IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 14bb1e8c8d ]
Recently, I frequently hit the following test failure:
[root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
test_lookup_update:PASS:skel_open 0 nsec
[...]
test_lookup_update:PASS:sync_rcu 0 nsec
test_lookup_update:FAIL:map1_leak inner_map1 leaked!
#33/1 btf_map_in_map/lookup_update:FAIL
#33 btf_map_in_map:FAIL
In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.
But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.
By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f803bcf920 ]
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:
# ip gre none gso
# encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
# test basic connectivity
# Ncat: Connection refused.
The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2114e83381 upstream.
The expression "source ../lib.sh" added to net/forwarding/lib.sh in commit
25ae948b44 ("selftests/net: add lib.sh") does not work for tests outside
net/forwarding which source net/forwarding/lib.sh (1). It also does not
work in some cases where only a subset of tests are exported (2).
Avoid the problems mentioned above by replacing the faulty expression with
a copy of the content from net/lib.sh which is used by files under
net/forwarding.
A more thorough solution which avoids duplicating content between
net/lib.sh and net/forwarding/lib.sh has been posted here:
https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/
The approach in the current patch is a stopgap solution to avoid submitting
large changes at the eleventh hour of this development cycle.
Example of problem 1)
tools/testing/selftests/drivers/net/bonding$ ./dev_addr_lists.sh
./net_forwarding_lib.sh: line 41: ../lib.sh: No such file or directory
TEST: bonding cleanup mode active-backup [ OK ]
TEST: bonding cleanup mode 802.3ad [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond down) [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond up) [ OK ]
An error message is printed but since the test does not use functions from
net/lib.sh, the test results are not affected.
Example of problem 2)
tools/testing/selftests$ make install TARGETS="net/forwarding"
tools/testing/selftests$ cd kselftest_install/net/forwarding/
tools/testing/selftests/kselftest_install/net/forwarding$ ./pedit_ip.sh veth{0..3}
lib.sh: line 41: ../lib.sh: No such file or directory
TEST: ping [ OK ]
TEST: ping6 [ OK ]
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
In this case, the test results are affected.
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240104141109.100672-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25ae948b44 upstream.
Add a lib.sh for net selftests. This file can be used to define commonly
used variables and functions. Some commonly used functions can be moved
from forwarding/lib.sh to this lib file. e.g. busywait().
Add function setup_ns() for user to create unique namespaces with given
prefix name.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[PHLin: add lib.sh to TEST_FILES directly as we already have upstream
commit 06efafd8 landed in 6.6.y]
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a40e5e4dd0 upstream.
When copying timerlat auto-analysis from a terminal to some web pages or
chats, the \t are being replaced with a single ' ' or ' ', breaking
the output.
For example:
## CPU 3 hit stop tracing, analyzing it ##
IRQ handler delay: 1.30 us (0.11 %)
IRQ latency: 1.90 us
Timerlat IRQ duration: 3.00 us (0.24 %)
Blocking thread: 1223.16 us (99.00 %)
insync:4048 1223.16 us
IRQ interference 4.93 us (0.40 %)
local_timer:236 4.93 us
------------------------------------------------------------------------
Thread latency: 1235.47 us (100%)
Replace \t with spaces to avoid this problem.
Link: https://lkml.kernel.org/r/ec7ed2b2809c22ab0dfc8eb7c805ab9cddc4254a.1713968967.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Fixes: 27e348b221 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f0769331a upstream.
Instead of printing three times the same output, print it only once,
reducing lines and being sure that all no values have the same length.
It also fixes an extra '\n' when running the with kernel threads, like
here:
=============== %< ==============
Timer Latency
0 00:00:01 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
2 #0 | - - - - | 161 161 161 161
3 #0 | - - - - | 161 161 161 161
8 #1 | 54 54 54 54 | - - - -'\n'
---------------|----------------------------------------|---------------------------------------
ALL #1 e0 | 54 54 54 | 161 161 161
=============== %< ==============
This '\n' should have been removed with the user-space support that
added another '\n' if not running with kernel threads.
Link: https://lkml.kernel.org/r/0a4d8085e7cd706733a5dc10a81ca38b82bd4992.1713968967.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Fixes: cdca4f4e5e ("rtla/timerlat_top: Add timerlat user-space support")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23a4b108ac upstream.
The kprobe_eventname.tc test checks if a function with .isra. can have a
kprobe attached to it. It loops through the kallsyms file for all the
functions that have the .isra. name, and checks if it exists in the
available_filter_functions file, and if it does, it uses it to attach a
kprobe to it.
The issue is that kprobes can not attach to functions that are listed more
than once in available_filter_functions. With the latest kernel, the
function that is found is: rapl_event_update.isra.0
# grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions
rapl_event_update.isra.0
rapl_event_update.isra.0
It is listed twice. This causes the attached kprobe to it to fail which in
turn fails the test. Instead of just picking the function function that is
found in available_filter_functions, pick the first one that is listed
only once in available_filter_functions.
Cc: stable@vger.kernel.org
Fixes: 604e354823 ("selftests/ftrace: Select an existing function in kprobe_eventname test")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40eec1795c upstream.
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a09788c1a upstream.
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f42bdf59b ]
Commit eb50d0f250 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6c3c83db1 ]
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat`
event for defining eprobe on it. Since this `syscalls` events depend on
CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail.
Add the event file to `required` line so that the test will return
`unsupported` result.
Fixes: 297e1dcdca ("selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d555105271 ]
tools/testing/cxl/test/mem.c uses vmalloc() and vfree() but does not
include linux/vmalloc.h. Kernel v6.10 made changes that causes the
currently included headers not depend on vmalloc.h and therefore
mem.c can no longer compile. Add linux/vmalloc.h to fix compile
issue.
CC [M] tools/testing/cxl/test/mem.o
tools/testing/cxl/test/mem.c: In function ‘label_area_release’:
tools/testing/cxl/test/mem.c:1428:9: error: implicit declaration of function ‘vfree’; did you mean ‘kvfree’? [-Werror=implicit-function-declaration]
1428 | vfree(lsa);
| ^~~~~
| kvfree
tools/testing/cxl/test/mem.c: In function ‘cxl_mock_mem_probe’:
tools/testing/cxl/test/mem.c:1466:22: error: implicit declaration of function ‘vmalloc’; did you mean ‘kmalloc’? [-Werror=implicit-function-declaration]
1466 | mdata->lsa = vmalloc(LSA_SIZE);
| ^~~~~~~
| kmalloc
Fixes: 7d3eb23c4c ("tools/testing/cxl: Introduce a mock memory device + driver")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20240528225551.1025977-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4202e66a4 ]
Patch series "Fixes for compaction_test", v2.
The compaction_test memory selftest introduces fragmentation in memory
and then tries to allocate as many hugepages as possible. This series
addresses some problems.
On Aarch64, if nr_hugepages == 0, then the test trivially succeeds since
compaction_index becomes 0, which is less than 3, due to no division by
zero exception being raised. We fix that by checking for division by
zero.
Secondly, correctly set the number of hugepages to zero before trying
to set a large number of them.
Now, consider a situation in which, at the start of the test, a non-zero
number of hugepages have been already set (while running the entire
selftests/mm suite, or manually by the admin). The test operates on 80%
of memory to avoid OOM-killer invocation, and because some memory is
already blocked by hugepages, it would increase the chance of OOM-killing.
Also, since mem_free used in check_compaction() is the value before we
set nr_hugepages to zero, the chance that the compaction_index will
be small is very high if the preset nr_hugepages was high, leading to a
bogus test success.
This patch (of 3):
Currently, if at runtime we are not able to allocate a huge page, the test
will trivially pass on Aarch64 due to no exception being raised on
division by zero while computing compaction_index. Fix that by checking
for nr_hugepages == 0. Anyways, in general, avoid a division by zero by
exiting the program beforehand. While at it, fix a typo, and handle the
case where the number of hugepages may overflow an integer.
Link: https://lkml.kernel.org/r/20240521074358.675031-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20240521074358.675031-2-dev.jain@arm.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b7568c49 ]
Every test result report in the compaction test prints a distinct log
messae, and some of the reports print a name that varies at runtime. This
causes problems for automation since a lot of automation software uses the
printed string as the name of the test, if the name varies from run to run
and from pass to fail then the automation software can't identify that a
test changed result or that the same tests are being run.
Refactor the logging to use a consistent name when printing the result of
the test, printing the existing messages as diagnostic information instead
so they are still available for people trying to interpret the results.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-2-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: d4202e66a4 ("selftests/mm: compaction_test: fix bogus test success on Aarch64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a71d0908e3 upstream.
The helper waiting for a listener port can match any socket whose
hexadecimal representation of source or destination addresses
matches that of the given port.
Additionally, any socket state is accepted.
All the above can let the helper return successfully before the
relevant listener is actually ready, with unexpected results.
So far I could not find any related failure in the netdev CI, but
the next patch is going to make the critical event more easily
reproducible.
Address the issue matching the port hex only vs the relevant socket
field and additionally checking the socket state for TCP sockets.
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01b05fc0e5 upstream.
On short runs it is possible to get no samples on a cpu, like this:
# rtla timerlat hist -u -T50
Index IRQ-001 Thr-001 Usr-001 IRQ-002 Thr-002 Usr-002
2 1 0 0 0 0 0
33 0 1 0 0 0 0
36 0 0 1 0 0 0
49 0 0 0 1 0 0
52 0 0 0 0 1 0
over: 0 0 0 0 0 0
count: 1 1 1 1 1 0
min: 2 33 36 49 52 18446744073709551615
avg: 2 33 36 49 52 -
max: 2 33 36 49 52 0
rtla timerlat hit stop tracing
IRQ handler delay: (exit from idle) 48.21 us (91.09 %)
IRQ latency: 49.11 us
Timerlat IRQ duration: 2.17 us (4.09 %)
Blocking thread: 1.01 us (1.90 %)
swapper/2:0 1.01 us
------------------------------------------------------------------------
Thread latency: 52.93 us (100%)
Max timerlat IRQ latency from idle: 49.11 us in cpu 2
Note, the value 18446744073709551615 is the same as ~0.
Fix this by reporting no results for the min, avg and max if the count
is 0.
Link: https://lkml.kernel.org/r/20240510190318.44295-1-jkacur@redhat.com
Cc: stable@vger.kernel.org
Fixes: 1eeb6328e8 ("rtla/timerlat: Add timerlat hist mode")
Suggested-by: Daniel Bristot de Oliveria <bristot@kernel.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Benjamin Poirier <bpoirier@nvidia.com>
commit 06efafd860 upstream.
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Move those utility scripts to
TEST_FILES.
Fixes: 1751eb42dd ("selftests: net: use TEST_PROGS_EXTENDED")
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Fixes: b99ac18411 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile")
Fixes: f5173fe3e1 ("selftests: net: included needed helper in the install targets")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-5-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[PHLin: ignore the non-existing lib.sh]
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Lucas Karpinski <lkarpins@redhat.com>
commit 3bdd9fd29c upstream.
The sockets used by udpgso_bench_tx aren't always ready when
udpgso_bench_tx transmits packets. This issue is more prevalent in -rt
kernels, but can occur in both. Replace the hacky sleep calls with a
function that checks whether the ports in the namespace are ready for
use.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Lucas Karpinski <lkarpins@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[PHLin: context adjustment for the differences in BPF_FILE]
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fb66df20a7 ]
It is possible for syzbot to side-step the restriction imposed by the
blamed commit in the Fixes: tag, because the taprio UAPI permits a
cycle-time different from (and potentially shorter than) the sum of
entry intervals.
We need one more restriction, which is that the cycle time itself must
be larger than N * ETH_ZLEN bit times, where N is the number of schedule
entries. This restriction needs to apply regardless of whether the cycle
time came from the user or was the implicit, auto-calculated value, so
we move the existing "cycle == 0" check outside the "if "(!new->cycle_time)"
branch. This way covers both conditions and scenarios.
Add a selftest which illustrates the issue triggered by syzbot.
Fixes: b5b73b26b3 ("taprio: Fix allowing too small intervals")
Reported-by: syzbot+a7d2b1d5d1af83035567@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000007d66bc06196e7c66@google.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240527153955.553333-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e634134180 ]
In commit b5b73b26b3 ("taprio: Fix allowing too small intervals"), a
comparison of user input against length_to_duration(q, ETH_ZLEN) was
introduced, to avoid RCU stalls due to frequent hrtimers.
The implementation of length_to_duration() depends on q->picos_per_byte
being set for the link speed. The blamed commit in the Fixes: tag has
moved this too late, so the checks introduced above are ineffective.
The q->picos_per_byte is zero at parse_taprio_schedule() ->
parse_sched_list() -> parse_sched_entry() -> fill_sched_entry() time.
Move the taprio_set_picos_per_byte() call as one of the first things in
taprio_change(), before the bulk of the netlink attribute parsing is
done. That's because it is needed there.
Add a selftest to make sure the issue doesn't get reintroduced.
Fixes: 09dbdf28f9 ("net/sched: taprio: fix calculation of maximum gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240527153955.553333-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9109853a38 ]
'delay 1' in tc-netem is confusing, not sure if it's a delay of 1 second or
1 millisecond. This patch explicitly adds millisecond units to make these
commands clearer.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 38af56e666 ("selftests: mptcp: join: mark 'fail' tests as flaky")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc73a6577a ]
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel.
A first analysis shown that the transfer can be slowed down when there
are some re-injections at the MPTCP level. Such re-injections can of
course happen, and disturb the transfer, but it looks strange to have
them in this lab. That could be caused by the kernel having access to
less CPU cycles -- e.g. when other activities are executed in parallel
-- or by a misinterpretation on the MPTCP packet scheduler side.
While this is being investigated, the tests are marked as flaky not to
create noises in other CIs.
Fixes: 219d04992b ("mptcp: push pending frames when subflow has free space")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/475
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-2-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44382b3ed6 ]
err is a 32-bit integer, but elf_update returns an off_t, which is 64-bit
at least on 64-bit platforms. If symbols_patch is called on a binary between
2-4GB in size, the result will be negative when cast to a 32-bit integer,
which the code assumes means an error occurred. This can wrongly trigger
build failures when building very large kernel images.
Fixes: fbbb68de80 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240514070931.199694-1-friedrich.vock@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc563e7498 ]
The amt.sh requires smcrouted for multicasting routing.
So, it starts smcrouted before forwarding tests.
It must be stopped after all tests, but it isn't.
To fix this issue, it kills smcrouted in the cleanup logic.
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7228a58d9 ]
The hashchk tests want to verify that the hash key is changed over exec.
It does so by calculating hashes at the same address across an exec.
This is made simpler by disabling PIE functionality, so we can
re-execute ourselves and be using the same addresses in the child.
While -fno-pie is already added, -no-pie is also required.
Fixes: bdb07f35a5 ("selftests/powerpc/dexcr: Add hashst/hashchk test")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6dd7a923 ]
Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.
Consider:
$ perf stat -e inst_retired.any true
The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.
This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.
For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.
Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67ee8e71da ]
Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.
An example of the output:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
Committer notes:
Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7093882067 ]
When dumping a perf_event_attr, use pmus to find the PMU and its name
by the type number. This allows dynamically added PMUs to be described.
Before:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24
size 136
config 0x20ff
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
After:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
However, it also means that when we have a PMU name we prefer it to a
hard coded name:
Before:
$ perf stat -vv -e faults true
...
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x2 (PERF_COUNT_SW_PAGE_FAULTS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
After:
$ perf stat -vv -e faults true
...
perf_event_attr:
type 1 (software)
size 136
config 0x2 (PERF_COUNT_SW_PAGE_FAULTS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
It feels more consistent to do this, rather than only prefer a PMU
name when a hard coded name isn't available.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d0f5f456a ]
pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, so move it to pmus.c
At the same time rename it to perf_pmus__find_core_pmu() to match the
naming convention in this file.
list_prepare_entry() can't be used in perf_pmus__scan_core() anymore now
that it's called from the same compilation unit. This is with -O2
(specifically -O1 -ftree-vrp -finline-functions
-finline-small-functions) which allow the bounds of the array
access to be determined at compile time. list_prepare_entry() subtracts
the offset of the 'list' member in struct perf_pmu from &core_pmus,
which isn't a struct perf_pmu. The compiler sees that pmu results in
&core_pmus - 8 and refuses to compile. At runtime this works because
list_for_each_entry_continue() always adds the offset back again before
dereferencing ->next, but it's technically undefined behavior. With
-fsanitize=undefined an additional warning is generated.
Using list_first_entry_or_null() to get the first entry here avoids
doing &core_pmus - 8 but has the same result and fixes both the compile
warning and the undefined behavior warning. There are other uses of
list_prepare_entry() in pmus.c, but the compiler doesn't seem to be
able to see that they can also be called with &core_pmus, so I won't
change any at this time.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230913153355.138331-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 193a9e3020 ]
On an Intel tigerlake laptop a metric like:
{
"BriefDescription": "Test",
"MetricExpr": "imc_free_running@data_read@ + imc_free_running@data_write@",
"MetricGroup": "Test",
"MetricName": "Test",
"ScaleUnit": "6.103515625e-5MiB"
},
Will have 4 events:
uncore_imc_free_running_0/data_read/
uncore_imc_free_running_0/data_write/
uncore_imc_free_running_1/data_read/
uncore_imc_free_running_1/data_write/
If aggregration is disabled with metric-only 2 column headers are
needed:
$ perf stat -M test --metric-only -A -a sleep 1
Performance counter stats for 'system wide':
MiB Test MiB Test
CPU0 1821.0 1820.5
But when not, the counts aggregated in the metric leader and only 1
column should be shown:
$ perf stat -M test --metric-only -a sleep 1
Performance counter stats for 'system wide':
MiB Test
5909.4
1.001258915 seconds time elapsed
Achieve this by skipping events that aren't metric leaders when
printing column headers and aggregation isn't disabled.
The bug is long standing, the fixes tag is set to a refactor as that
is as far back as is reasonable to backport.
Fixes: 088519f318 ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaige Ye <ye@kaige.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240510051309.2452468-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
