IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fix the etm node hex address to lower case for matching regexp
specification and removing the additional warning that looks like:
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dt.yaml: /: 'etm@73C000' does not
match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$',
'pinctrl-[0-9]+'
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As suggested by Arnd Bergmann, mmc-aliases are supposed to be
board-specific, so move the newly added general aliases to
the board-level on rv1108-based boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-2-heiko@sntech.de
As suggested by Arnd Bergmann, mmc-aliases are supposed to be
board-specific, so move the newly added general aliases to
the board-level on rk322x-based boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-1-heiko@sntech.de
This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount
matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger
for the two devices.
-----BEGIN PGP SIGNATURE-----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=M5GB
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm dts updates for v5.13
This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount
matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger
for the two devices.
* tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-klte: Add bluetooth support
ARM: dts: qcom: msm8974: add blsp2_uart8
ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level
ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level
ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMU
Link: https://lore.kernel.org/r/20210409162359.776076-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The kernelci.org bot reports a build time regression:
arch/arm/boot/dts/ep7209.dtsi:187.17-192.4: Warning (interrupts_property): /keypad: Missing interrupt-parent
There is only one interrupt controller in this SoC, so I assume this
is the parent.
Fixes: 2bd86203acf3 ("ARM: dts: clps711x: Add keypad node")
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtc warns about a mismatched address:
arch/arm/boot/dts/armada-385-atl-x530.dts:171.14-199.4: Warning (spi_bus_reg): /soc/spi@10680/spi-flash@0: SPI bus unit address format error, expected "1"
I assume the "reg" property is correct here, so adjust the unit address
accordingly.
Fixes: c6dfc019c239 ("ARM: dts: mvebu: Add device tree for ATL-x530 Board")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These patches fix the ASPEED LPC bindings and LPC-related device drivers
so in the future the KCS driver can properly use the hardware.
-----BEGIN PGP SIGNATURE-----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=U2zj
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/drivers
ASPEED LPC updates for 5.13
These patches fix the ASPEED LPC bindings and LPC-related device drivers
so in the future the KCS driver can properly use the hardware.
* tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
Link: https://lore.kernel.org/r/CACPK8Xcb12LsVr7CUaXXjQskKbVjb7x+jgueG1Hik-kBPWtDSg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Supermicro X9SCi-LN4F is a server mainboard featuring the WPCM450
BMC. This patch adds a minimal devicetree for Linux running on the BMC.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-10-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
The WPCM450 is an older BMC SoC in the Nuvoton NPCM family, originally
marketed as Winbond WPCM450.
This patch adds a devicetree with basic functionality.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-9-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
The WPCM450 is an older BMC SoC in the Nuvoton NPCM family, originally
marketed as Winbond WPCM450.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-6-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
The LPC controller has no concept of the BMC and the Host partitions.
A concrete instance is that the HICRB[5:4] are for the I/O port address
configurtaion of KCS channel 1/2. However, the KCS driver cannot access
HICRB for channel 1/2 initialization via syscon regmap interface due to
the parition boundary. (i.e. offset 80h)
In addition, for the HW design backward compatibility, a newly added HW
control bit could be located at any reserved one over the LPC addressing
space. Thereby, this patch removes the lpc-bmc and lpc-host child node
and thus the LPC partitioning.
Note that this change requires the synchronization between device tree
change and the driver change. To prevent the misuse of old devicetrees
with new drivers, or vice versa, the v2 compatible strings are adopted
for the LPC device as listed:
"aspeed,ast2400-lpc-v2"
"aspeed,ast2500-lpc-v2"
"aspeed,ast2600-lpc-v2"
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210319062752.145730-2-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add support for ATL-x530 Board (Armada 38x based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYG4XpAAKCRALBhiOFHI7
1ZoaAKCte3+j+CRoH3fBgBRTd5aIOBHd/QCeO8D+KkqxlnjVSo3XDt32cZQWq20=
=xk5y
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.13 (part 1)
Add support for ATL-x530 Board (Armada 38x based)
* tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: mvebu: Add device tree for ATL-x530 Board
Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update defconfig to have nefilter available as loadable modules
to make the defconfig more usable for networked devices. And we now
select SIMPLE_PM_BUS so it can be dropped. And some devices use
EEPROM_AT25 so let's add it as a loadable module.
-----BEGIN PGP SIGNATURE-----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=INyD
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.13
Update defconfig to have nefilter available as loadable modules
to make the defconfig more usable for networked devices. And we now
select SIMPLE_PM_BUS so it can be dropped. And some devices use
EEPROM_AT25 so let's add it as a loadable module.
* tag 'omap-for-v5.13/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Add AT25 EEPROM module
ARM: omap2plus_defconfig: Enable Netfilter components as modules
ARM: omap2plus_defconfig: Update for dropped simple-pm-bus
Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Update Krzysztof Kozlowski's email address in Maintainers.
2. Replace deprecated pwm_request() with pwm_get() in S3C24xx.
3. Correct kerneldoc.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmBtVmAQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1/l4EACJb+k+/hhVpqqSclbPZi44DCTn78kvjPe6
zAmQppZwhO8I/KOG8SPvJrEI2wfsozV0yyUYvlunwQC6Jq7qIfCBputTSOSaE59H
qmXNU7ZLGhsjSQE3Jamkn6BQgAyOUKPgvhYomCIAhJ/jSdMuE3NHrQzxK2g4eEs4
bF1RSLzb1vdn5sHSxnAsEih9wC80cgMW91OiAZAspXPKustqaEya+8j7bjWSqC33
3o5SQtgGmxAo1SirtsVbqrATE9rKsMNoP/9IKBbw3J4kr6i5lsXpogfz7jTXw98M
ccmRmg/xpsSzeibHCJ0clSowjVBnHQwi1ddo6NgFFwP8eeK1SCKif282dYSrNuCt
PtSoc63VUr96VmGlyrTO1gKt9OXl7vl36KU+gJjF2+UqGWbnIqDsfMxI9TBxBiEe
7W2KK0BlX37V/vFx1PifmiOQt95Yg6M6U8mfGCqcJfSd9qwO1VfXtu3NbyJsBoTa
6MU9vFdRyy12v7XroV7Z5m47ka+XoV8VKk8ZEIqkszxWzXZizbaBKlrI9hgriGyv
OheEEkeJdnEyJtQMW+TNf7iHzUUWKr1y4OBHZkYsVBVoqNejHVK/hNa/v96ATLCP
NWLB2yFMZNQZVrP7yuMgbn5ihJEY3LOQBOiqNo0rV49WpmpZsWxsOAga9WGhkGa1
np2LZkFXdg==
=X0tK
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung mach/soc changes for v5.13
1. Update Krzysztof Kozlowski's email address in Maintainers.
2. Replace deprecated pwm_request() with pwm_get() in S3C24xx.
3. Correct kerneldoc.
* tag 'samsung-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos: correct kernel doc in platsmp
ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
MAINTAINERS: use Krzysztof Kozlowski's Canonical address
Link: https://lore.kernel.org/r/20210407065828.7213-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Minor non-urgent fixes for issues found by robots and few typo fixes:
- Use DEFINE_DEBUGFS_ATTRIBUTE
- Add missing of_node_put()
- Use true and false for bool variable
- Use DEFINE_SPINLOCK
- Fix incorrect kerneldoc usage
-----BEGIN PGP SIGNATURE-----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=+8vs
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
SoC changes for omaps for v5.13
Minor non-urgent fixes for issues found by robots and few typo fixes:
- Use DEFINE_DEBUGFS_ATTRIBUTE
- Add missing of_node_put()
- Use true and false for bool variable
- Use DEFINE_SPINLOCK
- Fix incorrect kerneldoc usage
* tag 'omap-for-v5.13/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
ARM: OMAP2+: use true and false for bool variable
ARM: OMAP2+: add missing call to of_node_put()
ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix swapped mmc device order also for omap3 that got changed with the
recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
should be board specific, all the mmc device instances are all there in
the SoC, and we do probe them by default so that PM runtime can idle the
devices if left enabled from the bootloader.
Also included are two compiler warning fixes.
-----BEGIN PGP SIGNATURE-----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=F8MV
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.12-rc cycle
Fix swapped mmc device order also for omap3 that got changed with the
recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
should be board specific, all the mmc device instances are all there in
the SoC, and we do probe them by default so that PM runtime can idle the
devices if left enabled from the bootloader.
Also included are two compiler warning fixes.
* tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix uninitialized sr_inst
ARM: dts: Fix swapped mmc order for omap3
ARM: OMAP2+: Fix warning for omap_init_time_of()
ARM: OMAP4: PM: update ROM return address for OSWR and OFF
ARM: OMAP4: Fix PMIC voltage domains for bionic
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
Link: https://lore.kernel.org/r/pull-1617702755-711306@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is a timer wrap issue on dra7 for the ARM architected timer.
In a typical clock configuration the timer fails to wrap after 388 days.
To work around the issue, we need to use timer-ti-dm percpu timers instead.
Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
the issue if the dtb is not configured properly.
Let's do this as a single patch so it can be backported to v5.8 and later
kernels easily. Note that this patch depends on earlier timer-ti-dm
systimer posted mode fixes, and a preparatory clockevent patch
"clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue".
For more information, please see the errata for "AM572x Sitara Processors
Silicon Revisions 1.1, 2.0":
https://www.ti.com/lit/er/sprz429m/sprz429m.pdf
The concept is based on earlier reference patches done by Tero Kristo and
Keerthy.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210323074326.28302-3-tony@atomide.com
A previous refactoring moved the chip select number handling
to the SPI core and we missed a leftover platform data user
in the ST spear platform. The spear is not using this
chipselect or PL022 for anything and should be using device
tree like the rest of the platform so just delete the
offending platform data.
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210408075045.3435046-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.
Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210330020808.830-1-Nichole_Wang@wistron.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The 1S4U version of the Rainier system has only 4 fans. Create a new
tree, include the 4U version, and delete the 2 extra fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-21-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This commit adds support for-
- Presence GPIOs
- I2C control GPIOs
- Op-panel GPIOs (ex PHR)
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-19-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the i2c/pmbus power supply devices to the everest device tree.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-17-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the
4 GPIO fan presence inputs.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add additional CFAMs and re-number the existing engines for the
extra processors present on the Everest system.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-15-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the max31785 configuration at address 0x52 on i2c14 behind mux0
channel 3.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-14-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested and able to bound the devices with i2c driver.
Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The 4U fans didn't have the correct properties since the fan nodes
were redefined. Fix this by referencing each fan individually and
adding the differences to the 4U fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This commit adds presence detect GPIO chips for various FRUs on
Rainier. Also, correct the I2C address for the tca9554.
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Rainier has two dual-chip modules and therefore four CFAMs with their
associated engines. Add these to the devicetree with the i2c busses
that have devices on them.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add a gpio-keys-polled section to the Rainier device tree for the fan
presence signals on the PCA9552 I2C device on bus 7.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
These LEDs are directly connected to the BMC's GPIO bank.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add device tree file for x530 board. This has an Armada 385 SoC. Has
NAND-flash for user storage and SPI for booting. Covers majority of x530
and GS980MX variants.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
- two little fixes (typo, W=1)
- a change in gpio button keycode for recent boards
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYG2aoQAKCRAfOrpwrNPN
DAJQAP9r4FW4jrde3KaAhzlY+H/SYLN9Vi4LGha5pgF9mT7P1wEAiUdT9TDFoWxF
154HT95ZCBHgJE9xCENm/8EWQYirjgg=
=A/Wn
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 dt for 5.13:
- two little fixes (typo, W=1)
- a change in gpio button keycode for recent boards
* tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2: add ETB and ETM unit name
ARM: dts: at91: change the key code of the gpio key
ARM: dts: at91: Fix a typo
Link: https://lore.kernel.org/r/20210407114415.13180-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Configure battery charger and front camera on GT-I9100 phone.
2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags
to match real type of interrupt coming from the device.
3. Correct DTS with dtschema. This brings back the commit adding input
clock to CMU in Exynos4412 Odroid which was reverted some time ago
due to unsupported deferred probes (now supported and tested).
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmBtVfYQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1xRMEACNBme83LtvRfv1v88JH4lw2YdW4cQ+RAJW
1cZ0pgveUCrfOYljI40RNV0wc1JQe75LJdxFLzrd2dHQ51+uM8lAECpdeDt1sFDH
azdBsfXN8HTQTagmOAw/jzvxD/lqg1J7u/A963l27UPmDDNXCvneLO3o4/JUPB4F
eGTv5p5SF32I4/6thdjqH5AVtSgCXhv3A0JaRsYElVymxB7t63Zt3H2xanwyjzDZ
znHdmQ0Oj0nuPqxFT+vcYOpHNE9Q+hzfk5CECVXSxF/3cdX4hlmsdT1Yi6WDVvxa
xJ+cMLZ/C8+LObkrCe7HR5W15yQb5KOQT3EtR+nV+dr5lww5/mGJXrHUKmKArcDL
wKQ19IbpGm2QRVNt+7fbuLBUPnquvuCGlw9a4UI5Pt/5POoEtXWYBue3cxjStI/4
NGQZpktxC8UE2sgvCUjkk5HvWAhFyKZfpFrO4tM+gWrq1h6Xe5yx+pMXNF8WsvcB
UdFeFCEDCiYrCR3x3l77CFqMePlmYBUz1A0XxM0dIXLvdgSPkhbL7OfzsJvC3S3l
Ffx1BgZINaJ2AmW7yk0JT/QkmM3nS43k0Opc58RGqTsrRBCFK2+8DQTLsG94udGd
3ml6xcyft7nlwP3X3puWIMMHqRbZ1NHeogKRgda/u8C33f5g4CIcjZUxUUlpLaPJ
teNZM8G9fQ==
=5sWm
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.13
1. Configure battery charger and front camera on GT-I9100 phone.
2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags
to match real type of interrupt coming from the device.
3. Correct DTS with dtschema. This brings back the commit adding input
clock to CMU in Exynos4412 Odroid which was reverted some time ago
due to unsupported deferred probes (now supported and tested).
* tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add front camera support to I9100
ARM: dts: exynos: white-space cleanups
ARM: dts: exynos: replace deprecated NTC/Murata compatibles
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family
ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100
ARM: dts: exynos: add charger supply for I9100
Link: https://lore.kernel.org/r/20210407065828.7213-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mostly configures addtional devices for various boards, and
updates the gpio line names for beagle boards so userspace can
optionally find the right lines:
- Use unique gpio line names for am335x-pocketbeagle
- Update omap3-echo led configuration and add ath6kl node
- Fix indentation for am3 tscadc node
- Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing
- Use unique gpio line names for am335x-boneblack.dts
-----BEGIN PGP SIGNATURE-----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=xF+N
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.13
Mostly configures addtional devices for various boards, and
updates the gpio line names for beagle boards so userspace can
optionally find the right lines:
- Use unique gpio line names for am335x-pocketbeagle
- Update omap3-echo led configuration and add ath6kl node
- Fix indentation for am3 tscadc node
- Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing
- Use unique gpio line names for am335x-boneblack.dts
* tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-boneblack.dts: unique gpio-line-names
ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing
ARM: dts: am33xx-l4: fix tscadc@0 node indentation
ARM: dts: omap3-echo: Add ath6kl node
ARM: dts: omap3-echo: Update LED configuration
ARM: dts: am335x-pocketbeagle: unique gpio-line-names
Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Missing "chosen" node can cause issues when booting a kernel
with a boot-loader that doesn't create a chosen node if this
isn't present in the DTB since the decompressor relies on a
pre-existing chosen node to be available to insert the command
line and merge other ATAGS info.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Link: https://lore.kernel.org/r/20210405051658.26779-5-shc_work@mail.ru'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
