IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In order to support PRE_COPY, mlx5 driver transfers multiple states
(images) of the device. e.g.: the source VF can save and transfer
multiple states, and the target VF will load them by that order.
This patch implements the changes for the target VF to decompose the
header for each state and to write and load multiple states.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-13-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
During PRE_COPY the migration data FD may have a temporary "end of
stream" that is reached when the initial_bytes were read and no other
dirty data exists yet.
For instance, this may indicate that the device is idle and not
currently dirtying any internal state. When read() is done on this
temporary end of stream the kernel driver should return ENOMSG from
read(). Userspace can wait for more data or consider moving to
STOP_COPY.
To not block the user upon read() and let it get ENOMSG we add a new
state named MLX5_MIGF_STATE_PRE_COPY on the migration file.
In addition, we add the MLX5_MIGF_STATE_SAVE_LAST state to block the
read() once we call the last SAVE upon moving to STOP_COPY.
Any further error will be marked with MLX5_MIGF_STATE_ERROR and the user
won't be blocked.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-12-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio precopy ioctl returns an estimation of data available for
transferring from the device.
Whenever a user is using VFIO_MIG_GET_PRECOPY_INFO, track the current
state of the device, and if needed, append the dirty data to the
transfer FD data. This is done by saving a middle state.
As mlx5 runs the SAVE command asynchronously, make sure to query for
incremental data only once there is no active save command.
Running both in parallel, might end-up with a failure in the incremental
query command on un-tracked vhca.
Also, a middle state will be saved only after the previous state has
finished its SAVE command and has been fully transferred, this prevents
endless use resources.
Co-developed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As mentioned in the previous patches, mlx5 is transferring multiple
states when the PRE_COPY protocol is used. This states mechanism
requires the target VM to know the states' size in order to execute
multiple loads. Therefore, add SW header, with the needed information,
for each saved state the source VM is transferring to the target VM.
This patch implements the source VM handling of the headers, following
patch will implement the target VM handling of the headers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-10-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support PRE_COPY, mlx5 driver is transferring multiple
states (images) of the device. e.g.: the source VF can save and transfer
multiple states, and the target VF will load them by that order.
The device is saving three kinds of states:
1) Initial state - when the device moves to PRE_COPY state.
2) Middle state - during PRE_COPY phase via VFIO_MIG_GET_PRECOPY_INFO.
There can be multiple states of this type.
3) Final state - when the device moves to STOP_COPY state.
After moving to PRE_COPY state, user is holding the saving migf FD and
can use it. For example: user can start transferring data via read()
callback. Also, user can switch from PRE_COPY to STOP_COPY whenever he
sees it fits. This will invoke saving of final state.
This means that mlx5 VFIO device can be switched to STOP_COPY without
transferring any data in PRE_COPY state. Therefore, when the device
moves to STOP_COPY, mlx5 will store the final state on a dedicated queue
entry on the list.
Co-developed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-9-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Refactor to use queue based data chunks on the migration file.
The SAVE command adds a chunk to the tail of the queue while the read()
API finds the required chunk and returns its data.
In case the queue is empty but the state of the migration file is
MLX5_MIGF_STATE_COMPLETE, read() may not be blocked but will return 0 to
indicate end of file.
This is a step towards maintaining multiple images and their meta data
(i.e. headers) on the migration file as part of next patches from the
series.
Note:
At that point, we still use a single chunk on the migration file but
becomes ready to support multiple.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-8-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Refactor migration file state to be an emum which is mutual exclusive.
As of that dropped the 'disabled' state as 'error' is the same from
functional point of view.
Next patches from the series will extend this enum for other relevant
states.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch refactors MKEY usage such as its life cycle will be as of the
migration file instead of allocating/destroying it upon each
SAVE/LOAD command.
This is a preparation step towards the PRE_COPY series where multiple
images will be SAVED/LOADED.
We achieve it by having a new struct named mlx5_vhca_data_buffer which
holds the mkey and its related stuff as of sg_append_table,
allocated_length, etc.
The above fields were taken out from the migration file main struct,
into mlx5_vhca_data_buffer dedicated struct with the proper helpers in
place.
For now we have a single mlx5_vhca_data_buffer per migration file.
However, in coming patches we'll have multiple of them to support
multiple images.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch refactors PD usage such as its life cycle will be as of the
migration file instead of allocating/destroying it upon each SAVE/LOAD
command.
This is a preparation step towards the PRE_COPY series where multiple
images will be SAVED/LOADED and a single PD can be simply reused.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Enforce a single SAVE command at a time.
As the SAVE command is an asynchronous one, we must enforce running only
a single command at a time.
This will preserve ordering between multiple calls and protect from
races on the migration file data structure.
This is a must for the next patches from the series where as part of
PRE_COPY we may have multiple images to be saved and multiple SAVE
commands may be issued from different flows.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The optional PRE_COPY states open the saving data transfer FD before
reaching STOP_COPY and allows the device to dirty track internal state
changes with the general idea to reduce the volume of data transferred
in the STOP_COPY stage.
While in PRE_COPY the device remains RUNNING, but the saving FD is open.
Only if the device also supports RUNNING_P2P can it support PRE_COPY_P2P,
which halts P2P transfers while continuing the saving FD.
PRE_COPY, with P2P support, requires the driver to implement 7 new arcs
and exists as an optional FSM branch between RUNNING and STOP_COPY:
RUNNING -> PRE_COPY -> PRE_COPY_P2P -> STOP_COPY
A new ioctl VFIO_MIG_GET_PRECOPY_INFO is provided to allow userspace to
query the progress of the precopy operation in the driver with the idea it
will judge to move to STOP_COPY at least once the initial data set is
transferred, and possibly after the dirty size has shrunk appropriately.
This ioctl is valid only in PRE_COPY states and kernel driver should
return -EINVAL from any other migration state.
Compared to the v1 clarification, STOP_COPY -> PRE_COPY is blocked
and to be defined in future.
We also split the pending_bytes report into the initial and sustaining
values, e.g.: initial_bytes and dirty_bytes.
initial_bytes: Amount of initial precopy data.
dirty_bytes: Device state changes relative to data previously retrieved.
These fields are not required to have any bearing to STOP_COPY phase.
It is recommended to leave PRE_COPY for STOP_COPY only after the
initial_bytes field reaches zero. Leaving PRE_COPY earlier might make
things slower.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is only 1.8k, putting it in its own module is not really
necessary. The kconfig infrastructure is still there to completely remove
it for systems that are trying for small footprint.
Put it in the main vfio.ko module now that kbuild can support multiple .c
files.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/5-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We don't need a kconfig symbol for this, just directly test CONFIG_EEH in
the few places that need it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As with the previous patch EEH is always enabled if SPAPR_TCE_IOMMU, so
move this last bit of code into the main module.
Now that this function only processes VFIO_EEH_PE_OP remove a level of
indenting as well, it is only called by a case statement that already
checked VFIO_EEH_PE_OP.
This eliminates an unnecessary module and SPAPR code in a global header.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The PPC64 kconfig is a bit of a rats nest, but it turns out that if
CONFIG_SPAPR_TCE_IOMMU is on then EEH must be too:
config SPAPR_TCE_IOMMU
bool "sPAPR TCE IOMMU Support"
depends on PPC_POWERNV || PPC_PSERIES
select IOMMU_API
help
Enables bits of IOMMU API required by VFIO. The iommu_ops
is not implemented as it is not necessary for VFIO.
config PPC_POWERNV
select FORCE_PCI
config PPC_PSERIES
select FORCE_PCI
config EEH
bool
depends on (PPC_POWERNV || PPC_PSERIES) && PCI
default y
So, just open code the call to eeh_enabled() into tce_iommu_ioctl().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_spapr_pci_eeh_open/release() functions are one line wrappers
around an arch function. Just call them directly. This eliminates some
weird exported symbols that don't need to exist.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/1-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This prepares for compiling out vfio group after vfio device cdev is
added. No vfio_group decode code should be in vfio_main.c, and neither
device->group reference should be in vfio_main.c.
No functional change is intended.
Link: https://lore.kernel.org/r/20221201145535.589687-11-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yu He <yu.he@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To use group helpers instead of opening group related code in the
API. This prepares moving group specific code out of vfio_main.c.
Link: https://lore.kernel.org/r/20221201145535.589687-10-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This wraps the init/clean code of vfio group global variable to be
helpers, and prepares for further moving vfio group specific code into
separate file.
As container is used by group, so vfio_container_init/cleanup() is moved
into vfio_group_init/cleanup().
Link: https://lore.kernel.org/r/20221201145535.589687-9-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This refactor makes the vfio_device_open() to accept device, iommufd_ctx
pointer and kvm pointer. These parameters are generic items in today's
group path and future device cdev path. Caller of vfio_device_open()
should take care the necessary protections. e.g. the current group path
need to hold the group_lock to ensure the iommufd_ctx and kvm pointer are
valid.
This refactor also wraps the group spefcific codes in the device open and
close paths to be paired helpers like:
- vfio_device_group_open/close(): call vfio_device_open/close()
- vfio_device_group_use/unuse_iommu(): this pair is container specific.
iommufd vs. container is selected
in vfio_device_first_open().
Such helpers are supposed to be moved to group.c. While iommufd related
codes will be kept in the generic helpers since future device cdev path
also need to handle iommufd.
Link: https://lore.kernel.org/r/20221201145535.589687-8-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Then move group related logic into vfio_device_open_file(). Accordingly
introduce a vfio_device_close() to pair up.
Link: https://lore.kernel.org/r/20221201145535.589687-7-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This makes the DMA unmap callback registration to container be consistent
across the vfio iommufd compat mode and the legacy container mode.
In the vfio iommufd compat mode, this registration is done in the
vfio_iommufd_bind() when creating access which has an unmap callback. This
is prior to calling the open_device() op. The existing mdev drivers have
been converted to be OK with this order. So it is ok to swap the order of
vfio_device_container_register() and open_device() for legacy mode.
This also prepares for further moving group specific code into separate
source file.
Link: https://lore.kernel.org/r/20221201145535.589687-6-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This avoids referencing device->group in __vfio_register_dev().
Link: https://lore.kernel.org/r/20221201145535.589687-5-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This avoids decoding group fields in the common functions used by
vfio_device registration, and prepares for further moving the vfio group
specific code into separate file.
Link: https://lore.kernel.org/r/20221201145535.589687-4-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This avoids opening group specific code in __vfio_register_dev() for the
sanity check if an (existing) group is not corrupted by having two copies
of the same struct device in it. It also simplifies the error unwind for
this sanity check since the failure can be detected in the group
allocation.
This also prepares for moving the group specific code into separate
group.c.
Grabbed from:
https://lore.kernel.org/kvm/20220922152338.2a2238fe.alex.williamson@redhat.com/
Link: https://lore.kernel.org/r/20221201145535.589687-3-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
The vfio.group_lock is now only used to serialize vfio_group creation and
destruction, we don't need a micro-optimization of searching, unlocking,
then allocating and searching again. Just hold the lock the whole time.
Grabbed from:
https://lore.kernel.org/kvm/20220922152338.2a2238fe.alex.williamson@redhat.com/
Link: https://lore.kernel.org/r/20221201145535.589687-2-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Commit f38044e5ef58 ("vfio/iova_bitmap: Fix PAGE_SIZE unaligned bitmaps")
had fixed the unaligned bitmaps by capping the remaining iterable set at
the start of the bitmap. Although, that mistakenly worked around
iova_bitmap_set() incorrectly setting bits across page boundary.
Fix this by reworking the loop inside iova_bitmap_set() to iterate over a
range of bits to set (cur_bit .. last_bit) which may span different pinned
pages, thus updating @page_idx and @offset as it sets the bits. The
previous cap to the first page is now adjusted to be always accounted
rather than when there's only a non-zero pgoff.
While at it, make @page_idx , @offset and @nbits to be unsigned int given
that it won't be more than 512 and 4096 respectively (even a bigger
PAGE_SIZE or a smaller struct page size won't make this bigger than the
above 32-bit max). Also, delete the stale kdoc on Return type.
Cc: Avihai Horon <avihaih@nvidia.com>
Fixes: f38044e5ef58 ("vfio/iova_bitmap: Fix PAGE_SIZE unaligned bitmaps")
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20221129131235.38880-1-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a kconfig CONFIG_VFIO_CONTAINER that controls compiling the container
code. If 'n' then only iommufd will provide the container service. All the
support for vfio iommu drivers, including type1, will not be built.
This allows a compilation check that no inappropriate dependencies between
the device/group and container have been created.
Link: https://lore.kernel.org/r/9-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The miscdev is in container.c, so should these related MODULE_ALIAS
statements. This is necessary for the next patch to be able to fully
disable /dev/vfio/vfio.
Fixes: cdc71fe4ecbf ("vfio: Move container code into drivers/vfio/container.c")
Link: https://lore.kernel.org/r/8-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Reported-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Emulated VFIO devices are calling vfio_register_emulated_iommu_dev() and
consist of all the mdev drivers.
Like the physical drivers, support for iommufd is provided by the driver
supplying the correct standard ops. Provide ops from the core that
duplicate what vfio_register_emulated_iommu_dev() does.
Emulated drivers are where it is more likely to see variation in the
iommfd support ops. For instance IDXD will probably need to setup both a
iommfd_device context linked to a PASID and an iommufd_access context to
support all their mdev operations.
Link: https://lore.kernel.org/r/7-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This creates the iommufd_device for the physical VFIO drivers. These are
all the drivers that are calling vfio_register_group_dev() and expect the
type1 code to setup a real iommu_domain against their parent struct
device.
The design gives the driver a choice in how it gets connected to iommufd
by providing bind_iommufd/unbind_iommufd/attach_ioas callbacks to
implement as required. The core code provides three default callbacks for
physical mode using a real iommu_domain. This is suitable for drivers
using vfio_register_group_dev()
Link: https://lore.kernel.org/r/6-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This makes VFIO_GROUP_SET_CONTAINER accept both a vfio container FD and an
iommufd.
In iommufd mode an IOAS will exist after the SET_CONTAINER, but it will
not be attached to any groups.
For VFIO this means that the VFIO_GROUP_GET_STATUS and
VFIO_GROUP_FLAGS_VIABLE works subtly differently. With the container FD
the iommu_group_claim_dma_owner() is done during SET_CONTAINER but for
IOMMUFD this is done during VFIO_GROUP_GET_DEVICE_FD. Meaning that
VFIO_GROUP_FLAGS_VIABLE could be set but GET_DEVICE_FD will fail due to
viability.
As GET_DEVICE_FD can fail for many reasons already this is not expected to
be a meaningful difference.
Reorganize the tests for if the group has an assigned container or iommu
into a vfio_group_has_iommu() function and consolidate all the duplicated
WARN_ON's etc related to this.
Call container functions only if a container is actually present on the
group.
Link: https://lore.kernel.org/r/5-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd doesn't establish the iommu_domains until after the device FD is
opened, even if the container has been set. This design is part of moving
away from the group centric iommu APIs.
This is fine, except that the normal sequence of establishing the kvm
wbinvd won't work:
group = open("/dev/vfio/XX")
ioctl(group, VFIO_GROUP_SET_CONTAINER)
ioctl(kvm, KVM_DEV_VFIO_GROUP_ADD)
ioctl(group, VFIO_GROUP_GET_DEVICE_FD)
As the domains don't start existing until GET_DEVICE_FD. Further,
GET_DEVICE_FD requires that KVM_DEV_VFIO_GROUP_ADD already be done as that
is what sets the group->kvm and thus device->kvm for the driver to use
during open.
Now that we have device centric cap ops and the new
IOMMU_CAP_ENFORCE_CACHE_COHERENCY we know what the iommu_domain will be
capable of without having to create it. Use this to compute
vfio_file_enforced_coherent() and resolve the ordering problems.
VFIO always tries to upgrade domains to enforce cache coherency, it never
attaches a device that supports enforce cache coherency to a less capable
domain, so the cap test is a sufficient proxy for the ultimate
outcome. iommufd also ensures that devices that set the cap will be
connected to enforcing domains.
Link: https://lore.kernel.org/r/4-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions don't really assign anything anymore, they just increment
some refcounts and do a sanity check. Call them
vfio_group_[un]use_container()
Link: https://lore.kernel.org/r/3-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The only thing this function does is assert the group has an assigned
container and incrs refcounts.
The overall model we have is that once a container_users refcount is
incremented it cannot be de-assigned from the group -
vfio_group_ioctl_unset_container() will fail and the group FD cannot be
closed.
Thus we do not need to check this on every device FD open, just the
first. Reorganize the code so that only the first open and last close
manages the container.
Link: https://lore.kernel.org/r/2-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This error unwind is getting complicated. Move all the code into two
pair'd function. The functions should be called when the open_count == 1
after incrementing/before decrementing.
Link: https://lore.kernel.org/r/1-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The devnode() in struct class should not be modifying the device that is
passed into it, so mark it as a const * and propagate the function
signature changes out into all relevant subsystems that use this
callback.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Justin Sanders <justin@coraid.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: John Stultz <jstultz@google.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sean Young <sean@mess.org>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Xie Yongji <xieyongji@bytedance.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Eli Cohen <elic@nvidia.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: alsa-devel@alsa-project.org
Cc: dri-devel@lists.freedesktop.org
Cc: kvm@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-block@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20221123122523.1332370-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nothing in this file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20221113202428.826924043@linutronix.de
Fix a typo in mlx5vf_cmd_load_vhca_state() to use the 'load' memory
layout.
As in/out sizes are equal for save and load commands there wasn't any
functional issue.
Fixes: f1d98f346ee3 ("vfio/mlx5: Expose migration commands over mlx5 device")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221106174630.25909-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add an option to get migration data size by introducing a new migration
feature named VFIO_DEVICE_FEATURE_MIG_DATA_SIZE.
Upon VFIO_DEVICE_FEATURE_GET the estimated data length that will be
required to complete STOP_COPY is returned.
This option may better enable user space to consider before moving to
STOP_COPY whether it can meet the downtime SLA based on the returned
data.
The patch also includes the implementation for mlx5 and hisi for this
new option to make it feature complete for the existing drivers in this
area.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20221106174630.25909-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_pci_dev_set_needs_reset() inspects the open_count of every device
in the set to determine whether a reset is allowed. The current device
always has open_count == 1 within vfio_pci_core_disable(), effectively
disabling the reset logic. This field is also documented as private in
vfio_device, so it should not be used to determine whether other devices
in the set are open.
Checking for vfio_device_set_open_count() > 1 on the device set fixes
both issues.
After commit 2cd8b14aaa66 ("vfio/pci: Move to the device set
infrastructure"), failure to create a new file for a device would cause
the reset to be skipped due to open_count being decremented after
calling close_device() in the error path.
After commit eadd86f835c6 ("vfio: Remove calls to
vfio_group_add_container_user()"), releasing a device would always skip
the reset due to an ordering change in vfio_device_fops_release().
Failing to reset the device leaves it in an unknown state, potentially
causing errors when it is accessed later or bound to a different driver.
This issue was observed with a Radeon RX Vega 56 [1002:687f] (rev c3)
assigned to a Windows guest. After shutting down the guest, unbinding
the device from vfio-pci, and binding the device to amdgpu:
[ 548.007102] [drm:psp_hw_start [amdgpu]] *ERROR* PSP create ring failed!
[ 548.027174] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[ 548.027242] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
[ 548.027306] amdgpu 0000:0a:00.0: amdgpu: amdgpu_device_ip_init failed
[ 548.027308] amdgpu 0000:0a:00.0: amdgpu: Fatal error during GPU init
Fixes: 2cd8b14aaa66 ("vfio/pci: Move to the device set infrastructure")
Fixes: eadd86f835c6 ("vfio: Remove calls to vfio_group_add_container_user()")
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221110014027.28780-4-ajderossi@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The open count of a device set is the sum of the open counts of all
devices in the set. Drivers can use this value to determine whether
shared resources are in use without tracking them manually or accessing
the private open_count in vfio_device.
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20221110014027.28780-3-ajderossi@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In vfio_device_open(), vfio_device_container_register() is always called
when open_count == 1. On error, vfio_device_container_unregister() is
only called when open_count == 1 and close_device is set. This leaks a
registration for devices without a close_device implementation.
In vfio_device_fops_release(), vfio_device_container_unregister() is
called unconditionally. This can cause a device to be unregistered
multiple times.
Treating container device registration/unregistration uniformly (always
when open_count == 1) fixes both issues.
Fixes: ce4b4657ff18 ("vfio: Replace the DMA unmapping notifier with a callback")
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20221110014027.28780-2-ajderossi@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With the "mess" sorted out, we should be able to inline the
vfio_free_device call introduced by commit cb9ff3f3b84c
("vfio: Add helpers for unifying vfio_device life cycle")
and remove them from driver release callbacks.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> # vfio-ap part
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-8-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that we have a reasonable separation of structs that follow
the subchannel and mdev lifecycles, there's no reason we can't
call the official vfio_alloc_device routine for our private data,
and behave like everyone else.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-7-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
iova_bitmap_set() doesn't consider the end of the page boundary when the
first bitmap page offset isn't zero, and wrongly changes the consecutive
page right after. Consequently this leads to missing dirty pages from
reported by the device as seen from the VMM.
The current logic iterates over a given number of base pages and clamps it
to the remaining indexes to iterate in the last page. Instead of having to
consider extra pages to pin (e.g. first and extra pages), just handle the
first page as its own range and let the rest of the bitmap be handled as if
it was base page aligned.
This is done by changing iova_bitmap_mapped_remaining() to return PAGE_SIZE
- pgoff (on the first bitmap page), and leads to pgoff being set to 0 on
following iterations.
Fixes: 58ccf0190d19 ("vfio: Add an IOVA bitmap support")
Reported-by: Avihai Horon <avihaih@nvidia.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20221025193114.58695-3-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
kzalloc/kzfree are used so include `slab.h`. While it happens to work
without it, due to commit 8b9f3ac5b01d ("fs: introduce alloc_inode_sb() to
allocate filesystems specific inode") which indirectly includes via:
. ./include/linux/mm.h
.. ./include/linux/huge_mm.h
... ./include/linux/fs.h
.... ./include/linux/slab.h
Make it explicit should any of its indirect dependencies be dropped/changed
for entirely different reasons as it was the cause prior to commit above
recently (i.e. <= v5.18).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20221025193114.58695-2-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The ACPI _RST method has no return value, there's no need to pass a return
buffer to acpi_evaluate_object().
Fixes: d30daa33ec1d ("vfio: platform: call _RST method when using ACPI")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20221018152825.891032-1-rafaelmendsr@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since pci provides the helper macro module_pci_driver(), we may replace
the module_init/exit with it.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220922123507.11222-1-shangxiaojing@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
