IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
max_low_pfn and min_low_pfn are declared in linux/memblock.h,
and it also is included in arch/riscv/mm/init.c, drop unnecessary
declaration.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The nommu_k210_defconfig default configuration allows booting a Canaan
Kendryte K210 SoC based boards using an embedded intramfs cpio file.
Modifying this configuration to enable support for the board SD card is
not trivial for all users. To help beginners getting started with these
boards, add the nommu_k210_sdcard_defconfig default configuration file
to set all configuration options necessary to use the board mmc-spi sd
card for the root file system.
This new configuration adds support for the block layer, the mmc-spi
driver and modifies the boot options to specify the rootfs device as
mmcblk0p1 (first partition of the sd card block device). The ext2 file
system is selected by default to encourage its use as that results in
only about 4KB added to the kernel image size. As ext2 does not have
journaling, the boot options specify a read-only mount of the file
system. Similarly to the smaller nommu_k210_defconfig, this new default
configuration disables virtual terminal support to reduce the kernel
image size.
The default device tree selected is unchanged, specifying the simple
"k210_generic" device tree file. The user must change this setting to
specify the device tree suitable for the board being used
(sipeed_maix_bit, sipeed_maix_dock, sipeed_maix_go, sipeed_maixduino or
canaan_kd233).
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Update the Kendryte k210 nommu default configuration file
(nommu_k210_defconfig) to include device drivers for reset, reboot,
I2C, SPI, gpio and LEDs support. Virtual Terminal support is also
disabled as no terminal devices are supported and enabled. Disabling
CONFIG_VT (removing the no longer needed override for
CONFIG_VGA_CONSOLE) reduces the kernel image size by about 65 KB.
This default configuration remains suitable for a system using an
initramfs cpio file linked into the kernel image.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the device tree canaan_kd233.dts for the Canaan Kendryte KD233
development board. This device tree enables LEDs, some gpios and
spi/mmc SD card device. The WS2812B RGB LED and the 10 positions rotary
dip switch present on the board are left undefined.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: Remove undocumented microphone entry, along with the use.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the device tree sipeed_maixduino.dts for the SiPeed MAIXDUINO board.
This device tree enables LEDs and spi/mmc SD card device. Additionally,
gpios and i2c are also enabled and mapped to the board header pins as
indicated on the board itself.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[Palmer: Remove undocumented microphone entry, along with the use.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the device tree sipeed_maix_go.dts for the SiPeed MAIX GO board.
This device tree enables buttons, LEDs, gpio, i2c and spi/mmc SD card
devices.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[Palmer: Remove undocumented microphone entry, along with the use.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the device tree sipeed_maix_dock.dts for the SiPeed MAIX DOCK m1
and m1w boards. This device tree enables LEDs, gpio, i2c and spi/mmc
SD card devices.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[Palmer: Remove undocumented microphone entry, along with the use.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the device tree sipeed_maix_bit.dts for the SiPeed MAIX BiT and
MAIX BiTm boards. This device tree enables LEDs, gpio, i2c and spi/mmc
SD card devices.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[Palmer: Remove undocumented microphone entry, along with the use.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Update the Canaan Kendryte K210 base device tree k210.dtsi to define
all supported peripherals of the SoC, their clocks and reset lines.
The device tree file k210.dts is renamed to k210_generic.dts and
becomes the default value selection of the configuration option
SOC_CANAAN_K210_DTB_BUILTIN_SOURCE. No device beside the serial console
is defined by this device tree. This makes this generic device tree
suitable for use with a builtin initramfs with all known K210 based
boards.
These changes result in the K210_CLK_ACLK clock ID to be unused and
removed from the dt-bindings k210-clk.h header file.
Most updates to the k210.dtsi file come from Sean Anderson's work on
U-Boot support for the K210.
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
SBI v0.2 functions can return an error code from SBI implementation.
We are already processing the SBI error code and coverts it to the Linux
error code.
Propagate to the error code to the caller as well. As of now, kvm is the
only user of these error codes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the
sense that we don't assign ->set_child_tid with our own structure. Just
ensure that every arch sets up the PF_IO_WORKER threads like kthreads
in the arch implementation of copy_thread().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking updates from David Miller:
"Here is what we have this merge window:
1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik.
2) Add RSS multi group support to octeontx2-pf driver, from Geetha
Sowjanya.
3) Add support for KS8851 PHY. From Marek Vasut.
4) Add support for GarfieldPeak bluetooth controller from Kiran K.
5) Add support for half-duplex tcan4x5x can controllers.
6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw
Liew.
7) Rework RX port offload infrastructure, particularly wrt, UDP
tunneling, from Jakub Kicinski.
8) Add BCM72116 PHY support, from Florian Fainelli.
9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir
Oltean.
10) Add support for picosecond rx delay in dwmac-meson8b chips. From
Martin Blumenstingl.
11) Support TSO on xfrm interfaces from Eyal Birger.
12) Add support for MP_PRIO to mptcp stack, from Geliang Tang.
13) Support BCM4908 integrated switch, from Rafał Miłecki.
14) Support for directly accessing kernel module variables via module
BTF info, from Andrii Naryiko.
15) Add DASH (esktop and mobile Architecture for System Hardware)
support to r8169 driver, from Heiner Kallweit.
16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron.
17) Add support for 100 base0x SFP devices, from Bjarni Jonasson.
18) Support link aggregation in DSA, from Tobias Waldekranz.
19) Support for bitwidse atomics in bpf, from Brendan Jackman.
20) SmartEEE support in at803x driver, from Russell King.
21) Add support for flow based tunneling to GTP, from Pravin B Shelar.
22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder.
23) TLS RX offload for bonding, from Tariq Toukan.
24) RX decap offklload support in mac80211, from Felix Fietkou.
25) devlink health saupport in octeontx2-af, from George Cherian.
26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung
27) Delegated actionss support in mptcp, from Paolo Abeni.
28) Support receive timestamping when doin zerocopy tcp receive. From
Arjun Ray.
29) HTB offload support for mlx5, from Maxim Mikityanskiy.
30) UDP GRO forwarding, from Maxim Mikityanskiy.
31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach.
32) Weighted random twos choice algorithm for ipvs, from Darby Payne.
33) Fix netdev registration deadlock, from Johannes Berg.
34) Various conversions to new tasklet api, from EmilRenner Berthing.
35) Bulk skb allocations in veth, from Lorenzo Bianconi.
36) New ethtool interface for lane setting, from Danielle Ratson.
37) Offload failiure notifications for routes, from Amit Cohen.
38) BCM4908 support, from Rafał Miłecki.
39) Support several new iwlwifi chips, from Ihab Zhaika.
40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski.
41) Support for mhi prrotocols, from Loic Poulain.
42) Optimize bpf program stats.
43) Implement RFC6056, for better port randomization, from Eric
Dumazet.
44) hsr tag offloading support from George McCollister.
45) Netpoll support in qede, from Bhaskar Upadhaya.
46) 2005/400g speed support in bonding 3ad mode, from Nikolay
Aleksandrov.
47) Netlink event support in mptcp, from Florian Westphal.
48) Better skbuff caching, from Alexander Lobakin.
49) MRP (Media Redundancy Protocol) offloading in DSA and a few
drivers, from Horatiu Vultur.
50) mqprio saupport in mvneta, from Maxime Chevallier.
51) Remove of_phy_attach, no longer needed, from Florian Fainelli"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits)
octeontx2-pf: Fix otx2_get_fecparam()
cteontx2-pf: cn10k: Prevent harmless double shift bugs
net: stmmac: Add PCI bus info to ethtool driver query output
ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary
ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.
ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.
ptp: ptp_clockmatrix: Clean-up dev_*() messages.
ptp: ptp_clockmatrix: Remove unused header declarations.
ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.
ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.
net: stmmac: dwmac-sun8i: Add a shutdown callback
net: stmmac: dwmac-sun8i: Minor probe function cleanup
net: stmmac: dwmac-sun8i: Use reset_control_reset
net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check
net: stmmac: dwmac-sun8i: Return void from PHY unpower
r8169: use macro pm_ptr
net: mdio: Remove of_phy_attach()
net: mscc: ocelot: select PACKING in the Kconfig
net: re-solve some conflicts after net -> net-next merge
net: dsa: tag_rtl4_a: Support also egress tags
...
Currently, we do local TLB flush on every MM switch. This is very harsh on
performance because we are forcing page table walks after every MM switch.
This patch implements ASID allocator for assigning an ASID to a MM context.
The number of ASIDs are limited in HW so we create a logical entity named
CONTEXTID for assigning to MM context. The lower bits of CONTEXTID are ASID
and upper bits are VERSION number. The number of usable ASID bits supported
by HW are detected at boot-time by writing 1s to ASID bits in SATP CSR.
We allocate new CONTEXTID on first MM switch for a MM context where the
ASID is allocated from an ASID bitmap and VERSION is provide by an atomic
counter. At time of allocating new CONTEXTID, if we run out of available
ASIDs then:
1. We flush the ASID bitmap
2. Increment current VERSION atomic counter
3. Re-allocate ASID from ASID bitmap
4. Flush TLB on all CPUs
5. Try CONTEXTID re-assignment on all CPUs
Please note that we don't use ASID #0 because it is used at boot-time by
all CPUs for initial MM context. Also, newly created context is always
assigned CONTEXTID #0 (i.e. VERSION #0 and ASID #0) which is an invalid
context in our implementation.
Using above approach, we have virtually infinite CONTEXTIDs on-top-of
limited number of HW ASIDs. This approach is inspired from ASID allocator
used for Linux ARM/ARM64 but we have adapted it for RISC-V. Overall, this
ASID allocator helps us reduce rate of local TLB flushes on every CPU
thereby increasing performance.
This patch is tested on QEMU virt machine, Spike and SiFive Unleashed
board. On QEMU virt machine, we see some (3-5% approx) performance
improvement with SW emulated TLBs provided by QEMU. Unfortunately,
the ASID bits of the SATP CSR are not implemented on Spike and SiFive
Unleashed board so we don't see any change in performance. On real HW
having all ASID bits implemented, the performance gains will be much
more due improved sharing of TLB among different processes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Remove a superfluous semicolon after function definition.
Signed-off-by: Chengyang Fan <cy.fan@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Neither of these are actually correct: the instruction stream is defined
(for versions of the ISA manual newer than 2.2) as a stream of 16-bit
little-endian parcels, which is different than just being little-endian.
In theory we should represent this as a type, but we don't have any
concrete plans for the big endian stuff so it doesn't seem worth the
time -- we've got variants of this all over the place.
Instead I'm just dropping the unnecessary type conversion, which is a
NOP on LE systems but causes an sparse error as the types are all mixed
up.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the pinctrl-k210.c pinctrl driver for the Canaan Kendryte K210
field programmable IO array (FPIOA) to allow configuring the SoC pin
functions. The K210 has 48 programmable pins which can take any of 256
possible functions.
This patch is inspired from the k210 pinctrl driver for the u-boot
project and contains many direct contributions from Sean Anderson.
The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210
SOC FPIOA DRIVER" with myself listed as maintainer for this driver.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
It references to x86/s390 architecture.
So, it doesn't map the early shadow page to cover VMALLOC space.
Prepopulate top level page table for the range that would otherwise be
empty.
lower levels are filled dynamically upon memory allocation while
booting.
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Covert to the generic reserve_initrd_mem() function.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Sometimes, especially in a production system we may not want to
use a "smart bootloader" like u-boot to load kernel, ramdisk and
device tree from a filesystem on eMMC, but rather load the kernel
from a NAND partition and just run it as soon as we can, and in
this case it is convenient to have device tree compiled into the
kernel binary. Since this case is not limited to MMU-less systems,
let's support it for these which have MMU enabled too.
While at it, provide __dtb_start as a parameter to setup_vm() in
BUILTIN_DTB case, so we don't have to duplicate BUILTIN_DTB specific
processing in MMU-enabled and MMU-disabled versions of setup_vm().
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
VSC8541 phys need a special reset sequence, which the driver doesn't
currentlny support. As a result enabling the reset via GPIO essentially
guarnteees that the device won't work correctly. We've been relying on
bootloaders to reset the device for years, with this revert we'll go
back to doing so until we can sort out how to get the reset sequence
into the kernel.
This reverts commit a0fa9d7270.
Fixes: a0fa9d7270 ("dts: phy: add GPIO number and active state used for phy reset")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
MAXPHYSMEM_1GB option was added for RV32 because RV32 only supports 1GB
of maximum physical memory. This lead to few compilation errors reported
by kernel test robot which created the following configuration combination
which are not useful but can be configured.
1. MAXPHYSMEM_1GB & RV64
2, MAXPHYSMEM_2GB & RV32
Fix this by restricting MAXPHYSMEM_1GB for RV32 and MAXPHYSMEM_2GB only for
RV64.
Fixes: e557793799 ("RISC-V: Fix maximum allowed phsyical memory for RV32")
Cc: stable@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Allows the sections to be aligned on smaller boundaries and
therefore results in a smaller kernel image size.
Signed-off-by: Sebastien Van Cauwenberghe <svancau@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
.init section permission should only updated to non-execute if
STRICT_KERNEL_RWX is enabled. Otherwise, this will lead to a kernel hang.
Fixes: 19a0086902 ("RISC-V: Protect all kernel sections including init early")
Cc: stable@vger.kernel.org
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
virt_addr_valid macro checks that a virtual address is valid, ie that
the address belongs to the linear mapping and that the corresponding
physical page exists.
Add the missing check that ensures the virtual address belongs to the
linear mapping, otherwise __virt_to_phys, when compiled with
CONFIG_DEBUG_VIRTUAL enabled, raises a WARN that is interpreted as a
kernel bug by syzbot.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The max_mapnr is the number of PFNs, not absolute PFN offset.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Fixes: d0d8aae645 ("RISC-V: Set maximum number of mapped pages correctly")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Conflicts:
drivers/net/can/dev.c
commit 03f16c5075 ("can: dev: can_restart: fix use after free bug")
commit 3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
Code move.
drivers/net/dsa/b53/b53_common.c
commit 8e4052c32d ("net: dsa: b53: fix an off by one in checking "vlan->vid"")
commit b7a9e0da2d ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects")
Field rename.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linux kernel can only map 1GB of address space for RV32 as the page offset
is set to 0xC0000000. The current description in the Kconfig is confusing
as it indicates that RV32 can support 2GB of physical memory. That is
simply not true for current kernel. In future, a 2GB split support can be
added to allow 2GB physical address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, linux kernel can not use last 4k bytes of addressable space
because IS_ERR_VALUE macro treats those as an error. This will be an issue
for RV32 as any memblock allocator potentially allocate chunk of memory
from the end of DRAM (2GB) leading bad address error even though the
address was technically valid.
Fix this issue by limiting the memblock if available memory spans the
entire address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
Using global sp_in_global directly to fix the following warning,
arch/riscv/kernel/stacktrace.c:31:3: warning: ‘register’ is not at beginning of declaration [-Wold-style-declaration]
31 | const register unsigned long current_sp = sp_in_global;
| ^~~~~
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When a function doesn't have a callee, then it will not
push ra into the stack, such as lkdtm_BUG() function,
addi sp,sp,-16
sd s0,8(sp)
addi s0,sp,16
ebreak
The struct stackframe use {fp,ra} to get information from
stack, if walk_stackframe() with pr_regs, we will obtain
wrong value and bad stacktrace,
[<ffffffe00066c56c>] lkdtm_BUG+0x6/0x8
---[ end trace 18da3fbdf08e25d5 ]---
Correct the next fp and pc, after that, full stacktrace
shown as expects,
[<ffffffe00066c56c>] lkdtm_BUG+0x6/0x8
[<ffffffe0008b24a4>] lkdtm_do_action+0x14/0x1c
[<ffffffe00066c372>] direct_entry+0xc0/0x10a
[<ffffffe000439f86>] full_proxy_write+0x42/0x6a
[<ffffffe000309626>] vfs_write+0x7e/0x214
[<ffffffe00030992a>] ksys_write+0x98/0xc0
[<ffffffe000309960>] sys_write+0xe/0x16
[<ffffffe0002014bc>] ret_from_syscall+0x0/0x2
---[ end trace 61917f3d9a9fadcd ]---
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Show the function symbols of epc and ra to improve the
readability of crash reports, and align the printing
formats about the raw epc value.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Like commit 1149aad10b ("arm64: Add dump_backtrace() in show_regs"),
dump the stack in riscv show_regs as common code expects.
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This enables the use of per-task stack canary values if GCC has
support for emitting the stack canary reference relative to the
value of tp, which holds the task struct pointer in the riscv
kernel.
After compare arm64 and x86 implementations, seems arm64's is more
flexible and readable. The key point is how gcc get the offset of
stack_canary from gs/el0_sp.
x86: Use a fix offset from gs, not flexible.
struct fixed_percpu_data {
/*
* GCC hardcodes the stack canary as %gs:40. Since the
* irq_stack is the object at %gs:0, we reserve the bottom
* 48 bytes of the irq stack for the canary.
*/
char gs_base[40]; // :(
unsigned long stack_canary;
};
arm64: Use -mstack-protector-guard-offset & guard-reg
gcc options:
-mstack-protector-guard=sysreg
-mstack-protector-guard-reg=sp_el0
-mstack-protector-guard-offset=xxx
riscv: Use -mstack-protector-guard-offset & guard-reg
gcc options:
-mstack-protector-guard=tls
-mstack-protector-guard-reg=tp
-mstack-protector-guard-offset=xxx
GCC's implementation has been merged:
commit c931e8d5a96463427040b0d11f9c4352ac22b2b0
Author: Cooper Qu <cooper.qu@linux.alibaba.com>
Date: Mon Jul 13 16:15:08 2020 +0800
RISC-V: Add support for TLS stack protector canary access
In the end, these codes are inserted by gcc before return:
* 0xffffffe00020b396 <+120>: ld a5,1008(tp) # 0x3f0
* 0xffffffe00020b39a <+124>: xor a5,a5,a4
* 0xffffffe00020b39c <+126>: mv a0,s5
* 0xffffffe00020b39e <+128>: bnez a5,0xffffffe00020b61c <_do_fork+766>
0xffffffe00020b3a2 <+132>: ld ra,136(sp)
0xffffffe00020b3a4 <+134>: ld s0,128(sp)
0xffffffe00020b3a6 <+136>: ld s1,120(sp)
0xffffffe00020b3a8 <+138>: ld s2,112(sp)
0xffffffe00020b3aa <+140>: ld s3,104(sp)
0xffffffe00020b3ac <+142>: ld s4,96(sp)
0xffffffe00020b3ae <+144>: ld s5,88(sp)
0xffffffe00020b3b0 <+146>: ld s6,80(sp)
0xffffffe00020b3b2 <+148>: ld s7,72(sp)
0xffffffe00020b3b4 <+150>: addi sp,sp,144
0xffffffe00020b3b6 <+152>: ret
...
* 0xffffffe00020b61c <+766>: auipc ra,0x7f8
* 0xffffffe00020b620 <+770>: jalr -1764(ra) # 0xffffffe000a02f38 <__stack_chk_fail>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Cooper Qu <cooper.qu@linux.alibaba.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Inspired by the commit 42d038c4fb ("arm64: Add support for function
error injection"), this patch supports function error injection for
riscv.
This patch mainly support two functions: one is regs_set_return_value()
which is used to overwrite the return value; the another function is
override_function_with_return() which is to override the probed
function returning and jump to its caller.
Test log:
cd /sys/kernel/debug/fail_function
echo sys_clone > inject
echo 100 > probability
echo 1 > interval
ls /
[ 313.176875] FAULT_INJECTION: forcing a failure.
[ 313.176875] name fail_function, interval 1, probability 100, space 0, times 1
[ 313.184357] CPU: 0 PID: 87 Comm: sh Not tainted 5.8.0-rc5-00007-g6a758cc #117
[ 313.187616] Call Trace:
[ 313.189100] [<ffffffe0002036b6>] walk_stackframe+0x0/0xc2
[ 313.191626] [<ffffffe00020395c>] show_stack+0x40/0x4c
[ 313.193927] [<ffffffe000556c60>] dump_stack+0x7c/0x96
[ 313.194795] [<ffffffe0005522e8>] should_fail+0x140/0x142
[ 313.195923] [<ffffffe000299ffc>] fei_kprobe_handler+0x2c/0x5a
[ 313.197687] [<ffffffe0009e2ec4>] kprobe_breakpoint_handler+0xb4/0x18a
[ 313.200054] [<ffffffe00020357e>] do_trap_break+0x36/0xca
[ 313.202147] [<ffffffe000201bca>] ret_from_exception+0x0/0xc
[ 313.204556] [<ffffffe000201bbc>] ret_from_syscall+0x0/0x2
-sh: can't fork: Invalid argument
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch adds support for uprobes on riscv architecture.
Just like kprobe, it support single-step and simulate instructions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch enables "kprobe & kretprobe" to work with ftrace
interface. It utilized software breakpoint as single-step
mechanism.
Some instructions which can't be single-step executed must be
simulated in kernel execution slot, such as: branch, jal, auipc,
la ...
Some instructions should be rejected for probing and we use a
blacklist to filter, such as: ecall, ebreak, ...
We use ebreak & c.ebreak to replace origin instruction and the
kprobe handler prepares an executable memory slot for out-of-line
execution with a copy of the original instruction being probed.
In execution slot we add ebreak behind original instruction to
simulate a single-setp mechanism.
The patch is based on packi's work [1] and csky's work [2].
- The kprobes_trampoline.S is all from packi's patch
- The single-step mechanism is new designed for riscv without hw
single-step trap
- The simulation codes are from csky
- Frankly, all codes refer to other archs' implementation
[1] https://lore.kernel.org/linux-riscv/20181113195804.22825-1-me@packi.ch/
[2] https://lore.kernel.org/linux-csky/20200403044150.20562-9-guoren@kernel.org/
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Patrick Stählin <me@packi.ch>
Signed-off-by: Patrick Stählin <me@packi.ch>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Patrick Stählin <me@packi.ch>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch changes the current detour mechanism of dynamic ftrace
which has been discussed during LPC 2020 RISCV-MC [1].
Before the patch, we used mcount for detour:
<funca>:
addi sp,sp,-16
sd ra,8(sp)
sd s0,0(sp)
addi s0,sp,16
mv a5,ra
mv a0,a5
auipc ra,0x0 -> nop
jalr -296(ra) <_mcount@plt> ->nop
...
After the patch, we use nop call site area for detour:
<funca>:
nop -> REG_S ra, -SZREG(sp)
nop -> auipc ra, 0x?
nop -> jalr ?(ra)
nop -> REG_L ra, -SZREG(sp)
...
The mcount mechanism is mixed with gcc function prologue which is
not very clear. The patchable function entry just put 16 bytes nop
before the front of the function prologue which could be filled
with a separated detour mechanism.
[1] https://www.linuxplumbersconf.org/event/7/contributions/807/
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We must use $(CC_FLAGS_FTRACE) instead of directly using -pg. It
will cause -fpatchable-function-entry error.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Unfortunately, the current code couldn't be compiled:
CC arch/riscv/kernel/patch.o
In file included from ./include/linux/kernel.h:11,
from ./include/linux/list.h:9,
from ./include/linux/preempt.h:11,
from ./include/linux/spinlock.h:51,
from arch/riscv/kernel/patch.c:6:
In function ‘fix_to_virt’,
inlined from ‘patch_map’ at arch/riscv/kernel/patch.c:37:17:
./include/linux/compiler.h:392:38: error: call to ‘__compiletime_assert_205’ declared with attribute error: BUILD_BUG_ON failed: idx >= __end_of_fixed_addresses
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
./include/linux/compiler.h:373:4: note: in definition of macro ‘__compiletime_assert’
prefix ## suffix(); \
^~~~~~
./include/linux/compiler.h:392:2: note: in expansion of macro ‘_compiletime_assert’
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
^~~~~~~~~~~~~~~~
./include/asm-generic/fixmap.h:32:2: note: in expansion of macro ‘BUILD_BUG_ON’
BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
^~~~~~~~~~~~
Because fix_to_virt(, idx) needs a const value, not a dynamic variable of
reg-a0 or BUILD_BUG_ON failed with "idx >= __end_of_fixed_addresses".
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the machine name to kernel boot-up log, and install
the machine name to stack dump for DT boot mode.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Use the generic numa implementation to add NUMA support for RISC-V.
This is based on Greentime's patch[1] but modified to use generic NUMA
implementation and few more fixes.
[1] https://lkml.org/lkml/2020/1/10/233
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
These two functions are used to distinguish between PROT_NONENUMA
protections and hinting fault protections.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, we perform some memory init functions in paging init. But,
that will be an issue for NUMA support where DT needs to be flattened
before numa initialization and memblock_present can only be called
after numa initialization.
Move memory initialization related functions to a separate function.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add a reset controller driver for the Canaan Kendryte K210 SoC. This
driver relies on its syscon compatible parent node (sysctl) for its
register mapping. Default this driver compilation to y when the
SOC_CANAAN option is selected.
The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210
SOC RESET CONTROLLER DRIVER" with myself listed as maintainer for this
driver.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Remove the clocks property from the cpu and clint nodes as these are
ignored. Also remove the clock-frequency property from the cpu nodes as
riscv relies on the timebase-frequency property.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Rename configuration options and directories related to the Kendryte
K210 SoC to use the SoC vendor name (canaan) instead of the "kendryte"
branding name.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Ethernet phy VSC8541-01 on HiFive Unleashed has its reset line
connected to a gpio, so enable GPIO driver's required to reset
the phy.
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The GEMGXL_RST line on HiFive Unleashed is pulled low and is
using GPIO number 12. Add these reset-gpio details to dt-node
using which the linux phylib can reset the phy.
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
HiFive unleashed A00 board has VSC8541-01 ethernet phy, this device is
identified as a Revision B device as described in device identification
registers. In order to use this phy in the unmanaged mode, it requires
a specific reset sequence of logical 0-1-0-1 transition on the NRESET pin
as documented here [1].
Currently, the bootloader (fsbl or u-boot-spl) takes care of the phy reset.
If due to some reason the phy device hasn't received the reset by the prior
stages before the linux macb driver comes into the picture, the MACB mii
bus gets probed but the mdio scan fails and is not even able to read the
phy ID registers. It gives an error message:
"libphy: MACB_mii_bus: probed
mdio_bus 10090000.ethernet-ffffffff: MDIO device at address 0 is missing."
Thus adding the device OUI (Organizationally Unique Identifier) to the phy
device node helps to probe the phy device.
[1]: VSC8541-01 datasheet:
https://www.mouser.com/ds/2/523/Microsemi_VSC8541-01_Datasheet_10496_V40-1148034.pdf
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Use virtual address instead of physical address when translating
the address to shadow memory by kasan_mem_to_shadow().
Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Fixes: b10d6bca87 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The patch fix commit: ad5d112 ("riscv: use vDSO common flow to
reduce the latency of the time-related functions").
The GENERIC_TIME_VSYSCALL should be CONFIG_GENERIC_TIME_VSYSCALL
or vgettimeofday won't work.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Fixes: ad5d1122b8 ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
All SiPeed K210 MAIX boards have the exact same vendor, arch and
implementation IDs, preventing differentiation to select the correct
device tree to use through the SOC_BUILTIN_DTB_DECLARE() macro. This
result in this macro to be useless and mandates changing the code of
the sysctl driver to change the builtin device tree suitable for the
target board.
Fix this problem by removing the SOC_BUILTIN_DTB_DECLARE() macro since
it is used only for the K210 support. The code searching the builtin
DTBs using the vendor, arch an implementation IDs is also removed.
Support for builtin DTB falls back to the simpler and more traditional
handling of builtin DTB using the CONFIG_BUILTIN_DTB option, similarly
to other architectures.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When running is M-Mode (no MMU config), MPIE does not get set. This
results in all syscalls being executed with interrupts disabled as
handle_exception never sets SR_IE as it always sees SR_PIE being
cleared. Fix this by always force enabling interrupts in
handle_syscall when CONFIG_RISCV_M_MODE is enabled.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
If of_clk_init() is not called in time_init(), clock providers defined
in the system device tree are not initialized, resulting in failures for
other devices to initialize due to missing clocks.
Similarly to other architectures and to the default kernel time_init()
implementation, call of_clk_init() before executing timer_probe() in
time_init().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Properly return -ENOSYS for syscall -1 instead of leaving the return value
uninitialized. This fixes the strace teststuite.
Fixes: 5340627e3f ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add initial support for the SiFive FU540-C000 SoC. FU740-C000 is built
around the SiFIve U7 Core Complex and a TileLink interconnect.
This file is expected to grow as more device drivers are added to the
kernel.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We found this issue in an legacy out-of-tree kernel module
which didn't properly access user space pointer by get/put_user().
Such an illegal access loops in the page fault handler.
To resolve this, let it die here.
Signed-off-by: Eric Lin <tesheng@andestech.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Like arm64, this patch adds a die_kernel_fault() helper
to ensure the same semantics for the different kernel faults.
Signed-off-by: Eric Lin <tesheng@andestech.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Fix sbi_init() function declaration mismatch between RISCV_SBI
enable and disable, as it always returned 0, make it void function.
Drop some stubs which won't be used if RISCV_SBI disabled.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and
remove all arch/*/include/asm/local64.h arch-specific files since they
only #include <asm-generic/local64.h>.
This fixes build errors on arch/c6x/ and arch/nios2/ for
block/blk-iocost.c.
Build-tested on 21 of 25 arch-es. (tools problems on the others)
Yes, we could even rename <asm-generic/local64.h> to
<linux/local64.h> and change all #includes to use
<linux/local64.h> instead.
Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* A fix that avoids trying to initialize memory regions outside the
usable range.
-----BEGIN PGP SIGNATURE-----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=CoZ3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt
"Avoid trying to initialize memory regions outside the usable range"
* tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix usage of memblock_enforce_memory_limit
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
+ followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl/kWCMACgkQEsHwGGHe
VUqVlxAAg3jSS5w5fuaXON2xYZmgKdlRB0fjbklo1ZrWS6sEHrP+gmVmrJSWGZP+
qFleQ6AxaYK57UiBXxS6Xfn7hHRToqdOAGnaSYzIg1aQIofRoLxvm3YHBMKllb+g
x73IBS/Hu9/kiH8EVDrJSkBpVdbPwDnw+FeW4ZWUMF9GVmV8oA6Zx23BVSVsbFda
jat/cEsJQS3GfECJ/Fg5ae+c/2zn5NgbaVtLxVnMnJfAwEpoPz3ogKoANSskdZg3
z6pA1aMFoHr+lnlzcsM5zdboQlwZRKPHvFpsXPexESBy5dPkYhxFnHqgK4hSZglC
c3QoO9Gn+KOJl4KAKJWNzCrd3G9kKY5RXkoei4bH9wGMjW2c68WrbFyXgNsO3vYR
v5CKpq3+jlwGo03GiLJgWQFdgqX0EgTVHHPTcwFpt8qAMi9/JIPSIeTE41p2+AjZ
cW5F0IlikaR+N8vxc2TDvQTuSsroMiLcocvRWR61oV/48pFlEjqiUjV31myDsASg
gGkOxZOOz2iBJfK8lCrKp5p9JwGp0M0/GSHTxlYQFy+p4SrcOiPX4wYYdLsWxioK
AbVhvOClgB3kN7y7TpLvdjND00ciy4nKEC0QZ5p5G59jSLnpSBM/g6av24LsSQwo
S1HJKhQPbzcI1lhaPjo91HQoOOMZHWLes0SqK4FGNIH+0imHliA=
=n7Gc
-----END PGP SIGNATURE-----
Merge tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
memblock_enforce_memory_limit accepts the maximum memory size not the
maximum address that can be handled by kernel. Fix the function invocation
accordingly.
Fixes: 1bd14a66ee ("RISC-V: Remove any memblock representing unusable memory area")
Cc: stable@vger.kernel.org
Reported-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
ability to get struct clk pointers from a struct clk_hw so that clk providers
can consume the clks they provide, if they need to do something like that. This
has been a long missing part of the clk provider API that will help us move
away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are
added for the clk_set_rate() "range" functions, similar to the tracepoints we
already have for clk_set_rate() and we added a column to debugfs to help
developers understand the hardware enable state of clks in case firmware or
bootloader state is different than what is expected. Overall the core changes
are mostly improving the clk driver writing experience.
At the driver level, we have the usual collection of driver updates and new
drivers for new SoCs. This time around the Qualcomm folks introduced a good
handful of clk drivers for various parts of three or four SoCs. The SiFive
folks added a new clk driver for their FU740 SoCs, coming in second on the
diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that
for various new features. One last thing to note in the driver area is that the
i.MX driver has gained a new binding to support SCU clks after being on the
list for many months. It uses a two cell binding which is sort of rare in clk
DT bindings. Beyond that we have the usual set of driver fixes and tweaks that
come from more testing and finding out that some configuration was wrong or
that a driver could support being built as a module.
Core:
- Add some trace points for clk_set_rate() "range" functions
- Add hardware enable information to clk_summary debugfs
- Replace clk-provider.h with of_clk.h when possible
- Add devm variant of clk_notifier_register()
- Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
New Drivers:
- Bindings for Canaan K210 SoC clks
- Support for SiFive FU740 PRCI
- Camera clks on Qualcomm SC7180 SoCs
- GCC and RPMh clks on Qualcomm SDX55 SoCs
- RPMh clks on Qualcomm SM8350 SoCs
- LPASS clks on Qualcomm SM8250 SoCs
Updates:
- DVFS support for AT91 clk driver
- Update git repo branch for Renesas clock drivers
- Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
- Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
- Stop using __raw_*() I/O accessors in Renesas clk drivers
- One more conversion of DT bindings to json-schema
- Make i.MX clk-gate2 driver more flexible
- New two cell binding for i.MX SCU clks
- Drop of_match_ptr() in i.MX8 clk drivers
- Add arch dependencies for Rockchip clk drivers
- Fix i2s on Rockchip rk3066
- Add MIPI DSI clks on Amlogic axg and g12 SoCs
- Support modular builds of Amlogic clk drivers
- Fix an Amlogic Video PLL clock dependency
- Samsung Kconfig dependencies updates for better compile test coverage
- Refactoring of the Samsung PLL clocks driver
- Small Tegra driver cleanups
- Minor fixes to Ingenic and VC5 clk drivers
- Cleanup patches to remove unused variables and plug memory leaks
-----BEGIN PGP SIGNATURE-----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=Wt9O
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework got some nice improvements this time around. We
gained the ability to get struct clk pointers from a struct clk_hw so
that clk providers can consume the clks they provide, if they need to
do something like that. This has been a long missing part of the clk
provider API that will help us move away from exposing a struct clk
pointer in the struct clk_hw. Tracepoints are added for the
clk_set_rate() "range" functions, similar to the tracepoints we
already have for clk_set_rate() and we added a column to debugfs to
help developers understand the hardware enable state of clks in case
firmware or bootloader state is different than what is expected.
Overall the core changes are mostly improving the clk driver writing
experience.
At the driver level, we have the usual collection of driver updates
and new drivers for new SoCs. This time around the Qualcomm folks
introduced a good handful of clk drivers for various parts of three or
four SoCs. The SiFive folks added a new clk driver for their FU740
SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic
SoCs had lots of work done after that for various new features. One
last thing to note in the driver area is that the i.MX driver has
gained a new binding to support SCU clks after being on the list for
many months. It uses a two cell binding which is sort of rare in clk
DT bindings. Beyond that we have the usual set of driver fixes and
tweaks that come from more testing and finding out that some
configuration was wrong or that a driver could support being built as
a module.
Summary:
Core:
- Add some trace points for clk_set_rate() "range" functions
- Add hardware enable information to clk_summary debugfs
- Replace clk-provider.h with of_clk.h when possible
- Add devm variant of clk_notifier_register()
- Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
New Drivers:
- Bindings for Canaan K210 SoC clks
- Support for SiFive FU740 PRCI
- Camera clks on Qualcomm SC7180 SoCs
- GCC and RPMh clks on Qualcomm SDX55 SoCs
- RPMh clks on Qualcomm SM8350 SoCs
- LPASS clks on Qualcomm SM8250 SoCs
Updates:
- DVFS support for AT91 clk driver
- Update git repo branch for Renesas clock drivers
- Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
- Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
- Stop using __raw_*() I/O accessors in Renesas clk drivers
- One more conversion of DT bindings to json-schema
- Make i.MX clk-gate2 driver more flexible
- New two cell binding for i.MX SCU clks
- Drop of_match_ptr() in i.MX8 clk drivers
- Add arch dependencies for Rockchip clk drivers
- Fix i2s on Rockchip rk3066
- Add MIPI DSI clks on Amlogic axg and g12 SoCs
- Support modular builds of Amlogic clk drivers
- Fix an Amlogic Video PLL clock dependency
- Samsung Kconfig dependencies updates for better compile test coverage
- Refactoring of the Samsung PLL clocks driver
- Small Tegra driver cleanups
- Minor fixes to Ingenic and VC5 clk drivers
- Cleanup patches to remove unused variables and plug memory leaks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
dt-binding: clock: Document canaan,k210-clk bindings
dt-bindings: Add Canaan vendor prefix
clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"
clk: ingenic: Fix divider calculation with div tables
clk: sunxi-ng: Make sure divider tables have sentinel
clk: s2mps11: Fix a resource leak in error handling paths in the probe function
clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
clk: si5351: Wait for bit clear after PLL reset
clk: at91: sam9x60: remove atmel,osc-bypass support
clk: at91: sama7g5: register cpu clock
clk: at91: clk-master: re-factor master clock
clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
clk: at91: sama7g5: decrease lower limit for MCK0 rate
clk: at91: sama7g5: remove mck0 from parent list of other clocks
clk: at91: clk-sam9x60-pll: allow runtime changes for pll
clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
clk: at91: clk-master: add 5th divisor for mck master
clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
dt-bindings: clock: at91: add sama7g5 pll defines
clk: at91: sama7g5: fix compilation error
...
We have a handful of new kernel features for 5.11:
* Support for the contiguous memory allocator.
* Support for IRQ Time Accounting
* Support for stack tracing
* Support for strict /dev/mem
* Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending along
either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the
.text.init alignment patch. With any luck we'll sort out the issue, but
given how many bugs get fixed all over the place and how unrelated those
features seem my guess is that we're just running into something that's
been lurking for a while and has already been fixed in the newer QEMU
(though I wouldn't be surprised if it's one of these implicit
assumptions we have in the boot flow). If it was hardware I'd be
strongly inclined to look more closely, but given that users can upgrade
their simulators I'm less worried about it.
There are two merge conflicts, both in build files. They're both a bit
clunky: arch/riscv/Kconfig is out of order (I have a script that's
supposed to keep them in order, I'll fix it) and lib/Makefile is out of
order (though GENERIC_LIB here doesn't mean quite what it does above).
-----BEGIN PGP SIGNATURE-----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=GWIH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"We have a handful of new kernel features for 5.11:
- Support for the contiguous memory allocator.
- Support for IRQ Time Accounting
- Support for stack tracing
- Support for strict /dev/mem
- Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending
along either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
the .text.init alignment patch.
With any luck we'll sort out the issue, but given how many bugs get
fixed all over the place and how unrelated those features seem my
guess is that we're just running into something that's been lurking
for a while and has already been fixed in the newer QEMU (though I
wouldn't be surprised if it's one of these implicit assumptions we
have in the boot flow). If it was hardware I'd be strongly inclined to
look more closely, but given that users can upgrade their simulators
I'm less worried about it"
* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
arm64: Use the generic devmem_is_allowed()
arm: Use the generic devmem_is_allowed()
RISC-V: Use the new generic devmem_is_allowed()
lib: Add a generic version of devmem_is_allowed()
riscv: Fixed kernel test robot warning
riscv: kernel: Drop unused clean rule
riscv: provide memmove implementation
RISC-V: Move dynamic relocation section under __init
RISC-V: Protect all kernel sections including init early
RISC-V: Align the .init.text section
RISC-V: Initialize SBI early
riscv: Enable ARCH_STACKWALK
riscv: Make stack walk callback consistent with generic code
riscv: Cleanup stacktrace
riscv: Add HAVE_IRQ_TIME_ACCOUNTING
riscv: Enable CMA support
riscv: Ignore Image.* and loader.bin
riscv: Clean up boot dir
riscv: Fix compressed Image formats build
RISC-V: Add kernel image sections to the resource tree
-----BEGIN PGP SIGNATURE-----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=cadT
-----END PGP SIGNATURE-----
Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
"This sits on top of of the core entry/exit and x86 entry branch from
the tip tree, which contains the generic and x86 parts of this work.
Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.
With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
signal.c, and also remove a deadlock work-around in io_uring around
knowing that signal based task_work waking is invoked with the sighand
wait queue head lock.
The motivation for this work is to decouple signal notify based
task_work, of which io_uring is a heavy user of, from sighand. The
sighand lock becomes a huge contention point, particularly for
threaded workloads where it's shared between threads. Even outside of
threaded applications it's slower than it needs to be.
Roman Gershman <romger@amazon.com> reported that his networked
workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
spent hammering on the sighand lock, showing 57% of the CPU time there
[1].
There are further cleanups possible on top of this. One example is
TIF_PATCH_PENDING, where a patch already exists to use
TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
consolidation, but the work stands on its own as well"
[1] https://github.com/axboe/liburing/issues/215
* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
io_uring: remove 'twa_signal_ok' deadlock work-around
kernel: remove checking for TIF_NOTIFY_SIGNAL
signal: kill JOBCTL_TASK_WORK
io_uring: JOBCTL_TASK_WORK is no longer used by task_work
task_work: remove legacy TWA_SIGNAL path
sparc: add support for TIF_NOTIFY_SIGNAL
riscv: add support for TIF_NOTIFY_SIGNAL
nds32: add support for TIF_NOTIFY_SIGNAL
ia64: add support for TIF_NOTIFY_SIGNAL
h8300: add support for TIF_NOTIFY_SIGNAL
c6x: add support for TIF_NOTIFY_SIGNAL
alpha: add support for TIF_NOTIFY_SIGNAL
xtensa: add support for TIF_NOTIFY_SIGNAL
arm: add support for TIF_NOTIFY_SIGNAL
microblaze: add support for TIF_NOTIFY_SIGNAL
hexagon: add support for TIF_NOTIFY_SIGNAL
csky: add support for TIF_NOTIFY_SIGNAL
openrisc: add support for TIF_NOTIFY_SIGNAL
sh: add support for TIF_NOTIFY_SIGNAL
um: add support for TIF_NOTIFY_SIGNAL
...
Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This
patch is prepared for fu740 support.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com>
Link: https://lore.kernel.org/r/20201209094916.17383-3-zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as
a result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one
Arm platform. These all do timer ticks slighly differently, and this
gets cleaned up to the point they at least all call the same helper
function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
in Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=QpNs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
This is a cleanup series from Nicholas Piggin, preparing for
later changes. The asm/mmu_context.h header are generalized
and common code moved to asm-gneneric/mmu_context.h.
This saves a bit of code and makes it easier to change in
the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=NpMX
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic mmu-context cleanup from Arnd Bergmann:
"This is a cleanup series from Nicholas Piggin, preparing for later
changes. The asm/mmu_context.h header are generalized and common code
moved to asm-gneneric/mmu_context.h.
This saves a bit of code and makes it easier to change in the future"
* tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits)
h8300: Fix generic mmu_context build
m68k: mmu_context: Fix Sun-3 build
xtensa: use asm-generic/mmu_context.h for no-op implementations
x86: use asm-generic/mmu_context.h for no-op implementations
um: use asm-generic/mmu_context.h for no-op implementations
sparc: use asm-generic/mmu_context.h for no-op implementations
sh: use asm-generic/mmu_context.h for no-op implementations
s390: use asm-generic/mmu_context.h for no-op implementations
riscv: use asm-generic/mmu_context.h for no-op implementations
powerpc: use asm-generic/mmu_context.h for no-op implementations
parisc: use asm-generic/mmu_context.h for no-op implementations
openrisc: use asm-generic/mmu_context.h for no-op implementations
nios2: use asm-generic/mmu_context.h for no-op implementations
nds32: use asm-generic/mmu_context.h for no-op implementations
mips: use asm-generic/mmu_context.h for no-op implementations
microblaze: use asm-generic/mmu_context.h for no-op implementations
m68k: use asm-generic/mmu_context.h for no-op implementations
ia64: use asm-generic/mmu_context.h for no-op implementations
hexagon: use asm-generic/mmu_context.h for no-op implementations
csky: use asm-generic/mmu_context.h for no-op implementations
...
For architectures that enable ARCH_HAS_SET_MEMORY having the ability to
verify that a page is mapped in the kernel direct map can be useful
regardless of hibernation.
Add RISC-V implementation of kernel_page_present(), update its forward
declarations and stubs to be a part of set_memory API and remove ugly
ifdefery in inlcude/linux/mm.h around current declarations of
kernel_page_present().
Link: https://lkml.kernel.org/r/20201109192128.960-5-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The design of DEBUG_PAGEALLOC presumes that __kernel_map_pages() must
never fail. With this assumption is wouldn't be safe to allow general
usage of this function.
Moreover, some architectures that implement __kernel_map_pages() have this
function guarded by #ifdef DEBUG_PAGEALLOC and some refuse to map/unmap
pages when page allocation debugging is disabled at runtime.
As all the users of __kernel_map_pages() were converted to use
debug_pagealloc_map_pages() it is safe to make it available only when
DEBUG_PAGEALLOC is set.
Link: https://lkml.kernel.org/r/20201109192128.960-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I've just got one fix. It's nothing critical, just a randconfig that
wasn't building. That said, it does seem pretty safe and is technically
a regression so I'm sending it along for 5.10:
* Define get_cycles64() all the time, as it's used by most
configurations.
-----BEGIN PGP SIGNATURE-----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=wSj3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"Just one fix. It's nothing critical, just a randconfig that wasn't
building. That said, it does seem pretty safe and is technically a
regression so I'm sending it along for 5.10:
- define get_cycles64() all the time, as it's used by most
configurations"
* tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Define get_cycles64() regardless of M-mode
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an
implementation of devmem_is_allowed() that's exactly the same as the version in
a handful of other ports. Rather than duplicate code, I've put a generic
version of this in lib/ and used it for the RISC-V port.
* palmer/generic-devmem:
arm64: Use the generic devmem_is_allowed()
arm: Use the generic devmem_is_allowed()
RISC-V: Use the new generic devmem_is_allowed()
lib: Add a generic version of devmem_is_allowed()
The timer driver uses get_cycles64() unconditionally to obtain the current
time. A recent refactoring lost the common definition for some configs, which
is now the only one we need.
Fixes: d5be89a8d1 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The memmove used by the kernel feature like KASAN.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Nick Hu <nick650823@gmail.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Now that ARM started following the example of arm64 and RISC-V, and
no longer imposes any restrictions on the placement of the FDT in
memory at boot, we no longer need per-arch implementations of
efi_get_max_fdt_addr() to factor out the differences. So get rid of
it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20201029134901.9773-1-ardb@kernel.org
idle path. Similar to the entry path the low level idle functions have to
be non-instrumentable.
-----BEGIN PGP SIGNATURE-----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=raED
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
I've collected a handful of fixes over the past few weeks:
* A fix to un-break the build-id argument to the vDSO build, which is necessary
for the LLVM linker.
* A fix to initialize the jump label subsystem, without which it (and all the
stuff that uses it) doesn't actually function.
* A fix to include <asm/barrier.h> from <vdso/processor.h>, without which some
drivers won't compile.
I know it's the holidays, but I had some hiccups getting this tested earlier
this week so it's just going out now. None of these are tremendously urgent,
so if they don't make rc6 it's not a big deal. I'll have some more fixes
coming next week either way.
-----BEGIN PGP SIGNATURE-----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=E9OC
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I've collected a handful of fixes over the past few weeks:
- A fix to un-break the build-id argument to the vDSO build, which is
necessary for the LLVM linker.
- A fix to initialize the jump label subsystem, without which it (and
all the stuff that uses it) doesn't actually function.
- A fix to include <asm/barrier.h> from <vdso/processor.h>, without
which some drivers won't compile"
* tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: fix barrier() use in <vdso/processor.h>
RISC-V: Add missing jump label initialization
riscv: Explicitly specify the build id style in vDSO Makefile again
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/BZx4ACgkQmmx57+YA
GNnSPA/9HK0dwaGuXHRxKpt2ShHt5kOmixlmRJszYmuSIJde945EJNTP/+2l2Qs2
TDXmOU8pdZSAZX2EHLLEksNsnhUoTBWzsn4WxHRTNVc2cYuHHA6PKMdAPV136ag/
U0gnC7eCYKCDM3A1A/G4437PDI3vfm0Wzo6Biikxwhi861bshxjVs3DapDQw5+Zn
bOS8CCNpmwpDC26ZAfIY8es32Hg063GhdJXQ01uqkaZLJdRn7ui6bkv18vi+b3gM
QLeaubDT4+oH+HpJJpFZ01iugBFah5iJtg/JtWyap/LJSkelyjU9Gr7qrrpI7M3t
hfDzk7fRjHO1XPn2bDc4InWJEoekE9vde5M0QKn3ID8dFO1M5tNqov2uH40m4fQD
UM7irWe0BmP9Nms5LV7dMWChPn8FUEr34ZYAwF9B+YPL1Ec6GGn8mA/E0Iz8pre0
MUgv5LZ8LYdeYvSSpXrgBkgv2pwni5rTc7/K9KtvGdkLQ3rOuihPBbPyR0YTYa8f
UkboIky80lcx/uyhhu+OxWxe0q+Ug8WF87UkPIDDhsaF9W2DoErIwiCQhqS+AKs4
9DiCBzLgF6mZ11ijK73DtLNBmQnKdssV9Bs5lnOO0XqYdoqiQ5gRJWrixvI0OWSa
WGt66UV481rV/Oxlt1A/1lynYkZU0b121fFFB/EPbuFuUwZu9So=
=xgYa
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures"
* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
Dynamic relocation section are only required during boot. Those sections
can be freed after init. Thus, it can be moved to __init section.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, .init.text & .init.data are intermixed which makes it impossible
apply different permissions to them. .init.data shouldn't need exec
permissions while .init.text shouldn't have write permission. Moreover,
the strict permission are only enforced /init starts. This leaves the
kernel vulnerable from possible buggy built-in modules.
Keep .init.text & .data in separate sections so that different permissions
are applied to each section. Apply permissions to individual sections as
early as possible. This improves the kernel protection under
CONFIG_STRICT_KERNEL_RWX. We also need to restore the permissions for the
entire _init section after it is freed so that those pages can be used
for other purpose.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
In order to improve kernel text protection, we need separate .init.text/
.init.data/.text in separate sections. However, RISC-V linker relaxation
code is not aware of any alignment between sections. As a result, it may
relax any RISCV_CALL relocations between sections to JAL without realizing
that an inter section alignment may move the address farther. That may
lead to a relocation truncated fit error. However, linker relaxation code
is aware of the individual section alignments.
The detailed discussion on this issue can be found here.
https://github.com/riscv/riscv-gnu-toolchain/issues/738
Keep the .init.text section aligned so that linker relaxation will take
that as a hint while relaxing inter section calls.
Here are the code size changes for each section because of this change.
section change in size (in bytes)
.head.text +4
.text +40
.init.text +6530
.exit.text +84
The only significant increase in size happened for .init.text because
all intra relocations also use 2MB alignment.
Suggested-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, SBI is initialized towards the end of arch setup. This prevents
the set memory operations to be invoked earlier as it requires a full tlb
flush.
Initialize SBI as early as possible.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
