IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There is no need for a separate function to call
priv->info->mac_port_config(). Call it from mt753x_phylink_mac_config()
instead and remove mt753x_mac_config().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
priv->info->cpu_port_config() is used for MT7531 and the switch on the
MT7988 SoC. It sets up the ports described as a CPU port earlier than the
phylink code path would do.
This function is useless as:
- Configuring the MACs can be done from the phylink_mac_config code path
instead.
- All the link configuration it does on the CPU ports are later undone with
the port_enable, phylink_mac_config, and then phylink_mac_link_up code
path [1].
priv->p5_interface and priv->p6_interface were being used to prevent
configuring the MACs from the phylink_mac_config code path. Remove them now
that they hold no purpose.
Remove priv->info->cpu_port_config(). On mt753x_phylink_mac_config, switch
to if statements to simplify the code.
Remove the overwriting of the speed and duplex interfaces for certain
interface modes. Phylink already provides the speed and duplex variables
with proper values. Phylink already sets the max speed of TRGMII to
SPEED_1000. Add SPEED_2500 for PHY_INTERFACE_MODE_2500BASEX to where the
speed and EEE bits are set instead.
On the switch on the MT7988 SoC, PHY_INTERFACE_MODE_INTERNAL is being used
to describe the interface mode of the 10G MAC, which is of port 6. On
mt7988_cpu_port_config() PMCR_FORCE_SPEED_1000 was set via the
PMCR_CPU_PORT_SETTING() mask. Add SPEED_10000 case to where the speed bits
are set to cover this. No need to add it to where the EEE bits are set as
the "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows that these bits don't exist on the MT7530_PMCR_P(6)
register.
Remove the definition of PMCR_CPU_PORT_SETTING() now that it holds no
purpose.
Change mt753x_cpu_port_enable() to void now that there're no error cases
left.
Link: https://lore.kernel.org/netdev/ZHy2jQLesdYFMQtO@shell.armlinux.org.uk/ [1]
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove error returns on the cases where they are already handled with the
function the mac_port_get_caps member in mt753x_table points to.
mt7531_mac_config() is also called from mt7531_cpu_port_config() outside of
phylink but the port and interface modes are already handled there.
Change the functions and the mac_port_config function pointer to void now
that there're no error returns anymore.
Remove mt753x_is_mac_port() that used to help the said error returns.
On mt7531_mac_config(), switch to if statements to simplify the code.
Remove internal phy cases from mt753x_phylink_mac_config(), there is no
need to check the interface mode as that's already handled with the
function the mac_port_get_caps member in mt753x_table points to.
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to the document MT7531 Reference Manual for Development Board
v1.0, the SW_PHY_RST bit on the SYS_CTRL register doesn't exist for
MT7531. This is likely why forcing link down on all ports is necessary for
MT7531.
Therefore, do not set SW_PHY_RST on mt7531_setup().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Setting this register related to interrupts is only needed for the MT7530
switch. Make an exclusive check to ensure this.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For the switch on the MT7988 SoC, the mac_port_config member for ID_MT7988
in mt753x_table is not needed as the interfaces of all MACs are already
handled on mt7988_mac_port_get_caps().
Therefore, remove the mac_port_config member from ID_MT7988 in
mt753x_table. Before calling priv->info->mac_port_config(), if there's no
mac_port_config member in mt753x_table, exit mt753x_mac_config()
successfully.
Remove calling priv->info->mac_port_config() from the sanity check as the
sanity check requires a pointer to a mac_port_config function to be
non-NULL. This will fail for MT7988 as mac_port_config won't be a member of
its info table.
Co-developed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yunsheng Lin says:
====================
remove page frag implementation in vhost_net
Currently there are three implementations for page frag:
1. mm/page_alloc.c: net stack seems to be using it in the
rx part with 'struct page_frag_cache' and the main API
being page_frag_alloc_align().
2. net/core/sock.c: net stack seems to be using it in the
tx part with 'struct page_frag' and the main API being
skb_page_frag_refill().
3. drivers/vhost/net.c: vhost seems to be using it to build
xdp frame, and it's implementation seems to be a mix of
the above two.
This patchset tries to unfiy the page frag implementation a
little bit by unifying gfp bit for order 3 page allocation
and replacing page frag implementation in vhost.c with the
one in page_alloc.c.
After this patchset, we are not only able to unify the page
frag implementation a little, but also able to have about
0.5% performance boost testing by using the vhost_net_test
introduced in the last patch.
Before this patchset:
Performance counter stats for './vhost_net_test' (10 runs):
305325.78 msec task-clock # 1.738 CPUs utilized ( +- 0.12% )
1048668 context-switches # 3.435 K/sec ( +- 0.00% )
11 cpu-migrations # 0.036 /sec ( +- 17.64% )
33 page-faults # 0.108 /sec ( +- 0.49% )
244651819491 cycles # 0.801 GHz ( +- 0.43% ) (64)
64714638024 stalled-cycles-frontend # 26.45% frontend cycles idle ( +- 2.19% ) (67)
30774313491 stalled-cycles-backend # 12.58% backend cycles idle ( +- 7.68% ) (70)
201749748680 instructions # 0.82 insn per cycle
# 0.32 stalled cycles per insn ( +- 0.41% ) (66.76%)
65494787909 branches # 214.508 M/sec ( +- 0.35% ) (64)
4284111313 branch-misses # 6.54% of all branches ( +- 0.45% ) (66)
175.699 +- 0.189 seconds time elapsed ( +- 0.11% )
After this patchset:
Performance counter stats for './vhost_net_test' (10 runs):
303974.38 msec task-clock # 1.739 CPUs utilized ( +- 0.14% )
1048807 context-switches # 3.450 K/sec ( +- 0.00% )
14 cpu-migrations # 0.046 /sec ( +- 12.86% )
33 page-faults # 0.109 /sec ( +- 0.46% )
251289376347 cycles # 0.827 GHz ( +- 0.32% ) (60)
67885175415 stalled-cycles-frontend # 27.01% frontend cycles idle ( +- 0.48% ) (63)
27809282600 stalled-cycles-backend # 11.07% backend cycles idle ( +- 0.36% ) (71)
195543234672 instructions # 0.78 insn per cycle
# 0.35 stalled cycles per insn ( +- 0.29% ) (69.04%)
62423183552 branches # 205.357 M/sec ( +- 0.48% ) (67)
4135666632 branch-misses # 6.63% of all branches ( +- 0.63% ) (67)
174.764 +- 0.214 seconds time elapsed ( +- 0.12% )
Changelog:
V6: Add timeout for poll() and simplify some logic as suggested
by Jason.
V5: Address the comment from jason in vhost_net_test.c and the
comment about leaving out the gfp change for page frag in
sock.c as suggested by Paolo.
V4: Resend based on latest net-next branch.
V3:
1. Add __page_frag_alloc_align() which is passed with the align mask
the original function expected as suggested by Alexander.
2. Drop patch 3 in v2 suggested by Alexander.
3. Reorder patch 4 & 5 in v2 suggested by Alexander.
Note that placing this gfp flags handing for order 3 page in an inline
function is not considered, as we may be able to unify the page_frag
and page_frag_cache handling.
V2: Change 'xor'd' to 'masked off', add vhost tx testing for
vhost_net_test.
V1: Fix some typo, drop RFC tag and rebase on latest net-next.
====================
Link: https://lore.kernel.org/r/20240228093013.8263-1-linyunsheng@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
introduce vhost_net_test for both vhost_net tx and rx basing
on virtio_test to test vhost_net changing in the kernel.
Steps for vhost_net tx testing:
1. Prepare a out buf.
2. Kick the vhost_net to do tx processing.
3. Do the receiving in the tun side.
4. verify the data received by tun is correct.
Steps for vhost_net rx testing:
1. Prepare a in buf.
2. Do the sending in the tun side.
3. Kick the vhost_net to do rx processing.
4. verify the data received by vhost_net is correct.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The page frag in vhost_net_page_frag_refill() uses the
'struct page_frag' from skb_page_frag_refill(), but it's
implementation is similar to page_frag_alloc_align() now.
This patch removes vhost_net_page_frag_refill() by using
'struct page_frag_cache' instead of 'struct page_frag',
and allocating frag using page_frag_alloc_align().
The added benefit is that not only unifying the page frag
implementation a little, but also having about 0.5% performance
boost testing by using the vhost_net_test introduced in the
last patch.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When draining a page_frag_cache, most user are doing
the similar steps, so introduce an API to avoid code
duplication.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently there seems to be three page frag implementations
which all try to allocate order 3 page, if that fails, it
then fail back to allocate order 0 page, and each of them
all allow order 3 page allocation to fail under certain
condition by using specific gfp bits.
The gfp bits for order 3 page allocation are different
between different implementation, __GFP_NOMEMALLOC is
or'd to forbid access to emergency reserves memory for
__page_frag_cache_refill(), but it is not or'd in other
implementions, __GFP_DIRECT_RECLAIM is masked off to avoid
direct reclaim in vhost_net_page_frag_refill(), but it is
not masked off in __page_frag_cache_refill().
This patch unifies the gfp bits used between different
implementions by or'ing __GFP_NOMEMALLOC and masking off
__GFP_DIRECT_RECLAIM for order 3 page allocation to avoid
possible pressure for mm.
Leave the gfp unifying for page frag implementation in sock.c
for now as suggested by Paolo Abeni.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
napi_alloc_frag_align() and netdev_alloc_frag_align() accept
align as an argument, and they are thin wrappers around the
__napi_alloc_frag_align() and __netdev_alloc_frag_align() APIs
doing the alignment checking and align mask conversion, in order
to call page_frag_alloc_align() directly. The intention here is
to keep the alignment checking and the alignmask conversion in
in-line wrapper to avoid those kind of operations during execution
time since it can usually be handled during compile time.
We are going to use page_frag_alloc_align() in vhost_net.c, it
need the same kind of alignment checking and alignmask conversion,
so split up page_frag_alloc_align into an inline wrapper doing the
above operation, and add __page_frag_alloc_align() which is passed
with the align mask the original function expected as suggested by
Alexander.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GPIO EOI is not set to clear interrupt status after handling the
interrupt. It should be done in irq_chip->irq_ack, but this function
is not called in handle_nested_irq(). So executing function
txgbe_gpio_irq_ack() manually in txgbe_gpio_irq_handler().
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20240301092956.18544-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The register of GPIO interrupt status is masked before MAC IRQ
is enabled. This is because of hardware deficiency. So manually
clear the interrupt status before using them. Otherwise, GPIO
interrupts will never be reported again. There is a workaround for
clearing interrupts to set GPIO EOI in txgbe_up_complete().
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20240301092956.18544-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-28 (ixgbe, igc, igb, e1000e, e100)
This series contains updates to ixgbe, igc, igb, e1000e, and e100
drivers.
Jon Maxwell makes module parameter values readable in sysfs for ixgbe,
igb, and e100.
Ernesto Castellotti adds support for 1000BASE-BX on ixgbe.
Arnd Bergmann fixes build failure due to dependency issues for igc.
Vitaly refactors error check to be more concise and prevent future
issues on e1000e.
v1: https://lore.kernel.org/netdev/20240229004135.741586-1-anthony.l.nguyen@intel.com/
====================
Link: https://lore.kernel.org/r/20240301184806.2634508-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add curly braces to avoid entering to an if statement where it is not
always required in e1000_shutdown function.
This improves code readability and might prevent non-deterministic
behaviour in the future.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240301184806.2634508-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When IGC is built-in but LEDS_CLASS is a loadable module, there is
a link failure:
x86_64-linux-ld: drivers/net/ethernet/intel/igc/igc_leds.o: in function `igc_led_setup':
igc_leds.c:(.text+0x75c): undefined reference to `devm_led_classdev_register_ext'
Add another dependency that prevents this combination.
Fixes: ea578703b03d ("igc: Add support for LEDs on i225/i226")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240301184806.2634508-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Added support for 1000BASE-BX, i.e. Gigabit Ethernet over single strand
of single-mode fiber.
The initialization of a 1000BASE-BX SFP is the same as 1000BASE-SX/LX
with the only difference that the Bit Rate Nominal Value must be
checked to make sure it is a Gigabit Ethernet transceiver, as described
by the SFF-8472 specification.
This was tested with the FS.com SFP-GE-BX 1310/1490nm 10km transceiver:
$ ethtool -m eth4
Identifier : 0x03 (SFP)
Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector : 0x07 (LC)
Transceiver codes : 0x00 0x00 0x00 0x40 0x00 0x00 0x00 0x00 0x00
Transceiver type : Ethernet: BASE-BX10
Encoding : 0x01 (8B/10B)
BR, Nominal : 1300MBd
Rate identifier : 0x00 (unspecified)
Length (SMF,km) : 10km
Length (SMF) : 10000m
Length (50um) : 0m
Length (62.5um) : 0m
Length (Copper) : 0m
Length (OM3) : 0m
Laser wavelength : 1310nm
Vendor name : FS
Vendor OUI : 64:9d:99
Vendor PN : SFP-GE-BX
Vendor rev :
Option values : 0x20 0x0a
Option : RX_LOS implemented
Option : TX_FAULT implemented
Option : Power level 3 requirement
BR margin, max : 0%
BR margin, min : 0%
Vendor SN : S2202359108
Date code : 220307
Optical diagnostics support : Yes
Laser bias current : 17.650 mA
Laser output power : 0.2132 mW / -6.71 dBm
Receiver signal average optical power : 0.2740 mW / -5.62 dBm
Module temperature : 47.30 degrees C / 117.13 degrees F
Module voltage : 3.2576 V
Alarm/warning flags implemented : Yes
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 110.000 mA
Laser bias current low alarm threshold : 1.000 mA
Laser bias current high warning threshold : 100.000 mA
Laser bias current low warning threshold : 1.000 mA
Laser output power high alarm threshold : 0.7079 mW / -1.50 dBm
Laser output power low alarm threshold : 0.0891 mW / -10.50 dBm
Laser output power high warning threshold : 0.6310 mW / -2.00 dBm
Laser output power low warning threshold : 0.1000 mW / -10.00 dBm
Module temperature high alarm threshold : 90.00 degrees C / 194.00 degrees F
Module temperature low alarm threshold : -45.00 degrees C / -49.00 degrees F
Module temperature high warning threshold : 85.00 degrees C / 185.00 degrees F
Module temperature low warning threshold : -40.00 degrees C / -40.00 degrees F
Module voltage high alarm threshold : 3.7950 V
Module voltage low alarm threshold : 2.8050 V
Module voltage high warning threshold : 3.4650 V
Module voltage low warning threshold : 3.1350 V
Laser rx power high alarm threshold : 0.7079 mW / -1.50 dBm
Laser rx power low alarm threshold : 0.0028 mW / -25.53 dBm
Laser rx power high warning threshold : 0.6310 mW / -2.00 dBm
Laser rx power low warning threshold : 0.0032 mW / -24.95 dBm
Signed-off-by: Ernesto Castellotti <ernesto@castellotti.net>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240301184806.2634508-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linux users sometimes need an easy way to check current values of module
parameters. For example the module may be manually reloaded with different
parameters. Make these visible and readable in the /sys filesystem to allow
that. But don't make the "debug" module parameter visible as debugging is
enabled via ethtool msglvl.
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240301184806.2634508-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stephen Rothwell and kernel test robot reported that some arches
(parisc, hexagon) and/or compilers would not like blamed commit.
Lets make sure tcp_sock_write_rx group does not start with a hole.
While we are at it, correct tcp_sock_write_tx CACHELINE_ASSERT_GROUP_SIZE()
since after the blamed commit, we went to 105 bytes.
Fixes: 99123622050f ("tcp: remove some holes in struct tcp_sock")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/netdev/20240301121108.5d39e4f9@canb.auug.org.au/
Closes: https://lore.kernel.org/oe-kbuild-all/202403011451.csPYOS3C-lkp@intel.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20240301171945.2958176-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the dependsOn test check for all the mirred blockcast tests.
It will prevent the issue reported by LKFT which happens when an older
iproute2 is used to run the current tdc.
Tests are skipped if the dependsOn check fails.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20240229143825.1373550-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes :
- "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh
- "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh
Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228120701.422264-1-pvkumar5749404@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1. pcaps are free'd right after AQ routines are done, no need for
devm_'s
2. a test frame for loopback test in ethtool -t is destroyed at the end
of the test so we don't need devm_ here either.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_down() clears QINT_TQCTL_CAUSE_ENA_M bit twice, which is not
necessary. First clearing happens in ice_vsi_dis_irq() and second in
ice_vsi_stop_tx_ring() - remove the first one.
While at it, make ice_vsi_dis_irq() static as ice_down() is the only
current caller of it.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The indentation for ice_set_ctx and ice_write_rxq_ctx breaks the function
name after the return type. This style of breaking is used a lot throughout
the ice driver, even in cases where its not actually helpful for
readability. We no longer prefer this style of line splitting in the
driver, and new code is avoiding it.
Normally, I would leave this alone unless the actual function contents or
description needed updating. However, a future change is going to add
inverse functions for converting packed context to unpacked context
structures. To keep this code uniform with the existing set functions, fix
up the style to the modern format of keeping the type on the same line.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The functions used to pack the Tx and Rx context into the hardware format
rely on using BIT() and then subtracting 1 to get a bitmask. These
functions even have a comment about how x86 machines can't use this method
for certain widths because the SHL instructions will not work properly.
The Linux kernel already provides the GENMASK macro for generating a
suitable bitmask. Further, GENMASK is capable of generating the mask
including the shift_width. Since width is the total field width, take care
to subtract one to get the final bit position.
Since we now include the shifted bits as part of the mask, shift the source
value first before applying the mask.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In ice_common.c there are 4 functions used for converting the unpacked
software Tx and Rx context structure data into the packed format used by
hardware. These functions have extremely generic names:
* ice_write_byte
* ice_write_word
* ice_write_dword
* ice_write_qword
When I saw these function names my first thought was "write what? to
where?". Understanding what these functions do requires looking at the
implementation details. The functions take bits from an unpacked structure
and copy them into the packed layout used by hardware.
As part of live migration, we will want functions which perform the inverse
operation of reading bits from the packed layout and copying them into the
unpacked format. Naming these as "ice_read_byte", etc would be very
confusing since they appear to write data.
In preparation for adding this new inverse operation, rename the existing
functions to use the prefix "ice_pack_ctx_". This makes it clear that they
perform the bit packing while copying from the unpacked software context
structure to the packed hardware context.
The inverse operations can then neatly be named ice_unpack_ctx_*, clearly
indicating they perform the bit unpacking while copying from the packed
hardware context to the unpacked software context structure.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The lan_vsi_num field of the VF structure is no longer used for any
purpose. Remove it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When initializing over virtchnl, the PF is required to pass a VSI ID to the
VF as part of its capabilities exchange. The VF driver reports this value
back to the PF in a variety of commands. The PF driver validates that this
value matches the value it sent to the VF.
Some hardware families such as the E700 series could use this value when
reading RSS registers or communicating directly with firmware over the
Admin Queue.
However, E800 series hardware does not support any of these interfaces and
the VF's only use for this value is to report it back to the PF. Thus,
there is no requirement that this value be an actual VSI ID value of any
kind.
The PF driver already does not trust that the VF sends it a real VSI ID.
The VSI structure is always looked up from the VF structure. The PF does
validate that the VSI ID provided matches a VSI associated with the VF, but
otherwise does not use the VSI ID for any purpose.
Instead of reporting the VSI number relative to the PF space, report a
fixed value of 1. When communicating with the VF over virtchnl, validate
that the VSI number is returned appropriately.
This avoids leaking information about the firmware of the PF state.
Currently the ice driver only supplies a VF with a single VSI. However, it
appears that virtchnl has some support for allowing multiple VSIs. I did
not attempt to implement this. However, space is left open to allow further
relative indexes if additional VSIs are provided in future feature
development. For this reason, keep the ice_vc_isvalid_vsi_id function in
place to allow extending it for multiple VSIs in the future.
This change will also simplify handling of live migration in a future
series. Since we no longer will provide a real VSI number to the VF, there
will be no need to keep track of this number when migrating to a new host.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_vc_fdir_param_check() function validates that the VSI ID of the
virtchnl flow director command matches the VSI number of the VF. This is
already checked by the call to ice_vc_isvalid_vsi_id() immediately
following this.
This check is unnecessary since ice_vc_isvalid_vsi_id() already confirms
this by checking that the VSI ID can locate the VSI associated with the VF
structure.
Furthermore, a following change is going to refactor the ice driver to
report VSI IDs using a relative index for each VF instead of reporting the
PF VSI number. This additional check would break that logic since it
enforces that the VSI ID matches the VSI number.
Since this check duplicates the logic in ice_vc_isvalid_vsi_id() and gets
in the way of refactoring that logic, remove it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_vc_isvalid_q_id() function takes a VSI index and a queue ID. It
looks up the VSI from its index, and then validates that the queue number
is valid for that VSI.
The VSI ID passed is typically a VSI index from the VF. This VSI number is
validated by the PF to ensure that it matches the VSI associated with the
VF already.
In every flow where ice_vc_isvalid_q_id() is called, the PF driver already
has a pointer to the VSI associated with the VF. This pointer is obtained
using ice_get_vf_vsi(), rather than looking up the VSI using the index sent
by the VF.
Since we already know which VSI to operate on, we can modify
ice_vc_isvalid_q_id() to take a VSI pointer instead of a VSI index. Pass
the VSI we found from ice_get_vf_vsi() instead of re-doing the lookup. This
removes some unnecessary computation and scanning of the VSI list.
It also removes the last place where the driver directly used the VSI
number from the VF. This will pave the way for refactoring to communicate
relative VSI numbers to the VF instead of absolute numbers from the PF
space.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This error message is at best not really helpful and at worst
misleading. If we're here in idpf_intr_rel we're likely trying to do
remove or reset. If we're in reset, this message will fail because we
lose the virtchnl on reset and HW is going to clean up those resources
regardless in that case. If we're in remove and we get an error here,
we're going to reset the device at the end of remove anyway so not a big
deal. Just remove this message it's not useful.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
While we're here improving virtchnl we can include two minor fixes for
the lower level ctrlq flow.
This adds a memory barrier to idpf_post_rx_buffs before we update tail
on the controlq. We should make sure our writes have had a chance to
finish before we tell HW it can touch them.
This also removes some defensive programming in idpf_ctrlq_recv. The
caller should not be using a num_q_msg value of zero or more than the
ring size and it's their responsibility to call functions sanely.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In idpf_remove we need to tear down the virtchnl core with
idpf_vc_core_deinit so we can free up resources and leave things in a
good state. However, in the case where we failed to establish VC
communications we may not have ever actually successfully initialized
the virtchnl core.
This fixes it by setting a bit once we successfully init the virtchnl
core. Then, in deinit, we'll check for it before going on further,
otherwise we just return. Also clear the bit at the end of deinit so we
know it's gone now.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We can now remove a bunch of gross code we don't need anymore like the
vc state bits and vc_buf_lock since everything is using transaction API
now.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that all the messages are using the transaction API, we can rework
idpf_recv_mb_msg quite a lot to simplify it. Due to this, we remove
idpf_find_vport as no longer used and alter idpf_recv_event_msg
slightly.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There are situations where the driver needs to add a MAC filter but
we're explicitly not allowed to sleep so we can wait for a virtchnl
message to complete.
This adds an async_handler for asynchronously sent messages for MAC
filters so that we can better handle if there's an error of some kind.
If success we don't need to do anything else, but if we failed to
program the new filter we really should remove it from our list of MAC
filters. If we don't remove bad filters, what I expect to happen is
after a reset of some kind we try to program the MAC filter again and it
fails again. This is clearly wrong and I would expect to be confusing
for the user.
It could also be the failure is for a delete MAC filter message but
those filters get deleted regardless. Not much we can do about a delete
failure.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This takes care of RSS/SRIOV/MAC and other misc virtchnl messages. This
again is mostly mechanical.
In absence of an async_handler for MAC filters, this will simply
generically report any errors from idpf_vc_xn_forward_async. This
maintains the existing behavior. Follow up patch will add an async
handler for MAC filters to remove bad filters from our list.
While we're here we can also make the code much nicer by converting some
variables to auto-variables where appropriate. This makes it cleaner and
less prone to memory leaking.
There's still a bit more cleanup we can do here to remove stuff that's
not being used anymore now; follow-up patches will take care of loose
ends.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reworks queue specific virtchnl messages to use the added
transaction API. It is fairly mechanical and generally makes the
functions using it more simple. Functions using transaction API no
longer need to take the vc_buf_lock since it's not using it anymore.
After filling out an idpf_vc_xn_params struct, idpf_vc_xn_exec takes
care of the send and recv handling.
This also converts those functions where appropriate to use
auto-variables instead of manually calling kfree. This greatly
simplifies the memory alloc paths and makes them less prone memory
leaks.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reworks the way vport related virtchnl messages work to take
advantage of the added transaction API. It is fairly mechanical as, to
use the transaction API, the function just needs to fill out an
appropriate idpf_vc_xn_params struct to pass to idpf_vc_xn_exec which
will take care of the actual send and recv.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This starts refactoring how virtchnl messages are handled by adding a
transaction manager (idpf_vc_xn_manager).
There are two primary motivations here which are to enable handling of
multiple messages at once and to make it more robust in general. As it
is right now, the driver may only have one pending message at a time and
there's no guarantee that the response we receive was actually intended
for the message we sent prior.
This works by utilizing a "cookie" field of the message descriptor. It
is arbitrary what data we put in the cookie and the response is required
to have the same cookie the original message was sent with. Then using a
"transaction" abstraction that uses the completion API to pair responses
to the message it belongs to.
The cookie works such that the first half is the index to the
transaction in our array, and the second half is a "salt" that gets
incremented every message. This enables quick lookups into the array and
also ensuring we have the correct message. The salt is necessary because
after, for example, a message times out and we deem the response was
lost for some reason, we could theoretically reuse the same index but
using a different salt ensures that when we do actually get a response
it's not the old message that timed out previously finally coming in.
Since the number of transactions allocated is U8_MAX and the salt is 8
bits, we can never have a conflict because we can't roll over the salt
without using more transactions than we have available.
This starts by only converting the VIRTCHNL2_OP_VERSION message to use
this new transaction API. Follow up patches will convert all virtchnl
messages to use the API.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
idpf.h is quite heavy. We can reduce the burden a fair bit by
introducing an idpf_virtchnl.h file. This mostly just moves function
declarations but there are many of them. This also makes an attempt to
group those declarations in a way that makes some sense instead of
mishmashed.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Matthieu Baerts says:
====================
mptcp: userspace pm: 'dump addrs' and 'get addr'
This series from Geliang adds two new Netlink commands to the userspace
PM:
- one to dump all addresses of a specific MPTCP connection:
- feature added in patches 3 to 5
- test added in patches 7, 8 and 10
- and one to get a specific address for an MPTCP connection:
- feature added in patches 11 to 13
- test added in patches 14 and 15
These new Netlink commands can be useful if an MPTCP daemon lost track
of the different connections, e.g. after having been restarted.
The other patches are some clean-ups and small improvements added
while working on the new features.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
This patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh.
In it, parse the token value from the output of 'pm_nl_ctl events', then
pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm
dump tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl get $id
This patch adds token argument for it to support userspace PM:
pm_nl_ctl get $id token $token
If 'token $token' is passed to get_addr(), copy it into the kernel netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renames mptcp_pm_nl_get_addr_doit() as a dedicated in-kernel
netlink PM get addr function mptcp_pm_nl_get_addr(). and invoke a new
wrapper mptcp_pm_get_addr() in mptcp_pm_nl_get_addr_doit.
If a token is gotten in the wrapper, that means a userspace PM is used.
So invoke mptcp_userspace_pm_get_addr() to get addr in userspace PM list.
Otherwise, invoke mptcp_pm_nl_get_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements mptcp_userspace_pm_get_addr() to get an address
from userspace pm address list according the given 'token' and 'id'.
Use nla_get_u32() to get the u32 value of 'token', then pass it to
mptcp_token_get_sock() to get the msk. Pass 'msk' and 'id' to the helper
mptcp_userspace_pm_lookup_addr_by_id() to get the address entry. Put
this entry to userspace using mptcp_pm_nl_put_entry_info().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corresponding __lookup_addr_by_id() helper in the in-kernel netlink PM,
this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to
lookup the address entry with the given id on the userspace pm local
address list.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new helper userspace_pm_dump() to dump addresses
for the userspace PM. Use this helper to check whether an ID 0 subflow
is listed in the output of dump command after creating an ID 0 subflow
in "userspace pm create id 0 subflow" test. Dump userspace PM addresses
list in "userspace pm add & remove address" test and in "userspace pm
create destroy subflow" test.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.
This helper will be used for userspace dump addresses tests.
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
