Commit Graph

76 Commits

Author SHA1 Message Date
Sibi Sankar
57f72170a2 remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
Any access to the dynamically allocated metadata region by the application
processor after assigning it to the remote Q6 will result in a XPU
violation. Fix this by replacing the dynamically allocated memory region
with a no-map carveout and unmap the modem metadata memory region before
passing control to the remote Q6.

Reported-and-tested-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: 6c5a9dc248 ("remoteproc: qcom: Make secure world call for mem ownership switch")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-7-quic_sibis@quicinc.com
2023-01-18 21:36:17 -06:00
Christoph Hellwig
a899d542b6 Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
This reverts commit fc156629b2.

This commit manages to do three API violations at once:

 - dereference the return value of dma_alloc_attrs with the
   DMA_ATTR_NO_KERNEL_MAPPING mapping, which is clearly forbidden and
   will do the wrong thing on various dma mapping implementations.  The
   fact that dma-direct uses a struct page as a cookie is an undocumented
   implementation detail
 - include dma-map-ops.h and use pgprot_dmacoherent despite a clear
   comment documenting that this is not acceptable
 - use of the VM_DMA_COHERENT for something that is not the dma-mapping
   code
 - use of VM_FLUSH_RESET_PERMS for vmap, while it is only supported for
   vmalloc

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-6-quic_sibis@quicinc.com
2023-01-18 21:36:17 -06:00
Sireesh Kodali
0201f75959 remoteproc: qcom: q6v5-mss: Add modem support on MSM8953
The modem on the MSM8953 platform is similar to the modem on the MSM8996
platform in terms of set up. It differs primarily in that TZ needs to be
informed of the modem start address and pas_id.

Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908182433.466908-8-stephan.gerhold@kernkonzept.com
2022-12-27 10:03:12 -06:00
Stephan Gerhold
ed71c47f00 remoteproc: qcom: q6v5-mss: Add support for MSM8909
Port the initialization sequence necessary for booting the modem remote
processor on the MSM8909 SoC from Qualcomm's msm-3.10 release [1].
The sequence is actually similar to the existing one for MSM8996 and
MSM8998 except that there is no separate QDSP6SS_MEM_PWR_CTL register
and most of the "memories" are enabled at once instead of sequentially.

To reuse the existing code just insert some if statements where needed
and add a configuration similar to the one from MSM8916.

[1]: 56dcedc8da

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908182433.466908-6-stephan.gerhold@kernkonzept.com
2022-12-27 10:03:12 -06:00
Dmitry Baryshkov
4c6e20077b remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config
MSM8996 follows the rest of MSS devices and requires a vote on MX and CX
power domains. Add corresponding entry to the device data.

Fixes: 4760a896be ("remoteproc: q6v5-mss: Vote for rpmh power domains")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704162202.819051-1-dmitry.baryshkov@linaro.org
2022-07-18 15:32:33 -05:00
Sibi Sankar
c2ca7a2e4b remoteproc: qcom_q6v5: Introduce panic handler for MSS
Make the MSS q6v5 remoteproc drivers implement the panic handler
that will invoke a stop to prepare the remoteprocs for post mortem
debugging.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653396335-6295-3-git-send-email-quic_sibis@quicinc.com
2022-07-18 15:32:33 -05:00
Sibi Sankar
2aa9f1aaa0 remoteproc: qcom_q6v5_mss: Update MBA log info
Update MBA text logs location/size in IMEM to aid tools extract
them after ramdump collection. The size of the MBA text logs is
pre-determined and limited to 4K.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653396335-6295-2-git-send-email-quic_sibis@quicinc.com
2022-07-18 15:32:33 -05:00
Sibi Sankar
fc156629b2 remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use
The application processor accessing the dynamically assigned metadata
region after assigning it to the remote Q6 would lead to an XPU violation.
Fix this by un-mapping the metadata region post firmware header copy. The
metadata region is freed only after the modem Q6 is done with fw header
authentication.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1652248625-990-1-git-send-email-quic_sibis@quicinc.com
2022-07-18 15:32:33 -05:00
Linus Torvalds
2c54e18406 remoteproc updates for v5.18
In the remoteproc core, it's now possible to mark the sysfs attributes
 read only on a per-instance basis, which is then used by the TI wkup M3
 driver. The rproc_shutdown() interface propagates errors to the caller
 and an array underflow is fixed in the debugfs interface. The
 rproc_da_to_va() API is moved to the public API to allow e.g. child
 rpmsg devices to acquire pointers to memory shared with the remote
 processor.
 
 The TI K3 R5F and DSP drivers gains support for attaching to instances
 already started by the bootloader, aka IPC-only mode.
 
 The Mediatek remoteproc driver gains support for the MT8186 SCP. The
 driver's probe function is reordered and moved to use the devres version
 of rproc_alloc() to save a few gotos. The driver's probe function is
 also transitioned to use dev_err_probe() to provide better debug
 support.
 
 Support for the Qualcomm SC7280 Wireless Subsystem (WPSS) is introduced.
 The Hexagon based remoteproc drivers gains support for voting for
 interconnect bandwidth during launch of the remote processor. The modem
 subsystem (MSS) driver gains support for probing the BAM-DMUX
 driver, which provides the network interface towards the modem on a set
 of older Qualcomm platforms.
 In addition a number a bug fixes are introduces in the Qualcomm drivers.
 
 Lastly Qualcomm ADSP DeviceTree binding is converted to YAML format, to
 allow validation of DeviceTree source files.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmJDx6EbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FkEgQAN0rLCX4WeFFdkvErBcl
 7vvkVfr8Yz8hpTT72Dx9lAuX/IwZSpIU2PaIkfhsjNOxDPodCLYz1aep/xzVyNT1
 sFaQ7RSF3ejbkOJcBcrF4FuGb7ryDY839TmTOAX098I7U+kCKZG0zncBmNBpGI9+
 O0yBMDcpKR8/RnrUTIb90rVnzEXrQG53yTakPXjk5Vsimb29SbkRhcrYFgF9I3/T
 AwwFZiRlxQ0Q9bHz/junVJP4caRpMk2VTPBaDGaQhhnXZQQTCP+BnbtZDLj+VdfD
 fpG0Puen9yqxdW5WnPfLz77vz9wGnhTTzUZeOM2cRBFOXQiP6vzOxdBi4UjT4R37
 bpR4FqmxnE9EQlKuBau6OtBpCQMRKze3530EGGef+5cT3OXzWXYYMsZaJ3dkVdii
 WTTd18qRgprlCB3QJBx4lsETruHSKIonZ5kmEiK3sNJDrdQdNs1OcSMiJcs6p1DP
 P5eY8NW4w8+RrjSySmWDVcjUBEZkDTFiqetqMe46VCwU/8I8QKcqLHKZNw06WiD2
 CU7vpxK/VEKpXU1c4dxA92uH/aKHUdx3yuigpV9GIRT67YSsqDQmOpYHc9iHBna7
 PwAhD5GJo08dIpkhz/+4DIuhot6yKvWNHITHap6YcEBktZNQ8zavxUWFZRDZmgx7
 /do4s7YzlvQlI/Qu407bVJFn
 =lj/5
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

Pull remoteproc updates from Bjorn Andersson:
 "In the remoteproc core, it's now possible to mark the sysfs attributes
  read only on a per-instance basis, which is then used by the TI wkup
  M3 driver.

  Also, the rproc_shutdown() interface propagates errors to the caller
  and an array underflow is fixed in the debugfs interface. The
  rproc_da_to_va() API is moved to the public API to allow e.g. child
  rpmsg devices to acquire pointers to memory shared with the remote
  processor.

  The TI K3 R5F and DSP drivers gains support for attaching to instances
  already started by the bootloader, aka IPC-only mode.

  The Mediatek remoteproc driver gains support for the MT8186 SCP. The
  driver's probe function is reordered and moved to use the devres
  version of rproc_alloc() to save a few gotos. The driver's probe
  function is also transitioned to use dev_err_probe() to provide better
  debug support.

  Support for the Qualcomm SC7280 Wireless Subsystem (WPSS) is
  introduced. The Hexagon based remoteproc drivers gains support for
  voting for interconnect bandwidth during launch of the remote
  processor. The modem subsystem (MSS) driver gains support for probing
  the BAM-DMUX driver, which provides the network interface towards the
  modem on a set of older Qualcomm platforms. In addition a number a bug
  fixes are introduces in the Qualcomm drivers.

  Lastly Qualcomm ADSP DeviceTree binding is converted to YAML format,
  to allow validation of DeviceTree source files"

* tag 'rproc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
  remoteproc: qcom_q6v5_mss: Create platform device for BAM-DMUX
  remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
  dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
  dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
  remoteproc: k3-dsp: Add support for IPC-only mode for all K3 DSPs
  remoteproc: k3-dsp: Refactor mbox request code in start
  remoteproc: k3-r5: Add support for IPC-only mode for all R5Fs
  remoteproc: k3-r5: Refactor mbox request code in start
  remoteproc: Change rproc_shutdown() to return a status
  remoteproc: qcom: q6v5: Add interconnect path proxy vote
  remoteproc: mediatek: Support mt8186 scp
  dt-bindings: remoteproc: mediatek: Add binding for mt8186 scp
  remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
  remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
  remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
  remoteproc: move rproc_da_to_va declaration to remoteproc.h
  remoteproc: wkup_m3: Set sysfs_read_only flag
  remoteproc: Introduce sysfs_read_only flag
  remoteproc: Fix count check in rproc_coredump_write()
  remoteproc: mtk_scp: Use dev_err_probe() where possible
  ...
2022-03-30 10:50:48 -07:00
Stephan Gerhold
59983c74fc remoteproc: qcom_q6v5_mss: Create platform device for BAM-DMUX
The modem remoteproc on older Qualcomm SoCs (e.g. MSM8916 and MSM8974)
implements the BAM-DMUX protocol to allow access to the network data
channels of the modem. The hardware/firmware resources required to
implement the BAM-DMUX driver are described in an extra node in the
device tree (with the compatible "qcom,bam-dmux").

This node logically belongs below the modem remoteproc, so that both
control interfaces (rpmsg_wwan_ctrl) and network interfaces (bam_dmux)
have a common parent.

Unlike other child devices of the modem remoteproc, the bam-dmux device
currently does not follow the state of the remoteproc (i.e. it is not
added/removed when the remoteproc is started/stopped). However, this is
an implementation detail of the bam_dmux driver in Linux that might
change in the future.

To be flexible for future changes, create a standard platform device
specifically only for "qcom,bam-dmux", rather than populating all child
nodes. This is also more consistent with the way the other child nodes
are handled in the driver.

Note: of_platform_device_create() and of_node_put() have NULL-checks
internally, so there is no need to check if the "qcom,bam-dmux" node
actually exists in the device tree.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228225400.146555-2-stephan@gerhold.net
2022-03-11 20:21:56 -06:00
Miaoqian Lin
07a5dcc4be remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.

This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases.

Fixes: 278d744c46 ("remoteproc: qcom: Fix potential device node leaks")
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308064522.13804-1-linmq006@gmail.com
2022-03-11 14:03:41 -06:00
Bjorn Andersson
8bd42e2341 soc: qcom: mdt_loader: Allow hash segment to be split out
It's been observed that some firmware found in a Qualcomm SM8450 device
has the hash table in a separate .bNN file. Use the newly extracted
helper function to load this segment from the separate file, if it's
determined that the hashes are not part of the already loaded firmware.

In order to do this, the function needs access to the firmware basename
and to provide more useful error messages a struct device to associate
the errors with.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-4-bjorn.andersson@linaro.org
2022-02-03 15:32:30 -06:00
zhaoxiao
9db9c738ac remoteproc: qcom_q6v5_mss: Use devm_platform_ioremap_resource_byname() to simplify code
In this function, devm_platform_ioremap_resource_byname() should be
suitable to simplify code.

Signed-off-by: zhaoxiao <long870912@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210906071147.9095-1-long870912@gmail.com
2021-10-15 09:49:55 -05:00
Sibi Sankar
c842379d00 remoteproc: mss: q6v5-mss: Add modem support on SC7280
Add out of reset sequence support for modem sub-system on SC7280 SoCs.
It requires access to an additional set of qaccept registers, external
power/clk control registers and halt vq6 register to put the modem back
into reset.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-6-git-send-email-sibis@codeaurora.org
2021-09-27 18:37:34 -05:00
Sibi Sankar
c1fe10d238 remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
The power domains exposed by the AOSS QMP driver control the load state
resources linked to modem, adsp, cdsp remoteprocs. These are used to
notify the Always on Subsystem (AOSS) that a particular co-processor is
up/down. AOSS uses this information to wait for the co-processors to
suspend before starting its sleep sequence.

These co-processors enter low-power modes independent to that of the
application processor and the load state resources linked to them are
expected to remain unaltered across system suspend/resume cycles. To
achieve this behavior lets stop using the power-domains exposed by the
AOSS QMP node and replace them with generic qmp_send interface instead.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[bjorn: Fixed up build error in q6v5_wcss_remove()]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-5-git-send-email-sibis@codeaurora.org
2021-09-27 15:43:29 -05:00
Bjorn Andersson
3d2ee78906 remoteproc: qcom_q6v5_mss: Validate p_filesz in ELF loader
Analog to the issue in the common mdt_loader code the MSS ELF loader
does not validate that p_filesz bytes will fit in the memory region and
that the loaded segments are not truncated. Fix this in the same way
as proposed for the mdt_loader.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 135b9e8d1c ("remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load")
Link: https://lore.kernel.org/r/20210312232002.3466791-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18 07:54:44 -05:00
Bjorn Andersson
9af2a2a9c6 remoteproc: qcom_q6v5_mss: Provide errors for firmware-name parsing
Failing to read the "firmware-name" DT property without informing the
developer is annoying, add some helpful debug prints.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210312002605.3273255-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18 07:54:31 -05:00
Zhang Qilong
a247230500 remoteproc: q6v5-mss: fix error handling in q6v5_pds_enable
If the pm_runtime_get_sync failed in q6v5_pds_enable when
loop (i), The unroll_pd_votes will start from (i - 1), and
it will resulted in following problems:

  1) pm_runtime_get_sync will increment pm usage counter even it
     failed. Forgetting to pm_runtime_put_noidle will result in
     reference leak.

  2) Have not reset pds[i] performance state.

Then we fix it.

Fixes: 4760a896be ("remoteproc: q6v5-mss: Vote for rpmh power domains")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143433.143996-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10 13:23:14 -06:00
Bjorn Andersson
ed5da80873 remoteproc: qcom: q6v5: Query sysmon before graceful shutdown
Requesting a graceful shutdown through the shared memory state signals
will not be acked in the event that sysmon has already successfully shut
down the remote firmware. So extend the stop request API to optionally
take the remoteproc's sysmon instance and query if there's already been
a successful shutdown attempt, before doing the signal dance.

Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20201122054135.802935-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25 23:05:24 -06:00
Sibi Sankar
a7ed5e57bd remoteproc: qcom_q6v5_mss: map/unmap MBA region before/after use
The application processor accessing the MBA region after assigning it to
the remote Q6 would lead to an XPU violation. Fix this by un-mapping the
MBA region post firmware copy and MBA text log dumps.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1604473422-29639-2-git-send-email-sibis@codeaurora.org
[bjorn: Renamed "ptr" to "mba_region"]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24 10:20:29 -06:00
Sibi Sankar
04ff5d19cf remoteproc: qcom_q6v5_mss: Replace ioremap with memremap
Fix the sparse warnings reported by the kernel test bot by replacing
ioremap calls with memremap.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1604473422-29639-1-git-send-email-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24 10:19:02 -06:00
Stephan Gerhold
8750cf3923 remoteproc: qcom_q6v5_mss: Allow replacing regulators with power domains
Newer platforms vote for necessary power domains through the power
domain subsystem. For historical reasons older platforms like MSM8916
or MSM8974 still control these as regulators.

Managing them as power domains is preferred since that allows us
to vote for corners instead of raw voltages.

Make it possible for MSM8916 and MSM8974 to manage these as power
domains. For compatibility with old device trees we still need to
support falling back to the regulators when necessary.

The way this is implemented here is that the deprecated regulators
are defined as "fallback_proxy_supply". Only if attaching the power
domains fails because they are not specified (-ENODATA) we request
and manage the fallback regulators instead.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200916104135.25085-7-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26 10:22:16 -05:00
Sibi Sankar
4360f93ac3 remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot
On secure devices which support warm reset, the MBA firmware requires
access to the modem region to clear them out. Hence provide Q6 access
to this region before MBA boot. This will be a nop during a modem SSR.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200917175840.18708-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-25 23:33:23 -05:00
Linus Torvalds
617e7481d7 remoteproc updates for v5.9
This introduces a new "detached" state for remote processors that are
 deemed to be running at the time Linux boots and the infrastructure for
 "attaching" to these. It then introduces the support for performing this
 operation for the STM32 platform.
 
 The coredump functionality is moved out from the core file and gains
 support for an optional mode where the recovery phase awaits the
 notification from devcoredump that the dump should be released. This
 allows userspace to grab the coredump in scenarios where vmalloc space
 is too low for creating a complete copy of the coredump before handing
 this to devcoredump.
 
 A new character device based interface is introduced to allow tying the
 stoppage of a remote processor to the termination of a user space
 process. This is useful in situations when such process provides crucial
 resources/operations for the firmware running on the remote processor.
 
 The Texas Instrument K3 driver gains support for the C66x and C71x DSPs.
 
 Qualcomm remoteprocs gains support for stashing relocation information
 in IMEM, to aid post mortem debugging and the crash notification
 mechanism is generalized to be reusable in cases where loosely coupled
 drivers needs to know about the status of a remote processor. One such
 example is the IPA hardware block, which is jointly owned with the
 modem and migrated to this improved interface.
 
 It also introduces a number of bug fixes and debug improvements for the
 Qualcomm modem remoteproc driver.
 
 And it cleans up the inconsistent interface for remoteproc drivers to
 implement power management.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl8yKn4bHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FwNQQAMH8rbJ1wY+FM5vYfchF
 IIruKUAuiUYf3Wtx96nRRM81nWQWE0+gh37CGdQ0J+5XMhtVVgHH5cIcTcTqHfAG
 J8rdkcFP4ntyLPa2qP5tPeMj0rqD/cHvzD10PyrJjvP12i9+0mJGR/nDHRRAhyg1
 HMTfq5kQsIRt3SYnHrwzD3nvk+O6aEtyogjDX9VhQ3Qx62pKVLiPCUy4FIZ2XzY2
 XvNdITqN1IbqMMEgWNLBrFbU8RDnFZgGUFjuVmy+9SalKifh1s0nmdDxmFihbbhj
 pltc8mLRabhkkdqctvz6nh85epkqmoA15WL+BTLDVIpQ4zSJxFeRq+yK5m3V5EzZ
 Ld5ukS3IYaLLFOT1OvwjUVbrSVYnb3SMFI6W2v8J/BouBzFzzfYaq4QmvW4GGPEw
 MWMoicpmZousVGfUREFkmYj/8XqfgoVZ8gpLVxNDuluFU5swjoAK2FfQet4KCf0d
 /+A77nWvcRuHFYLv8FAiAxxRY2Dnx8rPnIm8wNd4Nj9Lx7lhkVPRwCgBr4SyXX60
 FAGqZmg5S0Q5JUVA1s76n/1jbDywr6+a9ez48izivck1eYqAwSOAtt57Ol4A9tEq
 OGX8bvnJBXM9mDOV2jRCOr3vfn9Y3kqn8ia20gNsmifUM6RkvvSzz4bdhwd0Aj2H
 0PWNiyPI+OKV8L64Q4sASbDR
 =9cjt
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This introduces a new "detached" state for remote processors that are
  deemed to be running at the time Linux boots and the infrastructure
  for "attaching" to these. It then introduces the support for
  performing this operation for the STM32 platform.

  The coredump functionality is moved out from the core file and gains
  support for an optional mode where the recovery phase awaits the
  notification from devcoredump that the dump should be released. This
  allows userspace to grab the coredump in scenarios where vmalloc space
  is too low for creating a complete copy of the coredump before handing
  this to devcoredump.

  A new character device based interface is introduced to allow tying
  the stoppage of a remote processor to the termination of a user space
  process. This is useful in situations when such process provides
  crucial resources/operations for the firmware running on the remote
  processor.

  The Texas Instrument K3 driver gains support for the C66x and C71x
  DSPs.

  Qualcomm remoteprocs gains support for stashing relocation information
  in IMEM, to aid post mortem debugging and the crash notification
  mechanism is generalized to be reusable in cases where loosely coupled
  drivers needs to know about the status of a remote processor. One such
  example is the IPA hardware block, which is jointly owned with the
  modem and migrated to this improved interface.

  It also introduces a number of bug fixes and debug improvements for
  the Qualcomm modem remoteproc driver.

  And it cleans up the inconsistent interface for remoteproc drivers to
  implement power management"

* tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (56 commits)
  remoteproc: core: Register the character device interface
  remoteproc: Add remoteproc character device interface
  remoteproc: kill IPA notify code
  net: ipa: new notification infrastructure
  remoteproc: k3-dsp: Add support for C71x DSPs
  dt-bindings: remoteproc: k3-dsp: Update bindings for C71x DSPs
  remoteproc: k3-dsp: Add support for L2RAM loading on C66x DSPs
  remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs
  dt-bindings: remoteproc: Add bindings for C66x DSPs on TI K3 SoCs
  remoteproc: k3: Add TI-SCI processor control helper functions
  remoteproc: Introduce rproc_of_parse_firmware() helper
  dt-bindings: arm: keystone: Add common TI SCI bindings
  remoteproc: qcom_q6v5_mss: Remove redundant running state
  remoteproc: qcom: q6v5: Update running state before requesting stop
  remoteproc: qcom_q6v5_mss: Add modem debug policy support
  remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load
  remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load
  rpmsg: update documentation
  remoteproc: qcom_q6v5_mss: Add MBA log extraction support
  remoteproc: Add coredump debugfs entry
  ...
2020-08-11 11:17:45 -07:00
Alex Elder
2f3ee5e481 remoteproc: kill IPA notify code
The IPA code now uses the generic remoteproc SSR notification
mechanism.  This makes the original IPA notification code unused
and unnecessary, so get rid of it.

This is effectively a revert of commit d7f5f3c89c ("remoteproc:
add IPA notification to q6v5 driver").

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200724181142.13581-3-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-28 17:11:02 -07:00
Sibi Sankar
42a51c7504 remoteproc: qcom_q6v5_mss: Remove redundant running state
Remove the redundant running state, as an equivalent is maintained in
the common q6v5 resource handling helpers.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200602163257.26978-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27 23:22:22 -07:00
Sibi Sankar
fe6a5dc4b0 remoteproc: qcom_q6v5_mss: Add modem debug policy support
Add modem debug policy support which will enable coredumps and live
debug support when the msadp firmware is present on secure devices.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200722201047.12975-4-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27 23:21:24 -07:00
Sibi Sankar
135b9e8d1c remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load
The following mem abort is observed when one of the modem blob firmware
size exceeds the allocated mpss region. Fix this by restricting the copy
size to segment size using request_firmware_into_buf before load.

Err Logs:
Unable to handle kernel paging request at virtual address
Mem abort info:
...
Call trace:
  __memcpy+0x110/0x180
  rproc_start+0xd0/0x190
  rproc_boot+0x404/0x550
  state_store+0x54/0xf8
  dev_attr_store+0x44/0x60
  sysfs_kf_write+0x58/0x80
  kernfs_fop_write+0x140/0x230
  vfs_write+0xc4/0x208
  ksys_write+0x74/0xf8
...

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200722201047.12975-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27 23:21:19 -07:00
Sibi Sankar
e013f455d9 remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load
The following mem abort is observed when the mba firmware size exceeds
the allocated mba region. MBA firmware size is restricted to a maximum
size of 1M and remaining memory region is used by modem debug policy
firmware when available. Hence verify whether the MBA firmware size lies
within the allocated memory region and is not greater than 1M before
loading.

Err Logs:
Unable to handle kernel paging request at virtual address
Mem abort info:
...
Call trace:
  __memcpy+0x110/0x180
  rproc_start+0x40/0x218
  rproc_boot+0x5b4/0x608
  state_store+0x54/0xf8
  dev_attr_store+0x44/0x60
  sysfs_kf_write+0x58/0x80
  kernfs_fop_write+0x140/0x230
  vfs_write+0xc4/0x208
  ksys_write+0x74/0xf8
  __arm64_sys_write+0x24/0x30
...

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200722201047.12975-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27 23:21:13 -07:00
Sibi Sankar
318130cc93 remoteproc: qcom_q6v5_mss: Add MBA log extraction support
On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
at the beginning of the MBA region. Add support to extract the logs
which will be useful to debug mba boot/authentication issues.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200721112935.25716-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-21 21:18:59 -07:00
Rishabh Bhatnagar
76abf9cea6 remoteproc: Pass size and offset as arguments to segment dump function
Change the segment dump API signature to include size and offset
arguments. Refactor the qcom_q6v5_mss driver to use these
arguments while copying the segment. Doing this lays the ground
work for "inline" coredump functionality being added in the next
patch.

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/1594938035-7327-4-git-send-email-rishabhb@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-21 14:03:37 -07:00
Sibi Sankar
7ac516d39d remoteproc: qcom_q6v5_mss: Replace mask based tracking with size
In order to land inline coredump support for mss, the dump_segment
function would need to support granularities less than the segment
size. This is achieved by replacing mask based tracking with size.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/1594938035-7327-3-git-send-email-rishabhb@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-21 14:03:19 -07:00
Sibi Sankar
4e6751a1cf remoteproc: qcom_q6v5_mss: Monitor MSS_STATUS for boot completion
On secure devices there exists a race condition which could lock the MSS
CONFIG AHB bus thus preventing access to BOOT_STATUS register during SSR.
Switch to polling the MSS_STATUS register with an additional 10 us delay
to reliably track boot completion.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200716120514.21588-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-16 22:15:25 -07:00
Bjorn Andersson
d4c78d2167 remoteproc: qcom: Update PIL relocation info on load
Update the PIL relocation information in IMEM with information about
where the firmware for various remoteprocs are loaded.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-01 22:10:19 -07:00
Herbert Xu
7999096fa9 iov_iter: Move unnecessary inclusion of crypto/hash.h
The header file linux/uio.h includes crypto/hash.h which pulls in
most of the Crypto API.  Since linux/uio.h is used throughout the
kernel this means that every tiny bit of change to the Crypto API
causes the entire kernel to get rebuilt.

This patch fixes this by moving it into lib/iov_iter.c instead
where it is actually used.

This patch also fixes the ifdef to use CRYPTO_HASH instead of just
CRYPTO which does not guarantee the existence of ahash.

Unfortunately a number of drivers were relying on linux/uio.h to
provide access to linux/slab.h.  This patch adds inclusions of
linux/slab.h as detected by build failures.

Also skbuff.h was relying on this to provide a declaration for
ahash_request.  This patch adds a forward declaration instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-06-30 09:34:23 -04:00
Linus Torvalds
abfbb29297 remoteproc updates for v5.8
This introduces device managed versions of functions used to register
 remoteproc devices, add support for remoteproc driver specific resource
 control, enables remoteproc drivers to specify ELF class and machine for
 coredumps. It integrates pm_runtime in the core for keeping resources
 active while the remote is booted and holds a wake source while
 recoverying a remote processor after a firmware crash.
 
 It refactors the remoteproc device's allocation path to simplify the
 logic, fix a few cleanup bugs and to not clone const strings onto the
 heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
 zero-length array is replaced with flexible-array.
 
 A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
 SM8250 gains support for audio, compute and sensor remoteprocs and the
 Qualcomm SC7180 modem support is cleaned up and improved.
 
 The Qualcomm glink subsystem-restart driver is merged into the main
 glink driver, the Qualcomm sysmon driver is extended to properly notify
 remote processors about all other remote processors' state transitions.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl7egk0bHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FQnwQAM781m7BqSKdtbH0OzGB
 K4jGX/IkWCEluXx/RuDbPFV0mx/yLOfsrSzBBYnnTl+CXTgSLFtImRvwx5BFbnAl
 bRNbSlw1GLiV/w+HceIx1iKTELnkHKp4TT3zUmR+dZ+7pT1dhWXzHIjyjJPC1c7R
 L8qg3qlOrM620y3OJNUo57/20Tg9WN6kBKdaeyJKjmBsENrw6wggY30ijqhMgCYr
 9LgStPjtuSGgf4j55+BeTskVSnOvuun5NlVpRUVTo+ZDKTZAyO/8TKM+yWffAHc5
 7WkK0z9E3lhwdNPLif+dSIvhLjiyKR2yJf5KP7n9mFhA1tRVqNXnJqMCnAnwVvzT
 IpL1INYbirRwPfayhCsUSwKDTKkckKP9I/vZ7WKWJD9SWcc4eGWIifNDNGkMQ6qV
 7S0+6AyCANBltRPKTl6zwXSrrHuBUNkH3r9gddT5tPJu7Klh+fjKEywpsXkUd+IY
 Xo1nuT+mYrUgif0KTh656EK6YM5dFuVnZqOszzgiVUrdKeHKYBsUjWD7vS7DBeLe
 pLiDfo0qMb/J0sPptMt+0Rg/b/Nt1YiddW3ZlnVmWRCRjIQRJt9LQZcQoVhVv1Sa
 OQkhlvFTqIEFJfLtvp83zvL5WngxVM5Dq6mDiesAjZUhyode9ZtOGxr9zyhA4ApU
 njqp4n16OxcXaqjwp+k6eK8L
 =4k54
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This introduces device managed versions of functions used to register
  remoteproc devices, add support for remoteproc driver specific
  resource control, enables remoteproc drivers to specify ELF class and
  machine for coredumps. It integrates pm_runtime in the core for
  keeping resources active while the remote is booted and holds a wake
  source while recoverying a remote processor after a firmware crash.

  It refactors the remoteproc device's allocation path to simplify the
  logic, fix a few cleanup bugs and to not clone const strings onto the
  heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
  zero-length array is replaced with flexible-array.

  A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
  SM8250 gains support for audio, compute and sensor remoteprocs and the
  Qualcomm SC7180 modem support is cleaned up and improved.

  The Qualcomm glink subsystem-restart driver is merged into the main
  glink driver, the Qualcomm sysmon driver is extended to properly
  notify remote processors about all other remote processors' state
  transitions"

* tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits)
  remoteproc: Fix an error code in devm_rproc_alloc()
  MAINTAINERS: Add myself as reviewer for Ingenic rproc driver
  remoteproc: ingenic: Added remoteproc driver
  remoteproc: Add support for runtime PM
  dt-bindings: Document JZ47xx VPU auxiliary processor
  remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev()
  remoteproc: Fix and restore the parenting hierarchy for vdev
  remoteproc: Fall back to using parent memory pool if no dedicated available
  remoteproc: Replace zero-length array with flexible-array
  remoteproc: wcss: add support for rpmsg communication
  remoteproc: core: Prevent system suspend during remoteproc recovery
  remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
  remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
  remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
  dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs
  remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
  dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs
  remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
  dt-bindings: remoteproc: qcom: Use memory-region to reference memory
  remoteproc: qcom: pas: Add SC7180 Modem support
  ...
2020-06-08 13:01:08 -07:00
Sibi Sankar
9666174a4e remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
Remove unsed q6v5_da_to_va function as the mss driver uses a per segment
dump function.

Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415071619.6052-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-12 12:08:15 -07:00
Sibi Sankar
be050a3429 remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
The application processor accessing the mpss region when the Q6 modem is
running will lead to an XPU violation. Fix this by un-mapping the mpss
segments post copy during mpss authentication and coredumps.

Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415071619.6052-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-12 12:08:09 -07:00
Sibi Sankar
a9fdc79d48 remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
7C retail devices using MSA based boot will result in a fuse combination
which will prevent accesses to MSS PERPH register space where the mpss
clocks and halt-nav reside. So drop all accesses to the MPSS PERPH
register space. Issuing HALT NAV request and turning on the mss clocks
as part of SSR will no longer be required since the modem firmware will
have the necessary fixes to ensure that there are no pending NAV DMA
transactions.

Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415145110.20624-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-12 12:04:35 -07:00
Sibi Sankar
6663ce6fac remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
In the absence of mba and mpss sub-child extract the mba/mpss regions
from the memory-region property.

Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200421143228.8981-5-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-11 12:20:17 -07:00
Bjorn Andersson
cd9fc8f1b3 remoteproc: qcom: Pass ssr_name to glink subdevice
Pass ssr_name to glink subdevice in preparation for tying glink_ssr to
the glink subdevice, rather than having its own "ssr subdevice".

Acked-by: Chris Lew <clew@codeaurora.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20200423003736.2027371-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-07 11:03:55 -07:00
Clement Leger
3898fc99d1 remoteproc: use rproc_coredump_set_elf_info in drivers
Modify drivers which are using remoteproc coredump functionality to use
rproc_coredump_set_elf_info in order to create correct elf coredump
format.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Clement Leger <cleger@kalray.eu>
Link: https://lore.kernel.org/r/20200410102433.2672-3-cleger@kalray.eu
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-19 22:53:37 -07:00
Alex Elder
5839681002 remoteproc: qcom_q6v5_mss: fix q6v5_probe() error paths
If an error occurs in q6v5_probe() after the proxy power domains
are attached, but before qcom_add_ipa_notify_subdev() is called,
qcom_remove_ipa_notify_subdev() is called in the error path, which
is a bug.  Fix this by having that call be reached through a
different label.

Additionally, if qcom_add_sysmon_subdev() returns an error, the
subdevs that had already been added will not be properly removed.
Fix this by having the added subdevs (including the IPA notify one)
be removed in this case.

Finally, arrange for the sysmon subdev to be removed before the rest
in the event rproc_add() returns an error.

Have cleanup activity done in q6v5_remove() be done in the reverse
order they are set up in q6v5_probe() (the same order they're done
in the q6v5_probe() error path).  Use a local variable for the
remoteproc pointer, which is used repeatedly.

Remove errant semicolons at the end of two function blocks.

Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200403175005.17130-4-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-16 15:53:15 -07:00
Alex Elder
13c060b50a remoteproc: qcom_q6v5_mss: fix a bug in q6v5_probe()
If looking up the DT "firmware-name" property fails in q6v6_probe(),
the function returns without freeing the remoteproc structure
that has been allocated.  Fix this by jumping to the free_rproc
label, which takes care of this.

Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200403175005.17130-3-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-16 15:53:15 -07:00
Linus Torvalds
c657011431 remoteproc updates for v5.7
This introduces a range of improvements to the OMAP remoeteproc driver;
 among other things adding devicetree, suspend/resume and watchdog
 support, and adds support the remoteprocs in the DRA7xx SoC.
 
 It introduces support for 64-bit firmware, extends the ELF loader to
 support this and fixes for a number of race conditions in the recovery
 handling.
 
 It introduces a generic mechanism to allow remoteproc drivers to sync
 state with remote processors during a panic, and uses this to prepare
 Qualcomm remote processors for post mortem analysis.
 
 Finally it introduces fixes to cleanly recover from crashes in the modem
 firmware on production Qualcomm devices.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl6FObEbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FerQP/A4X/ONtMSwfamWseInj
 TRfYj5BOo6drGKavgG9NjQti2pUDfUo6wen906uRlgE48pEwToCVBZ1ERONj/pPD
 nsEzXWsZqDjVut9VH5Zhc+T9k+GJVlLkocu+EnpnS9uZ59ySuH/HFY0W6BoyVpuI
 2ltodDq9TGHY3nFkaAz+yQKGsqB3e0RqlqCsTHnKHxeOsaG+HLyH89QPUIQzYMAJ
 P+CyW+h62KnlW7I0nteX3M86nmDxD1S7lQg6NK9GMiuOyVw4FyGiO3+AnX9JBue8
 fFF1Z5344WT44IA7n/pjTdKtRy1R8CkwVKBzooWwpvGJo/3d3D1VcYN1S2IoNlb4
 L3j3tBSexhthekZ5nBowHdfv5cbTAlWQn8GwKXDRLw4TVrV+wVdeG3kXNbhD6Ka2
 sdAv5W4Eguap5dvlJqbC/d6cvQXiZOrzWogd0aqhSB6aMiyb+Pjol+kQZtNWIW1S
 CmvRFhlSnAwM0NLYQpXGzuaza8LvfMphG6+nwkneSD5IFclKQ+tUxmqOtt2dLqVG
 9gtiqSt7fO58I4KxtQGWvp3FBa4FVeH00hF+H0Xu2B9pEsWYr9N2Ua5CDlIJdWKV
 OS6sVHlYB1a+E4IpJ92GEBp/KwmRJsVCNRKkbDE3Y7UNFoNoTPhnVlsdx5Sa/stT
 lTQPYoIKmOF8hTZEzLM4Vc7n
 =5Q77
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:

 - a range of improvements to the OMAP remoeteproc driver; among other
   things adding devicetree, suspend/resume and watchdog support, and
   adds support the remoteprocs in the DRA7xx SoC

 - support for 64-bit firmware, extends the ELF loader to support this
   and fixes for a number of race conditions in the recovery handling

 - a generic mechanism to allow remoteproc drivers to sync state with
   remote processors during a panic, and uses this to prepare Qualcomm
   remote processors for post mortem analysis

 - fixes to cleanly recover from crashes in the modem firmware on
   production Qualcomm devices

* tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (37 commits)
  remoteproc/omap: Switch to SPDX license identifiers
  remoteproc/omap: Add watchdog functionality for remote processors
  remoteproc/omap: Report device exceptions and trigger recovery
  remoteproc/omap: Add support for runtime auto-suspend/resume
  remoteproc/omap: Add support for system suspend/resume
  remoteproc/omap: Request a timer(s) for remoteproc usage
  remoteproc/omap: Check for undefined mailbox messages
  remoteproc/omap: Remove the platform_data header
  remoteproc/omap: Add support for DRA7xx remote processors
  remoteproc/omap: Initialize and assign reserved memory node
  remoteproc/omap: Add the rproc ops .da_to_va() implementation
  remoteproc/omap: Add support to parse internal memories from DT
  remoteproc/omap: Add a sanity check for DSP boot address alignment
  remoteproc/omap: Add device tree support
  dt-bindings: remoteproc: Add OMAP remoteproc bindings
  remoteproc: qcom: Introduce panic handler for PAS and ADSP
  remoteproc: qcom: q6v5: Add common panic handler
  remoteproc: Introduce "panic" callback in ops
  remoteproc: Traverse rproc_list under RCU read lock
  remoteproc: Fix NULL pointer dereference in rproc_virtio_notify
  ...
2020-04-02 15:42:13 -07:00
Clement Leger
9ce3bf225e remoteproc: Use size_t type for len in da_to_va
With upcoming changes in elf loader for elf64 support, section size will
be a u64. When used with da_to_va, this will potentially lead to
overflow if using the current "int" type for len argument. Change
da_to_va prototype to use a size_t for len and fix all users of this
function.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Clement Leger <cleger@kalray.eu>
Link: https://lore.kernel.org/r/20200302093902.27849-2-cleger@kalray.eu
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25 22:29:38 -07:00
Sibi Sankar
d96f2571dc remoteproc: qcom_q6v5_mss: Reload the mba region on coredump
On secure devices after a wdog/fatal interrupt, the mba region has to be
refreshed in order to prevent the following errors during mba load.

Err Logs:
remoteproc remoteproc2: stopped remote processor 4080000.remoteproc
qcom-q6v5-mss 4080000.remoteproc: PBL returned unexpected status -284031232
qcom-q6v5-mss 4080000.remoteproc: PBL returned unexpected status -284031232
....
qcom-q6v5-mss 4080000.remoteproc: PBL returned unexpected status -284031232
qcom-q6v5-mss 4080000.remoteproc: MBA booted, loading mpss

Fixes: 7dd8ade24d ("remoteproc: qcom: q6v5-mss: Add custom dump function for modem")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200304194729.27979-4-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25 22:29:37 -07:00
Bjorn Andersson
715d852519 remoteproc: qcom_q6v5_mss: Validate each segment during loading
The code used to sync with the MBA after each segment loaded and this is
still what's done downstream. So reduce the delta towards downstream by
switching to a model where the content is iteratively validated.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200304194729.27979-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25 22:29:37 -07:00
Bjorn Andersson
900fc60df2 remoteproc: qcom_q6v5_mss: Don't reassign mpss region on shutdown
Trying to reclaim mpss memory while the mba is not running causes the
system to crash on devices with security fuses blown, so leave it
assigned to the remote on shutdown and recover it on a subsequent boot.

Fixes: 6c5a9dc248 ("remoteproc: qcom: Make secure world call for mem ownership switch")
Cc: stable@vger.kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200304194729.27979-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25 22:29:36 -07:00
Alex Elder
d7f5f3c89c remoteproc: add IPA notification to q6v5 driver
Set up a subdev in the q6v5 modem remoteproc driver that generates
event notifications for the IPA driver to use for initialization and
recovery following a modem shutdown or crash.

A pair of new functions provides a way for the IPA driver to register
and deregister a notification callback function that will be called
whenever modem events (about to boot, running, about to shut down,
etc.) occur.  A void pointer value (provided by the IPA driver at
registration time) and an event type are supplied to the callback
function.

One event, MODEM_REMOVING, is signaled whenever the q6v5 driver is
about to remove the notification subdevice.  It requires the IPA
driver de-register its callback.

This sub-device is only used by the modem subsystem (MSS) driver,
so the code that adds the new subdev and allows registration and
deregistration of the notifier is found in "qcom_q6v6_mss.c".

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08 22:07:09 -07:00