IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fix conflicts between memslot overhaul and commit 511d25d6b789f ("KVM:
PPC: Book3S: Suppress warnings when allocating too big memory slots")
from the powerpc tree.
Use kvm_arch_vcpu_get_wait() to get a vCPU's rcuwait object instead of
using vcpu->wait directly in kvmhv_run_single_vcpu(). Functionally, this
is a nop as vcpu->arch.waitp is guaranteed to point at vcpu->wait. But
that is not obvious at first glance, and a future change coming in via
the KVM tree, commit 510958e99721 ("KVM: Force PPC to define its own
rcuwait object"), will hide vcpu->wait from architectures that define
__KVM_HAVE_ARCH_WQP to prevent generic KVM from attepting to wake a vCPU
with the wrong rcuwait object.
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211213174556.3871157-1-seanjc@google.com
The current memslot code uses a (reverse gfn-ordered) memslot array for
keeping track of them.
Because the memslot array that is currently in use cannot be modified
every memslot management operation (create, delete, move, change flags)
has to make a copy of the whole array so it has a scratch copy to work on.
Strictly speaking, however, it is only necessary to make copy of the
memslot that is being modified, copying all the memslots currently present
is just a limitation of the array-based memslot implementation.
Two memslot sets, however, are still needed so the VM continues to run
on the currently active set while the requested operation is being
performed on the second, currently inactive one.
In order to have two memslot sets, but only one copy of actual memslots
it is necessary to split out the memslot data from the memslot sets.
The memslots themselves should be also kept independent of each other
so they can be individually added or deleted.
These two memslot sets should normally point to the same set of
memslots. They can, however, be desynchronized when performing a
memslot management operation by replacing the memslot to be modified
by its copy. After the operation is complete, both memslot sets once
again point to the same, common set of memslot data.
This commit implements the aforementioned idea.
For tracking of gfns an ordinary rbtree is used since memslots cannot
overlap in the guest address space and so this data structure is
sufficient for ensuring that lookups are done quickly.
The "last used slot" mini-caches (both per-slot set one and per-vCPU one),
that keep track of the last found-by-gfn memslot, are still present in the
new code.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <17c0cf3663b760a0d3753d4ac08c0753e941b811.1638817641.git.maciej.szmigiero@oracle.com>
For PPC HV, get the number of pages directly from the new memslot instead
of computing the same from the userspace memory region, and explicitly
check for !DELETE instead of inferring the same when toggling mmio_update.
The motivation for these changes is to avoid referencing the @mem param
so that it can be dropped in a future commit.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <1e97fb5198be25f98ef82e63a8d770c682264cc9.1638817639.git.maciej.szmigiero@oracle.com>
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch
code to handle propagating arch specific data from "new" to "old" when
necessary. This is a baby step towards dynamically allocating "new" from
the get go, and is a (very) minor performance boost on x86 due to not
unnecessarily copying arch data.
For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE
and FLAGS_ONLY. This is functionally a nop as the previous behavior
would overwrite the pointer for CREATE, and eventually discard/ignore it
for DELETE.
For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV,
x86 needs to reallocate arch data in the MOVE case as the size of x86's
allocations depend on the alignment of the memslot's gfn.
Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to
match the "commit" prototype.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[mss: add missing RISCV kvm_arch_prepare_memory_region() change]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <67dea5f11bbcfd71e3da5986f11e87f5dd4013f9.1638817639.git.maciej.szmigiero@oracle.com>
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.
Let's bite the bullet and repaint all of it in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The userspace can trigger "vmalloc size %lu allocation failure: exceeds
total pages" via the KVM_SET_USER_MEMORY_REGION ioctl.
This silences the warning by checking the limit before calling vzalloc()
and returns ENOMEM if failed.
This does not call underlying valloc helpers as __vmalloc_node() is only
exported when CONFIG_TEST_VMALLOC_MODULE and __vmalloc_node_range() is
not exported at all.
Spotted by syzkaller.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Use 'size' for the variable rather than 'cb']
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210901084512.1658628-1-aik@ozlabs.ru
On POWER9 and newer, rather than the complex HMI synchronisation and
subcore state, have each thread un-apply the guest TB offset before
calling into the early HMI handler.
This allows the subcore state to be avoided, including subcore enter
/ exit guest, which includes an expensive divide that shows up
slightly in profiles.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-54-npiggin@gmail.com
The P9 path uses vc->dpdes only for msgsndp / SMT emulation. This adds
an ordering requirement between vcpu->doorbell_request and vc->dpdes for
no real benefit. Use vcpu->doorbell_request directly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-53-npiggin@gmail.com
This goes further to removing vcores from the P9 path. Also avoid the
memset in favour of explicitly initialising all fields.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-52-npiggin@gmail.com
The P9 path always uses one vcpu per vcore, so none of the vcore, locks,
stolen time, blocking logic, shared waitq, etc., is required.
Remove most of it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-51-npiggin@gmail.com
cpu_in_guest is set to determine if a CPU needs to be IPI'ed to exit
the guest and notice the need_tlb_flush bit.
This can be implemented as a global per-CPU pointer to the currently
running guest instead of per-guest cpumasks, saving 2 atomics per
entry/exit. P7/8 doesn't require cpu_in_guest, nor does a nested HV
(only the L0 does), so move it to the P9 HV path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-50-npiggin@gmail.com
Rearrange the MSR saving on entry so it does not follow the mtmsrd to
disable interrupts, avoiding a possible RAW scoreboard stall.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-46-npiggin@gmail.com
mftb() is expensive and one can be avoided on nested guest dispatch.
If the time checking code distinguishes between the L0 timer and the
nested HV timer, then both can be tested in the same place with the
same mftb() value.
This also nicely illustrates the relationship between the L0 and nested
HV timers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-45-npiggin@gmail.com
Use the existing TLB flushing logic to IPI the previous CPU and run the
necessary barriers before running a guest vCPU on a new physical CPU,
to do the necessary radix GTSE barriers for handling the case of an
interrupted guest tlbie sequence.
This requires the vCPU TLB flush sequence that is currently just done
on one thread, to be expanded to ensure the other threads execute a
ptesync, because causing them to exit the guest will no longer cause a
ptesync by itself.
This results in more IPIs than the TLB flush logic requires, but it's
a significant win for common case scheduling when the vCPU remains on
the same physical CPU.
This saves about 520 cycles (nearly 10%) on a guest entry+exit micro
benchmark on a POWER9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-44-npiggin@gmail.com
Linux implements SPR save/restore including storage space for registers
in the task struct for process context switching. Make use of this
similarly to the way we make use of the context switching fp/vec save
restore.
This improves code reuse, allows some stack space to be saved, and helps
with avoiding VRSAVE updates if they are not required.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-39-npiggin@gmail.com
Use HFSCR facility disabling to implement demand faulting for TM, with
a hysteresis counter similar to the load_fp etc counters in context
switching that implement the equivalent demand faulting for userspace
facilities.
This speeds up guest entry/exit by avoiding the register save/restore
when a guest is not frequently using them. When a guest does use them
often, there will be some additional demand fault overhead, but these
are not commonly used facilities.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-38-npiggin@gmail.com
Use HFSCR facility disabling to implement demand faulting for EBB, with
a hysteresis counter similar to the load_fp etc counters in context
switching that implement the equivalent demand faulting for userspace
facilities.
This speeds up guest entry/exit by avoiding the register save/restore
when a guest is not frequently using them. When a guest does use them
often, there will be some additional demand fault overhead, but these
are not commonly used facilities.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-37-npiggin@gmail.com
Use CPU_FTR_P9_RADIX_PREFETCH_BUG to apply the workaround, to test for
DD2.1 and below processors. This saves a mtSPR in guest entry.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-35-npiggin@gmail.com
This moves PMU switch to guest as late as possible in entry, and switch
back to host as early as possible at exit. This helps the host get the
most perf coverage of KVM entry/exit code as possible.
This is slightly suboptimal for SPR scheduling point of view when the
PMU is enabled, but when perf is disabled there is no real difference.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-34-npiggin@gmail.com
Move register saving and loading from kvmhv_p9_guest_entry() into the HV
and nested entry handlers.
Accesses are scheduled to reduce mtSPR / mfSPR interleaving which
reduces SPR scoreboard stalls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-32-npiggin@gmail.com
Move the part of the guest entry which is specific to nested HV into its
own function. This is just refactoring.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-31-npiggin@gmail.com
Move the P9 guest/host register switching functions to the built-in
P9 entry code, and export it for nested to use as well.
This allows more flexibility in scheduling these supervisor privileged
SPR accesses with the HV privileged and PR SPR accesses in the low level
entry code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-30-npiggin@gmail.com
This juggles SPR switching on the entry and exit sides to be more
symmetric, which makes the next refactoring patch possible with no
functional change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-28-npiggin@gmail.com
Keep better track of the current SPR value in places where
they are to be loaded with a new context, to reduce expensive
mtSPR operations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-27-npiggin@gmail.com
Reduce the number of mfTB executed by passing the current timebase
around entry and exit code rather than read it multiple times.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-25-npiggin@gmail.com
Change dec_expires to be relative to the guest timebase, and allow
it to be moved into low level P9 guest entry functions, to improve
SPR access scheduling.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-23-npiggin@gmail.com
Small cleanup makes it a bit easier to match up entry and exit
operations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-22-npiggin@gmail.com
Moving the mtmsrd after the host SPRs are saved and before the guest
SPRs start to be loaded can prevent an SPR scoreboard stall (because
the mtmsrd is L=1 type which does not cause context synchronisation.
This is also now more convenient to combined with the mtmsrd L=0
instruction to enable facilities just below, but that is not done yet.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-21-npiggin@gmail.com
This reduces the number of mtmsrd required to enable facility bits when
saving/restoring registers, by having the KVM code set all bits up front
rather than using individual facility functions that set their particular
MSR bits.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-20-npiggin@gmail.com
Move the SPR update into its relevant helper function. This will
help with SPR scheduling improvements in later changes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-19-npiggin@gmail.com
Processors that support KVM HV do not require read-modify-write of
the CTRL SPR to set/clear their thread's runlatch. Just write 1 or 0
to it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-18-npiggin@gmail.com
The pmcregs_in_use field in the guest VPA can not be trusted to reflect
what the guest is doing with PMU SPRs, so the PMU must always be managed
(stopped) when exiting the guest, and SPR values set when entering the
guest to ensure it can't cause a covert channel or otherwise cause other
guests or the host to misbehave.
So prevent guest access to the PMU with HFSCR[PM] if pmcregs_in_use is
clear, and avoid the PMU SPR access on every partition switch. Guests
that set pmcregs_in_use incorrectly or when first setting it and using
the PMU will take a hypervisor facility unavailable interrupt that will
bring in the PMU SPRs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-16-npiggin@gmail.com
Rather than guest/host save/retsore functions, implement context switch
functions that take care of details like the VPA update for nested.
The reason to split these kind of helpers into explicit save/load
functions is mainly to schedule SPR access nicely, but PMU is a special
case where the load requires mtSPR (to stop counters) and other
difficulties, so there's less possibility to schedule those nicely. The
SPR accesses also have side-effects if the PMU is running, and in later
changes we keep the host PMU running as long as possible so this code
can be better profiled, which also complicates scheduling.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-15-npiggin@gmail.com
Implement the P9 path PMU save/restore code in C, and remove the
POWER9/10 code from the P7/8 path assembly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-14-npiggin@gmail.com
KVM PMU management code looks for particular frozen/disabled bits in
the PMU registers so it knows whether it must clear them when coming
out of a guest or not. Setting this up helps KVM make these optimisations
without getting confused. Longer term the better approach might be to
move guest/host PMU switching to the perf subsystem.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-12-npiggin@gmail.com
Provide a config option that controls the workaround added by commit
63279eeb7f93 ("KVM: PPC: Book3S HV: Always save guest pmu for guest
capable of nesting"). The option defaults to y for now, but is expected
to go away within a few releases.
Nested capable guests running with the earlier commit 178266389794
("KVM: PPC: Book3S HV Nested: Reflect guest PMU in-use to L0 when guest
SPRs are live") will now indicate the PMU in-use status of their guests,
which means the parent does not need to unconditionally save the PMU for
nested capable guests.
After this latest round of performance optimisations, this option costs
about 540 cycles or 10% entry/exit performance on a POWER9 nested-capable
guest.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
References: 178266389794 ("KVM: PPC: Book3S HV Nested: Reflect guest PMU in-use to L0 when guest SPRs are live")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-11-npiggin@gmail.com
HV interrupts may be taken with the MMU enabled when radix guests are
running. Enable LPCR[HAIL] on ISA v3.1 processors for radix guests.
Make this depend on the host LPCR[HAIL] being enabled. Currently that is
always enabled, but having this test means any issue that might require
LPCR[HAIL] to be disabled in the host will not have to be duplicated in
KVM.
This optimisation takes 1380 cycles off a NULL hcall entry+exit micro
benchmark on a POWER10.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-9-npiggin@gmail.com
Rather than have KVM look up the host timer and fiddle with the
irq-work internal details, have the powerpc/time.c code provide a
function for KVM to re-arm the Linux timer code when exiting a
guest.
This is implementation has an improvement over existing code of
marking a decrementer interrupt as soft-pending if a timer has
expired, rather than setting DEC to a -ve value, which tended to
cause host timers to take two interrupts (first hdec to exit the
guest, then the immediate dec).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-8-npiggin@gmail.com
mftb is serialising (dispatch next-to-complete) so it is heavy weight
for a mfspr. Avoid reading it multiple times in the entry or exit paths.
A small number of cycles delay to timers is tolerable.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-7-npiggin@gmail.com
There is no need to save away the host DEC value, as it is derived
from the host timer subsystem which maintains the next timer time,
so it can be restored from there.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-5-npiggin@gmail.com
The host Linux timer code arms the decrementer with the value
'decrementers_next_tb - current_tb' using set_dec(), which stores
val - 1 on Book3S-64, which is not quite the same as what KVM does
to re-arm the host decrementer when exiting the guest.
This shouldn't be a significant change, but it makes the logic match
and avoids this small extra change being brought into the next patch.
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-4-npiggin@gmail.com
The TIDR SPR only exists on POWER9. Avoid accessing it when the
feature bit for it is not set.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-3-npiggin@gmail.com
Commit 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest
context before enabling irqs") moved guest_exit() into the interrupt
protected area to avoid wrong context warning (or worse). The problem is
that tick-based time accounting has not yet been updated at this point
(because it depends on the timer interrupt firing), so the guest time
gets incorrectly accounted to system time.
To fix the problem, follow the x86 fix in commit 160457140187 ("Defer
vtime accounting 'til after IRQ handling"), and allow host IRQs to run
before accounting the guest exit time.
In the case vtime accounting is enabled, this is not required because TB
is used directly for accounting.
Before this patch, with CONFIG_TICK_CPU_ACCOUNTING=y in the host and a
guest running a kernel compile, the 'guest' fields of /proc/stat are
stuck at zero. With the patch they can be observed increasing roughly as
expected.
Fixes: e233d54d4d97 ("KVM: booke: use __kvm_guest_exit")
Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs")
Cc: stable@vger.kernel.org # 5.12+
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
[np: only required for tick accounting, add Book3E fix, tweak changelog]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211027142150.3711582-1-npiggin@gmail.com
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as they
do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is disabled
- bugfixes and cleanups, especially with respect to 1) vCPU reset and
2) choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmE2CIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMyqwf+Ky2WoThuQ9Ra0r/m8pUTAx5+gsAf
MmG24rNLE+26X0xuBT9Q5+etYYRLrRTWJvo5cgHooz7muAYW6scR+ho5xzvLTAxi
DAuoijkXsSdGoFCp0OMUHiwG3cgY5N7feTEwLPAb2i6xr/l6SZyCP4zcwiiQbJ2s
UUD0i3rEoNQ02/hOEveud/ENxzUli9cmmgHKXR3kNgsJClSf1fcuLnhg+7EGMhK9
+c2V+hde5y0gmEairQWm22MLMRolNZ5NL4kjykiNh2M5q9YvbHe5+f/JmENlNZMT
bsUQT6Ry1ukuJ0V59rZvUw71KknPFzZ3d6HgW4pwytMq6EJKiISHzRbVnQ==
=FCAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
