IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The NEXT-C-SID mechanism described in [1] offers the possibility of
encoding several SRv6 segments within a single 128 bit SID address. Such
a SID address is called a Compressed SID (C-SID) container. In this way,
the length of the SID List can be drastically reduced.
A SID instantiated with the NEXT-C-SID flavor considers an IPv6 address
logically structured in three main blocks: i) Locator-Block; ii)
Locator-Node Function; iii) Argument.
C-SID container
+------------------------------------------------------------------+
| Locator-Block |Loc-Node| Argument |
| |Function| |
+------------------------------------------------------------------+
<--------- B -----------> <- NF -> <------------- A --------------->
(i) The Locator-Block can be any IPv6 prefix available to the provider;
(ii) The Locator-Node Function represents the node and the function to
be triggered when a packet is received on the node;
(iii) The Argument carries the remaining C-SIDs in the current C-SID
container.
This patch leverages the NEXT-C-SID mechanism previously introduced in the
Linux SRv6 subsystem [2] to support SID compression capabilities in the
SRv6 End.X behavior [3].
An SRv6 End.X behavior with NEXT-C-SID flavor works as an End.X behavior
but it is capable of processing the compressed SID List encoded in C-SID
containers.
An SRv6 End.X behavior with NEXT-C-SID flavor can be configured to support
user-provided Locator-Block and Locator-Node Function lengths. In this
implementation, such lengths must be evenly divisible by 8 (i.e. must be
byte-aligned), otherwise the kernel informs the user about invalid
values with a meaningful error code and message through netlink_ext_ack.
If Locator-Block and/or Locator-Node Function lengths are not provided
by the user during configuration of an SRv6 End.X behavior instance with
NEXT-C-SID flavor, the kernel will choose their default values i.e.,
32-bit Locator-Block and 16-bit Locator-Node Function.
[1] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
[2] - https://lore.kernel.org/all/20220912171619.16943-1-andrea.mayer@uniroma2.it/
[3] - https://datatracker.ietf.org/doc/html/rfc8986#name-endx-l3-cross-connect
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230812180926.16689-2-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We had a number of bugs in the past because developers forgot
to fully test dumps, which pass NULL as info to .prepare_data.
.prepare_data implementations would try to access info->extack
leading to a null-deref.
Now that dumps and notifications can access struct genl_info
we can pass it in, and remove the info null checks.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # pause
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Having family in struct genl_info is quite useful. It cuts
down the number of arguments which need to be passed to
helpers which already take struct genl_info.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since dumps carry struct genl_info now, use the attrs pointer
from genl_info and remove the one in struct genl_dumpit_info.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink GET implementations must currently juggle struct genl_info
and struct netlink_callback, depending on whether they were called
from doit or dumpit.
Add genl_info to the dump state and populate the fields.
This way implementations can simply pass struct genl_info around.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only three families use info->userhdr today and going forward
we discourage using fixed headers in new families.
So having the pointer to user header in struct genl_info
is an overkill. Compute the header pointer at runtime.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct netlink_callback has a const nlh pointer, make the
pointer in struct genl_info const as well, to make copying
between the two easier.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers which take/release the genl mutex based
on family->parallel_ops. Remove the separation between
handling of ops in locked and parallel families.
Future patches would make the duplicated code grow even more.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow user to pass port index for health reporter dump request.
Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-14-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend per-instance dump command definitions to accept instance
attributes. Allow parsing of devlink handle attributes so they could
be used for instance selection.
Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-12-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For SFs, one devlink instance per SF is created. There might be
thousands of these on a single host. When a user needs to know port
handle for specific SF, he needs to dump all devlink ports on the host
which does not scale good.
Allow user to pass devlink handle attributes alongside the dump command
and dump only objects which are under selected devlink instance.
Example:
$ devlink port show
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
$ devlink port show auxiliary/mlx5_core.eth.0
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
$ devlink port show auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-11-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the commands are already defined in split ops, remove them
from small ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the duplicate temporary netlink callback prototype as the
generated ones are already in place.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the definitions for the commands that do per-instance dump
and re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to easily set NLM_F_DUMP_FILTERED for partial dumps, pass the
flags as an arg of dump_one() callback. Currently, it is always
NLM_F_MULTI.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-7-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce dumpit callbacks for generated split ops. Have them
as a thin wrapper around iteration function and allow to pass dump_one()
function pointer directly without need to store in devlink_cmd structs.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-6-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename netlink doit callback functions for the commands that do
implement per-instance dump to match the generated names that are going
to be introduce in the follow-up patch.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-5-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define port handling helpers what don't rely on internal_flags.
Have __devlink_nl_pre_doit() to accept the flags as a function arg and
make devlink_nl_pre_doit() a wrapper helper function calling it.
Introduce new helpers devlink_nl_pre_doit_port() and
devlink_nl_pre_doit_port_optional() to be used by split ops in follow-up
patch.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No need to give the rate any special treatment in netlink attributes
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.
Remove DEVLINK_NL_FLAG_NEED_RATE*, make pre_doit() callback simpler
by moving the rate attributes parsing to rate_*_doit() ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No need to give the linecards any special treatment in netlink attribute
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.
Remove DEVLINK_NL_FLAG_NEED_LINECARD, make pre_doit() callback simpler
by moving the linecard attribute parsing to linecard_[gs]et_doit() ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use drop reasons from include/net/dropreason-core.h when a reasonable
candidate exists.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By using an independent drop reason it makes it easy to distinguish
between QoS-triggered or flow-triggered drop.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Eric Garver <eric@garver.life>
This adds an explicit drop action. This is used by OVS to drop packets
for which it cannot determine what to do. An explicit action in the
kernel allows passing the reason _why_ the packet is being dropped or
zero to indicate no particular error happened (i.e: OVS intentionally
dropped the packet).
Since the error codes coming from userspace mean nothing for the kernel,
we squash all of them into only two drop reasons:
- OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed
- OVS_DROP_EXPLICIT to indicate a zero value was passed (no error)
e.g. trace all OVS dropped skbs
# perf trace -e skb:kfree_skb --filter="reason >= 0x30000"
[..]
106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \
location:0xffffffffc0d9b462, protocol: 2048, reason: 196611)
reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT)
Also, this patch allows ovs-dpctl.py to add explicit drop actions as:
"drop" -> implicit empty-action drop
"drop(0)" -> explicit non-error action drop
"drop(42)" -> explicit error action drop
Signed-off-by: Eric Garver <eric@garver.life>
Co-developed-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a drop reason for packets that are dropped because an action
returns a non-zero error code.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a new drop reason subsystem for openvswitch and add the first
drop reason to represent last-action drops.
Last-action drops happen when a flow has an empty action list or there
is no action that consumes the packet (output, userspace, recirc, etc).
It is the most common way in which OVS drops packets.
Implementation-wise, most of these skb-consuming actions already call
"consume_skb" internally and return directly from within the
do_execute_actions() loop so with minimal changes we can assume that
any skb that exits the loop normally is a packet drop.
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__mptcp_init_sock() always returns 0 because mptcp_init_sock() used
to return the value directly.
But after commit 18b683bff89d ("mptcp: queue data for mptcp level
retransmission"), __mptcp_init_sock() need not return value anymore.
Let's remove the unnecessary test for __mptcp_init_sock() and make
it return void.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Such field is now unused just as a flag to control the first subflow
deletion at close() time. Introduce a new bit flag for that and finally
drop the mentioned field.
As an intended side effect, now the first subflow sock is not freed
before close() even for passive sockets. The msk has no open/active
subflows if the first one is closed and the subflow list is singular,
update accordingly the state check in mptcp_stream_accept().
Among other benefits, the subflow removal, reduces the amount of memory
used on the client side for each mptcp connection, allows passive sockets
to go through successful accept()/disconnect()/connect() and makes return
error code consistent for failing both passive and active sockets.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/290
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch the __mptcp_nmpc_socket helper is used
only to ensure that the MPTCP socket is a suitable status - that
is, the mptcp capable handshake is not started yet.
Change the return value to the relevant subflow sock, to finally
remove the last references to first subflow socket in the MPTCP stack.
As a bonus, we can get rid of a few local variables in different
functions.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is one of the few remaining spots actually manipulating the
first subflow socket. We can leverage the recently introduced
inet helpers to get rid of ssock there.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp sockopt infrastructure unneedly uses the first subflow
socket struct in a few spots. We are going to remove such field
soon, so use directly the first subflow sock instead.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are going to remove the first subflow socket soon, so avoid
the additional indirection at accept() time. Instead access
directly the first subflow sock, and update mptcp_accept() to
operate on it. This allows dropping a duplicated check in
mptcp_accept().
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are going to remove the first subflow socket soon, so avoid
the additional indirection at poll() time. Instead access
directly the first subflow sock.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are going to remove the first subflow socket soon, so avoid
the additional indirection via at listen() time. Instead call
directly the recently introduced helper on the first subflow sock.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp protocol maintains an additional socket just to easily
invoke a few stream operations on the first subflow. One of them
is inet_listen().
Factor out an helper operating directly on the (locked) struct sock,
to allow get rid of the above dependency in the next patch without
duplicating the existing code.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are going to remove the first subflow socket soon, so avoid
the additional indirection via at bind() time. Instead call directly
the recently introduced helpers on the first subflow sock.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp protocol maintains an additional socket just to easily
invoke a few stream operations on the first subflow. One of
them is bind().
Factor out the helpers operating directly on the struct sock, to
allow get rid of the above dependency in the next patch without
duplicating the existing code.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are going to remove the first subflow socket soon, so avoid
accessing it in mptcp_get_port(). Instead, access directly the
first subflow sock.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp protocol maintains an additional socket just to easily
invoke a few stream operations on the first subflow. One of them is
__inet_stream_connect().
We are going to remove the first subflow socket soon, so avoid
the additional indirection via at connect time, calling directly
into the sock-level connect() ops.
The sk-level connect never return -EINPROGRESS, cleanup the error
path accordingly. Additionally, the ssk status on error is always
TCP_CLOSE. Avoid unneeded access to the subflow sk state.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP protocol currently clears the msk token both at connect() and
listen() time. That is needed to deal with failing connect() calls that
can create a new token while leaving the sk in TCP_CLOSE,SS_UNCONNECTED
status and thus allowing later connect() and/or listen() calls.
Let's deal with such failures explicitly, cleaning the token in a timely
manner and avoid the confusing early mptcp_token_destroy().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add new VID/PID for Mediatek MT7922
- Add support multiple BIS/BIG
- Add support for Intel Gale Peak
- Add support for Qualcomm WCN3988
- Add support for BT_PKT_STATUS for ISO sockets
- Various fixes for experimental ISO support
- Load FW v2 for RTL8852C
- Add support for NXP AW693 chipset
- Add support for Mediatek MT2925
-----BEGIN PGP SIGNATURE-----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=akZ8
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2023-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
bluetooth-next pull request for net-next:
- Add new VID/PID for Mediatek MT7922
- Add support multiple BIS/BIG
- Add support for Intel Gale Peak
- Add support for Qualcomm WCN3988
- Add support for BT_PKT_STATUS for ISO sockets
- Various fixes for experimental ISO support
- Load FW v2 for RTL8852C
- Add support for NXP AW693 chipset
- Add support for Mediatek MT2925
Commit 39de8281791c ("RDS: Main header file") declared but never implemented
rds_trans_init() and rds_trans_exit(), remove it.
Commit d37c9359056f ("RDS: Move loop-only function to loop.c") removed the
implementation rds_message_inc_free() but not the declaration.
Since commit 55b7ed0b582f ("RDS: Common RDMA transport code")
rds_rdma_conn_connect() is never implemented and used.
rds_tcp_map_seq() is never implemented and used since
commit 70041088e3b9 ("RDS: Add TCP transport to RDS").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_diag_put_flags(), netlink_setsockopt(), netlink_getsockopt()
and others use nlk->flags without correct locking.
Use set_bit(), clear_bit(), test_bit(), assign_bit() to remove
data-races.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The debug message in tcp_retransmit_timer() is slightly wrong, because
they could be printed even if we did not receive a new ACK packet from
the remote peer.
Change it to probing zero-window, as it is a expected case now. The
description may be not correct.
Adding the duration since the last ACK we received, and the duration of
the retransmission, which are useful for debugging.
And the message now like this:
Probing zero-window on 127.0.0.1:9999/46946, seq=3737778959:3737791503, recv 209ms ago, lasting 209ms
Probing zero-window on 127.0.0.1:9999/46946, seq=3737778959:3737791503, recv 404ms ago, lasting 408ms
Probing zero-window on 127.0.0.1:9999/46946, seq=3737778959:3737791503, recv 812ms ago, lasting 1224ms
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In tcp_retransmit_timer(), a window shrunk connection will be regarded
as timeout if 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX'. This is not
right all the time.
The retransmits will become zero-window probes in tcp_retransmit_timer()
if the 'snd_wnd==0'. Therefore, the icsk->icsk_rto will come up to
TCP_RTO_MAX sooner or later.
However, the timer can be delayed and be triggered after 122877ms, not
TCP_RTO_MAX, as I tested.
Therefore, 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX' is always true
once the RTO come up to TCP_RTO_MAX, and the socket will die.
Fix this by replacing the 'tcp_jiffies32' with '(u32)icsk->icsk_timeout',
which is exact the timestamp of the timeout.
However, "tp->rcv_tstamp" can restart from idle, then tp->rcv_tstamp
could already be a long time (minutes or hours) in the past even on the
first RTO. So we double check the timeout with the duration of the
retransmission.
Meanwhile, making "2 * TCP_RTO_MAX" as the timeout to avoid the socket
dying too soon.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/CADxym3YyMiO+zMD4zj03YPM3FBi-1LHi6gSD2XT8pyAMM096pg@mail.gmail.com/
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fow now, an ACK can update the window in following case, according to
the tcp_may_update_window():
1. the ACK acknowledged new data
2. the ACK has new data
3. the ACK expand the window and the seq of it is valid
Now, we allow the ACK update the window if the window is 0, and the
seq/ack of it is valid. This is for the case that the receiver replies
an zero-window ACK when it is under memory stress and can't queue the new
data.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For now, skb will be dropped when no memory, which makes client keep
retrans util timeout and it's not friendly to the users.
In this patch, we reply an ACK with zero-window in this case to update
the snd_wnd of the sender to 0. Therefore, the sender won't timeout the
connection and will probe the zero-window with the retransmits.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CIS/CIG ids of ISO connections are defined only when the connection
is unicast.
Fix the lookup functions to check for unicast first. Ensure CIG/CIS
IDs have valid value also in state BT_OPEN.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
