IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This fixes mkfs/mount/check failures due to race with systemd-udevd
scan.
During the device scan initiated by systemd-udevd, other user space
EXCL operations such as mkfs, mount, or check may get blocked and result
in a "Device or resource busy" error. This is because the device
scan process opens the device with the EXCL flag in the kernel.
Two reports were received:
- btrfs/179 test case, where the fsck command failed with the -EBUSY
error
- LTP pwritev03 test case, where mkfs.vfs failed with
the -EBUSY error, when mkfs.vfs tried to overwrite old btrfs filesystem
on the device.
In both cases, fsck and mkfs (respectively) were racing with a
systemd-udevd device scan, and systemd-udevd won, resulting in the
-EBUSY error for fsck and mkfs.
Reproducing the problem has been difficult because there is a very
small window during which these userspace threads can race to
acquire the exclusive device open. Even on the system where the problem
was observed, the problem occurrences were anywhere between 10 to 400
iterations and chances of reproducing decreases with debug printk()s.
However, an exclusive device open is unnecessary for the scan process,
as there are no write operations on the device during scan. Furthermore,
during the mount process, the superblock is re-read in the below
function call chain:
btrfs_mount_root
btrfs_open_devices
open_fs_devices
btrfs_open_one_device
btrfs_get_bdev_and_sb
So, to fix this issue, removes the FMODE_EXCL flag from the scan
operation, and add a comment.
The case where mkfs may still write to the device and a scan is running,
the btrfs signature is not written at that time so scan will not
recognize such device.
Reported-by: Sherry Yang <sherry.yang@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202303170839.fdf23068-oliver.sang@intel.com
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to
combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When
using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for
each partition found on the loop device after the second ioctl(), but
when using LOOP_CONFIGURE, no such uevent was being sent.
In the old setup, uevents are disabled for LOOP_SET_FD, but not for
LOOP_SET_STATUS64. This makes sense, as it prevents uevents being
sent for a partially configured device during LOOP_SET_FD - they're
only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE,
uevents were disabled for the entire operation, so that final
notification was never issued. To fix this, reduce the critical
section to exclude the loop_reread_partitions() call, which causes
the uevents to be issued, to after uevents are re-enabled, matching
the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination.
I noticed this because Busybox's losetup program recently changed from
using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke
my setup, for which I want a notification from the kernel any time a
new partition becomes available.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
[hch: reduced the critical section]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl")
Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Fix VM hang in case of timer delta being zero
ARM:
* Fixes for the MMU:
* Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
* Disable interrupts when walking user page tables to protect against
the page table being freed
* Read the MTE permissions for the VMA within the mmap lock critical
section, avoiding the use of a potentally stale VMA pointer
* Fixes for the vPMU:
* Return the sum of the current perf event value and PMC snapshot for
reads from userspace
* Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
otherwise lead to userspace erroneously resetting the vPMU during VM
save/restore
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmQh12wUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMPyAgAhe9P5efFlkg/N/BUoxCdiQjhTEGO
BbNtZFbSgdqsTA0No5sjSsq8+dYuj4IpYHxvTRNXffxpn/6x736x9ff6fH3QwY0P
n65q37m3XrBzbaUv2XlX6l4GJC/KHWpXsawVszmnQpw8wYUYglo9JWnWVvpo/vLV
byWXcG9Rt0MQVnV13bYtjnpdNYCdVuhZuvjDBvbBa2I9BRKShvWyzcRcc48K1RNq
UI5PCEb8c2NUOB/6b9lRkEaNYLssVLOxpI3abGJP+IVSl/WE+hgCbFpz7ZkYwt79
AYm4wnZTSKBMQb5P2IOlgkfasvEyFiZ4Jj7x3RLXcXSWIB6g0J20iNasYg==
=qX9k
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix VM hang in case of timer delta being zero
ARM:
- MMU fixes:
- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
- Disable interrupts when walking user page tables to protect
against the page table being freed
- Read the MTE permissions for the VMA within the mmap lock
critical section, avoiding the use of a potentally stale VMA
pointer
- vPMU fixes:
- Return the sum of the current perf event value and PMC snapshot
for reads from userspace
- Don't save the value of guest writes to PMCR_EL0.{C,P}, which
could otherwise lead to userspace erroneously resetting the vPMU
during VM save/restore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
riscv/kvm: Fix VM hang in case of timer delta being zero.
KVM: arm64: Check for kvm_vma_mte_allowed in the critical section
KVM: arm64: Disable interrupts while walking userspace PTs
KVM: arm64: Retry fault if vma_lookup() results become invalid
KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU
KVM: arm64: PMU: Fix GET_ONE_REG for vPMC regs to return the current value
For ACPI drivers that provide a ->notify() callback and set
ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be
invoked while either the ->add() or the ->remove() callback is running
without any synchronization at the bus type level which is counter to
the common-sense expectation that notification handling should only be
enabled when the driver is actually bound to the device. As a result,
if the driver is not careful enough, it's ->notify() callback may crash
when it is invoked too early or too late [1].
This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop
driver member of struct acpi_device") that made acpi_bus_notify() check
for the presence of the driver and its ->notify() callback directly
instead of using an extra driver pointer that was only set and cleared
by the bus type code, but it was present before that commit although
it was harder to reproduce then.
It can be addressed by using the observation that
acpi_device_install_notify_handler() can be modified to install the
handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is
set in the driver flags, in which case acpi_bus_notify() will not need
to invoke the driver's ->notify() callback any more and that callback
will only be invoked after acpi_device_install_notify_handler() has run
and before acpi_device_remove_notify_handler() runs, which implies the
correct ordering with respect to the other ACPI driver callbacks.
Modify the code accordingly and while at it, drop two redundant local
variables from acpi_bus_notify() and turn its description comment into
a proper kerneldoc one.
Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device")
Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1]
Reported-by: Pierre Asselin <pa@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Pierre Asselin <pa@panix.com>
Highlights:
- Intel tpmi/vsec fixes
- think-lmi fixes
- 2 other small fixes / hw-id additions
The following is an automated git shortlog grouped by driver:
platform/surface:
- aggregator: Add missing fwnode_handle_put()
platform/x86 (gigabyte-wmi):
- Add support for A320M-S2H V2
platform/x86/intel:
- tpmi: Revise the comment of intel_vsec_add_aux
- tpmi: Fix double free in tpmi_create_device()
- vsec: Fix a memory leak in intel_vsec_add_aux
think-lmi:
- Add possible_values for ThinkStation
- only display possible_values if available
- use correct possible_values delimiters
- add missing type attribute
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmQhfPAUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9x7PQf+NhIvs4KWPUiHMGz2w7xt2bls6agA
ZyQB50UDNDt4JBQG6ZYdMd0d1oFoov8E1869vMccHTPNDKrpju0j8zVULuCJlJ0R
5MmcKKgbq5l3pBPxuTXY9MIHX0zGd8vuG4tcRQIBLttHvj5T4Dbny3+ohGEf9b4o
HlwkUBTWjO0LK6NPa4IWC1lZbmsXncEQYy4CaxtQGUN754EdlGfuBhn3o1MKIgoD
B6HEBH3MSr81UhvYPWGvB6X7qk1vXUW0K+3B375+pLxVSPsjVDOHBQ2BovDC8Enc
KVXPl4vGd6ZpVtU8kEj7kiyhFGrkCXUxQ2IbkuqL9iuiy7AZzi1O4Cwygw==
=i/tZ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel tpmi/vsec fixes
- think-lmi fixes
- two other small fixes / hw-id additions
* tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/surface: aggregator: Add missing fwnode_handle_put()
platform/x86: think-lmi: Add possible_values for ThinkStation
platform/x86: think-lmi: only display possible_values if available
platform/x86: think-lmi: use correct possible_values delimiters
platform/x86: think-lmi: add missing type attribute
platform/x86 (gigabyte-wmi): Add support for A320M-S2H V2
platform/x86/intel: tpmi: Revise the comment of intel_vsec_add_aux
platform/x86/intel: tpmi: Fix double free in tpmi_create_device()
platform/x86/intel: vsec: Fix a memory leak in intel_vsec_add_aux
Return -EFAULT if put_user() for the PTRACE_GET_LAST_BREAK
request fails, instead of silently ignoring it.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Expolines depend on scripts/basic/fixdep. And build of expolines can now
race with the fixdep build:
make[1]: *** Deleting file 'arch/s390/lib/expoline/expoline.o'
/bin/sh: line 1: scripts/basic/fixdep: Permission denied
make[1]: *** [../scripts/Makefile.build:385: arch/s390/lib/expoline/expoline.o] Error 126
make: *** [../arch/s390/Makefile:166: expoline_prepare] Error 2
The dependence was removed in the below Fixes: commit. So reintroduce
the dependence on scripts.
Fixes: a0b0987a7811 ("s390/nospec: remove unneeded header includes")
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: stable@vger.kernel.org
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230316112809.7903-1-jirislaby@kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The device release callback function invoked to release the matrix device
uses the dev_get_drvdata(device *dev) function to retrieve the
pointer to the vfio_matrix_dev object in order to free its storage. The
problem is, this object is not stored as drvdata with the device; since the
kfree function will accept a NULL pointer, the memory for the
vfio_matrix_dev object is never freed.
Since the device being released is contained within the vfio_matrix_dev
object, the container_of macro will be used to retrieve its pointer.
Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver")
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20230320150447.34557-1-akrowiak@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add missing earlyclobber annotation to size, to, and tmp2 operands of the
__clear_user() inline assembly since they are modified or written to before
the last usage of all input operands. This can lead to incorrect register
allocation for the inline assembly.
Fixes: 6c2a9e6df604 ("[S390] Use alternative user-copy operations for new hardware.")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/all/20230321122514.1743889-3-mark.rutland@arm.com/
Cc: stable@vger.kernel.org
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Fix VM hang in case of timer delta being zero
-----BEGIN PGP SIGNATURE-----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=lDDD
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-fixes-6.3-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 6.3, take #1
- Fix VM hang in case of timer delta being zero
Fixes for a rather interesting set of bugs relating to the MMU:
- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
- Disable interrupts when walking user page tables to protect against
the page table being freed
- Read the MTE permissions for the VMA within the mmap lock critical
section, avoiding the use of a potentally stale VMA pointer
Additionally, some fixes targeting the vPMU:
- Return the sum of the current perf event value and PMC snapshot for
reads from userspace
- Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
otherwise lead to userspace erroneously resetting the vPMU during VM
save/restore
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZBPXKAAKCRCivnWIJHzd
Ftz7AP9+mxPPS2h9ly/wV+rCR6gg/ZqemXf+0rGJZWgkscUrbAD/XGnKhlAZZZeW
/9qoEtWnAguhz8vOg8oPbtJ2c2reDwk=
=RcGY
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #2
Fixes for a rather interesting set of bugs relating to the MMU:
- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
- Disable interrupts when walking user page tables to protect against
the page table being freed
- Read the MTE permissions for the VMA within the mmap lock critical
section, avoiding the use of a potentally stale VMA pointer
Additionally, some fixes targeting the vPMU:
- Return the sum of the current perf event value and PMC snapshot for
reads from userspace
- Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
otherwise lead to userspace erroneously resetting the vPMU during VM
save/restore
Syzkaller reported the following issue:
=====================================================
BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline]
BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600
aio_rw_done fs/aio.c:1520 [inline]
aio_write+0x899/0x950 fs/aio.c:1600
io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
__do_sys_io_submit fs/aio.c:2078 [inline]
__se_sys_io_submit+0x293/0x770 fs/aio.c:2048
__x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook mm/slab.h:766 [inline]
slab_alloc_node mm/slub.c:3452 [inline]
__kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
__do_kmalloc_node mm/slab_common.c:967 [inline]
__kmalloc+0x11d/0x3b0 mm/slab_common.c:981
kmalloc_array include/linux/slab.h:636 [inline]
bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930
bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
sock_write_iter+0x495/0x5e0 net/socket.c:1108
call_write_iter include/linux/fs.h:2189 [inline]
aio_write+0x63a/0x950 fs/aio.c:1600
io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
__do_sys_io_submit fs/aio.c:2078 [inline]
__se_sys_io_submit+0x293/0x770 fs/aio.c:2048
__x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
=====================================================
We can follow the call chain and find that 'bcm_tx_setup' function
calls 'memcpy_from_msg' to copy some content to the newly allocated
frame of 'op->frames'. After that the 'len' field of copied structure
being compared with some constant value (64 or 8). However, if
'memcpy_from_msg' returns an error, we will compare some uninitialized
memory. This triggers 'uninit-value' issue.
This patch will add 'memcpy_from_msg' possible errors processing to
avoid uninit-value issue.
Tested via syzkaller
Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Fixes: 6f3b911d5f29b ("can: bcm: add support for CAN FD frames")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the
slp_s0_residency attribute has been reporting the wrong value. Unlike other
platforms, ADL PCH does not have a counter for the time that the SLP_S0
signal was asserted. Instead, firmware uses the aggregate of the Low Power
Mode (LPM) substate counters as the S0ix value. Since the LPM counters run
at a different frequency, this lead to misreporting of the S0ix time.
Add a check for Alder Lake PCH and adjust the frequency accordingly when
display slp_s0_residency.
Fixes: bbab31101f44 ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230320212029.3154407-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If we fail to adjust the GuC run-control on opening the perf stream,
make sure we unwind the wakeref just taken.
v2: Retain old goto label names (Ashutosh)
v3: Drop bitfield boolean
Fixes: 01e742746785 ("drm/i915/guc: Support OA when Wa_16011777198 is enabled")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 2810ac6c753d17ee2572ffb57fe2382a786a080a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently i915_gem_object_is_framebuffer() doesn't treat the
BO containing the framebuffer's DPT as a framebuffer itself.
This means eg. that the shrinker can evict the DPT BO while
leaving the actual FB BO bound, when the DPT is allocated
from regular shmem.
That causes an immediate oops during hibernate as we
try to rewrite the PTEs inside the already evicted
DPT obj.
TODO: presumably this might also be the reason for the
DPT related display faults under heavy memory pressure,
but I'm still not sure how that would happen as the object
should be pinned by intel_dpt_pin() while in active use by
the display engine...
Cc: stable@vger.kernel.org
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 779cb5ba64ec7df80675a956c9022929514f517a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
i915_gem_object_create_lmem_from_data() lacks the flush of the data
written to lmem to ensure the object is marked as dirty and the writes
flushed to the backing store. Once created, we can immediately release
the obj->mm.mapping caching of the vmap.
Fixes: 7acbbc7cf485 ("drm/i915/guc: put all guc objects in lmem when available")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316165918.13074-1-nirmoy.das@intel.com
(cherry picked from commit e2ee10474ce766686e7a7496585cdfaf79e3a1bf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The commit renaming icl_tc_phy_is_in_safe_mode() to
icl_tc_phy_take_ownership() didn't flip the function's return value
accordingly, fix this up.
This didn't cause an actual problem besides state check errors, since
the function is only used during HW readout.
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: f53979d68a77 ("drm/i915/display/tc: Rename safe_mode functions ownership")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-4-imre.deak@intel.com
(cherry picked from commit f2c7959dda614d9b7c6a41510492de39d31705ec)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Keeping DC states enabled is incompatible with the _noarm()/_arm()
split we use for writing pipe/plane registers. When DC5 and PSR
are enabled, all pipe/plane registers effectively become self-arming
on account of DC5 exit arming the update, and PSR exit latching it.
What probably saves us most of the time is that (with PIPE_MISC[21]=0)
all pipe register writes themselves trigger PSR exit, and then
we don't re-enter PSR until the idle frame count has elapsed.
So it may be that the PSR exit happens already before we've
updated the state too much.
Also the PSR1 panel (at least on this KBL) seems to discard the first
frame we trasmit, presumably still scanning out from its internal
framebuffer at that point. So only the second frame we transmit is
actually visible. But I suppose that could also be panel specific
behaviour. I haven't checked out how other PSR panels behave, nor
did I bother to check what the eDP spec has to say about this.
And since this really is all about DC states, let's switch from
the MODESET domain to the DC_OFF domain. Functionally they are
100% identical. We should probably remove the MODESET domain...
And for good measure let's toss in an assert to the place where
we do the _noarm() register writes to make sure DC states are
in fact off.
v2: Just use intel_display_power_is_enabled() (Imre)
Cc: <stable@vger.kernel.org> #v5.17+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming")
Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com
(cherry picked from commit 41b4c7fe72b6105a4b49395eea9aa40cef94288d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unlike SKL/GLK the ICL CSC unit suffers from a new issue where
CSC_MODE arming is sticky. That is, once armed it remains armed
causing the CSC coeff/offset registers to become effectively
self-arming.
CSC coeff/offset registers writes no longer disarm the CSC,
but fortunately register read still do. So we can use that
to disarm the CSC unit once the registers for the current
frame have been latched. This avoid s the self-arming behaviour
from persisting into the next frame's .color_commit_noarm()
call.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 92736f1b452bbb8a66bdb5b1d263ad00e04dd3b8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We're going to need stuff after the color management
register latching has happened. Add a corresponding hook.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 3962ca4e080a525fc9eae87aa6b2286f1fae351d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
SKL/GLK CSC unit suffers from a nasty issue where a CSC
coeff/offset register read or write between DC5 exit and
PSR exit will undo the CSC arming performed by DMC, and
then during PSR exit the hardware will latch zeroes into
the active CSC registers. This causes any plane going
through the CSC to output all black.
We can sidestep the issue by making sure the PSR exit has
already actually happened before we touch the CSC coeff/offset
registers. Easiest way to guarantee that is to just move the
CSC programming back into the .color_commir_arm() as we force
a PSR exit (and crucially wait for it to actually happen)
prior to touching the arming registers.
When PSR (and thus also DC states) are disabled we don't
have anything to worry about, so we can keep using the
more optional _noarm() hook for writing the CSC registers.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283
Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 80a892a4c2428b65366721599fc5fe50eaed35fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We're going to want different behavior for skl/glk vs. icl
in .color_commit_noarm(), so split the hook into two. Arguably
we already had slightly different behaviour since
csc_enable/gamma_enable are never set on icl+, so the old
code was perhaps a bit confusing as well.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit f161eb01f50ab31f2084975b43bce54b7b671e17)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Expose intel_rps_read_actual_frequency_fw to read the actual freq without
taking forcewake for use by PMU. The code is refactored to use a common set
of functions across sysfs and PMU. Using common functions with sysfs in PMU
solves the issues of missing support for MTL and missing support for older
generations (prior to Gen6). It also future proofs the PMU where sometimes
code has been updated for sysfs and PMU has been missed.
v2: Remove runtime_pm_if_in_use from read_actual_frequency_fw (Tvrtko)
v3: (Tvrtko)
- Remove goto in __read_cagf
- Unexport intel_rps_get_cagf and intel_rps_read_punit_req
Fixes: 22009b6dad66 ("drm/i915/mtl: Modify CAGF functions for MTL")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8280
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316004800.2539753-1-ashutosh.dixit@intel.com
(cherry picked from commit 44df42e66139b5fac8db49ee354be279210f9816)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The blamed commit has introduced the following tests to
dwmac4_add_hw_vlan_rx_fltr(), called from stmmac_vlan_rx_add_vid():
if (hw->promisc) {
netdev_err(dev,
"Adding VLAN in promisc mode not supported\n");
return -EPERM;
}
"VLAN promiscuous" mode is keyed in this driver to IFF_PROMISC, and so,
vlan_vid_add() and vlan_vid_del() calls cannot take place in IFF_PROMISC
mode. I have the following 2 arguments that this restriction is.... hm,
how shall I put it nicely... unproductive :)
First, take the case of a Linux bridge. If the kernel is compiled with
CONFIG_BRIDGE_VLAN_FILTERING=y, then this bridge shall have a VLAN
database. The bridge shall try to call vlan_add_vid() on its bridge
ports for each VLAN in the VLAN table. It will do this irrespectively of
whether that port is *currently* VLAN-aware or not. So it will do this
even when the bridge was created with vlan_filtering 0.
But the Linux bridge, in VLAN-unaware mode, configures its ports in
promiscuous (IFF_PROMISC) mode, so that they accept packets with any
MAC DA (a switch must do this in order to forward those packets which
are not directly targeted to its MAC address).
As a result, the stmmac driver does not work as a bridge port, when the
kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y.
$ ip link add br0 type bridge && ip link set br0 up
$ ip link set eth0 master br0 && ip link set eth0 up
[ 2333.943296] br0: port 1(eth0) entered blocking state
[ 2333.943381] br0: port 1(eth0) entered disabled state
[ 2333.943782] device eth0 entered promiscuous mode
[ 2333.944080] 4033c000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 2333.976509] 4033c000.ethernet eth0: failed to initialize vlan filtering on this port
RTNETLINK answers: Operation not permitted
Secondly, take the case of stmmac as DSA master. Some switch tagging
protocols are based on 802.1Q VLANs (tag_sja1105.c), and as such,
tag_8021q.c uses vlan_vid_add() to work with VLAN-filtering DSA masters.
But also, when a DSA port becomes promiscuous (for example when it joins
a bridge), the DSA framework also makes the DSA master promiscuous.
Moreover, for every VLAN that a DSA switch sends to the CPU, DSA also
programs a VLAN filter on the DSA master, because if the the DSA switch
uses a tail tag, then the hardware frame parser of the DSA master will
see VLAN as VLAN, and might filter them out, for being unknown.
Due to the above 2 reasons, my belief is that the stmmac driver does not
get to choose to not accept vlan_vid_add() calls while IFF_PROMISC is
enabled, because the 2 are completely independent and there are code
paths in the network stack which directly lead to this situation
occurring, without the user's direct input.
In fact, my belief is that "VLAN promiscuous" mode should have never
been keyed on IFF_PROMISC in the first place, but rather, on the
NETIF_F_HW_VLAN_CTAG_FILTER feature flag which can be toggled by the
user through ethtool -k, when present in netdev->hw_features.
In the stmmac driver, NETIF_F_HW_VLAN_CTAG_FILTER is only present in
"features", making this feature "on [fixed]".
I have this belief because I am unaware of any definition of promiscuity
which implies having an effect on anything other than MAC DA (therefore
not VLAN). However, I seem to be rather alone in having this opinion,
looking back at the disagreements from this discussion:
https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/
In any case, to remove the vlan_vid_add() dependency on !IFF_PROMISC,
one would need to remove the check and see what fails. I guess the test
was there because of the way in which dwmac4_vlan_promisc_enable() is
implemented.
For context, the dwmac4 supports Perfect Filtering for a limited number
of VLANs - dwmac4_get_num_vlan(), priv->hw->num_vlan, with a fallback on
Hash Filtering - priv->dma_cap.vlhash - see stmmac_vlan_update(), also
visible in cat /sys/kernel/debug/stmmaceth/eth0/dma_cap | grep 'VLAN
Hash Filtering'.
The perfect filtering is based on MAC_VLAN_Tag_Filter/MAC_VLAN_Tag_Data
registers, accessed in the driver through dwmac4_write_vlan_filter().
The hash filtering is based on the MAC_VLAN_Hash_Table register, named
GMAC_VLAN_HASH_TABLE in the driver and accessed by dwmac4_update_vlan_hash().
The control bit for enabling hash filtering is GMAC_VLAN_VTHM
(MAC_VLAN_Tag_Ctrl bit VTHM: VLAN Tag Hash Table Match Enable).
Now, the description of dwmac4_vlan_promisc_enable() is that it iterates
through the driver's cache of perfect filter entries (hw->vlan_filter[i],
added by dwmac4_add_hw_vlan_rx_fltr()), and evicts them from hardware by
unsetting their GMAC_VLAN_TAG_DATA_VEN (MAC_VLAN_Tag_Data bit VEN - VLAN
Tag Enable) bit. Then it unsets the GMAC_VLAN_VTHM bit, which disables
hash matching.
This leaves the MAC, according to table "VLAN Match Status" from the
documentation, to always enter these data paths:
VID |VLAN Perfect Filter |VTHM Bit |VLAN Hash Filter |Final VLAN Match
|Match Result | |Match Result |Status
-------|--------------------|---------|-----------------|----------------
VID!=0 |Fail |0 |don't care |Pass
So, dwmac4_vlan_promisc_enable() does its job, but by unsetting
GMAC_VLAN_VTHM, it conflicts with the other code path which controls
this bit: dwmac4_update_vlan_hash(), called through stmmac_update_vlan_hash()
from stmmac_vlan_rx_add_vid() and from stmmac_vlan_rx_kill_vid().
This is, I guess, why dwmac4_add_hw_vlan_rx_fltr() is not allowed to run
after dwmac4_vlan_promisc_enable() has unset GMAC_VLAN_VTHM: because if
it did, then dwmac4_update_vlan_hash() would set GMAC_VLAN_VTHM again,
breaking the "VLAN promiscuity".
It turns out that dwmac4_vlan_promisc_enable() is way too complicated
for what needs to be done. The MAC_Packet_Filter register also has the
VTFE bit (VLAN Tag Filter Enable), which simply controls whether VLAN
tagged packets which don't match the filtering tables (either perfect or
hash) are dropped or not. At the moment, this driver unconditionally
sets GMAC_PACKET_FILTER_VTFE if NETIF_F_HW_VLAN_CTAG_FILTER was detected
through the priv->dma_cap.vlhash capability bits of the device, in
stmmac_dvr_probe().
I would suggest deleting the unnecessarily complex logic from
dwmac4_vlan_promisc_enable(), and simply unsetting GMAC_PACKET_FILTER_VTFE
when becoming IFF_PROMISC, which has the same effect of allowing packets
with any VLAN tags, but has the additional benefit of being able to run
concurrently with stmmac_vlan_rx_add_vid() and stmmac_vlan_rx_kill_vid().
As much as I believe that the VTFE bit should have been exclusively
controlled by NETIF_F_HW_VLAN_CTAG_FILTER through ethtool, and not by
IFF_PROMISC, changing that is not a punctual fix to the problem, and it
would probably break the VFFQ feature added by the later commit
e0f9956a3862 ("net: stmmac: Add option for VLAN filter fail queue
enable"). From the commit description, VFFQ needs IFF_PROMISC=on and
VTFE=off in order to work (and this change respects that). But if VTFE
was changed to be controlled through ethtool -k, then a user-visible
change would have been introduced in Intel's scripts (a need to run
"ethtool -k eth0 rx-vlan-filter off" which did not exist before).
The patch was tested with this set of commands:
ip link set eth0 up
ip link add link eth0 name eth0.100 type vlan id 100
ip addr add 192.168.100.2/24 dev eth0.100 && ip link set eth0.100 up
ip link set eth0 promisc on
ip link add link eth0 name eth0.101 type vlan id 101
ip addr add 192.168.101.2/24 dev eth0.101 && ip link set eth0.101 up
ip link set eth0 promisc off
ping -c 5 192.168.100.1
ping -c 5 192.168.101.1
ip link set eth0 promisc on
ping -c 5 192.168.100.1
ping -c 5 192.168.101.1
ip link del eth0.100
ip link del eth0.101
# Wait for VLAN-tagged pings from the other end...
# Check with "tcpdump -i eth0 -e -n -p" and we should see them
ip link set eth0 promisc off
# Wait for VLAN-tagged pings from the other end...
# Check with "tcpdump -i eth0 -e -n -p" and we shouldn't see them
# anymore, but remove the "-p" argument from tcpdump and they're there.
Fixes: c89f44ff10fd ("net: stmmac: Add support for VLAN promiscuous mode")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit addresses a deadlock situation that can occur in certain
scenarios, such as when running data TP/ETP transfer and subscribing to
the error queue while receiving a net down event. The deadlock involves
locks in the following order:
3
j1939_session_list_lock -> active_session_list_lock
j1939_session_activate
...
j1939_sk_queue_activate_next -> sk_session_queue_lock
...
j1939_xtp_rx_eoma_one
2
j1939_sk_queue_drop_all -> sk_session_queue_lock
...
j1939_sk_netdev_event_netdown -> j1939_socks_lock
j1939_netdev_notify
1
j1939_sk_errqueue -> j1939_socks_lock
__j1939_session_cancel -> active_session_list_lock
j1939_tp_rxtimer
CPU0 CPU1
---- ----
lock(&priv->active_session_list_lock);
lock(&jsk->sk_session_queue_lock);
lock(&priv->active_session_list_lock);
lock(&priv->j1939_socks_lock);
The solution implemented in this commit is to move the
j1939_sk_errqueue() call out of the active_session_list_lock context,
thus preventing the deadlock situation.
Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com
Fixes: 5b9272e93f2e ("can: j1939: extend UAPI to notify about RX status")
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing
B53_PORT_MII_PAGE registers which hangs the device.
This access should be done through the MDIO Mux bus controller.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The KSZ9131RNX incorrectly shows EEE capabilities in its registers.
Although the "EEE control and capability 1" (Register 3.20) is set to 0,
indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is
set to 0x6, advertising EEE support for 1000BaseT/Full and
100BaseT/Full.
This inconsistency causes PHYlib to assume there is no EEE support,
preventing control over EEE advertisement, which is enabled by default.
This patch resolves the issue by utilizing the ksz9477_get_features()
function to correctly set the EEE capabilities for the KSZ9131RNX. This
adjustment allows proper control over EEE advertisement and ensures
accurate representation of the device's capabilities.
Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()")
Reported-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
pkt_list_lock was used before commit 71dc9ec9ac7d ("virtio/vsock:
replace virtio_vsock_pkt with sk_buff") to protect the packet queue.
After that commit we switched to sk_buff and we are using
sk_buff_head.lock in almost every place to protect the packet queue
except in vsock_loopback_work() when we call skb_queue_splice_init().
As reported by syzbot, this caused unlocked concurrent access to the
packet queue between vsock_loopback_work() and
vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock.
With the introduction of sk_buff_head, pkt_list_lock is redundant and
can cause confusion, so let's remove it and use sk_buff_head.lock
everywhere to protect the packet queue access.
Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Cc: bobby.eshleman@bytedance.com
Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
Constify a few sfp/phy fwnodes
This series constifies a bunch of fwnode_handle pointers that are only
used to refer to but not modify the contents of the fwnode structures.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
fwnode_get_phy_node() does not motify the fwnode structure, so make
the argument const,
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Constify sfp-bus internal fwnode uses, since we do not modify the
fwnode structures.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sfp_bus_find_fwnode() does not write to the fwnode, so let's make it
const.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The failover txq is inited as 16 queues.
when a packet is transmitted from the failover device firstly,
the failover device will select the queue which is returned from
the primary device if the primary device is UP and running.
If the primary device txq is bigger than the default 16,
it can lead to the following warning:
eth0 selects TX queue 18, but real number of TX queues is 16
The warning backtrace is:
[ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1
[ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014
[ 32.147730] Call Trace:
[ 32.147971] <TASK>
[ 32.148183] dump_stack_lvl+0x48/0x70
[ 32.148514] dump_stack+0x10/0x20
[ 32.148820] netdev_core_pick_tx+0xb1/0xe0
[ 32.149180] __dev_queue_xmit+0x529/0xcf0
[ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0
[ 32.149967] ip_finish_output2+0x278/0x560
[ 32.150327] __ip_finish_output+0x1fe/0x2f0
[ 32.150690] ip_finish_output+0x2a/0xd0
[ 32.151032] ip_output+0x7a/0x110
[ 32.151337] ? __pfx_ip_finish_output+0x10/0x10
[ 32.151733] ip_local_out+0x5e/0x70
[ 32.152054] ip_send_skb+0x19/0x50
[ 32.152366] udp_send_skb.isra.0+0x163/0x3a0
[ 32.152736] udp_sendmsg+0xba8/0xec0
[ 32.153060] ? __folio_memcg_unlock+0x25/0x60
[ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 32.153854] ? sock_has_perm+0x85/0xa0
[ 32.154190] inet_sendmsg+0x6d/0x80
[ 32.154508] ? inet_sendmsg+0x6d/0x80
[ 32.154838] sock_sendmsg+0x62/0x70
[ 32.155152] ____sys_sendmsg+0x134/0x290
[ 32.155499] ___sys_sendmsg+0x81/0xc0
[ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0
[ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0
[ 32.156649] ? get_random_u16+0x69/0xf0
[ 32.156989] ? __fget_light+0xcf/0x110
[ 32.157326] __sys_sendmmsg+0xc4/0x210
[ 32.157657] ? __sys_connect+0xb7/0xe0
[ 32.157995] ? __audit_syscall_entry+0xce/0x140
[ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0
[ 32.158820] __x64_sys_sendmmsg+0x24/0x30
[ 32.159171] do_syscall_64+0x38/0x90
[ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix that by reducing txq number as the non-existent primary-dev does.
Fixes: cfc80d9a1163 ("net: Introduce net_failover driver")
Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
devm_clk_get() can return -EPROBE_DEFER. So it is better to return the
error code from devm_clk_get(), instead of a hard coded -ENOENT.
This gives more opportunities to successfully probe the driver.
Fixes: 8959e5324485 ("regulator: fixed: add possibility to enable by clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/18459fae3d017a66313699c7c8456b28158b2dd0.1679819354.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Here are a small set of USB and Thunderbolt driver fixes for reported
problems and a documentation update, for 6.3-rc4.
Included in here are:
- documentation update for uvc gadget driver
- small thunderbolt driver fixes
- cdns3 driver fixes
- dwc3 driver fixes
- dwc2 driver fixes
- chipidea driver fixes
- typec driver fixes
- onboard_usb_hub device id updates
- quirk updates
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZCBKPg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylpVwCgyqeDRhlJBlVnqhB1yAT+JTRW5oEAoL1HrTuf
6RJ3n8NbIXKRSZ49/b43
=4u7n
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are a small set of USB and Thunderbolt driver fixes for reported
problems and a documentation update, for 6.3-rc4.
Included in here are:
- documentation update for uvc gadget driver
- small thunderbolt driver fixes
- cdns3 driver fixes
- dwc3 driver fixes
- dwc2 driver fixes
- chipidea driver fixes
- typec driver fixes
- onboard_usb_hub device id updates
- quirk updates
All of these have been in linux-next with no reported problems"
* tag 'usb-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
usb: dwc2: fix a race, don't power off/on phy for dual-role mode
usb: dwc2: fix a devres leak in hw_enable upon suspend resume
usb: chipidea: core: fix possible concurrent when switch role
usb: chipdea: core: fix return -EINVAL if request role is the same with current role
thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit
thunderbolt: Disable interrupt auto clear for rings
thunderbolt: Use const qualifier for `ring_interrupt_index`
usb: gadget: Use correct endianness of the wLength field for WebUSB
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2
usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver
usb: cdns3: Fix issue with using incorrect PCI device function
usb: cdnsp: Fixes issue with redundant Status Stage
MAINTAINERS: make me a reviewer of USB/IP
thunderbolt: Use scale field when allocating USB3 bandwidth
thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers
thunderbolt: Call tb_check_quirks() after initializing adapters
thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access
thunderbolt: Fix memory leak in margining
usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
docs: usb: Add documentation for the UVC Gadget
...
-----BEGIN PGP SIGNATURE-----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=Z8oJ
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Fix a corner case where vruntime of a task is not being sanitized
* tag 'sched_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Sanitize vruntime of entity being migrated
former doesn't get ignored
- A noinstr warning fix
-----BEGIN PGP SIGNATURE-----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=c5tH
-----END PGP SIGNATURE-----
Merge tag 'core_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Borislav Petkov:
- Do the delayed RCU wakeup for kthreads in the proper order so that
former doesn't get ignored
- A noinstr warning fix
* tag 'core_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up
entry: Fix noinstr warning in __enter_from_user_mode()
- Prevent a false-positive warning when retrieving the (invalid) address of
dynamic FPU features in their init state which are not saved in
init_fpstate at all
- Randomize per-CPU entry areas only when KASLR is enabled
-----BEGIN PGP SIGNATURE-----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=eZTj
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a AMX ptrace self test
- Prevent a false-positive warning when retrieving the (invalid)
address of dynamic FPU features in their init state which are not
saved in init_fpstate at all
- Randomize per-CPU entry areas only when KASLR is enabled
* tag 'x86_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86/amx: Add a ptrace test
x86/fpu/xstate: Prevent false-positive warning in __copy_xstate_uabi_buf()
x86/mm: Do not shuffle CPU entry areas without KASLR
-----BEGIN PGP SIGNATURE-----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=oxu5
-----END PGP SIGNATURE-----
Merge tag 'smb3-client-fixes-6.3-rc3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Twelve cifs/smb3 client fixes (most also for stable)
- forced umount fix
- fix for two perf regressions
- reconnect fixes
- small debugging improvements
- multichannel fixes"
* tag 'smb3-client-fixes-6.3-rc3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix unusable share after force unmount failure
cifs: fix dentry lookups in directory handle cache
smb3: lower default deferred close timeout to address perf regression
cifs: fix missing unload_nls() in smb2_reconnect()
cifs: avoid race conditions with parallel reconnects
cifs: append path to open_enter trace event
cifs: print session id while listing open files
cifs: dump pending mids for all channels in DebugData
cifs: empty interface list when server doesn't support query interfaces
cifs: do not poll server interfaces too regularly
cifs: lock chan_lock outside match_session
cifs: check only tcon status on tcon related functions
- Fix a crash when using NFS with krb5p
-----BEGIN PGP SIGNATURE-----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=FHAt
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a crash when using NFS with krb5p
* tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a crash in gss_krb5_checksum()
* Fix the new allocator tracepoints because git am mismerged the
changes such that the trace_XXX got rebased to be in function YYY
instead of XXX.
* Ensure that the perag AGFL_RESET state is consistent with whatever
we've just read off the disk.
* Fix a bug where we used the wrong iext cursor during a write begin.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZB8vTAAKCRBKO3ySh0YR
ploFAQCo1YS/k69qhLoAYGsiKPX80HaM0ZOROgNyl+A9JTkIqgD/fY+u4wLhXriz
9L5Zo5Me28nr3DCiFa5oC/0MHDY4NAQ=
=mnH3
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.3-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull yet more xfs bug fixes from Darrick Wong:
"The first bugfix addresses a longstanding problem where we use the
wrong file mapping cursors when trying to compute the speculative
preallocation quantity. This has been causing sporadic crashes when
alwayscow mode is engaged.
The other two fixes correct minor problems in more recent changes.
- Fix the new allocator tracepoints because git am mismerged the
changes such that the trace_XXX got rebased to be in function YYY
instead of XXX
- Ensure that the perag AGFL_RESET state is consistent with whatever
we've just read off the disk
- Fix a bug where we used the wrong iext cursor during a write begin"
* tag 'xfs-6.3-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix mismerged tracepoints
xfs: clear incore AGFL_RESET state if it's not needed
xfs: pass the correct cursor to xfs_iomap_prealloc_size
* Fix a race in the percpu counters summation code where the summation
failed to add in the values for any CPUs that were dying but not yet
dead. This fixes some minor discrepancies and incorrect assertions
when running generic/650.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZBdAbgAKCRBKO3ySh0YR
pkltAQCs4QO5LjYReqjUxd4cSsLtNnNon09qswRsl2GuRyI36AEAxI9QMq4Q6D9V
ZasNbiTCkV3KPKfmp6gf1mQNLk1lGQ0=
=Bz3q
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs percpu counter fixes from Darrick Wong:
"We discovered a filesystem summary counter corruption problem that was
traced to cpu hot-remove racing with the call to percpu_counter_sum
that sets the free block count in the superblock when writing it to
disk. The root cause is that percpu_counter_sum doesn't cull from
dying cpus and hence misses those counter values if the cpu shutdown
hooks have not yet run to merge the values.
I'm hoping this is a fairly painless fix to the problem, since the
dying cpu mask should generally be empty. It's been in for-next for a
week without any complaints from the bots.
- Fix a race in the percpu counters summation code where the
summation failed to add in the values for any CPUs that were dying
but not yet dead. This fixes some minor discrepancies and incorrect
assertions when running generic/650"
* tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
pcpcntr: remove percpu_counter_sum_all()
fork: remove use of percpu_counter_sum_all
pcpcntrs: fix dying cpu summation race
cpumask: introduce for_each_cpu_or
* Add a few debugging assertions so that people (me) trying to port
code to the new allocator functions don't mess up the caller
requirements.
* Relax some overly cautious lock ordering enforcement in the new
allocator code, which means that file allocations will locklessly
scan for the best space they can get before backing off to the
traditional lock-and-really-get-it behavior.
* Add tracepoints to make it easier to trace the xfs allocator
behavior.
* Actually test the dir/xattr hash algorithm to make sure it produces
consistent results across all the platforms XFS supports.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZBc//AAKCRBKO3ySh0YR
pjOkAQDR7fH+5ZhYg2lnvVAkWkoVrK34zTcZp/k+hzS7p+C0tgD+Lzw6NhAyYFiY
QcOOVNHg5LheZ7IFgEqLM6ooVdtYigA=
=sLsG
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.3-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This batch started with some debugging enhancements to the new
allocator refactoring that we put in 6.3-rc1 to assist developers in
rebasing their dev branches.
As for more serious code changes -- there's a bug fix to make the
lockless allocator scan the whole filesystem before resorting to the
locking allocator. We're also adding a selftest for the venerable
directory/xattr hash function to make sure that it produces consistent
results so that we can address any fallout as soon as possible.
- Add a few debugging assertions so that people (me) trying to port
code to the new allocator functions don't mess up the caller
requirements
- Relax some overly cautious lock ordering enforcement in the new
allocator code, which means that file allocations will locklessly
scan for the best space they can get before backing off to the
traditional lock-and-really-get-it behavior
- Add tracepoints to make it easier to trace the xfs allocator
behavior
- Actually test the dir/xattr hash algorithm to make sure it produces
consistent results across all the platforms XFS supports"
* tag 'xfs-6.3-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: test dir/attr hash when loading module
xfs: add tracepoints for each of the externally visible allocators
xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags
xfs: try to idiot-proof the allocators
- it87: Fix voltage scaling for chips with 10.9mV ADCs
- xgene: Fix ioremap and memremap leak
- peci/cputemp: Fix miscalculated DTS temperature for SKX
- hwmon core: fix potential sensor registration failure with thermal subsystem
if of_node is missing
-----BEGIN PGP SIGNATURE-----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=ljbs
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- it87: Fix voltage scaling for chips with 10.9mV ADCs
- xgene: Fix ioremap and memremap leak
- peci/cputemp: Fix miscalculated DTS temperature for SKX
- hwmon core: fix potential sensor registration failure with thermal
subsystem if of_node is missing
* tag 'hwmon-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCs
hwmon: (xgene) Fix ioremap and memremap leak
hwmon: fix potential sensor registration fail if of_node is missing
hwmon: (peci/cputemp) Fix miscalculated DTS for SKX
Filipe Manana
Anand Jain
Alyssa Ross
Linus Torvalds
Rafael J. Wysocki
Heiko Carstens
Jiri Slaby (SUSE)
Tony Krowiak
Paolo Bonzini
Thomas Weißschuh
Ivan Orlov
Rajvi Jingar
Chris Wilson
Ville Syrjälä
Imre Deak
Ashutosh Dixit
Vladimir Oltean
Oleksij Rempel
Álvaro Fernández Rojas
Stefano Garzarella
David S. Miller
Russell King (Oracle)
Faicker Mo
Christophe JAILLET