IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Use ARRAY_SIZE to get array length.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2725:16-17: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer insert ras blocks into ras_list if it already exists in ras_list.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Move xgmi special error inject function from amdgpu_ras.c to xgmi block.
2. Support to use psp_ras_trigger_error as default error inject function in amdgpu_ras.c. If .ras_error_inject isn't defined in ras block, default error inject function will take effect.
v2: squash in warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify sdma block to fit for the unified ras block data and ops.
2.Change amdgpu_sdma_ras_funcs to amdgpu_sdma_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of sdma ras variable so that sdma ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register sdma ras block into amdgpu device ras block link list.
5.Remove the redundant code about sdma in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of sdma versions. If .ras_late_init and .ras_fini had been defined by the selected sdma version, the defined functions will take effect; if not defined, default fill them with amdgpu_sdma_ras_late_init and amdgpu_sdma_ras_fini.
v2: squash in warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify umc block to fit for the unified ras block data and ops.
2.Change amdgpu_umc_ras_funcs to amdgpu_umc_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of umc ras variable so that umc ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register umc ras block into amdgpu device ras block link list.
5.Remove the redundant code about umc in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of umc versions. If .ras_late_init and .ras_fini had been defined by the selected umc version, the defined functions will take effect; if not defined, default fill them with amdgpu_umc_ras_late_init and amdgpu_umc_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify nbio block to fit for the unified ras block data and ops.
2.Change amdgpu_nbio_ras_funcs to amdgpu_nbio_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of mmhub ras variable so that nbio ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register nbio ras block into amdgpu device ras block link list.
5.Remove the redundant code about nbio in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify mmhub block to fit for the unified ras block data and ops.
2.Change amdgpu_mmhub_ras_funcs to amdgpu_mmhub_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of mmhub ras variable so that mmhub ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register mmhub ras block into amdgpu device ras block link list. 5.Remove the redundant code about mmhub in amdgpu_ras.c after using the unified ras block.
5.Remove the redundant code about mmhub in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of mmhub versions. If .ras_late_init and .ras_fini had been defined by the selected mmhub version, the defined functions will take effect; if not defined, default fill them with amdgpu_mmhub_ras_late_init and amdgpu_mmhub_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify hdp block to fit for the unified ras block data and ops.
2.Change amdgpu_hdp_ras_funcs to amdgpu_hdp_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of hdp ras variable so that hdp ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register hdp ras block into amdgpu device ras block link list.
5.Remove the redundant code about hdp in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify gmc block to fit for the unified ras block data and ops.
2.Change amdgpu_xgmi_ras_funcs to amdgpu_xgmi_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of gmc ras variable so that gmc ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register gmc ras block into amdgpu device ras block link list.
5.Remove the redundant code about gmc in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify gfx block to fit for the unified ras block data and ops.
2.Change amdgpu_gfx_ras_funcs to amdgpu_gfx_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of gfx ras variable so that gfx ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register gfx ras block into amdgpu device ras block link list.
5.Remove the redundant code about gfx in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of gfx versions. If .ras_late_init and .ras_fini had been defined by the selected gfx version, the defined functions will take effect; if not defined, default fill with amdgpu_gfx_ras_late_init and amdgpu_gfx_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify the compilation failed problem when other ras blocks' .h include amdgpu_ras.h.
v2: squash in forward declaration warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define unified ops interface for each block.
2. Add ras_block_match function pointer in ops interface, each ras block can customize specail match function to identify itself.
3. Add amdgpu_ras_block_match_default new function. If a ras block doesn't define .ras_block_match, default execute amdgpu_ras_block_match_default to identify this ras block.
4. Define unified basic ras block data for each ras block.
5. Create dedicated amdgpu device ras block link list to manage all of the ras blocks.
6. Add amdgpu_ras_register_ras_block new function interface for each ras block to register itself to ras controlling block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those implementation details(whether swsmu supported, some ppt_funcs supported,
accessing internal statistics ...)should be kept internally. It's not a good
practice and even error prone to expose implementation details.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not allow exported amdgpu_vram_mgr_*() to accept
any ttm_resource_manager pointer. Also there is no need
to force other module to call a ttm function just to
eventually call vram_mgr functions.
v2: pass adev's vram_mgr instead of adev
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Memory of err_data should be cleaned before usage
when there're multiple entry in ras ih.
Otherwise garbage data from last loop will be used.
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement
-----BEGIN PGP SIGNATURE-----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=MByd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights are support for privacy screens found in new laptops, a
bunch of nomodeset refactoring, and i915 enables ADL-P systems by
default, while starting to add RPL-S support.
vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.
Lots of internal refactorings around dma reservations, and lots of
driver refactoring as well.
Summary:
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement"
* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
drm/amdgpu: no DC support for headless chips
drm/amd/display: fix dereference before NULL check
drm/amdgpu: always reset the asic in suspend (v2)
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
drm/amdgpu: fix runpm documentation
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
drm/amdgpu: save error count in RAS poison handler
drm/amdgpu: drop redundant semicolon
drm/amd/display: get and restore link res map
drm/amd/display: support dynamic HPO DP link encoder allocation
drm/amd/display: access hpo dp link encoder only through link resource
drm/amd/display: populate link res in both detection and validation
drm/amd/display: define link res and make it accessible to all link interfaces
drm/amd/display: 3.2.167
drm/amd/display: [FW Promotion] Release 0.0.98
drm/amd/display: Undo ODM combine
drm/amd/display: Add reg defs for DCN303
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Set optimize_pwr_state for DCN31
...
AMD systems currently lay out MCA bank types such that the type of bank
number "i" is either the same across all CPUs or is Reserved/Read-as-Zero.
For example:
Bank # | CPUx | CPUy
0 LS LS
1 RAZ UMC
2 CS CS
3 SMU RAZ
Future AMD systems will lay out MCA bank types such that the type of
bank number "i" may be different across CPUs.
For example:
Bank # | CPUx | CPUy
0 LS LS
1 RAZ UMC
2 CS NBIO
3 SMU RAZ
Change the structures that cache MCA bank types to be per-CPU and update
smca_get_bank_type() to handle this change.
Move some SMCA-specific structures to amd.c from mce.h, since they no
longer need to be global.
Break out the "count" for bank types from struct smca_hwid, since this
should provide a per-CPU count rather than a system-wide count.
Apply the "const" qualifier to the struct smca_hwid_mcatypes array. The
values in this array should not change at runtime.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211216162905.4132657-3-yazen.ghannam@amd.com
This commit fixes the compile-time warning below:
warning: no previous prototype for ‘amdgpu_ras_mca_query_error_status’
[-Wmissing-prototypes]
Changes since v1:
- As suggested by Alexander Deucher:
1. Make function static instead of adding prototype.
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes various warnings relating to erroneous docstring syntax, of
which some are listed below:
warning: Function parameter or member 'adev' not described in
'amdgpu_atomfirmware_ras_rom_addr'
...
warning: expecting prototype for amdgpu_atpx_validate_functions().
Prototype was for amdgpu_atpx_validate() instead
...
warning: Excess function parameter 'mem' description in 'amdgpu_preempt_mgr_new'
...
warning: Cannot understand * @kfd_get_cu_occupancy - Collect number of
waves in-flight on this device
...
warning: This comment starts with '/**', but isn't a kernel-doc
comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RAS poison mode is enabled by default on the platform.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
skip get ecc info for aldebarn through check ip version
do not affect other asic type
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is a workaround due to get ecc info failed during gpu recovery
[ 700.236122] amdgpu 0000:09:00.0: amdgpu: Failed to export SMU ecc table!
[ 700.236128] amdgpu 0000:09:00.0: amdgpu: GPU reset begin!
[ 704.331171] amdgpu: qcm fence wait loop timeout expired
[ 704.331194] amdgpu: The cp might be in an unrecoverable state due to an unsuccessful queues preemption
[ 704.332445] amdgpu 0000:09:00.0: amdgpu: GPU reset begin!
[ 704.332448] amdgpu 0000:09:00.0: amdgpu: Bailing on TDR for s_job:ffffffffffffffff, as another already in progress
[ 704.332456] amdgpu: Pasid 0x8000 destroy queue 0 failed, ret -62
[ 710.360924] amdgpu 0000:09:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000013 SMN_C2PMSG_82:0x00000007
[ 710.360964] amdgpu 0000:09:00.0: amdgpu: Failed to disable smu features.
[ 710.361002] amdgpu 0000:09:00.0: amdgpu: Fail to disable dpm features!
[ 710.361014] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
still need call ras_disable_all_featrures to handle
ras initilization failure case.
Function amdgpu_device_fini_hw is called before amdgpu_device_fini_sw,
so ras ta will unload before send ras disable command, ras dsiable operation
must before hw fini.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if smu support ECCTABLE, driver can message smu to get ecc_table
then query umc error info from ECCTABLE
v2:
optimize source code makes logical more reasonable
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix race condition failure during UMC UE injection.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode2 reset, the GPU is temporarily removed from the
mgpu_info list. As a result, page retirement fails because it
cannot find the GPU in the GPU list.
To fix this, create our own list of GPUs that support MCE notifier
based page retirement and use that list to check if the UMC error
occurred on a GPU that supports MCE notifier based page retirement.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Aldebaran, GPU driver will handle bad page retirement
for GPU memory even though UMC is host managed. As a result,
register a bad page retirement handler on the mce notifier
chain to retire bad pages on Aldebaran.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clear error count when persistant harvesting is not enabled
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In ras poison mode, umc uncorrectable error will be ignored until
the corrupted data consumed by another ras module (such as gfx, sdma).
v2: update the debug message and replace dev_warn with dev_info.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add RAS poison supported flag and tell PSP RAS TA about the info.
v2: rename poison mode to poison supported, we can also disable poison
mode even we support it.
print value of poison supported if ras feature enablement fails.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All code paths under the EAGAIN path in RAS late init are unused.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update RAS infrastructure to support RAS query for MCA subblocks
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added trigger error support for MP0/MP1/MPIO blocks
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add MPIO to RAS block
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete ras_if->name in the RAS ctx structure and remove related lines.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_ras_query_error_count() return an error
if the device doesn't support RAS. This prevents
that function from having to always set the values
of the integer pointers (if set), and thus
prevents function side effects--always to have to
set values of integers if integer pointers set,
regardless of whether RAS is supported or
not--with this change this side effect is
mitigated.
Also, if no pointers are set, don't count, since
we've no way of reporting the counts.
Also, give this function a kernel-doc.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Reported-by: Tom Rix <trix@redhat.com>
Fixes: a46751fbcde505 ("drm/amdgpu: Fix RAS function interface")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Debugfs RAS EEPROM files are available when
the ASIC supports RAS, and when the debugfs is
enabled, an also when "ras_enable" module
parameter is set to 0. However in this case,
we get a kernel oops when accessing some of
the "ras_..." controls in debugfs. The reason
for this is that struct amdgpu_ras::adev is
unset. This commit sets it, thus enabling access
to those facilities. Note that this facilitates
EEPROM access and not necessarily RAS features or
functionality.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split functionality between read and write, which
simplifies the code and exposes areas of
optimization and more or less complexity, and take
advantage of that.
Read and write the table in one go; use a separate
stage to decode or encode the data, as opposed to
on the fly, which keeps the I2C bus busy. Use a
single read/write to read/write the table or at
most two if the number of records we're
reading/writing wraps around.
Check the check-sum of a table in EEPROM on init.
Update the checksum at the same time as when
updating the table header signature, when the
threshold was increased on boot.
Take advantage of arithmetic modulo 256, that is,
use a byte!, to greatly simplify checksum
arithmetic.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Qualify with "ras_". Use kernel's own--don't
redefine your own.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS_MAX_RECORD_NUM may mean the maximum record
number, as in the maximum house number on your
street, or it may mean the maximum number of
records, as in the count of records, which is also
a number. To make this distinction whether the
number is ordinal (index) or cardinal (count),
rename this macro to RAS_MAX_RECORD_COUNT.
This makes it easy to understand what it refers
to, especially when we compute quantities such as,
how many records do we have left in the table,
especially when there are so many other numbers,
quantities and numerical macros around.
Also rename the long,
amdgpu_ras_eeprom_get_record_max_length() to the
more succinct and clear,
amdgpu_ras_eeprom_max_record_count().
When computing the threshold, which also deals
with counts, i.e. "how many", use cardinal
"max_eeprom_records_count", than the quantitative
"max_eeprom_records_len".
Simplify the logic here and there, as well.
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The low level EEPROM write method, doesn't return
1, but the number of bytes written. Thus do not
compare to 1, instead, compare to greater than 0
for success.
Other cleanup: if the lower layers returned
-errno, then return that, as opposed to
overwriting the error code with one-fits-all
-EINVAL. For instance, some return -EAGAIN.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wrap amdgpu_ras_eeprom_xfer(..., bool write),
into amdgpu_ras_eeprom_read() and
amdgpu_ras_eeprom_write(), as that makes reading
and understanding the code clearer.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
