IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Now that the driver is properly split between bridge and capture,
rename the video device to highlight its role and be in line with
the bridge entity naming.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to support the isp workflow, we need to be able to configure
the hardware from the bridge when the capture device is not used.
As a result, move all hardware configuration calls from capture to
the bridge. Only the window configuration part (which is specific
to using capture) remains there.
This effectively opens the way for hooking the bridge to the
isp in the future.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The remote subdev connected to the capture video device is always
our bridge, so get the bridge subdev directly instead of using a
dedicated helper (which is removed by this commit).
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rework the capture link validate implementation with actual logic that
reflects the possibilities of the device instead of the combinatory helper
functions, using the added match list helper
sun6i_csi_is_format_supported() when needed. Remove the previous dedicated
helper.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Switch over to using the static format table descriptions to configure
registers. Rework the hardware configuration helpers to leverage
information from the format structures and benefit from their logic.
Remove the previous dedicated helpers.
The intention is to make the interaction between the different formats
and the hardware side more visible and clear.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a table that describes each pixel format and associated output
register configuration with necessary tweaks. It will be used later on
to configure the hardware.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Introduce a more informative format list for the bridge, with
information about how to configure the input. This separation will
later be useful when using the bridge standalone (without capture)
for the isp workflow.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Another instance of removing a duplicated variable and using common
helpers instead.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Introduce new helpers to ease getting information about the bridge.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the custom sun6i_csi_get_bpp helper in favor of common v4l2
infrastructure and rework the related window configuration code.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the need for local copies of the v4l2 format and add a common
helper to prepare a format compatible with the driver, using the
relevant v4l2 helpers.
Report a raw colorspace for bayer-encoded pixel formats instead of SRGB.
Also cleanup the size bound defines while at it.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Continue moving things over to capture in tidy helpers.
Also take the occasion to remove the config struct, which is
unwelcome redundancy and use the capture helpers instead.
The code is only adapted to reflect the removal of the config
structure. No functional change intended.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Let's just enable the module when we start using it (at stream on)
and benefit from runtime pm instead of enabling it at first open.
Also reorder the call to v4l2_pipeline_pm_get.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Create minimal helpers that split the enable/disable flow, which will
make it easier to move control over to the bridge later on.
Generally speaking the goal is to move register configuration to
the capture code and later split it with the bridge code.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Instead of calculating the planar_offset at one point and using it
later in a dedicated function, reimplement address configuration
with v4l2 format info in the buffer_configure function.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This cleans up the register definitions a bit, adds a prefix, remove masks.
Registers are now fully defined, some additional fields were added when
needed. New format definitions are added for future use.
Some fields are wrongly defined (inverted) in Allwinner literature
(e.g. field vs frame prefixes), which is quite misleading. They are
now corrected to reflect their actual behavior.
This should only be a cosmetic commit. No functional change intended.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The current implementation requires up to 3 buffers to properly
implement page flipping without losing frames: one is configured
before the video stream is started, one just after that and page
flipping is synchronized to the frame done interrupt. The comment in
the code mentions that "CSI will lookup the next dma buffer for next
frame before the current frame done IRQ triggered".
Based on observations of the CSI unit behavior, it seems that the
buffer DMA address is sampled when the frame scan begins (in addition
to starting the stream), which corresponds to the vblank interrupt
that hits just before the frame-done interrupt of the previous frame.
As a result, the address configured at the frame done interrupt is not
actually used for the next frame but for the one after that.
This proposal changes the page flipping sync point to the vsync
interrupt, which allows the DMA address to be sampled for the next
frame instead and allows operating with only two buffers.
In addition to the change in the sync point, the code is refactored
to introduce a notion of state that clarifies tracking of the buffers
with tidy functions.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In an effort to distinguish between the core csi engine (to be
represented as the bridge) and the dma engine (the capture video
device), rename the video component to capture, with the appropriate
prefix. No functional change intended.
[Sakari Ailus: fix wrong variable issue (video -> capture) missed in patch]
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Introduce a bridge v4l2 subdev to prepare for separation between the
processing part (bridge) and the dma engine, which is required to
properly support ths isp workflow later on.
Currently the bridge just manages fwnode mapping to media pads,
using an async notifier (which was previously in the main code).
The s_stream video op just forwards to the connected v4l2 subdev
(sensor or MIPI CSI-2 bridge).
The video capture device is now registered after the bridge and
attaches to it with a media link.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As noted in the headers for V4L2_SUBDEV_FL_HAS_EVENTS,
"controls can send events, thus drivers exposing controls
should set this flag".
This driver exposes controls, but didn't reflect that it
could generate events. Correct this, and add the default
event handler functions.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sensor supports 8 or 10 bit readout modes, but the
driver only supported 10 bit.
Add 8 bit readout.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As required by libcamera, add the relevant cropping targets
to report which portion of the sensor is being read out in
any mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There's no reason why HBLANK has to be read-only as it
only changes the TIMING_HTS register in the sensor.
Remove the READ_ONLY flag, and add the relevant handling
for it.
The minimum value also varies based on whether continuous clock
mode is being used or not, so allow hblank_min to depend on
that.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Adds support for V4L2_CID_HFLIP and V4L2_CID_VFLIP to allow
flipping the image.
The driver previously enabled H & V flips in the register table,
therefore the controls default to the same settings to avoid
changing the behaviour.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Programming the sensor with TIMING_VTS (aka LPFR) was done
when triggered by a change in exposure or gain, but not
when V4L2_CID_VBLANK was changed. Dynamic frame rate
changes could therefore not be achieved.
Separate out programming TIMING_VTS so that it is triggered
by set_ctrl(V4L2_CID_VBLANK)
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use v4l2_ctrl_new_fwnode_properties to add V4L2_CID_CAMERA_ORIENTATION
and V4L2_CID_CAMERA_SENSOR_ROTATION.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sensor supports either having the CSI2 clock lane free
running, or gated when there is no packet to transmit.
The driver only selected gated (non-continuous) clock mode.
Add code to allow fwnode to configure whether the clock is
gated or free running.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The configured vblank_min setting of 151 (meaning VTS of
720 + 151 = 871) is far higher than the setting that works on
the sensor, and there are no obvious restrictions stated in the
datasheet.
Reduce the vblank_min to allow for faster frame rates.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The calculations from pixel rate, width+hblank, and height+vblank
do not give the correct framerate - it's half the speed it should
be.
The datasheet lists the default for the TIMING_HTS registers (0x380c/d)
as being 0x2d8 (728) which is less than the width of the image, so
the units clearly can't be pixels.
If TIMING_HTS is considered to be units of 2-pixels, then the
resulting value of 0x5b0 (1456) makes all the calculations correct.
This driver is reporting an HBLANK value of 250, with an image width
of 1280, so TIMING_HTS is 1530 (0x5fa) pixels. However it was also
setting the register to 0x5fa, thereby not taking into account it
being units of 2-pixels.
Correct the register value to 0x2fd so that all the timing calculations
give the correct results.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver currently has multiple assumptions that there is
only one supported mode.
Convert supported_mode to an array, and fix up all references
to correctly look at that array.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The pixel rate is determined by the PLL setup in the common
registers, not by the mode specific registers, therefore
remove it from the mode definition and define it for all modes.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The format code is independent of mode, and each mode could
support both Y10 and Y8, so disassociate the code from the
mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Currently only one mode is supported, so all registers were
dropped in one list.
In preparation for adding more modes, split out the common registers
from those which configure the mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
TIMING_VTS (registers 0x380e/f), EXPOSURE (registers
0x3500/1/2), and GAIN (0x3509) are all set from
ov9282_update_exp_gain as part of the control handler,
therefore they do not need to be in the main list of
registers.
Remove them.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make sure we call ov5645_entity_init_cfg() before registering the subdev
to make sure default formats are set up.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make sure we call the PM functions while s_stream(0) even in case of
errors in the code flow.
v4l2-core takes care of warning the user so no need to add a warning
message in the driver.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Switch to using runtime PM for power management.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Sony imx577 uses the same silicon enabling reference code in the
available examples provided as the imx412.
Add in compatible strings to enable and differentiate the parts.
Cc: sakari.ailus@iki.fi
Cc: dave.stevenson@raspberrypi.com
Cc: jacopo@jmondi.org
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
imx412 and imx577 return the same chip-id when interrogated via i2c.
I've confirmed this myself by
Sakari suggested we should add a new compat which should be reflected in
the name of the media entity
https://patchwork.kernel.org/project/linux-media/patch/20220607134057.2427663-3-bryan.odonoghue@linaro.org/#24894500
Set up the .data parameter of of_device_id to pass a string which
we use to set the media entity name. Once done we can add in imx577 as a
compatible chips with the media names reflecting the directed compat string.
Cc: sakari.ailus@iki.fi
Cc: dave.stevenson@raspberrypi.com
Cc: jacopo@jmondi.org
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Replace custom implementation of the device_match_fwnode().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRSrcquik9wuZrNjXJrQl33mxwedgUCY2U2ZQAKCRBrQl33mxwe
dhaLAP4t7vpFHF6UwPKhUsnBjykDE9cqX5tFY5hV/P4B3dhm3wEAmJFEi38QFQlb
gkISSnYIx5DZGP2iBXT96ftGlPI7qgg=
=wwvs
-----END PGP SIGNATURE-----
Merge tag 'br-v6.2e' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v6.2e' of git://linuxtv.org/hverkuil/media_tree: (29 commits)
media: davinci/vpbe: Fix a typo ("defualt_mode")
media: sun6i-csi: Remove unnecessary print function dev_err()
media: Documentation: Drop deprecated bytesused == 0
media: platform: exynos4-is: fix return value check in fimc_md_probe()
media: dvb-core: remove variable n, turn for-loop to while-loop
media: vivid: fix compose size exceed boundary
media: rkisp1: make const arrays ae_wnd_num and hist_wnd_num static
media: dvb-core: Fix UAF due to refcount races at releasing
media: rkvdec: Add required padding
media: aspeed: Extend debug message
media: aspeed: Support aspeed mode to reduce compressed data
media: Documentation: aspeed-video: Add user documentation for the aspeed-video driver
media: v4l2-ctrls: Reserve controls for ASPEED
media: v4l: Add definition for the Aspeed JPEG format
staging: media: tegra-video: fix device_node use after free
staging: media: tegra-video: fix chan->mipi value on error
media: cedrus: initialize controls a bit later
media: cedrus: prefer untiled capture format
media: cedrus: Remove cedrus_codec enum
media: cedrus: set codec ops immediately
...
-----BEGIN PGP SIGNATURE-----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=hwbL
-----END PGP SIGNATURE-----
Merge tag 'tag-venus-for-v6.2' of git://linuxtv.org/svarbanov/media_tree into media_stage
Venus updates for v6.2
* tag 'tag-venus-for-v6.2' of git://linuxtv.org/svarbanov/media_tree:
venus: pm_helpers: Fix error check in vcodec_domains_get()
venus: firmware: Correct assertion of reset bit on remote processor
venus: firmware: Correct non-pix start and end addresses
venus: firmware: Correct reset bit
MAINTAINERS: Change email for Venus driver
MAINTAINERS: Add Vikash as VENUS video driver co-maintainer
* git://linuxtv.org/sailus/media_tree: (47 commits)
media: i2c: ov4689: code cleanup
media: ov9650: Drop platform data code path
media: ov7670: Drop unused include
media: ov2640: Drop legacy includes
media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
media: dt-bindings: add bindings for Toshiba TC358746
phy: dphy: add support to calculate the timing based on hs_clk_rate
phy: dphy: refactor get_default_config
v4l: subdev: Warn if disabling streaming failed, return success
dw9768: Enable low-power probe on ACPI
media: i2c: imx290: Replace GAIN control with ANALOGUE_GAIN
media: i2c: imx290: Add crop selection targets support
media: i2c: imx290: Factor out format retrieval to separate function
media: i2c: imx290: Move registers with fixed value to init array
media: i2c: imx290: Create controls for fwnode properties
media: i2c: imx290: Implement HBLANK and VBLANK controls
media: i2c: imx290: Split control initialization to separate function
media: i2c: imx290: Fix max gain value
media: i2c: imx290: Add exposure time control
media: i2c: imx290: Define more register macros
...
There are three cases of power domain management on supported platforms:
1) CAMSS on MSM8916, where a single VFE power domain is operated outside
of the camss device driver,
2) CAMSS on MSM8996 and SDM630/SDM660, where two VFE power domains are
managed separately by the camss device driver, the power domains are
linked and unlinked on demand by their functions vfe_pm_domain_on()
and vfe_pm_domain_off() respectively,
3) CAMSS on SDM845 and SM8250 platforms, and there are two VFE power
domains and their parent power domain TITAN_TOP, the latter one
shall be turned on prior to turning on any of VFE power domains.
Due to a previously missing link between TITAN_TOP and VFEx power domains
in the latter case, which is now fixed by [1], it was decided always to
turn on all found VFE power domains and TITAN_TOP power domain, even if
just one particular VFE is needed to be enabled or none of VFE power
domains are required, for instance the latter case is when vfe_lite is in
use. This misusage becomes more incovenient and clumsy, if next generations
are to be supported, for instance CAMSS on SM8450 has three VFE power
domains.
The change splits the power management support for platforms with TITAN_TOP
parent power domain, and, since 'power-domain-names' property is not
present in camss device tree nodes, the assumption is that the first
N power domains from the 'power-domains' list correspond to VFE power
domains, and, if the number of power domains is greater than number of
non-lite VFEs, then the last power domain from the list is the TITAN_TOP
power domain.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
