysfunctional
since all WMI events will be dropped due to the missing notify data.
Fix this by not allowing such WMI event drivers to bind to WMI event
devices which do not support retrieving of notify data. Also reword
the description of no_notify_data a bit.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240219115919.16526-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ACPI-WMI specification declares in the section "ACPI Control Method
Naming Conventions and Functionality for Windows 2000 Instrumentation"
that a WMxx control method takes 3 arguments: instance, method id and
argument buffer. This is also the case even when the underlying WMI
method does not have any input arguments.
So if a WMI driver evaluates a WMI method without passing an input
buffer, ACPICA will log a warning complaining that the third argument
is missing.
Prevent this by checking that a input buffer was passed, and return
an error if this was not the case.
Tested on a Asus PRIME B650-Plus.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240212185016.5494-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge tag 'platform-drivers-x86-v6.8-2' fixes into pdf86/for-next
because of WMI fixes. The WMI changes done in for-next already created
a minor conflict with the fixes and WMI is actively being improved
currently so besides resolving the current conflict, this is also to
avoid further conflicts.
When an ACPI netlink event is received by acpid, the ACPI device
class is passed as its first argument. But since the class string
is not initialized during probe, an empty string is being passed:
netlink: PNP0C14:01 000000d0 00000000
Fix this by passing a static string instead.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240130221942.2770-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The device name inside the ACPI netlink event is limited to
15 characters, so the WMI device name will get truncated.
This can be observed with kacpimon when receiving an event
from WMI device "9DBB5994-A997-11DA-B012-B622A1EF5492":
netlink: 9DBB5994-A997- 000000d0 00000000
Fix this by using the shorter device name from the ACPI
bus device instead. This still allows users to uniquely
identify the WMI device by using the notify id (0xd0).
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240121200824.2778-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When an legacy WMI event handler is removed, an WMI event could
have called the handler just before it was removed, meaning the
handler could still be running after wmi_remove_notify_handler()
returns.
Something similar could also happens when using the WMI bus, as
the WMI core might still call the notify() callback from an WMI
driver even if its remove() callback was just called.
Fix this by introducing a rw semaphore which ensures that the
event state of a WMI device does not change while the WMI core
is handling an event for it.
Tested on a Dell Inspiron 3505 and a Acer Aspire E1-731.
Fixes: 1686f54445 ("platform/x86: wmi: Incorporate acpi_install_notify_handler")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240103192707.115512-5-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Until now, legacy WMI notify handler functions where using the
wmi_block_list, which did no refcounting on the returned WMI device.
This meant that the WMI device could disappear at any moment,
potentially leading to various errors.
Fix this by using bus_find_device() which returns an actual
reference to the found WMI device.
Tested on a Dell Inspiron 3505 and a Acer Aspire E1-731.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240103192707.115512-4-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit 58f6425eb9 ("WMI: Cater for multiple events with same GUID")
allowed legacy WMI notify handlers to be installed for multiple WMI
devices with the same GUID.
However this is useless since the legacy GUID-based interface is
blacklisted from seeing WMI devices with duplicated GUIDs.
Return immediately if a suitable WMI event is found in
wmi_install/remove_notify_handler() since searching for other suitable
events is pointless.
Tested on a Dell Inspiron 3505 and a Acer Aspire E1-731.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240103192707.115512-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When wmi_install_notify_handler()/wmi_remove_notify_handler() are
unable to enable/disable the WMI device, they unconditionally return
an error to the caller.
When registering legacy WMI notify handlers, this means that the
callback remains registered despite wmi_install_notify_handler()
having returned an error.
When removing legacy WMI notify handlers, this means that the
callback is removed despite wmi_remove_notify_handler() having
returned an error.
Fix this by only warning when the WMI device could not be enabled.
This behaviour matches the bus-based WMI interface.
Tested on a Dell Inspiron 3505 and a Acer Aspire E1-731.
Fixes: 58f6425eb9 ("WMI: Cater for multiple events with same GUID")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240103192707.115512-2-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull hwmon updates from Guenter Roeck:
"New drivers:
- pmbus: Support for MPS Multi-phase mp2856/mp2857 controller
- pmbus: Support for MPS Multi-phase mp5990
- Driver for Gigabyte AORUS Waterforce AIO coolers
Added support to existing drivers:
- lm75: Support for AMS AS6200 temperature sensor
- k10temp: Support for AMD Family 19h Model 8h
- max31827: Support for max31828 and max31829
- sht3x: Support for sts3x
- Add support for WMI SMM interface, and various related improvements.
Add support for Optiplex 7000
- emc1403: Support for EMC1442
- npcm750-pwm-fan: Support for NPCM8xx
- nct6775: Add support for 2 additional fan controls
Minor improvements and bug fixes:
- gigabyte_waterforce: Mark status report as received under a spinlock
- aquacomputer_d5next: Remove unneeded CONFIG_DEBUG_FS #ifdef
- gpio-fan: Convert txt bindings to yaml
- smsc47m1: Various cleanups / improvements
- corsair-cpro: use NULL instead of 0
- hp-wmi-sensors: Fix failure to load on EliteDesk 800 G6
- tmp513: Various cleanups
- peci/dimmtemp: Bump timeout
- pc87360: Bounds check data->innr usage
- nct6775: Fix fan speed set failure in automatic mode
- ABI: sysfs-class-hwmon: document various missing attributes
- lm25066, max6650, nct6775: Use i2c_get_match_data()
- aspeed-pwm-tacho: Fix -Wstringop-overflow warning"
* tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (59 commits)
hwmon: (gigabyte_waterforce) Mark status report as received under a spinlock
hwmon: (lm75) Fix tmp112 default config
hwmon: (lm75) Add AMS AS6200 temperature sensor
dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor
hwmon: (lm75) remove now-unused include
hwmon: (pmbus) Add support for MPS Multi-phase mp2856/mp2857 controller
dt-bindings: Add MP2856/MP2857 voltage regulator device
hwmon: (aquacomputer_d5next) Remove unneeded CONFIG_DEBUG_FS #ifdef
dt-bindings: hwmon: gpio-fan: Convert txt bindings to yaml
hwmon: (k10temp) Add support for AMD Family 19h Model 8h
hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers
hwmon: (smsc47m1) Rename global platform device variable
hwmon: (smsc47m1) Simplify device registration
hwmon: (smsc47m1) Convert to platform remove callback returning void
hwmon: (smsc47m1) Mark driver struct with __refdata to prevent section mismatch
MAINTAINERS: Add maintainer for Baikal-T1 PVT hwmon driver
hwmon: (sht3x) add sts3x support
hwmon: (pmbus) Add ltc4286 driver
dt-bindings: hwmon: Add lltc ltc4286 driver bindings
hwmon: (max31827) Add custom attribute for resolution
...
Currently, the ACPI notify handler searches all WMI devices for
a matching WMI event device. This is inefficient since only WMI devices
associated with the notified ACPI device need to be searched.
Use the WMI bus device and device_for_each_child() to search for
a matching WMI event device instead.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-6-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When removing the ACPI notify/address space handlers, the WMI devices
are still active and might still depend on ACPI EC access or
WMI events.
Fix this by removing the ACPI handlers after all WMI devices
associated with an ACPI device have been removed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The design of the WMI chardev interface is broken:
- it assumes that WMI drivers are not instantiated twice
- it offers next to no abstractions, the WMI driver gets
a raw byte buffer
- it is only used by a single driver, something which is
unlikely to change
Since the only user (dell-smbios-wmi) has been migrated
to his own ioctl interface, remove it.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231210202443.646427-6-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Back merge pdx86 fixes into pdx86/for-next for further WMI work
depending on some of the fixes.
platform-drivers-x86 for v6.7-3
Highlights:
- asus-wmi: Solve i8042 filter resource handling, input, and
suspend issues
- wmi: Skip zero instance WMI blocks to avoid issues with
some laptops
- mlxbf-bootctl: Differentiate dev/production keys
- platform/surface: Correct serdev related return value to avoid
leaking errno into userspace
- Error checking fixes
The following is an automated shortlog grouped by driver:
asus-wmi:
- Change q500a_i8042_filter() into a generic i8042-filter
- disable USB0 hub on ROG Ally before suspend
- Filter Volume key presses if also reported via atkbd
- Move i8042 filter install to shared asus-wmi code
mellanox:
- Add null pointer checks for devm_kasprintf()
- Check devm_hwmon_device_register_with_groups() return value
mlxbf-bootctl:
- correctly identify secure boot with development keys
surface: aggregator:
- fix recv_buf() return value
wmi:
- Skip blocks with zero instances
Currently, WMI drivers have to use the deprecated GUID-based
interface when setting data blocks. This prevents those
drivers from fully moving away from this interface.
Provide wmidev_block_set() so drivers using wmi_set_block() can
fully migrate to the modern bus-based interface.
Tested with a custom SSDT from the Intel Slim Bootloader project.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231103182526.3524-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit fa1f68db6c ("drivers: misc: pass miscdevice pointer via
file private data"), the miscdevice stores a pointer to itself inside
filp->private_data, which means that private_data will not be NULL when
wmi_char_open() is called. This might cause memory corruption should
wmi_char_open() be unable to find its driver, something which can
happen when the associated WMI device is deleted in wmi_free_devices().
Fix the problem by using the miscdevice pointer to retrieve the WMI
device data associated with a char device using container_of(). This
also avoids wmi_char_open() picking a wrong WMI device bound to a
driver with the same name as the original driver.
Fixes: 44b6b76611 ("platform/x86: wmi: create userspace interface for drivers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When a WMI device besides the first one somehow fails to register,
retval is returned while still containing a negative error code. This
causes the ACPI device fail to probe, leaving behind zombie WMI devices
leading to various errors later.
Handle the single error path separately and return 0 unconditionally
after trying to register all WMI devices to solve the issue. Also
continue to register WMI devices even if some fail to allocate memory.
Fixes: 6ee50aaa9a ("platform/x86: wmi: Instantiate all devices before adding them")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Until now, legacy GUID-based functions where using find_guid() when
searching for WMI devices, which did no refcounting on the returned
WMI device. This meant that the WMI device could disappear at any
moment, potentially leading to various errors. Fix this by using
bus_find_device() which returns an actual reference to the found
WMI device.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Many aggregate WMI drivers do not use -EPROBE_DEFER when they
cannot find a WMI device during probe, instead they require
all WMI devices associated with an platform device to become
available at once. This is currently achieved by adding those
WMI devices to the wmi_block_list before they are registered,
which is then used by the deprecated GUID-based functions to
search for WMI devices.
Replace this approach with a device link which defers probing
of the WMI device until the associated platform device has finished
probing (and has registered all WMI devices). New aggregate WMI
drivers should not rely on this behaviour.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The while-loop may break on one of the two conditions, either ID string
is empty or GUID matches. The second one, may never be reached if the
parsed string is not correct GUID. In such a case the loop will never
advance to check the next ID.
Break possible infinite loop by factoring out guid_parse_and_compare()
helper which may be moved to the generic header for everyone later on
and preventing from similar mistake in the future.
Interestingly that firstly it appeared when WMI was turned into a bus
driver, but later when duplicated GUIDs were checked, the while-loop
has been replaced by for-loop and hence no mistake made again.
Fixes: a48e23385f ("platform/x86: wmi: add context pointer field to struct wmi_device_id")
Fixes: 844af950da ("platform/x86: wmi: Turn WMI into a bus driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230621151155.78279-1-andriy.shevchenko@linux.intel.com
Tested-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, the WMI driver core knows how many instances of a given
WMI object exist, but WMI drivers cannot access this information.
At the same time, some current and upcoming WMI drivers want to
have access to this information. Add wmi_instance_count() and
wmidev_instance_count() to allow WMI drivers to get the number of
WMI object instances.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230430203153.5587-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The WMI driver core supports a more mordern bus-based interface for
interacting with WMI devices. The older GUID-based interface depends
on each WMI GUID and notification id being unique on a given system,
which turned out is not the case.
Mark the older interface as deprecated since new WMI drivers should
use the bus-based interface to avoid this issues.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230424222939.208137-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-29-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The dell-wmi-ddv driver adds support for reading
the current temperature and ePPID of ACPI batteries
on supported Dell machines.
Since the WMI interface used by this driver does not
do any input validation and thus cannot be used for probing,
the driver depends on the ACPI battery extension machanism
to discover batteries.
The driver also supports a debugfs interface for retrieving
buffers containing fan and thermal sensor information.
Since the meaing of the content of those buffers is currently
unknown, the interface is meant for reverse-engineering and
will likely be replaced with an hwmon interface once the
meaning has been understood.
The driver was tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220927204521.601887-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
