IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add device nodes for the DSI1, second DSI interface found on
MSM8996/APQ8096 platforms. For example on db820c it is routed to the
secondary HS expansion connector.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617103652.606250-1-dmitry.baryshkov@linaro.org
This is an SMMU for the adreno gpu, and adding this compatible lets
the driver use per-fd page tables, which are required for security
between GPU clients.
Signed-off-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Move arm,smmu-500 last, per Dmitry's request]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220614230136.3726047-2-emma@anholt.net
A3, A5 and most of the Samsung phones with MSM8916 SoC use GPIO pin 13 for
touchscreen interrupts. Add touchscreen pinctrl to a2015 common dtsi.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220610175332.104154-1-linmengbo0689@protonmail.com
The HDMI driver doesn't use the phy-names to identify the PHY. Different
Qualcomm platforms have used different names for the PHY. So, we are
deprecating phy-names propertty of the HDMI device and dropping them
from existing DTs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220609122350.3157529-15-dmitry.baryshkov@linaro.org
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-13-krzysztof.kozlowski@linaro.org
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-12-krzysztof.kozlowski@linaro.org
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-10-krzysztof.kozlowski@linaro.org
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-9-krzysztof.kozlowski@linaro.org
According to Devicetree specification, the device nodes should be
generic, reflecting the function of the device. The typical name for
memory regions is "sram".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-8-krzysztof.kozlowski@linaro.org
The soc node expects all the nodes to have unit addresses. The
qup-opp-table does not have that which causes warnings:
arch/arm64/boot/dts/qcom/sm8250.dtsi:916.32-933.5:
Warning (simple_bus_reg): /soc@0/qup-opp-table:
missing or empty reg/ranges property
Move the qup-opp-table out of soc node to fix these warnings
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Rebased ontop of Krzysztof's node name update]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606065035.553533-4-vkoul@kernel.org
The soc node expects all the nodes to have unit addresses. The
qup-opp-tables do not have that which causes warnings:
arch/arm64/boot/dts/qcom/sm8350.dtsi:640.46-657.5:
Warning (simple_bus_reg): /soc@0/qup-100mhz-opp-table:
missing or empty reg/ranges property
arch/arm64/boot/dts/qcom/sm8350.dtsi:659.46-676.5:
Warning (simple_bus_reg): /soc@0/qup-120mhz-opp-table:
missing or empty reg/ranges property
Move the qup-opp-tables out of soc node to fix these warnings
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Rebased ontop of Krzysztof's node name update]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606065035.553533-3-vkoul@kernel.org
clk-virt and mc-virt interconnect nodes were named interconnect@0 and
interconnect@1. That is incorrect as we don't have unit addresses 0/1
for these node.
This causes warning:
arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4:
Warning (unit_address_vs_reg): /interconnect@0:
node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/qcom/sm8450.dtsi:261.26-265.4:
Warning (unit_address_vs_reg): /interconnect@1:
node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4:
Warning (unique_unit_address_if_enabled): /interconnect@0:
duplicate unit-address (also used in node /soc@0)
Rename the nodes to interconnect-0 and interconnect-1 to fix the
warning.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606065035.553533-2-vkoul@kernel.org
Add the device tree for Xiaomi Mi 5s Plus (natrium).
Signed-off-by: Alec Su <ae40515@yahoo.com.tw>
Reviewed-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606024706.22861-3-ae40515@yahoo.com.tw
Current QUP peripheral labels like spi_0 and i2c_0 dont really tell what is
the exact QUP HW being used as there are actually 6 identical QUP HW blocks
for UART, SPI and I2C.
For example current i2c_0 label actually points to the QUP2 I2C HW.
This style of labeling does not follow what the rest of Qualcomm SoC-s use,
for example IPQ8074 which has the identical QUP blocks.
It also makes it really hard to add the missing QUP DT nodes as there are
multiple missing.
So utilize the same style as other Qualcomm SoC-s are using and update the
CP01 DTS as its the current sole user of them.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220604153003.55172-1-robimarko@gmail.com
The use of these constants was removed during merging, probably because
the patches adding those defines and the dts patches were merged through
different trees.
Re-add them to make it clear which clocks are getting used.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220603094710.64591-2-luca.weiss@fairphone.com
Make it easier to understand what the reg in those nodes is by using the
constants provided by qcom,q6dsp-lpass-ports.h.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220603094710.64591-1-luca.weiss@fairphone.com
The watchdog IRQ trigger type should be EDGE_RISING. So fix all remoteproc
nodes.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220530080842.37024-3-manivannan.sadhasivam@linaro.org
The smem-state properties for the pronto node were incorrectly labelled,
reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
the stop state to be used.
Fixes: 88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526141740.15834-3-sireeshkodali1@gmail.com
This patch adds device tree support for the VL53L0X ToF sensor
found on all Yoshino devices.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220523175344.5845-6-markuss.broks@gmail.com
Add interconnects that are required to be proxy voted upon during modem
bootup on SC7280 SoCs.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1652978825-5304-2-git-send-email-quic_sibis@quicinc.com
Specifying interrupts and interrupts-extended is not correct. Keep only
the extended ones, routed towards IPCC mailbox to fix warnings like:
sm8450-qrd.dtb: glink-edge: More than one condition true in oneOf schema:
{'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml',
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-13-krzysztof.kozlowski@linaro.org
Specifying interrupts and interrupts-extended is not correct. Keep only
the extended ones, routed towards IPCC mailbox to fix warnings like:
sm8350-sony-xperia-sagami-pdx214.dtb: glink-edge: More than one condition true in oneOf schema:
{'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml',
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-12-krzysztof.kozlowski@linaro.org
glink-edge node does not have children with unit addresses:
sdm630-sony-xperia-ganges-kirin.dtb: glink-edge: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-11-krzysztof.kozlowski@linaro.org
As Bjorn noted in [1], since the qmp phy driver doesn't
use the 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties
currently, let's remove them from the dts files as well.
Otherwise, it leads to the following '$ make dtbs_check'
warning(s):
sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+
If later on the driver support is added, we can add these properties
back to the dts files.
[1]. https://lore.kernel.org/linux-arm-msm/YmQhpsmiYJzR99LK@ripper/
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220516063155.1332683-5-bhupesh.sharma@linaro.org
Add USB power domains provided by GCC GDSCs.
Add the required #power-domain-cells to the GCC as well.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-11-robimarko@gmail.com
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports a number of issues with
ordering of 'reg-names' as various possible combinations
are possible for different qcom SoC dts files.
Fix the same by updating the offending 'dts' files.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-6-bhupesh.sharma@linaro.org
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports a number of issues with
ordering of 'clocks' & 'clock-names' for sdhci nodes:
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
clock-names:0: 'iface' was expected
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
clock-names:1: 'core' was expected
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
clock-names:2: 'xo' was expected
Fix the same by updating the offending 'dts' files.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-5-bhupesh.sharma@linaro.org
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports issues with
inconsistent 'interconnect-names' used for sdhci nodes.
Fix the same.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-3-bhupesh.sharma@linaro.org
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports issues with
inconsistent 'sdhci@' convention used for specifying the
sdhci nodes. The generic mmc bindings expect 'mmc@' format
instead.
Fix the same.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[bjorn: Moved non-arm64 changes to separate commit]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-2-bhupesh.sharma@linaro.org
The entire Sony Nile and Ganges lineup utilize the first three channels
(the triled channels) of the LPG block for an RGB (battery) status and
notification indicator.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[bjorn: Dropped #address/#size-cells]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511190718.764445-4-marijn.suijten@somainline.org
The Light Pulse Generator describes a hardware block responsible for
displaying colors and patterns on an RGB LED (usually used for [battery]
status and notifications), and drive PWM signals for general-purpose
(ie. backlight) LEDs. The availability and usage of the individual
channels differ per board and is hence left for individual platform DTs
to configure.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[bjorn: Dropped #address/size-cells]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511190718.764445-3-marijn.suijten@somainline.org
The current settings refer to "blsp_spi1" function which isn't defined.
For this reason an attempt to enable blsp1_spi1 interface results in
the probe failure below:
[ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22
Fix this by making the functions used in qcs404.dtsi to match the contents
of drivers/pinctrl/qcom/pinctrl-qcs404.c.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220611195713.131597-1-andrey.konovalov@linaro.org
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526204248.832139-1-krzysztof.kozlowski@linaro.org
