IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Only the HW rfkill state is toggled on laptops with quirks->ec_read_only
(so far only MSI Wind U90/U100). There are, however, a few issues with
the implementation:
1. The initial HW state is always unblocked, regardless of the actual
state on boot, because msi_init_rfkill only sets the SW state,
regardless of ec_read_only.
2. The initial SW state corresponds to the actual state on boot, but it
can't be changed afterwards, because set_device_state returns
-EOPNOTSUPP. It confuses the userspace, making Wi-Fi and/or Bluetooth
unusable if it was blocked on boot, and breaking the airplane mode if
the rfkill was unblocked on boot.
Address the above issues by properly initializing the HW state on
ec_read_only laptops and by allowing the userspace to toggle the SW
state. Don't set the SW state ourselves and let the userspace fully
control it. Toggling the SW state is a no-op, however, it allows the
userspace to properly toggle the airplane mode. The actual SW radio
disablement is handled by the corresponding rtl818x_pci and btusb
drivers that have their own rfkills.
Tested on MSI Wind U100 Plus, BIOS ver 1.0G, EC ver 130.
Fixes: 0816392b97d4 ("msi-laptop: merge quirk tables to one")
Fixes: 0de6575ad0a8 ("msi-laptop: Add MSI Wind U90/U100 support")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230721145423.161057-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
key might contain private part of the key, so better use
kfree_sensitive to free it.
Signed-off-by: Wang Ming <machel@vivo.com>
Link: https://lore.kernel.org/r/20230717101114.18966-1-machel@vivo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS
method. If VGBS is not called on boot, the firmware sends an initial
0xcd event shortly after calling the BTNL method, but only if the device
is booted in the laptop mode. However, if the device is booted in the
tablet mode and VGBS is not called, there is no initial 0xcc event, and
the input device for SW_TABLET_MODE is not registered up until the user
turns the device into the laptop mode.
Call VGBS on boot on this device to get the initial state of
SW_TABLET_MODE in a reliable way.
Tested with BIOS 1.13.1.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230716183213.64173-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE
are only send after the BTNL ACPI method has been called.
Likely more devices need this, so make the BTNL ACPI method unconditional
instead of only doing it on devices with a 5 button array.
Note this also makes the intel_button_array_enable() call in probe()
unconditional, that function does its own priv->array check. This makes
the intel_button_array_enable() call in probe() consistent with the calls
done on suspend/resume which also rely on the priv->array check inside
the function.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95@gmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com
APMF fn8 can notify EC about the OS slider position change. Add this
capability to the PMF driver so that it can call the APMF fn8 based on
the changes in the Platform profile events.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230714144435.1239776-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
apmf_get_system_params() failure is not a critical event, reduce its
verbosity from dev_err to dev_dbg.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230714144435.1239776-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Microsoft Modern Wireless Headset (appearing on the host as "Microsoft
USB Link") has a playback and a capture mixer volume/switch, but they
are fairly broken. The descriptor reports wrong dB ranges for
playback, and the capture volume/switch don't influence on the actual
recording at all. Moreover, there seem instabilities in the
connection, and at best, we should disable the runtime PM.
So this ended up with a quirk entry for:
- Correct the playback dB range;
I picked up some reasonable values but it's a guess work
- Disable the capture mixer;
it's completely useless and confuses PA/PW
- Suppress get-sample-rate, apply the delay for message handling,
and suppress the auto-suspend
The behavior of the wheel control on the headset is somehow flaky,
too, but it's an issue of HID.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1207129
Link: https://lore.kernel.org/r/20230725092057.15115-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This HP Notebook used ALC236 codec with COEF 0x07 idx 1 controlling
the mute LED. Enable already existing quirk for this device.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230725111509.623773-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work
because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2
series datasheet(I2SC Mode Register of Register Summary).
So use the 6.144Mhz instead of 12.288Mhz to support 8K sample.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Link: https://lore.kernel.org/r/20230715030620.62328-1-aarongt.shen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090711.128247-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090654.128230-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090732.128282-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090721.128264-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090643.128213-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit a3a57bf07de23fe1ff779e0fdf710aa581c3ff73 ("net: stmmac: work
around sporadic tx issue on link-up") worked around a problem with TX
sometimes not working after a link-up by avoiding a redundant write to
MAC_CTRL_REG (aka GMAC_CONFIG), since the IP appeared to have problems
with handling multiple writes to that register in some cases.
That commit however only added the work around to dwmac_lib.c (apart
from the common code in stmmac_main.c), but my systems with version
4.21a of the IP exhibit the same problem, so add the work around to
dwmac4_lib.c too.
Fixes: a3a57bf07de2 ("net: stmmac: work around sporadic tx issue on link-up")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721-stmmac-tx-workaround-v1-1-9411cbd5ee07@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As of today, hash extraction support is enabled for all the silicons.
Because of which we are facing initialization issues when the silicon
does not support hash extraction. During creation of the hardware
parsing table for IPv6 address, we need to consider if hash extraction
is enabled then extract only 32 bit, otherwise 128 bit needs to be
extracted. This patch fixes the issue and configures the hardware parser
based on the availability of the feature.
Fixes: a95ab93550d3 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721061222.2632521-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All error handling paths go to 'out', except this one. Be consistent and
also branch to 'out' here.
Fixes: c10a652e239e ("drm/i915/selftests: Rework context handling in hugepages selftests")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7a036b88671312ee9adc01c74ef5b3376f690b76.1689619758.git.christophe.jaillet@wanadoo.fr
(cherry picked from commit 361ecaadb1ce3c5312c7c4c419271326d43899eb)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Dpt objects that are created from internal get evicted when there is
memory pressure and do not get restored when pinned during scanout. The
pinned page table entries look corrupted and programming the display
engine with the incorrect pte's result in DE throwing pipe faults.
Create DPT objects from shmem and mark the object as dirty when pinning so
that the object is restored when shrinker evicts an unpinned buffer object.
v2: Unconditionally mark the dpt objects dirty during pinning(Chris).
Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Cc: <stable@vger.kernel.org> # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718225118.2562132-1-radhakrishna.sripada@intel.com
(cherry picked from commit e91a777a6e602ba0e3366e053e4e094a334a1244)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Hangbin Liu says:
====================
Fix up dev flags when add P2P down link
When adding p2p interfaces to bond/team. The POINTOPOINT, NOARP flags are
not inherit to up devices. Which will trigger IPv6 DAD. Since there is
no ethernet MAC address for P2P devices. This will cause unexpected DAD
failures.
====================
Link: https://lore.kernel.org/r/20230721040356.3591174-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When adding a point to point downlink to team device, we neglected to reset
the team's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to team device. Fix this by
remove multicast/broadcast flags and add p2p and noarp flags.
After removing the none ethernet interface and adding an ethernet interface
to team, we need to reset team interface flags. Unlike bonding interface,
team do not need restore IFF_MASTER, IFF_SLAVE flags.
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When adding a point to point downlink to the bond, we neglected to reset
the bond's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to the bonding.
To address this issue, let's reset the bond's flags for P2P interfaces.
Before fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000
link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188::
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/gre6 2006:70:10::1 brd 2006:70:10::2
inet6 fe80::200:ff:fe00:0/64 scope link
valid_lft forever preferred_lft forever
After fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000
link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9::
8: bond0: <POINTOPOINT,NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/gre6 2006:70:10::1 peer 2006:70:10::2
inet6 fe80::1/64 scope link
valid_lft forever preferred_lft forever
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NTLMSSP_NEGOTIATE_VERSION flag only needs to be sent during
the NTLMSSP NEGOTIATE (not the AUTH) request, so filter it out for
NTLMSSP AUTH requests. See MS-NLMP 2.2.1.3
This fixes a problem found by the gssntlmssp server.
Link: https://github.com/gssapi/gss-ntlmssp/issues/95
Fixes: 52d005337b2c ("smb3: send NTLMSSP version information")
Acked-by: Roy Shterman <roy.shterman@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We need to specify charset, like "iocharset=utf-8", in mount options for
Chinese path if the nls_default don't support it, such as iso8859-1, the
default value for CONFIG_NLS_DEFAULT.
But now in reconnection the nls_default is used, instead of the one we
specified and used in mount, and this can lead to mount failure.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
load_nls() take a char * parameter, use it to find nls module in list or
construct the module name to load it.
This change make load_nls() take a const parameter, so we don't need do
some cast like this:
ses->local_nls = load_nls((char *)ctx->local_nls->charset);
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the symbolic names for zone conditions in the blkzoned.h header
file.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Fixes: 6a0cb1bc106f ("block: Implement support for zoned block devices")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230706201422.3987341-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-21 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Wang Ming corrects an error check on i40e.
Jake unlocks crit_lock on allocation failure to prevent deadlock and
stops re-enabling of interrupts when it's not intended for iavf.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED
iavf: fix potential deadlock on allocation failure
i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()
====================
Link: https://lore.kernel.org/r/20230721155812.1292752-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmS+jLwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6LMiB/wPcSaPk8b/Tkpwnf0R0yP36tP7YS0V
7SZldc2KRYeQb0Lk1gPTzWRGmddKl2kORh3Y3JkfanKNsiNfhYgUrxeLDkbeDolo
n1Io6fjhK1DzM5cx6Sn+spPpl4QGWV3YQ8PAJm6FjsH5+M5LPzZIK0GGakESCxU7
YDbq3wqglKeI2h1Ae3sQeBd7k26KQXupHfoCyYgUlmOF/u2PuKP0xmn2674QdlvR
m99iE5kqF/HKlrg1OlcOTa7KzknOYPjsVpJ1nTcqxKmUDEYq+niLflBV9Gw8VEyO
Y1naqUJz3TavDVgVIGkjUJEd/+sw3yI2LK7g3+DhugXvMLrqIPa6kmrM
=ayq3
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-07-24
The first patch is by me and adds a missing set of CAN state to
CAN_STATE_STOPPED on close in the gs_usb driver.
The last patch is by Eric Dumazet and fixes a lockdep issue in the CAN
raw protocol.
* tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: raw: fix lockdep issue in raw_release()
can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED
====================
Link: https://lore.kernel.org/r/20230724150141.766047-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix ethtool FDIR logic to not use memory after its release.
In the ice_ethtool_fdir.c file there are 2 spots where code can
refer to pointers which may be missing.
In the ice_cfg_fdir_xtrct_seq() function seg may be freed but
even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)).
In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input
may first fail to be added via ice_fdir_update_list_entry() but then
may be deleted by ice_fdir_update_list_entry.
Terminate in both cases when the returned value of the previous
operation is other than 0, free memory and don't use it anymore.
Reported-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423
Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For both IPv4 and IPv6 incoming TCP connections are tracked in a hash
table with a hash over the source & destination addresses and ports.
However, the IPv6 hash is insufficient and can lead to a high rate of
collisions.
The IPv6 hash used an XOR to fit everything into the 96 bits for the
fast jenkins hash, meaning it is possible for an external entity to
ensure the hash collides, thus falling back to a linear search in the
bucket, which is slow.
We take the approach of hash the full length of IPv6 address in
__ipv6_addr_jhash() so that all users can benefit from a more secure
version.
While this may look like it adds overhead, the reality of modern CPUs
means that this is unmeasurable in real world scenarios.
In simulating with llvm-mca, the increase in cycles for the hashing
code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9
on Nehalem (base of ~173).
In commit dd6d2910c5e0 ("netfilter: conntrack: switch to siphash")
netfilter switched from a jenkins hash to a siphash, but even the faster
hsiphash is a more significant overhead (~20-30%) in some preliminary
testing. So, in this patch, we keep to the more conservative approach to
ensure we don't add much overhead per SYN.
In testing, this results in a consistently even spread across the
connection buckets. In both testing and real-world scenarios, we have
not found any measurable performance impact.
Fixes: 08dcdbf6a7b9 ("ipv6: use a stronger hash for tcp")
Signed-off-by: Stewart Smith <trawets@amazon.com>
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the implementation of XDP of FEC driver, the XDP path
shares the transmit queues with the kernel network stack, so it is
possible to lead to a tx timeout event when XDP uses the tx queue
pretty much exclusively. And this event will cause the reset of the
FEC hardware.
To avoid timeout in this case, we use the txq_trans_cond_update()
interface to update txq->trans_start to jiffies so that watchdog
won't generate a transmit timeout warning.
Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230721083559.2857312-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
currently on 6.4 net/main:
# ip link add dummy1 type dummy
# echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr
# ip link set dummy1 up
# ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic
valid_lft 604800sec preferred_lft 86172sec
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1
(can wait a few seconds if you want to, the above delete isn't [directly] the problem)
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic
valid_lft 604797sec preferred_lft 86169sec
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
This patch prevents this new 'global temporary dynamic' address from being
created by the deletion of the related (same subnet prefix) 'mngtmpaddr'
(which is triggered by there already being no temporary addresses).
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: 53bd67491537 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses")
Reported-by: Xiao Ma <xiaom@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230720160022.1887942-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in atl1e_tso_csum, it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().
Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230720144219.39285-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in atl1_tso(), it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().
Fixes: 401c0aabec4b ("atl1: simplify tx packet descriptor")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230722142511.12448-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Single fix for a potential regression over a misunderstanding of the
blk_get_queue() api.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZL7MmSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishS5CAP9nqusg
7fN/2nO7MdZNeZwHvNVmgBOVO7z4vPypCTN8oAEAvMQUcXjQFUuIm4qJalF0UPKv
GxQjWcd2Pm7rYI6i/9Y=
=/KLr
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix for a potential regression over a misunderstanding of the
blk_get_queue() api"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: Fix checking return value of blk_get_queue()
The WM8904_ADC_TEST_0 register is modified as part of updating the OSR
controls but does not have a cache default, leading to errors when we try
to modify these controls in cache only mode with no prior read:
wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16
Add a read of the register to probe() to fill the cache and avoid both the
error messages and the misconfiguration of the chip which will result.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Dmytro Maluka <dmy@semihalf.com>:
This series includes 2 patches related to (but not fixing) the following
I2C failure which occurs sometimes during system suspend or resume and
indicates a problem with a spurious DA7219 interrupt:
[ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended
[ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440
...
[ 355.876462] Call Trace:
[ 355.876468] <TASK>
[ 355.876475] ? update_load_avg+0x1b3/0x615
[ 355.876484] __i2c_transfer+0x101/0x1d8
[ 355.876494] i2c_transfer+0x74/0x10d
[ 355.876504] regmap_i2c_read+0x6a/0x9c
[ 355.876513] _regmap_raw_read+0x179/0x223
[ 355.876521] regmap_raw_read+0x1e1/0x28e
[ 355.876527] regmap_bulk_read+0x17d/0x1ba
[ 355.876532] ? __wake_up+0xed/0x1bb
[ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184]
[ 355.876556] irq_thread+0x13c/0x231
[ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f
[ 355.876570] ? irq_thread_fn+0x4d/0x4d
[ 355.876576] kthread+0x13a/0x152
[ 355.876581] ? synchronize_irq+0xc3/0xc3
[ 355.876587] ? kthread_blkcg+0x31/0x31
[ 355.876592] ret_from_fork+0x1f/0x30
[ 355.876601] </TASK>
This log shows that DA7219 AAD interrupt handler da7219_aad_irq_thread()
is unexpectedly running when DA7219 is suspended and should not generate
interrupts. As a result, the IRQ handler is trying to read AAD IRQ event
status over I2C and is hitting the I2C driver "Transfer while suspended"
failure.
Patch #1 adds synchronize_irq() when suspending DA7219, to prevent the
IRQ handler from running after suspending if there is a pending IRQ
generated before suspending. With this patch the above failure is still
reproducible, so this patch does not fix any real observed issue so far,
but at least is useful for confirming that the above issue is not caused
by a pending IRQ but rather looks like a DA7219 hardware issue with an
unexpectedly generated IRQ.
Patch #2 does not fix the above issue either, but it prevents its
potentially harmful side effects. With the existing code, if the issue
occurs and the IRQ handler fails to read the AAD IRQ events status over
I2C, it does not check that and tries to use the garbage uninitialized
value of the events status, potentially reporting bogus events. This
patch fixes that by adding missing error checking.
In fact I'm sending these patches not only to submit them for review but
also to ask Renesas folks for any hints on a possible cause of the
described DA7219 issue (AAD interrupts spuriously firing after jack
detection is already disabled) or how to debug it further.
The DASD driver has certain types of requests that might be rejected by
the storage server or z/VM because they are not supported. Since the
missing support of the command is not a real issue there is no user
visible kernel error message for this.
For copy pair setups there is a specific error that IO is not allowed on
secondary devices. This error case is explicitly handled and an error
message is printed.
The code checking for the error did use a bitwise 'and' that is used to
check for specific bits. But in this case the whole sense byte has to
match.
This leads to the problem that the copy pair related error message is
erroneously printed for other error cases that are usually not reported.
This might heavily confuse users and lead to follow on actions that might
disrupt application processing.
Fix by checking the sense byte for the exact value and not single bits.
Cc: stable@vger.kernel.org # 6.1+
Fixes: 1fca631a1185 ("s390/dasd: suppress generic error messages for PPRC secondary devices")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The DASD device driver has a function to requeue requests to the
blocklayer.
This function is used in various cases when basic settings for the device
have to be changed like High Performance Ficon related parameters or copy
pair settings.
The functions iterates over the device->ccw_queue and also removes the
requests from the block->ccw_queue.
In case the device is started on an alias device instead of the base
device it might be removed from the block->ccw_queue without having it
canceled properly before. This might lead to a hanging device since the
request is no longer on a queue and can not be handled properly.
Fix by iterating over the block->ccw_queue instead of the
device->ccw_queue. This will take care of all blocklayer related requests
and handle them on all associated DASD devices.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a DASD request fails an error recovery procedure (ERP) request might
be built as a copy of the original request to do error recovery.
The ERP request gets a number of retries assigned.
This number is always 256 no matter what other value might have been set
for the original request. This is not what is expected when a user
specifies a certain amount of retries for the device via sysfs.
Correctly use the number of retries of the original request for ERP
requests.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Quiesce and resume are functions that tell the DASD driver to stop/resume
issuing I/Os to a specific DASD.
On resume dasd_schedule_block_bh() is called to kick handling of IO
requests again. This does unfortunately not cover internal requests which
are used for path verification for example.
This could lead to a hanging device when a path event or anything else
that triggers internal requests occurs on a quiesced device.
Fix by also calling dasd_schedule_device_bh() which triggers handling of
internal requests on resume.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit made all cqring waits marked as iowait, as a way to
improve performance for short schedules with pending IO. However, for
use cases that have a special reaper thread that does nothing but
wait on events on the ring, this causes a cosmetic issue where we
know have one core marked as being "busy" with 100% iowait.
While this isn't a grave issue, it is confusing to users. Rather than
always mark us as being in iowait, gate setting of current->in_iowait
to 1 by whether or not the waiting task has pending requests.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/io-uring/CAMEGJJ2RxopfNQ7GNLhr7X9=bHXKo+G5OOe0LUq=+UgLXsv1Xg@mail.gmail.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217699
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217700
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Phil Elwell <phil@raspberrypi.com>
Tested-by: Andres Freund <andres@anarazel.de>
Fixes: 8a796565cec3 ("io_uring: Use io_schedule* in cqring wait")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The pidfd_getfd() system call allows a caller with ptrace_may_access()
abilities on another process to steal a file descriptor from this
process. This system call is used by debuggers, container runtimes,
system call supervisors, networking proxies etc. So while it is a
special interest system call it is used in common tools.
That ability ends up breaking our long-time optimization in fdget_pos(),
which "knew" that if we had exclusive access to the file descriptor
nobody else could access it, and we didn't need the lock for the file
position.
That check for file_count(file) was always fairly subtle - it depended
on __fdget() not incrementing the file count for single-threaded
processes and thus included that as part of the rule - but it did mean
that we didn't need to take the lock in all those traditional unix
process contexts.
So it's sad to see this go, and I'd love to have some way to re-instate
the optimization. At the same time, the lock obviously isn't ever
contended in the case we optimized, so all we were optimizing away is
the atomics and the cacheline dirtying. Let's see if anybody even
notices that the optimization is gone.
Link: https://lore.kernel.org/linux-fsdevel/20230724-vfs-fdget_pos-v1-1-a4abfd7103f3@kernel.org/
Fixes: 8649c322f75c ("pid: Implement pidfd_getfd syscall")
Cc: stable@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f8ad6018ce3c065a ("perf pmu: Remove duplication around
EVENT_SOURCE_DEVICE_PATH") uses sysfs__read_ull() to read a full sysfs
path, which will never succeeds as it already comes with the sysfs mount
point in it, which sysfs__read_ull() will add again.
Fix it by reading the file using filename__read_ull(), that will not add
the sysfs mount point.
Fixes: f8ad6018ce3c065a ("perf pmu: Remove duplication around EVENT_SOURCE_DEVICE_PATH")
Signed-off-by: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Tested-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/ZL4G7rWXkfv-Ectq@B-Q60VQ05P-2326.local
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At btrfs_wait_for_commit() we wait for a transaction to finish and then
always return 0 (success) without checking if it was aborted, in which
case the transaction didn't happen due to some critical error. Fix this
by checking if the transaction was aborted.
Fixes: 462045928bda ("Btrfs: add START_SYNC, WAIT_SYNC ioctls")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At add_new_free_space() we have these BUG_ON()'s that are there to deal
with any failure to add free space to the in memory free space cache.
Such failures are mostly -ENOMEM that should be very rare. However there's
no need to have these BUG_ON()'s, we can just return any error to the
caller and all callers and their upper call chain are already dealing with
errors.
So just make add_new_free_space() return any errors, while removing the
BUG_ON()'s, and returning the total amount of added free space to an
optional u64 pointer argument.
Reported-by: syzbot+3ba856e07b7127889d8c@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000e9cb8305ff4e8327@google.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
