IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add scsi_done_direct() which behaves like scsi_done() except that it
invokes blk_mq_complete_request_direct() in order to complete the request.
Callers from process context can complete the request directly instead
waking ksoftirqd.
Link: https://lore.kernel.org/r/Yfw7JaszshmfYa1d@flow
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a SCSI device handler module is loaded after some SCSI devices have
already been probed (e.g. via request_module() by dm-multipath), the
"access_state" and "preferred_path" sysfs attributes remain invisible for
these devices, although the handler is attached and live. The reason is
that the visibility is only checked when the sysfs attribute group is first
created. This results in an inconsistent user experience depending on the
load order of SCSI low-level drivers vs. device handler modules.
This patch changes user space API: attempting to read the "access_state" or
"preferred_path" attributes will now result in -EINVAL rather than -ENODEV
for devices that have no device handler, and tests for the existence of
these attributes will have a different result.
Link: https://lore.kernel.org/r/20220127141351.30706-1-mwilck@suse.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
destroy_workqueue() already drains the queue before destroying it, so there
is no need to flush it explicitly.
Remove the redundant flush_workqueue() call.
Link: https://lore.kernel.org/r/20220127014330.1185114-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
destroy_workqueue() already drains the queue before destroying it, so there
is no need to flush it explicitly.
Remove the redundant flush_workqueue() calls.
Link: https://lore.kernel.org/r/20220127013934.1184923-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
coccinelle report:
./drivers/scsi/bfa/bfad_attr.c:908:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:860:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:888:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:853:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:808:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:728:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:822:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:927:9-17:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:900:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:874:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:714:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:839:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.1643181468.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
coccinelle report:
./drivers/scsi/mvsas/mv_init.c:699:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/mvsas/mv_init.c:747:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/c1711f7cf251730a8ceb5bdfc313bf85662b3395.1643182948.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The hisi_sas_slot.is_internal member is not set properly for ATA commands
which the driver sends directly. A TMF struct pointer is normally used as a
test to set this, but it is NULL for those commands. It's not ideal, but
pass an empty TMF struct to set that member properly.
Link: https://lore.kernel.org/r/1643627607-138785-1-git-send-email-john.garry@huawei.com
Fixes: dc313f6b125b ("scsi: hisi_sas: Factor out task prep and delivery code")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Because WB performs writes in SLC mode, it is not possible to use
WriteBooster indefinitely. Vendors can set a lifetime limit in the device.
If the lifetime exceeds this limit, the device ican disable the WB feature.
The feature is defined in the "bWriteBoosterBufferLifeTimeEst (IDN = 1E)"
attribute.
With lifetime exceeding the limit value, the current driver continuously
performs the following query:
- Write Flag: WB_ENABLE / DISABLE
- Read attr: Available Buffer Size
- Read attr: Current Buffer Size
This patch recognizes that WriteBooster is no longer supported by the
device, and prevents unnecessary queries.
Link: https://lore.kernel.org/r/1891546521.01643252701746.JavaMail.epsvc@epcpadp3
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently a use-after-free may occur if a sas_task is aborted by the upper
layer before we handle the I/O completion in mpi_ssp_completion() or
mpi_sata_completion().
In this case, the following are the two steps in handling those I/O
completions:
- Call complete() to inform the upper layer handler of completion of
the I/O.
- Release driver resources associated with the sas_task in
pm8001_ccb_task_free() call.
When complete() is called, the upper layer may free the sas_task. As such,
we should not touch the associated sas_task afterwards, but we do so in the
pm8001_ccb_task_free() call.
Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering.
Link: https://lore.kernel.org/r/1643289172-165636-4-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently a use-after-free may occur if a TMF sas_task is aborted before we
handle the IO completion in mpi_ssp_completion(). The abort occurs due to
timeout.
When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the
sas_task is freed in pm8001_exec_internal_tmf_task().
However, if the I/O completion occurs later, the I/O completion still
thinks that the sas_task is available. Fix this by clearing the ccb->task
if the TMF times out - the I/O completion handler does nothing if this
pointer is cleared.
Link: https://lore.kernel.org/r/1643289172-165636-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
make W=1 complains of an undescribed function parameter:
drivers/scsi/pm8001/pm80xx_hwi.c:3938: warning: Function parameter or member 'circularQ' not described in 'process_one_iomb'
Fix it.
Link: https://lore.kernel.org/r/1643289172-165636-2-git-send-email-john.garry@huawei.com
Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We currently use ->cmd_per_lun as initial queue depth for setting up the
budget_map. Martin Wilck reported that it is common for the queue_depth to
be subsequently updated in slave_configure() based on detected hardware
characteristics.
As a result, for some drivers, the static host template settings for
cmd_per_lun and can_queue won't actually get used in practice. And if the
default values are used to allocate the budget_map, memory may be consumed
unnecessarily.
Fix the issue by reallocating the budget_map after ->slave_configure()
returns. At that time the device queue_depth should accurately reflect what
the hardware needs.
Link: https://lore.kernel.org/r/20220127153733.409132-1-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Martin Wilck <martin.wilck@suse.com>
Suggested-by: Martin Wilck <martin.wilck@suse.com>
Tested-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current code handles completions for SATA devices in mpi_sata_completion()
and mpi_sata_event().
However, at the time when any SATA event happens, for almost all the event
types, the command is still in the target. It is therefore incorrect to
complete the task in sata_event().
There are some events for which we get sata_completions, some need recovery
procedure and others abort. All the tasks must be completed via
sata_completion() path.
Removed the task done related code from sata_events(). For tasks where we
don't get completions, let top layer call abort() to abort the command post
timeout.
Link: https://lore.kernel.org/r/20220124082255.86223-1-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Co-developed-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Log subpages are starting to appear in real devices (e.g. SSDs) so add
support for one. Adopt approach where all "wild" sub-pages are themselves
listed as long as there is at least one non-wild page or subpage for a
given page number.
Link: https://lore.kernel.org/r/20220109012853.301953-10-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
By default, this driver places a read lock around all user data fetches and
a write lock around all user data modifying operations (e.g. WRITE
commands). These locks have "per store" granularity. Other drivers that
have a similar function (e.g. null_blk) do not take this data integrity
step and run significantly faster in some tests.
In the common case of a (simulated) device to device copy (e.g. what dd
and its variants do) there should be no need for locks around data
accesses. So add the driver and sysfs parameter no_rwlock which is boolean
and when set does what its name suggests. The default is false for backward
comaptibility.
Link: https://lore.kernel.org/r/20220109012853.301953-7-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To distinguish between resets sent by the SCSI mid-level error
handling and newly introduced devices (LUs), this Unit Attention:
power on, reset, or bus reset occurred [0x29,0x0]
has been subdivided into that UA for the reset case and this new UA:
power on occurred [0x29,0x1]
for the new device (LU) case. This makes debug a little easier to follow
when it is turned on (e.g. 'echo 0x1 > opts').
Bump driver version number.
Link: https://lore.kernel.org/r/20220109012853.301953-6-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Refine the sdebug_blk_mq_poll() function so it only takes the spinlock on
the queue when it can see one or more requests with the in_use bitmap flag
set.
Link: https://lore.kernel.org/r/20220109012853.301953-5-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the internal in_use bit array in this driver is full returning
SCSI_MLQUEUE_HOST_BUSY leads to the mid-level reissuing the request which
is unhelpful. Previously TASK SET FULL status was only returned if ALL_TSF
[0x400] is placed in the opts variable (at load time or via sysfs). Now
ignore that setting and always return TASK SET FULL when in_use array is
full. Also set DID_ABORT together with TASK SET FULL so the mid-level gives
up immediately.
Aside: the situations addressed by this patch lead to lockups and
timeouts. They have only been detected when blk_poll() is used. That
mechanism is relatively new in the SCSI subsystem suggesting the mid-level
may need more work in that area.
Link: https://lore.kernel.org/r/20220109012853.301953-4-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When scsi_debug is loaded as a module with many (simulated) hosts, targets,
and devices (LUs), modprobe can take a long time to return. Only a small
amount of this time is spent in the scsi_debug_init(); the rest is other
parts of the kernel reacting to to the appearance of new storage
devices. As soon as scsi_debug_init() has completed the user space may call
'rmmod scsi_debug' and this was found to cause race problems as outlined
here:
https://bugzilla.kernel.org/show_bug.cgi?id=212337
To reliably generate this race a sysfs parameter called rm_all_hosts was
added and the code was strengthened in this area. The main change was to
make the count of scsi_debug hosts present an atomic. Then it was found
that the handling of the existing add_host parameter needed the same
strengthening. Further: 'echo -9999 >
/sys/bus/pseudo/drivers/scsi_debug/add_host has the same effect as
rm_all_hosts so rm_all_hosts was not needed.
To inhibit a race between two invocations of writes to add_host, a mutex
was added. Also address a possible race when rmmod is called but LUs are
still being added.
The logic to remove (all) hosts is rather crude: it works backwards down a
linked lists of hosts. Any pending requests are terminated with
DID_NO_CONNECT as are any new requests. In the case where not all hosts are
being removed, the ones that remain may have lost requests as just
outlined. The lowest numbered host (id) hosts will remain.
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220109012853.301953-2-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pointer SCp is being re-assigned the same value that it was initialized to
a few lines earlier, the assignment is redundant and can be removed.
Link: https://lore.kernel.org/r/20220123175530.110462-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This event is raised when link is lost as specified in UFSHCI spec and that
means communication is not possible. Thus initializing UFS interface needs
to be done.
Make UFS driver considers Link Lost as fatal in the INT_FATAL_ERRORS
mask. This will trigger a host reset whenever a link lost interrupt occurs.
Link: https://lore.kernel.org/r/1642743475-54275-1-git-send-email-kwmad.kim@samsung.com
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The return value of ufshcd_set_dev_pwr_mode() is passed to device PM
core. However, the function currently returns a SCSI result which the PM
core doesn't understand. This might lead to unexpected behaviors in
userland; a platform reset was observed in Android.
Use a generic error code for SSU failures.
Link: https://lore.kernel.org/r/1642743182-54098-1-git-send-email-kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While allocating firmware dump, check if dump is already collected and do
not re-allocate the buffer.
Link: https://lore.kernel.org/r/20220110050218.3958-17-njavali@marvell.com
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is an update to the original 28xx adapter enablement. Add a bunch of
conditionals that are applicable for 28xx.
Link: https://lore.kernel.org/r/20220110050218.3958-16-njavali@marvell.com
Fixes: ecc89f25e225 ("scsi: qla2xxx: Add Device ID for ISP28XX")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
28XX adapters are capable of detecting both T10 PI tag escape values as
well as IP guard. This was missed due to the adapter type missed in the
corresponding macros. Fix this by adding support for 28xx in those macros.
Link: https://lore.kernel.org/r/20220110050218.3958-14-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Tested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Silence compile warning due to unaligned memory access.
qla_edif.c:713:45: warning: taking address of packed member 'u' of class or
structure 'auth_complete_cmd' may result in an unaligned pointer value
[-Waddress-of-packed-member]
fcport = qla2x00_find_fcport_by_pid(vha, &appplogiok.u.d_id);
Link: https://lore.kernel.org/r/20220110050218.3958-13-njavali@marvell.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A device logout in loop topology initiates a device connection teardown
which loses the FW device handle. In loop topo, the device handle is not
regrabbed leading to device login failures and eventually to loss of the
device. Fix this by taking the main login path that does it.
Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add ql2xnvme_queues module parameter to configure number of NVMe queues
Usage:
Number of NVMe Queues that can be configured.
Final value will be min(ql2xnvme_queues, num_cpus, num_chip_queues),
1 - Minimum number of queues supported
8 - Default value
128 - Maximum number of queues supported
Link: https://lore.kernel.org/r/20220110050218.3958-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Per FW request, Exec FW can fail due to temporary error resulting in driver
not attaching to the adapter. Add retry of this command up to 4 retries.
Link: https://lore.kernel.org/r/20220110050218.3958-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix stuck sessions in get port database. When a thread is in the process of
re-establishing a session, a flag is set to prevent multiple threads /
triggers from doing the same task. This flag was left on, where any attempt
to relogin was locked out. Clear this flag, if the attempt has failed.
Link: https://lore.kernel.org/r/20220110050218.3958-4-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put().
Link: https://lore.kernel.org/r/20220110050218.3958-3-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move common open-coded asynchronous command initializing code such as
setting up the timer and the done callback into one function. This is a
preparation step and allows us later on to change the low level error flow
handling at a central place.
Link: https://lore.kernel.org/r/20220110050218.3958-2-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suppose we have an environment with a number of non-NPIV FCP devices
(virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical
FCP channel (HBA port) and its I_T nexus. Plus a number of storage target
ports zoned to such shared channel. Now one target port logs out of the
fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port
recovery depending on the ADISC result. This happens on all such FCP
devices (in different Linux images) concurrently as they all receive a copy
of this RSCN. In the following we look at one of those FCP devices.
Requests other than FSF_QTCB_FCP_CMND can be slow until they get a
response.
Depending on which requests are affected by slow responses, there are
different recovery outcomes. Here we want to fix failed recoveries on port
or adapter level by avoiding recovery requests that can be slow.
We need the cached N_Port_ID for the remote port "link" test with ADISC.
Just before sending the ADISC, we now intentionally forget the old cached
N_Port_ID. The idea is that on receiving an RSCN for a port, we have to
assume that any cached information about this port is stale. This forces a
fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for
the same port. Since we typically can still communicate with the nameserver
efficiently, we now reach steady state quicker: Either the nameserver still
does not know about the port so we stop recovery, or the nameserver already
knows the port potentially with a new N_Port_ID and we can successfully and
quickly perform open port recovery. For the one case, where ADISC returns
successfully, we re-initialize port->d_id because that case does not
involve any port recovery.
This also solves a problem if the storage WWPN quickly logs into the fabric
again but with a different N_Port_ID. Such as on virtual WWPN takeover
during target NPIV failover.
[https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the
RSCN from the storage FDISC was ignored by zfcp and we could not
successfully recover the failover. On some later failback on the storage,
we could have been lucky if the virtual WWPN got the same old N_Port_ID
from the SAN switch as we still had cached. Then the related RSCN
triggered a successful port reopen recovery. However, there is no
guarantee to get the same N_Port_ID on NPIV FDISC.
Even though NPIV-enabled FCP devices are not affected by this problem, this
code change optimizes recovery time for gone remote ports as a side effect.
The timely drop of cached N_Port_IDs prevents unnecessary slow open port
attempts.
While the problem might have been in code before v2.6.32 commit
799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix
depends on the gid_pn_work introduced with that commit, so we mark it as
culprit to satisfy fix dependencies.
Note: Point-to-point remote port is already handled separately and gets its
N_Port_ID from the cached peer_d_id. So resetting port->d_id in general
does not affect PtP.
Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com
Fixes: 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp")
Cc: <stable@vger.kernel.org> #2.6.32+
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the comment in check_fw_ready() we should not check the
IOP1_READY field in register SCRATCH_PAD_1 for 8008 or 8009 controllers.
However we check this very field in process_oq() for processing the highest
index interrupt vector. The highest interrupt vector is checked as the FW
is programmed to signal fatal errors through this irq.
Change that function to not check IOP1_READY for those mentioned
controllers, but do check ILA_READY in both cases.
The reason I assume that this was not hit earlier was because we always
allocated 64 MSI(X), and just did not pass the vector index check in
process_oq(), i.e. the handler never ran for vector index 63.
Link: https://lore.kernel.org/r/1642508105-95432-1-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
