IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The Scarlett 4i4 Gen 4 adds a R/O headphone volume control in addition
to a R/O master volume control (which is already supported).
Mark the new scarlett2_notify_volume() function with __always_unused
until it gets used when the Gen 4 notification callback function arrays
are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/bd4a76da157f8cc3fbfa02eba96d02bdb86817c5.1703612638.git.g@b4.vu
Early firmware for the Scarlett Gen 4 devices has sufficient
differences that it is better to enforce a minimum firmware version
than to try and work around those differences. Add a minimum firmware
version field to the device info struct, and display a message if the
firmware version is too old. Only create the Firmware Version and MSD
(optional) controls in this case.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/5455a7e54bda81556066abd7f761b10e9c5f8a16.1703612638.git.g@b4.vu
The DSP mux channels are of type SCARLETT2_PORT_TYPE_MIX so the
ALSA controls would refer to them "Mix X" and "Mixer Input X". This
patch fixes them to be called "DSP X" and "DSP Input X".
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/2d91d0a74d5c7f6179e950bed2c80a4498d16649.1703612638.git.g@b4.vu
The DSP mux channels in the Scarlett 4th Gen appear as
SCARLETT2_PORT_TYPE_MIX ports but do not have corresponding mixer
controls. Add a dsp_count option to the device info struct to exclude
those DSP channels from the num_mix_in/num_mix_out counts.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/b78bdb1a7624d55783f5bf0e1ffbfa47a9e9a800.1703612638.git.g@b4.vu
The mixes used by Direct Monitor feature on the Scarlett 4th Gen Solo
and 2i2 interfaces are configurable. This patch adds ALSA controls for
the gains which are copied to the mixer when Direct Monitor is
enabled.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/96282a805b45f04560e5923d170745363906b7f3.1703612638.git.g@b4.vu
When the Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2
interfaces is used, the Mix A and B gains are updated by the
interface. This patch calls snd_ctl_notify() for the ALSA mix controls
when a Direct Monitor notification is received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/713d032e343e0547212368919bef17d6fa1c9d29.1703612638.git.g@b4.vu
The Scarlett 4th Gen small interfaces have a software-controllable
mixer like the large 2nd and 3rd Gen interfaces do. Pressing the
"Direct" button on the interface updates the mixer controls, which
this driver hasn't needed to deal with previously.
This commit stores the ALSA mixer controls, and adds a mix_updated
flag so that the controls can be updated when a notification is
received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/3ba27c60230511b80b0fa75727551ea70f17d829.1703612638.git.g@b4.vu
Add a control to retrieve the power status from the interface
(bus-powered, external-powered, or insufficient power).
Mark the new scarlett2_notify_power_status() function with
__always_unused until it gets used when the Gen 4 notification
callback function arrays are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/d9806bc41adc45b1c19749562fec7765ba24351d.1703612638.git.g@b4.vu
When phantom power is enabled or disabled, the autogain control cannot
be enabled until the interface has signalled that the change is
complete and the input is unmuted. Update those controls to be
read-only during this time.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/f49f7bf9358e1f20713d95d407d8d6a436859877.1703612638.git.g@b4.vu
While the autogain function is running, the other input controls
(select, link, gain, safe, level, air, and phantom) can't be modified.
Update those controls to be read-only during this time.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/ad13bacae77860de8c2d7c89f6ec2a1ee104e65f.1703612638.git.g@b4.vu
Some devices in the Scarlett Gen 4 series have support for
software-controllable input gain. Along with this comes a channel
select option, an auto-gain feature, "safe" mode, and linking two
channels into a stereo pair.
Mark the new scarlett2_notify_input_*() functions with __always_unused
until they get used when the Gen 4 notification callback function
arrays are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/fc39e80bb39863dd1579d342097203942b4f3034.1703612638.git.g@b4.vu
Gen 2/3 interfaces would only use 0/1 values for input level and
phantom power switch controls. Gen 4 interfaces use the second bit to
indicate that the state should be changed (or is changing), and the
input is to be muted (or is muted) while that happens.
Add a "mute" flag to config items to enable this behaviour for the
level/phantom controls.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/f603cd16079c97fad910087e0302828a289d1c15.1703612638.git.g@b4.vu
Writing Scarlett Gen 4 parameters differs from Gen 2 and Gen 3:
- the values are written into a shared write location
- the values are only byte-sized
- the read locations now extend beyond 0xFF
- a separate NVRAM save step is no longer required
This patch implements that alternate write style, triggered by setting
the config item size field to zero.
The write address is specified through a new config set field
gen4_write_addr.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1624e6d8a0c629c3bdfe53825b16e8b589724fc4.1703612638.git.g@b4.vu
The Focusrite Scarlett Gen 4 Solo has Air and Phantom Power controls
on analogue input #2 (the Gen 3 Solo had these controls on analogue
input #1). Add air_input_first and phantom_first device info options
to cater for this.
These options are similar to the level_input_first option that was
added for the Gen 3 Solo, but these new options do not require
adjusting the index of the control.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/19511f18895b8c094985a4a5691fbc1dc028c108.1703612638.git.g@b4.vu
The notification value for monitor_other on the large interfaces is
the same as the notification value for direct_monitor on the 3rd Gen
small interfaces. Add a separate scarlett3a_notifications array and
split out the direct_monitor handling.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/9b56a483e3e9c1447684f18239a88652c1f01445.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Gen 2/3 devices have a single notification value for "input other"
changes. Gen 4 has separate notification values for level, pad, air,
and phantom power changes. Therefore, split the input_other_updated
field and the scarlett2_update_input_other() function into the four
components so that they can be handled separately later.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/a1a1d190659d56689792aa20ceeb53a6175171ad.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
db_scale_scarlett2_gain is the TLV for the output volume controls.
Gen 4 has software-controllable input gain controls, so rename this to
db_scale_scarlett2_volume so we can use that name for the inputs.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/d544ec7cc5d5a849da104a5a78b17f61f50657c1.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently-supported interfaces with a mixer have per-channel volume
controls, but this changes in Gen 4. Add a check so that the Playback
Volume and associated controls don't get created unless the
SCARLETT2_CONFIG_LINE_OUT_VOLUME config item is present.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/30f68cb311e27f2cc1351cb846218f7248a90263.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By splitting config set gen2 into gen2a/b (for 6i6/18i8 vs 18i20), and
gen3b into gen3b/c (for 4i4/8i6 vs 18i8/18i20), we can use
scarlett2_has_config_item() instead of the per-device line_out_hw_vol.
As Gen 4 has a master volume control but no SW/HW switches, check for
both SCARLETT2_CONFIG_MASTER_VOLUME and SCARLETT2_CONFIG_SW_HW_SWITCH
as needed, even though for Gen 2 and Gen 3 the former implies the
latter.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/307c4f8d6d2e034f3e386b51d72a39d77c8a9fce.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Scarlett Gen 2 and Gen 3 devices combine volume and dim/mute
notifications. The Scarlett 4i4 Gen 4 has volume change notification
but no dim/mute control so split dim_mute_update out from vol_update.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/bf63f48bcc68ae739bd9948c8ee2f87ee7af22a2.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The struct scarlett2_usb_volume_status matched the config space layout
of a few volume controls that could be read together and were in fixed
locations between Gen 2 and Gen 3 devices.
Gen 4 devices have removed, moved, and new related controls, so this
needs to be cleaned up. By adding SCARLETT2_CONFIG_MASTER_VOLUME (the
only config item that didn't already have its own entry, because it is
read-only), we can remove:
- struct scarlett2_usb_volume_state,
- #define SCARLETT2_USB_VOLUME_STATUS_OFFSET, and
- scarlett2_usb_get_volume_status()
and replace with calls to scarlett2_usb_get_config().
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/2ee88994857246bf89fab8e62ac279f3bcf96192.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The notification values were previously #define'd, and checked with a
series of if() statements calling functions. Replace with an array of
masks/callback function pointers, and a pointer to that array in the
scarlett2_config_set definitions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/0ee2a3786f9d30c89eeae59d7e933424e8f39162.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace array index into config sets with a pointer to a config set.
Copy the config_set pointer to the scarlett2_data struct.
This simplifies both the definition and use of the config sets.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/61f69519fb6fbb677e066891a3a6771aeeec106d.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add struct scarlett2_config_set so that data which is common to all
devices in a config set can be stored there rather than in the
model-specific data.
Accordingly, rename scarlett2_config_items[] to
scarlett2_config_sets[].
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/bfdb04cd6239af9a8c26a52da0537980f77c0437.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the presence of a mixer is determined by checking if the
device uses the GEN_3A config set. Add scarlett2_has_mixer() function
which checks for the presence of mux_assignment entries instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ef6f4d360c2fe682ab65f83cccbe5be66ccc6296.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit removes the explicit integer assignments from the enums.
The actual values matter little, and not assigning explicit values
makes it easier to modify the longer lists in the future.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/67f0f1bb8b90d7c76dfe7062d22d33bbde19cf93.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ops.write to the hwdep interface. Once the upgrade firmware flash
segment has been erased, writes to the hwdep fd are permitted, and
translated to SCARLETT2_USB_WRITE_SEGMENT commands to the device.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZY65S0ojShSNSeRQ@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ioctls:
- SCARLETT2_IOCTL_SELECT_FLASH_SEGMENT
- SCARLETT2_IOCTL_ERASE_FLASH_SEGMENT
- SCARLETT2_IOCTL_GET_ERASE_PROGRESS
The settings or the firmware flash segment can be selected and then
erased (asynchronous operation), and the erase progress can be
monitored.
If the erase progress is not monitored, then subsequent hwdep
operations will block until the erase is complete.
Once the erase is started, ALSA controls that communicate with the
device will all return -EBUSY, and the device must be rebooted.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/227409adb672f174bf3db211e9bda016fb4646ea.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Call SCARLETT2_USB_INFO_FLASH and SCARLETT2_USB_INFO_SEGMENT to find
the App_Settings and App_Upgrade flash segment numbers, and store them
in the scarlett2_data struct. These will be used later to implement
reset to factory defaults and firmware upgrade functions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/70f0108a9cf99b69f7aa920c4bcdb0cf4bf3da98.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and
SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside
scarlett2_mixer_values[].
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/3b19fb3da641b587749b85fe1daa1b4e696c0c1b.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The *_ctl_get() functions which call scarlett2_update_*() were not
checking the return value. Fix to check the return value and pass to
the caller.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/32a5fdc83b05fa74e0fcdd672fbf71d75c5f0a6d.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_usb_set_config() calls scarlett2_usb_get() but was not
checking the result. Return the error if it fails rather than
continuing with an invalid value.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e15fae6c5 ("ALSA: usb-audio: scarlett2: Allow bit-level access to config")
Link: https://lore.kernel.org/r/def110c5c31dbdf0a7414d258838a0a31c0fab67.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_config_save() was ignoring the return value from
scarlett2_usb(). As this function is not called from user-space we
can't return the error, so call usb_audio_err() instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/bf0a15332d852d7825fa6da87d2a0d9c0b702053.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
