IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Only two places:
- suspend/resume
- Some really strange mode validation tool with too much funny-lucking
hand-rolled conversion code.
- The recently-added lastclose fbdev restore code.
Better safe than sorry, so convert both places to keep the locking
semantics as much as possible.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Two exceptions:
- debugfs files only read information which is not related to crtc, so
can stay on the modeset_config lock.
- Same holds for the edp vdd work in intel_dp.c. Add a corresponding
WARN_ON and a comment next to the intel_dp struct fields for
documentation.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is the first step towards introducing the new modeset locking
scheme. The plan is to put helper functions into place at all the
right places step-by-step, so that the final patch to switch on the
new locking scheme doesn't need to touch every single driver.
This helper here will serve as the shotgun solutions for all places
where a more fine-grained locking isn't (yet) implemented.
v2: Fixup kerneldoc for unlock_all.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With refcounting we need to adjust framebuffer refcounts at each
callsite - much easier to do if they all call the same little helper
function.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some drivers don't have real ->create_handle callbacks.
- cirrus/ast/mga200: Returns either 0 or -EINVAL.
- udl: Didn't even bother with a callback, leading to a nice
userspace-triggerable OOPS.
- vmwgfx: This driver bothered with an implementation to return 0 as
the handle (which is the canonical no-obj gem handle).
All have in common that ->create_handle doesn't really make too much
sense for them - that ioctl is used only for seamless fb takeover in
the radeon/nouveau/i915 ddx drivers. So allow drivers to not implement
this and return a consistent -ENODEV.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... by moving the bo_pin/bo_unpin manipulation of the pin_refcount
under the protection of the ttm reservation lock. pin/unpin seems
to get called from all over the place, so atm this is completely racy.
After this patch there are only a few places in cleanup functions
left which access ->pin_refcount without locking. But I'm hoping that
those are safe and some other code invariant guarantees that this
won't blow up.
In any case, I only need to fix up pin/unpin to make ->pageflip work
safely, so let's keep it at that.
Add a comment to the header to explain the new locking rule.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With per-crtc locks modeset operations can run in parallel, and the
cursor code uses the device-global evo master channel for hw frobbing.
But the pageflip code can also sync with the master under some
circumstances. Hence just wrap things up in a mutex to ensure that
pushbuf access doesn't intermingle.
The approach here is a bit overkill since the per-crtc channels used
to schedule the pageflips could probably be used without this pushbuf
locking, but I'm not familiar enough with the nouveau codebase to be
sure of that.
v2: Add missing mutex_init to avoid angering lockdep.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Doing this within the fb->destroy callback leads to a locking
nightmare. And all other drm drivers that restore the fbcon do
it in lastclose, too.
With this adjustments all fb->destroy callbacks optionally drop
references to any gem objects used as backing storage, call
drm_framebuffer_cleanup and then kfree the struct. Which nicely
simplifies the locking for framebuffer unreferencing and freeing,
since this doesn't require that we hold the mode_config lock. A
slight exception is the vmwgfx surface backed framebuffer, it also
calls drm_master_put and removes the object from a device-private
framebuffer list. Both seem to have solid locking in place already.
Conclusion is that now it is no longer required to hold the
mode_config lock while freeing a framebuffer.
v2: Drop the corresponding mutex_lock WARN check from
drm_framebuffer_unreference.
v3: Use just the mode_config lock not modeset_lock_all, due to patch
reordering.
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
vmwgfx has an oddity, when failing to reference the surface it'll
return 0, since that's what the successfull drm_framebuffer_init will
leave behind in ret. Fix this up by returning -EINVAL.
Split out from all the other driver updates due to the above tiny
semantic change. Shouldn't matter though since the reference grabbing
seemingly can't fail.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With more fine-grained locking we can no longer rely on the big
mode_config lock to prevent concurrent access to mode resources
like framebuffers. Instead a framebuffer becomes accessible to
other threads as soon as it is added to the relevant lookup
structures. Hence it needs to be fully set up by the time drivers
call drm_framebuffer_init.
This patch here is the drivers part of that reorg. Nothing really fancy
going on safe for three special cases.
- exynos needs to be careful to properly unref all handles.
- nouveau gets a resource leak fixed for free: one of the error
cases didn't cleanup the framebuffer, which is now moot since
the framebuffer is only registered once it is fully set up.
- vmwgfx requires a slight reordering of operations, I'm hoping I didn't
break anything (but it's refcount management only, so should be safe).
v2: Split out exynos, since it's a bit more hairy than expected.
v3: Drop bogus cirrus hunk noticed by Richard Wilbur.
v4: Split out vmwgfx since there's a small change in return values.
Reviewed-by: Rob Clark <rob@ti.com> (core + omapdrm)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And do a quick pass to adjust them to the last few (years?) of changes
...
This time actually compile-tested ;-)
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- config_cleanup was confused: It claimed that callers need to hold
the modeset lock, but the connector|encoder_cleanup helpers grabbed
that themselves (note that crtc_cleanup did _not_ grab the modeset
lock). Which resulted in all drivers _not_ hodling the lock. Since
this is for single-threaded cleanup code, drop the requirement from
docs and also drop the lock_grabbing from all _cleanup functions.
- Kill the LOCKING section in the doctype, since clearly we're not
good enough to keep them up-to-date. And misleading locking
documentation is worse than useless (see e.g. the comment in the
vmgfx driver about the cleanup mess). And since for most functions
the very first line either grabs the lock or has a WARN_ON(!locked)
the documentation doesn't really add anything.
- Instead put in some effort into explaining the only two special
cases a bit better: config_init and config_cleanup are both called
from single-threaded setup/teardown code, so don't do any locking.
It's the driver's job though to enforce this.
- Where lacking, add a WARN_ON(!is_locked). Not many places though,
since locking around fbdev setup/teardown is through-roughly screwed
up, and so will break almost every single WARN annotation I've tried
to add.
- Add a drm_modeset_is_locked helper - the Grate Modset Locking Rework
will use the compiler to assist in the big reorg by renaming the
mode lock, so start encapsulating things. Unfortunately this ended
up in the "wrong" header file since it needs the definition of
struct drm_device.
v2: Drop most WARNS again - we hit them all over the place, mostly in
the setup and teardown sequences. And trying to fix it up leads to
nice deadlocks, since the locking in the setup code is really
inconsistent.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we seem to have brought order to the GTT barriers, the last one
to review is the terminal barrier before we unbind the buffer from the
GTT. This needs to only be performed if the buffer still resides in the
GTT domain, and so we can skip some needless barriers otherwise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With a fence, we only need to insert a memory barrier around the actual
fence alteration for CPU accesses through the GTT. Performing the
barrier in flush-fence was inserting unnecessary and expensive barriers
for never fenced objects.
Note removing the barriers from flush-fence, which was effectively a
barrier before every direct access through the GTT, revealed that we
where missing a barrier before the first access through the GTT. Lack of
that barrier was sufficient to cause GPU hangs.
v2: Add a couple more comments to explain the new barriers
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have two important transitions of the wedged state in the current
code:
- 0 -> 1: This means a hang has been detected, and signals to everyone
that they please get of any locks, so that the reset work item can
do its job.
- 1 -> 0: The reset handler has completed.
Now the last transition mixes up two states: "Reset completed and
successful" and "Reset failed". To distinguish these two we do some
tricks with the reset completion, but I simply could not convince
myself that this doesn't race under odd circumstances.
Hence split this up, and add a new terminal state indicating that the
hw is gone for good.
Also add explicit #defines for both states, update comments.
v2: Split out the reset handling bugfix for the throttle ioctl.
v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase
error which prevented this patch from actually compiling.
v4: To unify the wedged state with the reset counter, keep the
reset-in-progress state just as a flag. The terminally-wedged state is
now denoted with a big number.
v5: Add a comment to the reset_counter special values explaining that
WEDGED & RESET_IN_PROGRESS needs to be true for the code to be
correct.
v6: Fixup logic errors introduced with the wedged+reset_counter
unification. Since WEDGED implies reset-in-progress (in a way we're
terminally stuck in the dead-but-reset-not-completed state), we need
ensure that we check for this everywhere. The specific bug was in
wait_for_error, which would simply have timed out.
v7: Extract an inline i915_reset_in_progress helper to make the code
more readable. Also annote the reset-in-progress case with an
unlikely, to help the compiler optimize the fastpath. Do the same for
the terminally wedged case with i915_terminally_wedged.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
While auditing the code I've noticed one place (the throttle ioctl)
which does not yet wait for the reset handler to complete and doesn't
properly decode the wedge state into -EAGAIN/-EIO. Fix this up by
calling the right helpers. This might explain the oddball "my
compositor just died in a successfull gpu reset" reports. Or maybe not, since
current mesa doesn't use this ioctl to throttle command submission.
The throttle ioctl doesn't take the struct_mutex, so to avoid busy-looping
with -EAGAIN while a reset is in process, check for errors first and wait
for the handler to complete if a reset is pending by calling
i915_gem_wait_for_error.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And to make Ben Widawsky happier, use the gpu_error instead of
the entire device as the argument in some functions.
Drop the outdated comment on ->wedged for now, a follow-up patch will
change the semantics and add a proper comment again.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This has been sprinkled all over the place in dev_priv. I think
it'd be good to also move all the code into a separate file like
i915_gem_error.c, but that's for another patch.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tha one is really big, since it contains tons of comments explaining
how things work. Which is nice ;-)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The reasoning behind our code taking two paths depending upon whether or
not we may have been configured for IOMMU isn't clear to me. It should
always be safe to use the pci mapping functions as they are designed to
abstract the decision we were handling in i915.
Aside from simpler code, removing another member for the intel_gtt
struct is a nice motivation.
I ran this by Chris, and he wasn't concerned about the extra kzalloc,
and memory references vs. page_to_phys calculation in the case without
IOMMU.
v2: Update commit message
v3: Remove needs_dmar addition from Zhenyu upstream
This reverts (and then other stuff)
commit 20652097dadd9a7fb4d652f25466299974bc78f9
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date: Thu Dec 13 23:47:47 2012 +0800
drm/i915: Fix missed needs_dmar setting
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Squash in follow-up fix to remove the bogus hunk which
deleted the dma_mask configuration for gen6+.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already had a mapping in both (minus the phys_addr in AGP).
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And, move it to where the rest of the logic is.
There is some slight functionality changes. There was extra paranoid
checks in AGP code making sure we never do idle maps on gen2 parts. That
was not duplicated as the simple PCI id check should do the right thing.
v2: use IS_GEN5 && IS_MOBILE check instead. For now, this is the same as
IS_IRONLAKE_M but is more future proof. The workaround docs hint that
more than one platform may be effected, but we've never seen such a
platform in the wild. (Rodrigo, Daniel)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v1)
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The AVI infoframe is able to inform the display whether the source is
sending full or limited range RGB data.
As per CEA-861 [1] we must first check whether the display reports the
quantization range as selectable, and if so we can set the approriate
bits in the AVI inforframe.
[1] CEA-861-E - 6.4 Format of Version 2 AVI InfoFrame
v2: Give the Q bits better names, add spec chapter information
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_rgb_quant_range_selectable() will report whether the monitor
claims to support for RGB quantization range selection.
The information can be found in the CEA Video capability block.
v2: s/quantzation/quantization/ in the comment
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a new "Automatic" mode to the "Broadcast RGB" range property.
When selected the driver automagically selects between full range and
limited range output.
Based on CEA-861 [1] guidelines, limited range output is selected if the
mode is a CEA mode, except 640x480. Otherwise full range output is used.
Additionally DVI monitors should most likely default to full range
always.
As per DP1.2a [2] DisplayPort should always use full range for 18bpp, and
otherwise will follow CEA-861 rules.
NOTE: The default value for the property will now be "Automatic"
so some people may be affected in case they're relying on the
current full range default.
[1] CEA-861-E - 5.1 Default Encoding Parameters
[2] VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
v2: Use has_hdmi_sink to check if a HDMI monitor is present
v3: Add information about relevant spec chapters
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The RGB color range select bit on the DP/SDVO/HDMI registers
disappeared when PCH was introduced, and instead a new PIPECONF bit
was added that performs the same function.
Add a new INTEL_MODE_LIMITED_COLOR_RANGE private mode flag, and set
it in the encoder mode_fixup if limited color range is requested.
Set the the PIPECONF bit 13 based on the flag.
Experimentation showed that simply toggling the bit while the pipe is
active doesn't work. We need to restart the pipe, which luckily already
happens.
The DP/SDVO/HDMI bit 8 is marked MBZ in the docs, so avoid setting it,
although it doesn't seem to do any harm in practice.
TODO:
- the PIPECONF bit too seems to have disappeared from HSW. Need a
volunteer to test if it's just a documentation issue or if it's really
gone. If the bit is gone and no easy replacement is found, then I suppose
we may need to use the pipe CSC unit to perform the range compression.
v2: Use mode private_flags instead of intel_encoder virtual functions
v3: Moved the intel_dp color_range handling after bpc check to help
later patches
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46800
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mappable_end, ie. size is almost always what you want as opposed to the
number of entries. Since we already have that information, we can scrap
the number of entries and only calculate it when needed.
If gtt_start is !0, this will have slightly different behavior. This
difference can only occur in DRI1, and exists when we try to kick out
the firmware fb. The new code seems like a bugfix to me.
The other case where we've changed the behavior is during init we check
the mappable region against our current known upper and lower limits
(64MB, and 512MB). This now matches the comment, and makes things more
convenient after removing gtt_mappable_entries.
Also worth noting is the setting of mappable_end is taken out of setup
because we do it earlier now in the DRI2 case and therefore need to add
that tiny hunk to support the DRI1 IOCTL.
v2: Move up mappable end to before legacy AGP init
v3: Add the dev_priv inclusion here from previous rebase error in patch
5
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: squash in fix for a printk format flag mismatch warning.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have enough info to not use the intel_gtt bridge stuff.
v2: Move setup of mappable_base above the legacy init stuff because we
still need that on older platforms. (Daniel)
v3: Remove the dev_priv hunk which was rebased in by accident
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The purpose of the gtt structure is to help isolate our gtt specific
properties from the rest of the code (in doing so it help us finish the
isolation from the AGP connection).
The following members are pulled out (and renamed):
gtt_start
gtt_total
gtt_mappable_end
gtt_mappable
gtt_base_addr
gsm
The gtt structure will serve as a nice place to put gen specific gtt
routines in upcoming patches. As far as what else I feel belongs in this
structure: it is meant to encapsulate the GTT's physical properties.
This is why I've not added fields which track various drm_mm properties,
or things like gtt_mtrr (which is itself a pretty transient field).
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[Ben modified commit messages]
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the assertion from the previous patch in place, it should be safe
to get rid gtt_mappable_total. Keeps things saner to not have to track
the same info in two places.
In order to keep the diff as simple as possible and keep with the
existing gtt_setup semantics we opt to keep gtt_mappable_end. It's not
as consistent with the 'total' used in the previous patch, but that can
be fixed later.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[Ben modified commit message]
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Both DRI1 and DRI2 can never specify a mappable size which goes past the
GTT size. Don't pretend otherwise.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's duplicated in the more useful gtt_total.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix up some copypaste errors in the PIPESTAT register for VLV.
SPRITE0_FLIP_DONE_INT_EN_VLV is bit 22, not bit 26.
SPRITE0_FLIPDONE_INT_STATUS_VLV is bit 14, not bit 15.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Using copywinwin10 as an example that is dependent upon emitting a lot
of relocations (2 per operation), we see improvements of:
c2d/gm45: 618000.0/sec to 623000.0/sec.
i3-330m: 748000.0/sec to 789000.0/sec.
(measured relative to a baseline with neither optimisations applied).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Userspace is able to hint to the kernel that its command stream and
auxiliary state buffers already hold the correct presumed addresses and
so the relocation process may be skipped if the kernel does not need to
move any buffers in preparation for the execbuffer. Thus for the common
case where the allotment of buffers is static between batches, we can
avoid the overhead of individually checking the relocation entries.
Note that this requires userspace to supply the domain tracking and
requests for workarounds itself that would otherwise be computed based
upon the relocation entries.
Using copywinwin10 as an example that is dependent upon emitting a lot
of relocations (2 per operation), we see improvements of:
c2d/gm45: 618000.0/sec to 632000.0/sec.
i3-330m: 748000.0/sec to 830000.0/sec.
(measured relative to a baseline with neither optimisations applied).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Fixup merge conflict in userspace header due to different
baseline trees.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of passing around the eb-objects hashtable and a separate object
list, we can include the object list into the eb-objects structure for
convenience.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The difference is that the kernel will then know that this memory will
be reclaimable in the near future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the existing checking inside bind_to_gtt() to the more appropriate
layer in order to prevent recreation of the pages after they have been
explicitly truncated.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As a means to investigate some bad system behaviour related to the
purging of the active, inactive and unbound lists, it is useful to be
able to manually control when those lists should be cleared.
v2: use _safe list iterators as we kick objects from the list as we
walk.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add a small comment explaining why we don't need to check and
wait for gpu resets, acked by Chris on irc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The two functions are rather similar, so merge them.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The two functions are rather similar, so merge them.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This variable is only used locally in the irq postinstall
functions for ivybridge and ironlake.
Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Otherwise it seems like we can get stuck with concurrent waiters.
Right now this /shouldn't/ be a problem, since all pending pageflip
waiters are serialized by the one mode_config.mutex, so there's at
most on waiter. But better paranoid than sorry, since this is tricky
code.
v2: WARN_ON(waitqueue_active) before waiting, as suggested by Chris
Wilson.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel writes:
- seqno wrap fixes and debug infrastructure from Mika Kuoppala and Chris
Wilson
- some leftover kill-agp on gen6+ patches from Ben
- hotplug improvements from Damien
- clear fb when allocated from stolen, avoids dirt on the fbcon (Chris)
- Stolen mem support from Chris Wilson, one of the many steps to get to
real fastboot support.
- Some DDI code cleanups from Paulo.
- Some refactorings around lvds and dp code.
- some random little bits&pieces
* tag 'drm-intel-next-2012-12-21' of git://people.freedesktop.org/~danvet/drm-intel: (93 commits)
drm/i915: Return the real error code from intel_set_mode()
drm/i915: Make GSM void
drm/i915: Move GSM mapping into dev_priv
drm/i915: Move even more gtt code to i915_gem_gtt
drm/i915: Make next_seqno debugs entry to use i915_gem_set_seqno
drm/i915: Introduce i915_gem_set_seqno()
drm/i915: Always clear semaphore mboxes on seqno wrap
drm/i915: Initialize hardware semaphore state on ring init
drm/i915: Introduce ring set_seqno
drm/i915: Missed conversion to gtt_pte_t
drm/i915: Bug on unsupported swizzled platforms
drm/i915: BUG() if fences are used on unsupported platform
drm/i915: fixup overlay stolen memory leak
drm/i915: clean up PIPECONF bpc #defines
drm/i915: add intel_dp_set_signal_levels
drm/i915: remove leftover display.update_wm assignment
drm/i915: check for the PCH when setting pch_transcoder
drm/i915: Clear the stolen fb before enabling
drm/i915: Access to snooped system memory through the GTT is incoherent
drm/i915: Remove stale comment about intel_dp_detect()
...
Conflicts:
drivers/gpu/drm/i915/intel_display.c
We stopped reading FORCEWAKE for posting reads in
commit 8dee3eea3ccd3b6c00a8d3a08dd715d6adf737dd
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Sat Sep 1 22:59:50 2012 -0700
drm/i915: Never read FORCEWAKE
and started using something from the same cacheline instead. On the
bug reporter's machine this broke entering rc6 states after a
suspend/resume cycle. It turns out reading ECOBUS as posting read
worked fine, while GTFIFODBG did not, preventing RC6 states after
suspend/resume per the bug report referenced below. It's not entirely
clear why, but clearly GTFIFODBG was nowhere near the same cacheline
or address range as FORCEWAKE.
Trying out various registers for posting reads showed that all tested
registers for which NEEDS_FORCE_WAKE() (in i915_drv.c) returns true
work. Conversely, most (but not quite all) registers for which
NEEDS_FORCE_WAKE() returns false do not work. Details in the referenced
bug.
Based on the above, add posting reads on ECOBUS where GTFIFODBG was
previously relied on.
In true cargo cult spirit, add posting reads for FORCEWAKE_VLV writes as
well, but instead of ECOBUS, use FORCEWAKE_ACK_VLV which is in the same
address range as FORCEWAKE_VLV.
v2: Add more details to the commit message. No functional changes.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52411
Reported-and-tested-by: Alexander Bersenev <bay@hackerdom.ru>
CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
[danvet: add cc: stable and make the commit message a bit clearer that
this is a regression fix and what exactly broke.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the slow path, we are forced to copy the relocations prior to
acquiring the struct mutex in order to handle pagefaults. We forgo
copying the new offsets back into the relocation entries in order to
prevent a recursive locking bug should we trigger a pagefault whilst
holding the mutex for the reservations of the execbuffer. Therefore, we
need to reset the presumed_offsets just in case the objects are rebound
back into their old locations after relocating for this exexbuffer - if
that were to happen we would assume the relocations were valid and leave
the actual pointers to the kernels dangling, instant hang.
Fixes regression from commit bcf50e2775bbc3101932d8e4ab8c7902aa4163b4
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sun Nov 21 22:07:12 2010 +0000
drm/i915: Handle pagefaults in execbuffer user relocations
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@fwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some machines detect an eDP port even if it's not really there, and eDP
initialization has a fail path for this. Typically such machines have an
LVDS display instead. A regression introduced in
commit 82ed61fa1a4e08d5f9e86fb1b715b50ed678b6ac
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Oct 20 20:57:41 2012 +0200
drm/i915: make edp panel power sequence setup more robust
updated the power sequence registers PCH_PP_ON_DELAYS, PCH_PP_OFF_DELAYS,
and PCH_PP_DIVISOR also in the ghost eDP case, messing up the LVDS display.
Split the power sequencer initialization into two, delaying the register
updates until after we know the eDP is real.
Note: Keep the PP_CONTROL unlocking in the first part, even if it does not
update registers, per the commit message of the above mentioned commit.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52601
Reported-and-tested-by: Ryan Coe <ryan@rycomotorsports.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
