IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There is an unusual case that the range map covers right up to the top
of system RAM, but leaves a hole somewhere lower down. Then it prevents
the nvme device dma mapping in the checking path of phys_to_dma() and
causes the hangs at boot.
E.g. On an Armv8 Ampere server, the dsdt ACPI table is:
Method (_DMA, 0, Serialized) // _DMA: Direct Memory Access
{
Name (RBUF, ResourceTemplate ()
{
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000000000000000, // Range Minimum
0x00000000FFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000100000000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000006010200000, // Range Minimum
0x000000602FFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x000000001FE00000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x00000060F0000000, // Range Minimum
0x00000060FFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000010000000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000007000000000, // Range Minimum
0x000003FFFFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000039000000000, // Length
,, , AddressRangeMemory, TypeStatic)
})
But the System RAM ranges are:
cat /proc/iomem |grep -i ram
90000000-91ffffff : System RAM
92900000-fffbffff : System RAM
880000000-fffffffff : System RAM
8800000000-bff5990fff : System RAM
bff59d0000-bff5a4ffff : System RAM
bff8000000-bfffffffff : System RAM
So some RAM ranges are out of dma_range_map.
Fix it by checking whether each of the system RAM resources can be
properly encompassed within the dma_range_map.
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For direct DMA, if the size is small enough to have originated from a
kmalloc() cache below ARCH_DMA_MINALIGN, check its alignment against
dma_get_cache_alignment() and bounce if necessary. For larger sizes, it
is the responsibility of the DMA API caller to ensure proper alignment.
At this point, the kmalloc() caches are properly aligned but this will
change in a subsequent patch.
Architectures can opt in by selecting DMA_BOUNCE_UNALIGNED_KMALLOC.
Link: https://lkml.kernel.org/r/20230612153201.554742-15-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add PCI P2PDMA support for dma_direct_map_sg() so that it can map
PCI P2PDMA pages directly without a hack in the callers. This allows
for heterogeneous SGLs that contain both P2PDMA and regular pages.
A P2PDMA page may have three possible outcomes when being mapped:
1) If the data path between the two devices doesn't go through the
root port, then it should be mapped with a PCI bus address
2) If the data path goes through the host bridge, it should be mapped
normally, as though it were a CPU physical address
3) It is not possible for the two devices to communicate and thus
the mapping operation should fail (and it will return -EREMOTEIO).
SGL segments that contain PCI bus addresses are marked with
sg_dma_mark_pci_p2pdma() and are ignored when unmapped.
P2PDMA mappings are also failed if swiotlb needs to be used on the
mapping.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use the more specific is_swiotlb_active check instead of checking the
global swiotlb_force variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
When we looked into FIO performance with swiotlb enabled in VM, we found
swiotlb_bounce() is always called one more time than expected for each DMA
read request.
It turns out that the bounce buffer is copied to original DMA buffer twice
after the completion of a DMA request (one is done by in
dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()).
But the content in bounce buffer actually doesn't change between the two
rounds of copy. So, one round of copy is redundant.
Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to
skip the memory copy in it.
This fix increases FIO 64KB sequential read throughput in a guest with
swiotlb=force by 5.6%.
Fixes: 55897af63091 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Reported-by: Wang Zhaoyang1 <zhaoyang1.wang@intel.com>
Reported-by: Gao Liang <liang.gao@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Propagate the swiotlb_force into io_tlb_default_mem->force_bounce and
use it to determine whether to bounce the data or not. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Includes Will's fix]
Update is_swiotlb_buffer to add a struct device argument. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Split swiotlb_tbl_sync_single into two separate funtions for the to device
and to cpu synchronization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Now that swiotlb remembers the allocation size there is no need to pass
it back to swiotlb_tbl_unmap_single.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Most of the dma_direct symbols should only be used by direct.c and
mapping.c, so move them to kernel/dma. In fact more of dma-direct.h
should eventually move, but that will require more coordination with
other subsystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
