IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Instead of having dedicated function per message that we want to send
to the firmware in COMMS protocol, have a generic function that we can
call to from other parts of the driver
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of using the Linux kernel HWMON enums definition when
communicating with the firmware, use proprietary HWMON based enums
i.e. map hwmon.h header enum to cpucp_if.h based enum while.
This is needed because the HWMON enums are not forcing backward
compatibility and therefore changes can break compatibility between
newer driver and older firmware.
The driver will check for CPU_BOOT_DEV_STS0_MAP_HWMON_EN bit to
validate if f/w supports cpucp->hwmon enum mapping to support older
firmware where this mapping won't be available.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Command submission timeout is currently determined during driver
loading time. As some environments requires this timeout to be
modified in runtime, we introduce a new debugfs node that controls
the timeout value without the need to reload the driver.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In wait for CS IOCTL code, the driver resets the incoming args structure
before returning to the user, regardless of the return value of the
IOCTL.
In case the IOCTL returns EINTR, resetting the args will result in error
in case the userspace will repeat the ioctl call immediately (which is
the behavior in the hl-thunk userspace library).
The solution is to reset the args only if the driver returns success (0)
as a return value for the IOCTL.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Staged submission consists of multiple command submissions.
In order to be explicit, driver should return a single cs sequence
for every cs in the submission, or else user may try to wait on
an internal CS rather than waiting for the whole submission.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add handling for case where the user doesn't set wait offset,
and keeps it as 0. In such a case the driver will decrement one
from this zero value which will cause the code to wait for
wrong number of signals.
The solution is to treat this case as in legacy wait cs,
and wait for the next signal.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As user can send wrong arguments to multi CS API, we rate limit
the amount of errors dumped to dmesg, in addition we change the
severity to warning.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Couple of fixes to the LBW RR configuration:
1. Add missing configuration of the SM RR registers in the DMA_IF.
2. Remove HBW range that doesn't belong.
3. Add entire gap + DBG area, from end of TPC7 to end of entire
DBG space.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As collective wait operation is required only when NIC ports are
available, we disable the option to submit a CS in case all the ports
are disabled, which is the current situation in the upstream driver.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to FLR scenario when running inside a VM, we must not use indirect
MSI because it might cause some issues on VM destroy.
In a VM we use single MSI mode in contrary to multi MSI mode which is
used in bare-metal.
Hence direct MSI should be used in single MSI mode only.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case of single staged cs with both first/last indications
set, we reach a scenario where in cs_release function flow
we don't cancel the TDR work before freeing the cs memory,
this lead to kernel OOPs since when the timer expires
the work pointer will be freed already.
In addition treat wait encaps cs "not found" handle
as "OK" for the user in order to keep the user interface
for both legacy and encpas signal/wait features the same.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We have a potential race where a user interrupt can be received
in between user thread value comparison and before request was
added to wait list. This means that if no consecutive interrupt
will be received, user thread will timeout and fail.
The solution is to add the request to wait list before we
perform the comparison.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit corrects CARD NAME for Gaudi as "HL205"
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When the f/w runs in secured mode, it can reset the ASIC when certain
events occur. In unsecured mode, the driver asks the f/w to reset the
ASIC for those events.
We need to perform the entire reset procedure but without accessing the
ASIC. i.e. without halting the engines and without sending messages
to the f/w.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix 2 areas in the code where it's possible the code will
go to sleep while holding a spinlock.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
copy_from_user might sleep so we can never call it when we have
a spinlock.
Moreover, it is not necessary in waiting for user interrupt, because
if multiple threads will call this function on the same interrupt,
each one will have it's own fence object inside the driver. The
user address might be the same, but it doesn't really matter to us,
as we only read from it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Checking if the device is operational when entering the function to
wait for user interrupt is not something that is useful or necessary.
It is not done in any other wait_for_cs ioctl path.
If the device becomes non-operational during the wait, the reset
function will make sure the process wait is interrupted.
Instead, move the check to the beginning of hl_wait_ioctl(). It will
block any attempt to wait on CS or user interrupt once the device
is already marked as non-operational.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because this spinlock is taken in an interrupt handler, we must use
the spin_lock_irqsave/irqrestore version to disable the interrupts
on the local CPU. Otherwise, we can have a potential deadlock (if
the interrupt handler is scheduled to run on the same cpu that the
code who took the lock was running on).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
On init, the disabled state is cleared right before hw_init and that
causes the device to report on "Operational" state before the device
initialization is finished. Although the char device is not yet exposed
to the user at this stage, the sysfs entries are exposed.
This can cause errors in monitoring applications that use the sysfs
entries.
In order to avoid this, a new state "in device creation" is introduced
to ne reported when the device is not disabled but is still in init
flow.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This must be done to clear the internal mem cache so we won't get
ecc errors on the first invalidation.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In secured mode, the CGM is disabled. Therefore, the DC power is
higher. Without taking it into consideration, the utilization is
12-15% at idle.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The out of bounds SLM access TPC interrupt indicates a severe compiler
bug and needs to be informed to user.
This interrupt is currently masked so unmask it.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is useful to have the ability to see which user address was pinned
to which physical address during the initial mapping. We already have
all that info stored, but no means to search this data (which may be
quite large).
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case F/W security is enabled driver cannot access ECC registers,
hence driver must fetch the ECC info from F/W.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
During the integration, the multi-CS requirements were refined:
- The multi CS call shall wait on "per-ASIC" predefined stream masters
instead of set of streams.
- Stream masters are set of QIDs used by the upper SW layers (synapse)
for completion (must be an external/HW queue).
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current "state dump" is lacking of monitored SOB IDs. Add for
convenience.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because we don't have multiple contexts in GAUDI, and to minimize
calls to is_idle function (which uses many register reads), move
the call to clear the user registers to the opening of the single
user context.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Various f/w versions have different timeouts, so increase the default
timeout to accommodate all the options.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add several new packets between driver and firmware.
Add matching compatibility bits for backward compatibility.
Add support for 4K event types.
Add information about pcie errors.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because the register reads might be trapped by the hypervisor in
certain deployments, minimize the number of reads during runtime by
moving static initializations to functions that occur during device
initialization instead of context open.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The address resolution via debugfs was not taking into consideration the
page offset, resulting in a wrong address.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently userptr endpoint in debugfs prints out virtual addresses
in the user process memory space, without specifying their owner process
ID. User space virtual address is meaningless without knowing the owner
process.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
HW init is mostly about configuring registers. Therefore, it is better
to activate DMAs only in late init and afterwards.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to enhance debuggability, we will scrub the whole HBM to
a specific value, in case HBM scrubbing is enabled. Scrubbing will be
performed after reset and after user closes the FD.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently there is no validity check for event ID received from F/W,
Thus exposing driver to memory overrun.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For some ASICs, the f/w reads the msg_to_cpu_reg value after
reset, and for some it doesn't.
Therefore, to be sure f/w doesn't read a wrong value after reset, we
need to clear this register before the reset occurs.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to better support variants of the same ASIC
the set_pci_regions function is now an ASIC function which
allows each ASIC to implement it internally, thus keeping
all definitions static to the file.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Done as the bar size can exceed 4GB.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add the server type property to the hl_info_hw_ip_info structure
that is exposed to the user via the INFO IOCTL.
This is needed by the userspace s/w stack to know the connections map
of the internal links that connect the ASIC among themselves inside the
server.
The F/W will tell us, as part of the NIC information, the server type
that the GAUDI is located in.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This warning is redundant as we will print a notice in case the device
is still in use after the FD was closed. No need to print the same
message per context.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit is the second part of the encapsulated signals feature.
It contains the driver support for submission of cs with encapsulated
signals and the wait for them.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The signaling from within encapsulated OP capability is merged into the
existing stream architecture, such that one can trigger multiple
signaling from an encapsulated op, according to the time the event
was done in the graph execution and avoid the need to wait for the
whole encapsulated OP execution to be complete before the stream can
signal.
This commit implements only the reserve/unreserve part.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the SOB reset was in fence release function which happens
only at the CS wraparound during the CS allocation time.
In order to support the new encapsulated signals reservation feature,
we need to move the SOB reset to an earlier phase because this SOB
could reach it's max value very fast using the signal reservation.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When user sends multiple CSs, waiting for each CS is not efficient
as it involves many user-kernel context switches.
In order to address this issue we add support to "wait on multiple CSs"
using a new uAPI which can wait on maximum of 32 CSs. The new uAPI is
defined using a new flag - WAIT_FOR_MULTI_CS - in the wait_for_cs IOCTL.
The input parameters for this uAPI will be:
@seq: user pointer to an array of up to 32 CS's sequence numbers.
@seq_array_len: length of sequence array.
@timeout_us: timeout for waiting for any CS.
The output paramateres for this API will be:
@status: multi CS ioctl completion status (dedicated status was added as
well).
@flags: bitmap of output flags of the CS.
@cs_completion_map: bitmap for multi CS, if CS sequence that was placed
in index N in input seq array has completed- the N-th
bit in cs_completion_map will be 1, otherwise it will
be 0.
@timestamp_nsec: timestamp of the first completed CS
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To add proper support for wait-for-multi-CS, locking the CS lock
for each CS fence in the list is not efficient.
Instead, this patch add support to lock the CS lock once to get all
required fences.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The driver quietly handles memory mappings that were not freed so no
need to print a warning about that when user closes the FD.
Accordingly, revise the text that is printed in case the device is
still in use after the user process closed the FD.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
