IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pull scheduler fixes from Ingo Molnar:
"Fix two scheduler topology bugs/oversights on Juno r0 2+4 big.LITTLE
systems"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/topology: Allow sched_asym_cpucapacity to be disabled
sched/topology: Don't try to build empty sched domains
Pull perf fixes from Ingo Molnar:
"Misc fixes: an ABI fix for a reserved field, AMD IBS fixes, an Intel
uncore PMU driver fix and a header typo fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/headers: Fix spelling s/EACCESS/EACCES/, s/privilidge/privilege/
perf/x86/uncore: Fix event group support
perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h)
perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity
perf/core: Start rejecting the syscall with attr.__reserved_2 set
Pull EFI fixes from Ingo Molnar:
"Various fixes all over the map: prevent boot crashes on HyperV,
classify UEFI randomness as bootloader randomness, fix EFI boot for
the Raspberry Pi2, fix efi_test permissions, etc"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/efi_test: Lock down /dev/efi_test and require CAP_SYS_ADMIN
x86, efi: Never relocate kernel below lowest acceptable address
efi: libstub/arm: Account for firmware reserved memory at the base of RAM
efi/random: Treat EFI_RNG_PROTOCOL output as bootloader randomness
efi/tpm: Return -EINVAL when determining tpm final events log size fails
efi: Make CONFIG_EFI_RCI2_TABLE selectable on x86 only
Kalle Valo says:
====================
wireless-drivers fixes for 5.4
Third set of fixes for 5.4. Most of them are for iwlwifi but important
fixes also for rtlwifi and mt76, the overflow fix for rtlwifi being
most important.
iwlwifi
* fix merge damage on earlier patch
* various fixes to device id handling
* fix scan config command handling which caused firmware asserts
rtlwifi
* fix overflow on P2P IE handling
* don't deliver too small frames to mac80211
mt76
* disable PCIE_ASPM
* fix buffer DMA unmap on certain cases
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov says:
====================
net: bridge: minor followup optimizations
After the converted flags to bitops we can take advantage of the flags
assignment and remove one test and three atomic bitops from the learning
paths (patch 01 and patch 02), patch 03 restores the unlikely() when taking
over HW learned entries.
v2: a clean export of the latest set version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Taking over hw-learned entries is not a likely scenario so restore the
unlikely() use for the case of SW taking over externally learned
entries.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we setup the fdb flags prior to calling fdb_create() we can avoid
two atomic bitops when learning a new entry.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we modify br_fdb_update() to take flags directly we can get rid of
one test and one atomic bitop in the learning path.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The remove misses to disable and unprepare priv->macclk like what is done
when probe fails.
Add the missed call in remove.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull arm64 fixes from Will Deacon:
"These are almost exclusively related to CPU errata in CPUs from
Broadcom and Qualcomm where the workarounds were either not being
enabled when they should have been or enabled when they shouldn't have
been.
The only "interesting" fix is ensuring that writeable, shared mappings
are initially mapped as clean since we inadvertently broke the logic
back in v4.14 and then noticed the problem via code inspection the
other day.
The only critical issue we have outstanding is a sporadic NULL
dereference in the scheduler, which doesn't appear to be
arm64-specific and PeterZ is tearing his hair out over it at the
moment.
Summary:
- Enable CPU errata workarounds for Broadcom Brahma-B53
- Enable CPU errata workarounds for Qualcomm Hydra/Kryo CPUs
- Fix initial dirty status of writeable, shared mappings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: apply ARM64_ERRATUM_843419 workaround for Brahma-B53 core
arm64: Brahma-B53 is SSB and spectre v2 safe
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core
arm64: cpufeature: Enable Qualcomm Falkor errata 1009 for Kryo
arm64: cpufeature: Enable Qualcomm Falkor/Kryo errata 1003
arm64: Ensure VM_WRITE|VM_SHARED ptes are clean by default
Pull kvm fixes from Paolo Bonzini:
"generic:
- fix memory leak on failure to create VM
x86:
- fix MMU corner case with AMD nested paging disabled"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active
kvm: call kvm_arch_destroy_vm if vm creation fails
kvm: Allocate memslots and buses before calling kvm_arch_init_vm
Pull drm fixes from Dave Airlie:
"This is the regular drm fixes pull request for 5.4-rc6. It's a bit
larger than I'd like but then last week was quieter than usual.
The main fixes are amdgpu, and the two bigger area are navi fixes
which are the newest GPU range so still getting actively fixed up, but
also a bunch of clang stack alignment fixes (as amdgpu uses double in
some places).
Otherwise it's all fairly run of the mill fixes, i915, panfrost,
etnaviv, v3d and radeon, along with a core scheduler fix.
Summary:
amdgpu:
- clang alignment fixes
- Updated golden settings
- navi: gpuvm, sdma and display fixes
- Freesync fix
- Gamma fix for DCN
- DP dongle detection fix
- vega10: Fix for undervolting
radeon:
- reenable kexec fix for ppc
scheduler:
- set an error if hw job failed
i915:
- fix PCH reference clock for HSW/BDW
- TGL display PLL doc fix
panfrost:
- warning fix
- runtime pm fix
- bad pointer dereference fix
v3d:
- memleak fix
etnaviv:
- memory corruption fix
- deadlock fix
- reintroduce lost debug message"
* tag 'drm-fixes-2019-11-01' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amdgpu: enable -msse2 for GCC 7.1+ users
drm/amdgpu: fix stack alignment ABI mismatch for GCC 7.1+
drm/amdgpu: fix stack alignment ABI mismatch for Clang
drm/radeon: Fix EEH during kexec
drm/amdgpu/gmc10: properly set BANK_SELECT and FRAGMENT_SIZE
drm/amdgpu/powerplay/vega10: allow undervolting in p7
dc.c:use kzalloc without test
drm/amd/display: setting the DIG_MODE to the correct value.
drm/amd/display: Passive DP->HDMI dongle detection fix
drm/amd/display: add 50us buffer as WA for pstate switch in active
drm/amd/display: Allow inverted gamma
drm/amd/display: do not synchronize "drr" displays
drm/amdgpu: If amdgpu_ib_schedule fails return back the error.
drm/sched: Set error to s_fence if HW job submission failed.
drm/amdgpu/gfx10: update gfx golden settings for navi12
drm/amdgpu/gfx10: update gfx golden settings for navi14
drm/amdgpu/gfx10: update gfx golden settings
drm/amd/display: Change Navi14's DWB flag to 1
drm/amdgpu/sdma5: do not execute 0-sized IBs (v2)
drm/amdgpu: Fix SDMA hang when performing VKexample test
...
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced (mostly theoretical) issue that the requests
to confine the maximum CPU frequency coming from the platform firmware
may not be taken into account if multiple CPUs are covered by one
cpufreq policy on a system with ACPI"
* tag 'pm-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Add QoS requests for all CPUs
Pull rdma fixes from Jason Gunthorpe:
"A number of bug fixes and a regression fix:
- Various issues from static analysis in hfi1, uverbs, hns, and cxgb4
- Fix for deadlock in a case when the new auto RDMA module loading is
used
- Missing _irq notation in a prior -rc patch found by lockdep
- Fix a locking and lifetime issue in siw
- Minor functional bug fixes in cxgb4, mlx5, qedr
- Fix a regression where vlan interfaces no longer worked with RDMA
CM in some cases"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Prevent memory leaks of eq->buf_list
RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure case
RDMA/mlx5: Use irq xarray locking for mkey_table
IB/core: Avoid deadlock during netlink message handling
RDMA/nldev: Skip counter if port doesn't match
RDMA/uverbs: Prevent potential underflow
IB/core: Use rdma_read_gid_l2_fields to compare GID L2 fields
RDMA/qedr: Fix reported firmware version
RDMA/siw: free siw_base_qp in kref release routine
RDMA/iwcm: move iw_rem_ref() calls out of spinlock
iw_cxgb4: fix ECN check on the passive accept
IB/hfi1: Use a common pad buffer for 9B and 16B packets
IB/hfi1: Avoid excessive retry for TID RDMA READ request
RDMA/mlx5: Clear old rate limit when closing QP
Pull sound fixes from Takashi Iwai:
"A couple of regression fixes and a fix for mutex deadlock at
hog-unplug, as well as other device-specific fixes:
- A commit to avoid the spurious unsolicited interrupt on HD-audio
bus caused a stall at shutdown, so it's reverted now.
- The recent support of AMD/Nvidia audio component binding caused a
mutex deadlock; fixed by splitting to another mutex
- The device hot-unplug and the ALSA timer close combo may lead to
another mutex deadlock; fixed by moving put_device() calls
- Usual device-specific small quirks for HD- and USB-audio drivers
- An old error check fix in FireWire driver"
* tag 'sound-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Fix mutex deadlock at releasing card
ALSA: hda - Fix mutex deadlock in HDMI codec driver
Revert "ALSA: hda: Flush interrupts on disabling"
ALSA: bebob: Fix prototype of helper function to return negative value
ALSA: hda/realtek - Fix 2 front mics of codec 0x623
ALSA: hda/realtek - Add support for ALC623
ALSA: usb-audio: Add DSD support for Gustard U16/X26 USB Interface
A typo in nfs4_refresh_delegation_stateid() means we're leaking an
RCU lock, and always returning a value of 'false'. As the function
description states, we were always supposed to return 'true' if a
matching delegation was found.
Fixes: 12f275cdd1 ("NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the delegation is marked as being revoked, we must not use it
for cached opens.
Fixes: 869f9dfa4d ("NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_843419 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_843419 into an erratum list and use
cpucap_multi_entry_cap_matches to match our entries.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Add the Brahma-B53 CPU (all versions) to the whitelists of CPUs for the
SSB and spectre v2 mitigations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_845719 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_845719 into an erratum list.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
100BaseVG AnyLAN hasn't been useful since 1996 or so and even then
didn't sell many devices. It's unlikely any are still in use.
Move the driver to staging with the intent of removing it altogether
one day.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Updates for net-next.
This patch series adds TC Flower tunnel decap and rewrite actions in
the first 4 patches. The next 3 patches integrates the recently
added error recovery with the RDMA driver by calling the proper
hooks to stop and start.
v2: Fix pointer alignment issue in patch #1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Inform the RDMA driver to stop/start during suspend/resume. The
RDMA driver needs to stop and start just like error recovery.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Notify the RDMA driver by calling the bnxt_ulp_stop()/bnxt_ulp_start()
hooks during error recovery. The current ULP IRQ start/stop
sequence in error recovery (which is insufficient) is replaced with the
full reset sequence when we call bnxt_ulp_stop()/bnxt_ulp_start().
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We call bnxt_ulp_stop() to notify the RDMA driver that some error or
imminent reset is about to happen. After that we always call
some variants of bnxt_close().
In the next patch, we will integrate the recently added error
recovery with the RDMA driver. In response to ulp_stop, the
RDMA driver may free MSIX vectors and that will also trigger
bnxt_close(). To avoid bnxt_close() from being called twice,
we set a new flag after ulp_stop is called. If the RDMA driver
frees MSIX vectors while the new flag is set, we will not call
bnxt_close(), knowing that it will happen in due course.
With this change, we must make sure that the bnxt_close() call
after ulp_stop will reset IRQ. Modify bnxt_reset_task()
accordingly if we call ulp_stop.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The decap (VXLAN tunnel) flow rules are not getting offloaded with
upstream kernel. This is because TC block callback infrastructure has
been updated to use indirect callbacks to get offloaded rules from
other higher level devices (such as tunnels), instead of ndo_setup_tc().
Since the decap rules are applied to the tunnel devices (e.g, vxlan_sys),
the driver should register for indirect TC callback with tunnel devices
to get the rules for offloading. This patch updates the driver to
register and process indirect TC block callbacks from VXLAN tunnels.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provides support for modifying L3/L4 Header parameters to support NAT.
Sets the appropriate fields/bits in cfa_flow_alloc cmd.
Sample cmd for offloading an IPv4 flow with SNAT:
ovs-ofctl add-flow ovsbr0 "ip,nw_src=192.168.201.44 \
actions=mod_nw_src:203.31.220.144,output:p7p1"
Replace 'nw_src' with 'nw_dst' in above cmd for DNAT with IPv4
Sample cmd for offloading an IPv4 flow with SNAPT:
ovs-ofctl add-flow ovsbr0 "ip,nw_src=192.168.201.44 \
actions=mod_nw_src:203.31.220.144, mod_tp_src:6789,output:p7p1"
Similar to DNAT, replace 'tp_src' with 'tp_dst' for offloading flow
with DNAPT
Sample cmd for offloading an IPv6 flow with SNAT:
ovs-ofctl add-flow ovsbr0 "ipv6, ipv6_src=2001:5c0:9168::2/64 \
actions=load:0x1->NXM_NX_IPV6_SRC[0..63], \
load:0x20010db801920000->NXM_NX_IPV6_SRC[64..127],output:p7p1"
Replace 'SRC' with DST' above for IPv6 DNAT
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For every single case where bnxt_tc_can_offload() can fail, we are
logging a user friendly descriptive message anyway, but because of the
path it would take in case of failure, another redundant error message
would get logged. Just freeing the node and returning from the point of
failure should suffice.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for packet edit offload of L2 fields (src mac &
dst mac, also referred as L2 rewrite). Only when the mask is fully exact
match for a field, the command is sent down to the adapter to offload
such a flow. Otherwise, an error is returned.
v2: Fix pointer alignment issue in bnxt_fill_l2_rewrite_fields() [MChan]
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot says:
====================
net: dsa: replace routing tables with a list
This branch gets rid of the ds->rtable static arrays in favor of
a single dst->rtable list. This allows us to move away from the
DSA_MAX_SWITCHES limitation and simplify the switch fabric setup.
Changes in v2:
- fix the reverse christmas for David
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that there's no restriction from the DSA core side regarding
the switch IDs and port numbers, only tag_8021q which is currently
reserving 3 bits for the switch ID and 4 bits for the port number, has
limitation for these values. Update their descriptions to reflect that.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because there is no static array describing the links between switches
anymore, we have no reason to force a limitation of the index value
set by the device tree.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA fabric setup code has been simplified a lot so get rid of
the dsa_tree_remove_switch, dsa_tree_add_switch and dsa_switch_add
helpers, and keep the code simple with only the dsa_switch_probe and
dsa_switch_remove functions.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the DSA ports are listed in the switch fabric, there is
no need to store the dsa_switch structures from the drivers in the
fabric anymore. So get rid of the dst->ds static array.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dsa_switch structure has no routing table specific data to setup,
so the switch fabric can directly walk its ports and initialize its
routing table from them.
This allows us to remove the dsa_switch_setup_routing_table function.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers do not use the ds->rtable static arrays anymore, get rid of it.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement a new list of DSA links in the switch fabric itself, to
provide an alterative to the ds->rtable static arrays.
At the same time, provide a new dsa_routing_port() helper to abstract
the usage of ds->rtable in drivers. If there's no port to reach a
given device, return the first invalid port, ds->num_ports. This avoids
potential signedness errors or the need to define special values.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei says:
====================
dpaa2-eth: add MAC/PHY support through phylink
The dpaa2-eth driver now has support for connecting to its associated PHY
device found through standard OF bindings. The PHY interraction is handled
by PHYLINK and even though, at the moment, only RGMII_* phy modes are
supported by the driver, this is just the first step into adding the
necessary changes to support the entire spectrum of capabilities.
This comes after feedback on the initial DPAA2 MAC RFC submitted here:
https://lwn.net/Articles/791182/
The notable change is that now, the DPMAC is not a separate driver, and
communication between the DPMAC and DPNI no longer happens through
firmware. Rather, the DPMAC is now a set of API functions that other
net_device drivers (DPNI, DPSW, etc) can use for PHY management.
The change is incremental, because the DPAA2 architecture has many modes of
connecting net devices in hardware loopback (for example DPNI to DPNI).
Those operating modes do not have a DPMAC and phylink instance.
The documentation patch provides a more complete view of the software
architecture and the current implementation.
Changes in v2:
- added patch 1/5 in order to fix module build
- use -ENOTCONN as a proper return error of dprc_get_connection()
- move the locks to rtnl outside of dpaa2_eth_[dis]connect_mac functions
- remove setting supported/advertised from .validate()
Changes in v3:
- remove an unused variable
Changes in v4:
- use ERR_PTR instead of plain NULL
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add documentation file for the MAC/PHY support in the DPAA2
architecture. This describes the architecture and implementation of the
interface between phylink and a DPAA2 network driver.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dpaa2-eth driver now has support for connecting to its associated
PHY device found through standard OF bindings.
This happens when the DPNI object (that the driver probes on) gets
connected to a DPMAC. When that happens, the device tree is looked up by
the DPMAC ID, and the associated PHY bindings are found.
The old logic of handling the net device's link state by hand still
needs to be kept, as the DPNI can be connected to other devices on the
bus than a DPMAC: other DPNI, DPSW ports, etc. This logic is only
engaged when there is no DPMAC (and therefore no phylink instance)
attached.
The MC firmware support multiple type of DPMAC links: TYPE_FIXED,
TYPE_PHY. The TYPE_FIXED mode does not require any DPMAC management from
Linux side, and as such, the driver will not handle such a DPMAC.
Although PHYLINK typically handles SFP cages and in-band AN modes, for
the moment the driver only supports the RGMII interfaces found on the
LX2160A. Support for other modes will come later.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the function is called at every link up event, although the
FQID values will only change when the DPNI is disconnected from the
current object and reconnected to a different one.
The patch also avoids the forward declaration of update_tx_fqids.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using the newly added fsl_mc_get_endpoint function a fsl-mc driver can
find its associated endpoint (another object at the other link of a MC
firmware link).
The API will be used in the following patch in order to discover the
connected DPMAC object of a DPNI.
Also, the fsl_mc_device_lookup function is made available to the entire
fsl-mc bus driver and not just for the dprc driver.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Export all device types present on the fsl-mc bus in order to be able to
actually use the is_fsl_mc_bus_*() functions from drivers on the bus.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Charles McLachlan says:
====================
sfc: Add XDP support
Supply the XDP callbacks in netdevice ops that enable lower level processing
of XDP frames.
Changes in v4:
- Handle the failure to send some frames in efx_xdp_tx_buffers() properly.
Changes in v3:
- Fix a BUG_ON when trying to allocate piobufs to xdp queues.
- Add a missed trace_xdp_exception.
Changes in v2:
- Use of xdp_return_frame_rx_napi() in tx.c
- Addition of xdp_rxq_info_valid and xdp_rxq_info_failed to track when
xdp_rxq_info failures occur.
- Renaming of rc to err and more use of unlikely().
- Cut some duplicated code and fix an array overrun.
- Actually increment n_rx_xdp_tx when packets are transmitted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Count XDP packet drops, error drops, transmissions and redirects and
expose these counters via the ethtool stats command.
Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
