IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add support for the WSA macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230313075445.17160-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the WSA macro codec on Qualcomm SM8550, which comes without NPL clock
exposed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230313075445.17160-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the TX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230313075445.17160-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the TX macro codec on Qualcomm SM8550, which comes without NPL clock
exposed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230313075445.17160-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the Qualcomm TX macro codec binding allows two different clock
setups - with (for ADSP) and without macro/dcodec entries (for ADSP
bypassed). With more devices coming soon, this will keep growing, thus
rework the clocks/clock-names to be specific for each binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230313075445.17160-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the RX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230313075445.17160-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the RX macro codec on Qualcomm SM8550, which comes without NPL clock
exposed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230313075445.17160-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the Qualcomm RX macro codec binding allows two different clock
setups - with (for ADSP) and without macro/dcodec entries (for ADSP
bypassed). With more devices coming soon, this will keep growing, thus
rework the clocks/clock-names to be specific for each binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230313075445.17160-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC supports snd_soc_add_pcm_runtime(), but user need to
call it one-by-one if it has multi dai_links.
This patch adds snd_soc_add_pcm_runtimes() which supports multi
dai_links.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6u76nhq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Card2 Custom Sample will be too long Card name, and be error
audio-graph-card2-custom-sample audio-graph-card2-custom-sample \
ASoC: driver name too long \
audio-graph-card2-custom-sample' -> 'audio-graph-car'
This patch uses short name to avoid it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkke7qzf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have unreachable 'return ret' statement in cs35l56_spi_probe(),
delete it as its dead code..
This is found by static analysis with smatch.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230324145535.3951689-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current ASoC will ignore already connected component when binding Card.
This will happen mainly "CPU Component" is handled as "Platform Component",
which was needed before.
static int snd_soc_rtd_add_component(...)
{
...
for_each_rtd_components(rtd, i, comp) {
/* already connected */
if (comp == component)
return 0;
}
...
}
Some drivers are still using CPU or Dummy Component as Platform Component,
but these are no meaning or ignored.
This patch-set remove these.
After commit bbf7d3b1c4 ("ASoC: soc-pcm: align BE 'atomicity' with
that of the FE") BE and FE atomicity must match.
In the case of Compress PCM there is a mismatch in atomicity between FE
and BE and we get errors like this:
[ 36.434566] sai1-wm8960-hifi: dpcm_be_connect: FE is atomic but BE
is nonatomic, invalid configuration
[ 36.444278] PCM Deep Buffer: ASoC: can't connect SAI1.OUT
In order to fix this we must inherit the atomicity from DAI link
associated with current PCM Compress FE.
Fixes: bbf7d3b1c4 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230324124019.30826-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable 'rv' is defined as unsigned type, so the following if
statement is invalid, we can modify the type of rv to int.
if (rv < 0) {
dev_err(cs35l56->dev, "irq: failed to get pm_runtime:
%d\n", rv);
goto err_unlock;
}
./sound/soc/codecs/cs35l56.c:333:5-7: WARNING: Unsigned expression compared with zero: rv < 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4599
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230324022303.121485-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link->platform is no longer needed if CPU and Platform are
same Component. This patch removes unnecessary dai_link->platform.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jzz7jczp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link->platform is no longer needed if CPU and Platform are
same Component. This patch removes unnecessary dai_link->platform.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lejnjczu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link->platform is no longer needed if CPU and Platform are
same Component. This patch removes unnecessary dai_link->platform.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/87mt43jd00.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link->platform is no longer needed if CPU and Platform are
same Component. This patch removes unnecessary dai_link->platform.
Dummy Platform is also not necessary.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7ojjd06.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the AK5558 ADC audio codec bindings to DT schema.
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230322200949.8986-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The order in which clocks are stopped matters as some of the clock
like NPL are derived from MCLK.
Without this patch, Dragonboard RB5 DSP would crash with below error:
qcom_q6v5_pas 17300000.remoteproc: fatal error received:
ABT_dal.c:278:ABTimeout: AHB Bus hang is detected,
Number of bus hang detected := 2 , addr0 = 0x3370000 , addr1 = 0x0!!!
Turn off fsgen first, followed by npl and then finally mclk, which is exactly
the opposite order of enable sequence.
Fixes: 1dc3459009 ("ASoC: codecs: lpass: register mclk after runtime pm")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20230323110125.23790-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Wolfson WM1811/WM8994/WM8958 audio codecs bindings to DT
schema.
Changes against original binding:
1. Add missing LDO1VDD-supply and LDO2VDD-supply.
2. Use "gpios" suffix for wlf,ldo1ena and wlf,ldo2ena (Linux kernel's
gpiolib already looks for both variants).
3. Do not require AVDD1-supply and DCVDD-supply, because at least on
Arndale board with Exynos5250 these are being supplied by internal
LDOs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230322193541.827291-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Acer Iconia One 7 B1-750 tablet mostly works fine with the defaults
for an Bay Trail CR tablet. Except for the internal mic, instead of
an analog mic on IN3 a digital mic on DMIC1 is uses.
Add a quirk with these settings for this tablet.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230322145332.131525-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There was a missing mutex_unlock() in sof_ipc4_widget_free()
use_chain_dma if-branch that caused a static analysis error. The
branch should not be used in a normal working configuration and if its
used its an indication of a bad topology. Add missing mutex_unlock()
and a warning print if the if-branch is taken, and another warning
print to a symmetric place in sof_ipc4_widget_setup().
Fixes: ca5ce0caa6 ("ASoC: SOF: ipc4/intel: Add support for chained DMA")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202303222050.dCw0fPCW-lkp@intel.com/
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Link: https://lore.kernel.org/r/20230322181830.574635-1-jyri.sarha@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
IPC3 and IPC4 firmwares handle and execute tasks at different
stages, like managing DMAs. In most cases these are aligned, but
we have few exceptions that needs to be handled differently.
This series introduces flags to handle the differing cases to make sure that
the correct sequencing is used regerless of the IPC version.
Basically CPU and Platform are different Component, but if CPU is using
soc-generic-dmaengine-pcm, same dev will be shared between CPU and
Platform, and Simple Card had been supporting it.
When we focus to clean up Simple Card driver, we tend to remove platforms
if no Platform was selected, but it is wrong because of above reasons.
This patch adds comment why we shouldn't remove platforms.
In case of CPU is not using soc-generic-dmaengine-pcm, CPU and Platform
will be duplicated, but it will be ignored by snd_soc_rtd_add_component().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yattwqv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dpcm_capture is set unconditionally, we can drop the conditional
setting of it.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322075012.23463-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For MTL RVP, SSP2 is used for BT offload. This is enabled
in the sof_rt5682_quirk_table
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322074916.23225-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For Rex, SSP1 is used for BT offload. This is enabled
in the sof_rt5682_quirk_table
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322074916.23225-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recommended sequence for triggering the host DMA is to first program
the DMA in the FW before setting the RUN bit to start the stream in the
host. With IPC3, this sequence is honored because the FW programs the
DMA when the HW_PARAMS IPC is sent during PCM hw_params and then the host
sets the RUN bit during sof_pcm_trigger(). But with IPC4,
sof_pcm_trigger() sends the SET_PIPELINE_STATE IPC to program the DMA in
the FW after the DMA RUN bit is set.
In order to minimize the impact for IPC3, introduce a new flag as part
of struct sof_ipc_pcm_ops, ipc_first_on_start, which will be set for IPC4
only. With this flag set, the SET_PIPELINE_STATE IPC will be sent before
the DMA RUN bit is set by the host during the START/PAUSE_RELEASE
triggers.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322094346.6019-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of IPC4, since there is no PCM_PARAMS IPC to send the new
stream tag when restarting a stream without a hw_free, the original
stream tag needs to be preserved. So, add new a flag as part of struct
sof_ipc_pcm_ops, reset_hw_params_during_stop and set it only for IPC3.
This will ensure that the host DMA stream tag will not be given up during
the STOP trigger for IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322094346.6019-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of repeated start/stop without involving hw_free, the stream
tag needs to be preserved for the subsequent starts. So, skip performing
the DMA clean up during stop and handle it only during suspend or
hw_free.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322094346.6019-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The set_get_data() IPC op bypasses the check for the no_pm flag as done
with the regular IPC tx_msg op. Since set_get_data should be performed
when the DSP is in D0I0, set the DSP power state to D0I0 before sending
the IPC's in sof_ipc4_set_get_data().
Fixes: ceb89acc4d ("ASoC: SOF: ipc4: Add support for mandatory message handling functionality")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322085538.10214-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
On a platform when the DSP is in use, we cannot select individual links
to use or not use the DSP, it is either all or none. On some audio
endpoint, like HDMI/DP, it is preferred to not use any processing in DSP
to reduce the latency and to allow bytestream pass-through (DTS, DD,
etc)
IPC4 introduces a new type of end-to-end connection within the DSP which
is using the host DMA and link DMA in a single buffer, working
back-to-back, passing the received data without looking at it or trying
to understand the format, content.
This mode reduces the latency and allows non PCM streams to be sent from
userspace.
The feature is enabled per PCM bases, signalled in topology.
The patch adding the bytes control support moved the error check outside
of the list_for_each_entry() which was not correct as at the end of the
list_for_each_entry() the scontrol will no longer point where the error
happened, but it to the list head.
Restore the original logic and return on the first error with the error
code.
Fixes: a062c8899f ("ASoC: SOF: ipc4-control: Add support for bytes control get and put")
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/alsa-devel/6be945d2-40cb-46fb-67ba-ed3a19cddfa4@linux.intel.com/T/#t
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321145651.9118-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
The CS35L56 is a high-performance boosted mono audio amplifier.
Supported control interfaces are I2C, SPI or SoundWire.
Supported audio interfaces are I2S/TDM or SoundWire.
The CS35L56 has a self-booting firmware in ROM, with the ability
to patch the firmware and/or apply tunings.
Patches #1 to #7 add support to cs_dsp and wm_adsp for self-booting
firmware and the ability to apply a .bin file without having to
apply a .wmfw.
Adds support for a low-power Hibernation State.
Add support for a low-power hibernation state for the DSP. In
this state the DSP RAM contents are maintained, such that
firmware does not need to be re-downloaded, but the rest of the
chip's register state is lost.
Entry to this state is achieved via the register interface
(either by an external driver using the control port, or the
programmable DSP). Exit from this state is triggered by activity
on device GPIO pins, intended SPI transaction, or I2C
transaction with intended slave address.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167933511185.26.10641185496218226278@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L45 digital core incorporates one programmable DSP block,
capable of running a wide range of audio enhancement and speaker
and battery protection functions.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167933510679.26.5992985447093367768@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add logic for setting up and tearing down chained DMA connections.
Since pipelines are not used, all the logic to set the pipeline states
can be bypassed, with only the DMA programming sequences remaining. In
addition the same format needs to be used for host- and link-DMA,
without the usual fixup to use the S32_LE format on the link.
Note however that for convenience and compatibility with existing
definitions, the topology relies on the concept of pipelines with a
'USE_CHAIN_DMA' token indicating that all the logic shall be bypassed.
Unlike 'normal' ALSA sequences, the chain DMA is not programmed in
hw_params/hw_free. The IPC message to set-up and tear-down chained DMA
are sent in sof_ipc4_trigger_pipelines(), but the contents prepared
earlier.
Chained DMA is only supported by the Intel HDA DAI for now, and only
S16_LE and S32_LE formats are supported for now.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
