IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Errors can potentially occur in the "processing" of PSP commands or
commands can be processed successfully but still return an error code in
the header.
This second case was being discarded because PSP communication worked but
the command returned an error code in the payload header.
Capture both cases and return them to the caller as -EIO for the caller
to investigate. The caller can detect the latter by looking at
`req->header->status`.
Reported-and-tested-by: Tim Van Patten <timvp@google.com>
Fixes: 7ccc4f4e2e50 ("crypto: ccp - Add support for an interface for platform features")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During the PCI AER system's error recovery process, the kernel driver
may encounter a race condition with freeing the reset_data structure's
memory. If the device restart will take more than 10 seconds the function
scheduling that restart will exit due to a timeout, and the reset_data
structure will be freed. However, this data structure is used for
completion notification after the restart is completed, which leads
to a UAF bug.
This results in a KFENCE bug notice.
BUG: KFENCE: use-after-free read in adf_device_reset_worker+0x38/0xa0 [intel_qat]
Use-after-free read at 0x00000000bc56fddf (in kfence-#142):
adf_device_reset_worker+0x38/0xa0 [intel_qat]
process_one_work+0x173/0x340
To resolve this race condition, the memory associated to the container
of the work_struct is freed on the worker if the timeout expired,
otherwise on the function that schedules the worker.
The timeout detection can be done by checking if the caller is
still waiting for completion or not by using completion_done() function.
Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The implementation of the Rate Limiting (RL) feature includes the cleanup
of all SLAs during device shutdown. For each SLA, the firmware is notified
of the removal through an admin message, the data structures that take
into account the budgets are updated and the memory is freed.
However, this explicit cleanup is not necessary as (1) the device is
reset, and the firmware state is lost and (2) all RL data structures
are freed anyway.
In addition, if the device is unresponsive, for example after a PCI
AER error is detected, the admin interface might not be available.
This might slow down the shutdown sequence and cause a timeout in
the recovery flows which in turn makes the driver believe that the
device is not recoverable.
Fix by replacing the explicit SLAs removal with just a free of the
SLA data structures.
Fixes: d9fb8408376e ("crypto: qat - add rate limiting feature to qat_4xxx")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function qm_stop_qp_nolock() always return zero, so
function type is changed to void.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs files 'dev_state' and 'dev_timeout' are added.
Users can query the current queue stop status through these two
files. And set the waiting timeout when the queue is released.
dev_state: if dev_timeout is set, dev_state indicates the status
of stopping the queue. 0 indicates that the queue is stopped
successfully. Other values indicate that the queue stops fail.
If dev_timeout is not set, the value of dev_state is 0;
dev_timeout: if the queue fails to stop, the queue is released
after waiting dev_timeout * 20ms.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware V3 could be able to drain function by sending mailbox
to hardware which will trigger tasks in device to be flushed out.
When the function is reset, the function can be stopped by this way.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the case when only TSME is enabled, it is useful to state that fact
too, so that users are aware that memory encryption is still enabled
even when the corresponding software variant of memory encryption is not
enabled.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sev-dev.c calls code in the AMD IOMMU now but that can't really work if
latter is not enabled in Kconfig:
ld: vmlinux.o: in function `__sev_firmware_shutdown.isra.0':
sev-dev.c:(.text+0x2501f0e): undefined reference to `amd_iommu_snp_disable'
ld: vmlinux.o: in function `snp_rmptable_init':
sev.c:(.init.text+0x26260): undefined reference to `amd_iommu_snp_en'
make[2]: *** [scripts/Makefile.vmlinux:37: vmlinux] Error 1
make: *** [Makefile:240: __sub-make] Error 2
Fix those deps.
Fixes: f366a8dac1b8 ("iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240207204721.6189-1-bp@alien8.de
Rework the AER reset and recovery flow to take into account root port
integrated devices that gets reset between the error detected and the
slot reset callbacks.
In adf_error_detected() the devices is gracefully shut down. The worker
threads are disabled, the error conditions are notified to listeners and
through PFVF comms and finally the device is reset as part of
adf_dev_down().
In adf_slot_reset(), the device is brought up again. If SRIOV VFs were
enabled before reset, these are re-enabled and VFs are notified of
restarting through PFVF comms.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the driver detects an heartbeat failure, it starts the recovery
flow. Set a limit so that the number of events is limited in case the
heartbeat status is read too frequently.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose the `auto_reset` sysfs attribute to configure the driver to reset
the device when a fatal error is detected.
When auto reset is enabled, the driver resets the device when it detects
either an heartbeat failure or a fatal error through an interrupt.
This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Notify a fatal error condition and optionally reset the device in
the following cases:
* if the device reports an uncorrectable fatal error through an
interrupt
* if the heartbeat feature detects that the device is not
responding
This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a Physical Function (PF) is reset, SR-IOV gets disabled, making the
associated Virtual Functions (VFs) unavailable. Even after reset and
using pci_restore_state, VFs remain uncreated because the numvfs still
at 0. Therefore, it's necessary to reconfigure SR-IOV to re-enable VFs.
This commit introduces the ADF_SRIOV_ENABLED configuration flag to cache
the SR-IOV enablement state. SR-IOV is only re-enabled if it was
previously configured.
This commit also introduces a dedicated workqueue without
`WQ_MEM_RECLAIM` flag for enabling SR-IOV during Heartbeat and CPM error
resets, preventing workqueue flushing warning.
This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the PFVF logic to handle restart and recovery. This adds the
following functions:
* adf_pf2vf_notify_fatal_error(): allows the PF to notify VFs that the
device detected a fatal error and requires a reset. This sends to
VF the event `ADF_PF2VF_MSGTYPE_FATAL_ERROR`.
* adf_pf2vf_wait_for_restarting_complete(): allows the PF to wait for
`ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE` events from active VFs
before proceeding with a reset.
* adf_pf2vf_notify_restarted(): enables the PF to notify VFs with
an `ADF_PF2VF_MSGTYPE_RESTARTED` event after recovery, indicating that
the device is back to normal. This prompts VF drivers switch back to
use the accelerator for workload processing.
These changes improve the communication and synchronization between PF
and VF drivers during system restart and recovery processes.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Disable arbitration to avoid new requests to be processed before
resetting a device.
This is needed so that new requests are not fetched when an error is
detected.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add error notify method to report a fatal error event to all the
subsystems registered. In addition expose an API,
adf_notify_fatal_error(), that allows to trigger a fatal error
notification asynchronously in the context of a workqueue.
This will be invoked when a fatal error is detected by the ISR or
through Heartbeat.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a mechanism that allows to inject a heartbeat error for testing
purposes.
A new attribute `inject_error` is added to debugfs for each QAT device.
Upon a write on this attribute, the driver will inject an error on the
device which can then be detected by the heartbeat feature.
Errors are breaking the device functionality thus they require a
device reset in order to be recovered.
This functionality is not compiled by default, to enable it
CRYPTO_DEV_QAT_ERROR_INJECTION must be set.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
virtqueue_enable_cb() will call virtqueue_poll() which will check if
queue is broken at beginning, so remove the virtqueue_is_broken() call
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sizeof(struct virtio_crypto_akcipher_session_para) is less than
sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from
stack variable leads stack overflow. Clang reports this issue by
commands:
make -j CC=clang-14 mrproper >/dev/null 2>&1
make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1
make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/
virtio_crypto_akcipher_algs.o
Fixes: 59ca6c93387d ("virtio-crypto: implement RSA algorithm")
Link: https://lore.kernel.org/all/0a194a79-e3a3-45e7-be98-83abd3e1cb7e@roeck-us.net/
Cc: <stable@vger.kernel.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unused parameter of static functions should be removed.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes following cleanup issues:
- The return value of the function is
inconsistent with the actual return type.
- After the pointer type is directly converted
to the `__le64` type, the program may crash
or produce unexpected results.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nested macros are integrated into a single macro,
making the code simpler.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the sec DFX function is enhanced, some RAS registers are added
to the original DFX registers to enhance the DFX positioning function.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEV-SNP firmware provides the SNP_CONFIG command used to set various
system-wide configuration values for SNP guests, such as the reported
TCB version used when signing guest attestation reports. Add an
interface to set this via userspace.
[ mdr: Squash in doc patch from Dionna, drop extended request/
certificate handling and simplify this to a simple wrapper around
SNP_CONFIG fw cmd. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-26-michael.roth@amd.com
The SNP_COMMIT command is used to commit the currently installed version
of the SEV firmware. Once committed, the firmware cannot be replaced
with a previous firmware version (cannot be rolled back). This command
will also update the reported TCB to match that of the currently
installed firmware.
[ mdr: Note the reported TCB update in the documentation/commit. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-25-michael.roth@amd.com
This command is used to query the SNP platform status. See the SEV-SNP
spec for more details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-24-michael.roth@amd.com
Add a kdump safe version of sev_firmware_shutdown() and register it as a
crash_kexec_post_notifier so it will be invoked during panic/crash to do
SEV/SNP shutdown. This is required for transitioning all IOMMU pages to
reclaim/hypervisor state, otherwise re-init of IOMMU pages during
crashdump kernel boot fails and panics the crashdump kernel.
This panic notifier runs in atomic context, hence it ensures not to
acquire any locks/mutexes and polls for PSP command completion instead
of depending on PSP command completion interrupt.
[ mdr: Remove use of "we" in comments. ]
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-21-michael.roth@amd.com
Add a new IOMMU API interface amd_iommu_snp_disable() to transition
IOMMU pages to Hypervisor state from Reclaim state after SNP_SHUTDOWN_EX
command. Invoke this API from the CCP driver after SNP_SHUTDOWN_EX
command.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-20-michael.roth@amd.com
The behavior of legacy SEV commands is altered when the firmware is
initialized for SNP support. In that case, all command buffer memory
that may get written to by legacy SEV commands must be marked as
firmware-owned in the RMP table prior to issuing the command.
Additionally, when a command buffer contains a system physical address
that points to additional buffers that firmware may write to, special
handling is needed depending on whether:
1) the system physical address points to guest memory
2) the system physical address points to host memory
To handle case #1, the pages of these buffers are changed to
firmware-owned in the RMP table before issuing the command, and restored
to hypervisor-owned after the command completes.
For case #2, a bounce buffer is used instead of the original address.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-19-michael.roth@amd.com
For SEV/SEV-ES, a buffer can be used to access non-volatile data so it
can be initialized from a file specified by the init_ex_path CCP module
parameter instead of relying on the SPI bus for NV storage, and
afterward the buffer can be read from to sync new data back to the file.
When SNP is enabled, the pages comprising this buffer need to be set to
firmware-owned in the RMP table before they can be accessed by firmware
for subsequent updates to the initial contents.
Implement that handling here.
[ bp: Carve out allocation into a helper. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-18-michael.roth@amd.com
The behavior and requirement for the SEV-legacy command is altered when
the SNP firmware is in the INIT state. See SEV-SNP firmware ABI
specification for more details.
Allocate the Trusted Memory Region (TMR) as a 2MB-sized/aligned region
when SNP is enabled to satisfy new requirements for SNP. Continue
allocating a 1MB-sized region for !SNP configuration.
[ bp: Carve out TMR allocation into a helper. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-17-michael.roth@amd.com
Export sev_do_cmd() as a generic API for the hypervisor to issue
commands to manage an SEV or an SNP guest. The commands for SEV and SNP
are defined in the SEV and SEV-SNP firmware specifications.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-15-michael.roth@amd.com
Before SNP VMs can be launched, the platform must be appropriately
configured and initialized via the SNP_INIT command.
During the execution of SNP_INIT command, the firmware configures
and enables SNP security policy enforcement in many system components.
Some system components write to regions of memory reserved by early
x86 firmware (e.g. UEFI). Other system components write to regions
provided by the operation system, hypervisor, or x86 firmware.
Such system components can only write to HV-fixed pages or Default
pages. They will error when attempting to write to pages in other page
states after SNP_INIT enables their SNP enforcement.
Starting in SNP firmware v1.52, the SNP_INIT_EX command takes a list of
system physical address ranges to convert into the HV-fixed page states
during the RMP initialization. If INIT_RMP is 1, hypervisors should
provide all system physical address ranges that the hypervisor will
never assign to a guest until the next RMP re-initialization.
For instance, the memory that UEFI reserves should be included in the
range list. This allows system components that occasionally write to
memory (e.g. logging to UEFI reserved regions) to not fail due to
RMP initialization and SNP enablement.
Note that SNP_INIT(_EX) must not be executed while non-SEV guests are
executing, otherwise it is possible that the system could reset or hang.
The psp_init_on_probe module parameter was added for SEV/SEV-ES support
and the init_ex_path module parameter to allow for time for the
necessary file system to be mounted/available.
SNP_INIT(_EX) does not use the file associated with init_ex_path. So, to
avoid running into issues where SNP_INIT(_EX) is called while there are
other running guests, issue it during module probe regardless of the
psp_init_on_probe setting, but maintain the previous deferrable handling
for SEV/SEV-ES initialization.
[ mdr: Squash in psp_init_on_probe changes from Tom, reduce
proliferation of 'probe' function parameter where possible.
bp: Fix 32-bit allmodconfig build. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Jarkko Sakkinen <jarkko@profian.com>
Signed-off-by: Jarkko Sakkinen <jarkko@profian.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-14-michael.roth@amd.com
AMD introduced the next generation of SEV called SEV-SNP (Secure Nested
Paging). SEV-SNP builds upon existing SEV and SEV-ES functionality while
adding new hardware security protection.
Define the commands and structures used to communicate with the AMD-SP
when creating and managing the SEV-SNP guests. The SEV-SNP firmware spec
is available at developer.amd.com/sev.
[ mdr: update SNP command list and SNP status struct based on current
spec, use C99 flexible arrays, fix kernel-doc issues. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-13-michael.roth@amd.com
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc_node() function instead of the
argument count * size in the kzalloc_node() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Switch to raw_smp_processor_id() to prevent a number of
warnings from kernel debugging. We do not care about
preemption here, as the CPU number is only used as a
poor mans load balancing or device selection. If preemption
happens during an encrypt/decrypt operation a small performance
hit will occur but everything will continue to work, so just
ignore it. This commit is similar to e7a9b05ca4
("crypto: cavium - Fix smp_processor_id() warnings").
[ 7538.874350] BUG: using smp_processor_id() in preemptible [00000000] code: af_alg06/8438
[ 7538.874368] caller is debug_smp_processor_id+0x1c/0x28
[ 7538.874373] CPU: 50 PID: 8438 Comm: af_alg06 Kdump: loaded Not tainted 5.10.0.pc+ #18
[ 7538.874377] Call trace:
[ 7538.874387] dump_backtrace+0x0/0x210
[ 7538.874389] show_stack+0x2c/0x38
[ 7538.874392] dump_stack+0x110/0x164
[ 7538.874394] check_preemption_disabled+0xf4/0x108
[ 7538.874396] debug_smp_processor_id+0x1c/0x28
[ 7538.874406] sec_create_qps+0x24/0xe8 [hisi_sec2]
[ 7538.874408] sec_ctx_base_init+0x20/0x4d8 [hisi_sec2]
[ 7538.874411] sec_aead_ctx_init+0x68/0x180 [hisi_sec2]
[ 7538.874413] sec_aead_sha256_ctx_init+0x28/0x38 [hisi_sec2]
[ 7538.874421] crypto_aead_init_tfm+0x54/0x68
[ 7538.874423] crypto_create_tfm_node+0x6c/0x110
[ 7538.874424] crypto_alloc_tfm_node+0x74/0x288
[ 7538.874426] crypto_alloc_aead+0x40/0x50
[ 7538.874431] aead_bind+0x50/0xd0
[ 7538.874433] alg_bind+0x94/0x148
[ 7538.874439] __sys_bind+0x98/0x118
[ 7538.874441] __arm64_sys_bind+0x28/0x38
[ 7538.874445] do_el0_svc+0x88/0x258
[ 7538.874447] el0_svc+0x1c/0x28
[ 7538.874449] el0_sync_handler+0x8c/0xb8
[ 7538.874452] el0_sync+0x148/0x180
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Read the values of some device registers before the device
is reset, these values help analyze the cause of the device exception.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Support get device current state. The value 0 indicates that
the device is busy, and the value 1 indicates that the
device is idle. When the device is in suspended, 1 is returned.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the debugfs_create_dir() error checking in
iaa_crypto_debugfs_init(). Because the debugfs_create_dir() is developed
in a way that the caller can safely handle the errors that
occur during the creation of DebugFS nodes.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header table and related code is currently unused - it was
included and used for canned mode, but canned mode has been removed,
so this code can be safely removed as well.
This indirectly fixes a bug reported by Dan Carpenter.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-crypto/b2e0bd974981291e16882686a2b9b1db3986abe4.camel@linux.intel.com/T/#m4403253d6a4347a925fab4fc1cdb4ef7c095fb86
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The use of array_size() leads gcc to assume the memcpy() can have a larger
limit than actually possible, which triggers a string fortification warning:
In file included from include/linux/string.h:296,
from include/linux/bitmap.h:12,
from include/linux/cpumask.h:12,
from include/linux/sched.h:16,
from include/linux/delay.h:23,
from include/linux/iopoll.h:12,
from drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c:3:
In function 'fortify_memcpy_chk',
inlined from 'adf_gen4_init_thd2arb_map' at drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c:401:3:
include/linux/fortify-string.h:579:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
579 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/fortify-string.h:588:4: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add an explicit range check to avoid this.
Fixes: 5da6a2d5353e ("crypto: qat - generate dynamically arbiter mappings")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Relocate all crypto files in vmx driver to arch/powerpc/crypto directory
and remove vmx directory.
drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c
drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c
drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c
drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c
drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h
drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl
drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c
drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl
drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c
deleted files:
drivers/crypto/vmx/Makefile
drivers/crypto/vmx/Kconfig
drivers/crypto/vmx/ppc-xlate.pl
This patch has been tested has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kfree() function was called in up to two cases by the
__virtio_crypto_akcipher_do_req() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.
* Adjust jump targets.
* Delete two initialisations which became unnecessary
with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ahash_alg->setkey is updated to ahash_nosetkey in ahash.c
so checking setkey() function to determine hmac algorithm is not valid.
to fix this added is_hmac variable in structure caam_hash_alg to determine
whether the algorithm is hmac or not.
Fixes: 2f1f34c1bf7b ("crypto: ahash - optimize performance when wrapping shash")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The commit "crypto: qat - generate dynamically arbiter mappings"
introduced a regression on qat_402xx devices.
This is reported when the driver probes the device, as indicated by
the following error messages:
4xxx 0000:0b:00.0: enabling device (0140 -> 0142)
4xxx 0000:0b:00.0: Generate of the thread to arbiter map failed
4xxx 0000:0b:00.0: Direct firmware load for qat_402xx_mmp.bin failed with error -2
The root cause of this issue was the omission of a necessary function
pointer required by the mapping algorithm during the implementation.
Fix it by adding the missing function pointer.
Fixes: 5da6a2d5353e ("crypto: qat - generate dynamically arbiter mappings")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
