IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As we have the ability to track the PHYs connected to a net_device
through the link_topology, we can expose this list to userspace. This
allows userspace to use these identifiers for phy-specific commands and
take the decision of which PHY to target by knowing the link topology.
Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list
devices on only one interface.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the uABI of UFFDIO_MOVE ioctl.
UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application
needs pages to be allocated [1]. However, with UFFDIO_MOVE, if pages are
available (in userspace) for recycling, as is usually the case in heap
compaction algorithms, then we can avoid the page allocation and memcpy
(done by UFFDIO_COPY). Also, since the pages are recycled in the
userspace, we avoid the need to release (via madvise) the pages back to
the kernel [2].
We see over 40% reduction (on a Google pixel 6 device) in the compacting
thread's completion time by using UFFDIO_MOVE vs. UFFDIO_COPY. This was
measured using a benchmark that emulates a heap compaction implementation
using userfaultfd (to allow concurrent accesses by application threads).
More details of the usecase are explained in [2]. Furthermore,
UFFDIO_MOVE enables moving swapped-out pages without touching them within
the same vma. Today, it can only be done by mremap, however it forces
splitting the vma.
[1] https://lore.kernel.org/all/1425575884-2574-1-git-send-email-aarcange@redhat.com/
[2] https://lore.kernel.org/linux-mm/CA+EESO4uO84SSnBhArH4HvLNhaUQ5nZKNKXqxRCyjniNVjp0Aw@mail.gmail.com/
Update for the ioctl_userfaultfd(2) manpage:
UFFDIO_MOVE
(Since Linux xxx) Move a continuous memory chunk into the
userfault registered range and optionally wake up the blocked
thread. The source and destination addresses and the number of
bytes to move are specified by the src, dst, and len fields of
the uffdio_move structure pointed to by argp:
struct uffdio_move {
__u64 dst; /* Destination of move */
__u64 src; /* Source of move */
__u64 len; /* Number of bytes to move */
__u64 mode; /* Flags controlling behavior of move */
__s64 move; /* Number of bytes moved, or negated error */
};
The following value may be bitwise ORed in mode to change the
behavior of the UFFDIO_MOVE operation:
UFFDIO_MOVE_MODE_DONTWAKE
Do not wake up the thread that waits for page-fault
resolution
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES
Allow holes in the source virtual range that is being moved.
When not specified, the holes will result in ENOENT error.
When specified, the holes will be accounted as successfully
moved memory. This is mostly useful to move hugepage aligned
virtual regions without knowing if there are transparent
hugepages in the regions or not, but preventing the risk of
having to split the hugepage during the operation.
The move field is used by the kernel to return the number of
bytes that was actually moved, or an error (a negated errno-
style value). If the value returned in move doesn't match the
value that was specified in len, the operation fails with the
error EAGAIN. The move field is output-only; it is not read by
the UFFDIO_MOVE operation.
The operation may fail for various reasons. Usually, remapping of
pages that are not exclusive to the given process fail; once KSM
might deduplicate pages or fork() COW-shares pages during fork()
with child processes, they are no longer exclusive. Further, the
kernel might only perform lightweight checks for detecting whether
the pages are exclusive, and return -EBUSY in case that check fails.
To make the operation more likely to succeed, KSM should be
disabled, fork() should be avoided or MADV_DONTFORK should be
configured for the source VMA before fork().
This ioctl(2) operation returns 0 on success. In this case, the
entire area was moved. On error, -1 is returned and errno is
set to indicate the error. Possible errors include:
EAGAIN The number of bytes moved (i.e., the value returned in
the move field) does not equal the value that was
specified in the len field.
EINVAL Either dst or len was not a multiple of the system page
size, or the range specified by src and len or dst and len
was invalid.
EINVAL An invalid bit was specified in the mode field.
ENOENT
The source virtual memory range has unmapped holes and
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES is not set.
EEXIST
The destination virtual memory range is fully or partially
mapped.
EBUSY
The pages in the source virtual memory range are either
pinned or not exclusive to the process. The kernel might
only perform lightweight checks for detecting whether the
pages are exclusive. To make the operation more likely to
succeed, KSM should be disabled, fork() should be avoided
or MADV_DONTFORK should be configured for the source virtual
memory area before fork().
ENOMEM Allocating memory needed for the operation failed.
ESRCH
The target process has exited at the time of a UFFDIO_MOVE
operation.
Link: https://lkml.kernel.org/r/20231206103702.3873743-3-surenb@google.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add ioctls:
- SCARLETT2_IOCTL_SELECT_FLASH_SEGMENT
- SCARLETT2_IOCTL_ERASE_FLASH_SEGMENT
- SCARLETT2_IOCTL_GET_ERASE_PROGRESS
The settings or the firmware flash segment can be selected and then
erased (asynchronous operation), and the erase progress can be
monitored.
If the erase progress is not monitored, then subsequent hwdep
operations will block until the erase is complete.
Once the erase is started, ALSA controls that communicate with the
device will all return -EBUSY, and the device must be rebooted.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/227409adb672f174bf3db211e9bda016fb4646ea.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The kernel doc comments for struct ethtool_link_settings includes
documentation for three fields that were never present there, leading to
these docs-build warnings:
./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'supported' description in 'ethtool_link_settings'
./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'advertising' description in 'ethtool_link_settings'
./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'lp_advertising' description in 'ethtool_link_settings'
Remove the entries to make the warnings go away. There was some
information there on how data in >link_mode_masks is formatted; move that
to the body of the comment to preserve it.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
So far the mirred action has dealt with syntax that handles
mirror/redirection for netdev. A matching packet is redirected or mirrored
to a target netdev.
In this patch we enable mirred to mirror to a tc block as well.
IOW, the new syntax looks as follows:
... mirred <ingress | egress> <mirror | redirect> [index INDEX] < <blockid BLOCKID> | <dev <devname>> >
Examples of mirroring or redirecting to a tc block:
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 192.168.0.0/16 action mirred egress mirror blockid 22
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 10.10.10.10/32 action mirred egress redirect blockid 22
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Virtual ISM devices introduced in SMCv2.1 requires a 128 bit extended
GID vs. the existing ISM 64bit GID. So the 2nd 64 bit of extended GID
should be included in SMC-D linkgroup netlink attribute as well.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ctx in struct lsm_ctx is an array of size ctx_len, tell the compiler
about this using __counted_by() where supported to improve the ability to
detect overflow issues.
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The notable changes are:
- uAPI changes:
- Add sysfs entry to allow users to identify a device minor id with its
debugfs path
- Add sysfs entry to expose the device's module id as given to us from
the f/w
- Add signed device information retrieval through the INFO ioctl
- New features and improvements:
- Update documentation of debugfs paths
- Add support for Gaudi2C device (new PCI revision number)
- Add pcie reset prepare/done hooks
- Firmware related fixes and changes:
- Print three instances version numbers of Infineon second stage
- Assume hard-reset is done by f/w upon PCIe AXI drain
- Bug fixes and code cleanups:
- Fix information leak in sec_attest_info()
- Avoid overriding existing undefined opcode data in Gaudi2
- Multiple Queue Manager (QMAN) fixes for Gaudi2
- Set hard reset flag if graceful reset is skipped
- Remove 'get temperature' debug print
- Fix the new Event Queue heartbeat mechanism
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmWBaF8ACgkQZR1NuKta
54ATiAf/flp2gakFbG18e/IAyroSE1c6ZEV07l9vuYF8VCSuC77YVKdkU+QwwwQt
h09gj46zsS/NX4QnBkUyZPnqsR/QoW2XpMABT89JuohCwDM7BNo2MUCRAFiNrH32
T3DjgJuLdk4cuohy7aD1mT0I/BsoCIQzJlojdOH7y3K2eNJD82wNVVjmjA1cfyVk
vKgZXT96o6mgPIA4cNcHjuYd5H9dE8z1vatq6a1JwVZM4FDWXLV1IxKJFOXTRUs9
30v0cNATkHbWMWI2N5bX+AK/GOuWvKaW8+NMmIjXaaHWS88tFFn2MKbAvxIChENd
w1ondDyZqxjAXFvLaJhpKcTG2m3BxA==
=YhxU
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2023-12-19' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.8.
The notable changes are:
- uAPI changes:
- Add sysfs entry to allow users to identify a device minor id with its
debugfs path
- Add sysfs entry to expose the device's module id as given to us from
the f/w
- Add signed device information retrieval through the INFO ioctl
- New features and improvements:
- Update documentation of debugfs paths
- Add support for Gaudi2C device (new PCI revision number)
- Add pcie reset prepare/done hooks
- Firmware related fixes and changes:
- Print three instances version numbers of Infineon second stage
- Assume hard-reset is done by f/w upon PCIe AXI drain
- Bug fixes and code cleanups:
- Fix information leak in sec_attest_info()
- Avoid overriding existing undefined opcode data in Gaudi2
- Multiple Queue Manager (QMAN) fixes for Gaudi2
- Set hard reset flag if graceful reset is skipped
- Remove 'get temperature' debug print
- Fix the new Event Queue heartbeat mechanism
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYFpihZscr/fsRRd@ogabbay-vm-u22.habana-labs.com
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms. The experimental support starts with Tiger Lake.
i915 will continue be the main production driver for the platforms
up to Meteor Lake and Alchemist. Then the goal is to make this Intel
Xe driver the primary driver for Lunar Lake and newer platforms.
It uses most, if not all, of the key drm concepts, in special: TTM,
drm-scheduler, drm-exec, drm-gpuvm/gpuva and others.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmWErlkACgkQ+mJfZA7r
E8ptAQf/UILUy63usqMBQx5gGTJ5e6oyGy0r97JdBBWNxhcu3/4uN1SR6V2LSV7p
mnZt/LrHZ/24s73e5D7sh909GCYm/MMWH7v0KypJq5Z74BHb9IePP7+Q4NTfXfqS
5AotYxDEwPBQZpfYLA7y17XrB01yz/gF8wHytBFTPiPOlve7BDAYw4j8o+ocztxy
sLLwPi7A6RJJlpXaDa33DpH5MLpTVYUOuxaIElqu949AJj/Me+LHd26VfoGWt9YT
AWzAm+LLoBhyE5lk9swWxvphGvNoOuKf8soTMEVXr4qxsR6d4LShkrljSYSbtRhl
2QZMgvSL4pGkB3Yvfxb0hidWuVMNfA==
=bubx
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2023-12-21-pr1-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Introduce a new DRM driver for Intel GPUs
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms. The experimental support starts with Tiger Lake.
i915 will continue be the main production driver for the platforms
up to Meteor Lake and Alchemist. Then the goal is to make this Intel
Xe driver the primary driver for Lunar Lake and newer platforms.
It uses most, if not all, of the key drm concepts, in special: TTM,
drm-scheduler, drm-exec, drm-gpuvm/gpuva and others.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: add an extra X86 check, fix a typo, fix drm_exec_init interface
change].
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYSwLgXZUZ57qGPQ@intel.com
UHB AP send supported power type(LPI, SP, VLP)
in beacon and probe response IE and STA should
connect to these AP only if their regulatory support
the AP power type.
Beacon/Probe response are reported to userspace
with reason "STA regulatory not supporting to connect to AP
based on transmitted power type" and it should
not connect to AP.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.cbfbef9170a9.I432f78438de18aa9f5c9006be12e41dc34cc47c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
FCC-594280 D01 Section B.3 allows peer-to-peer and ad hoc devices to
operate on DFS channels while they operate under the control of a
concurrent DFS master. For example, it is possible to have a P2P GO on a
DFS channel as long as BSS connection is active on the same channel.
Allow such operation by adding additional regulatory flags to indicate
DFS concurrent channels and capable devices. Add the required
relaxations in DFS regulatory checks.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.bdfb8a9c7c54.I973563562969a27fea8ec5685b96a3a47afe142f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This kernel uevent is getting removed for now. It will come
back later with a better future proof name.
v2: Rebase (Francois Dugast)
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Bring those defines close to the context where they can be used. Also
apply indentation as it is done for other subsets of defines.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move those defines to align on the rule used elsewhere in the file which
was introduced by commit 4f082f2c3a37 ("drm/xe: Move defines before
relevant fields").
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The tail of the provided ring buffer is shared between the kernel and
the application, but the head is private to the kernel as the
application doesn't need to see it. However, this also prevents the
application from knowing how many buffers the kernel has consumed.
Usually this is fine, as the information is inherently racy in that
the kernel could be consuming buffers continually, but for cleanup
purposes it may be relevant to know how many buffers are still left
in the ring.
Add IORING_REGISTER_PBUF_STATUS which will return status for a given
provided buffer ring. Right now it just returns the head, but space
is reserved for more information later in, if needed.
Link: https://github.com/axboe/liburing/discussions/1020
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Complete the documentation of some structs by adding functional
examples of user space code. Those examples are intentionally kept
very simple. Put together, they provide a foundation for a minimal
application that executes a job using the Xe driver.
v2: Remove use of DRM_XE_VM_BIND_FLAG_ASYNC (Francois Dugast)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In order to make proper use the uAPI, a prerequisite is to understand
some key concepts about the discrete GPU devices which are supported
by the Xe driver. For example, some structs defined in the uAPI are an
abstraction of a hardware component with a specific role.
This diagram helps to build a mental representation of a device how it
is seen by the Xe driver. As written in the documentation, it does not
intend to be a literal representation of an existing device. A lot
more information could be added but the intention for the overview is
to keep it simple, and go into detail as needed in other sections.
v2: Add GT1 inside Tile0 (José Roberto de Souza)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The uAPI should stay generic in regarding to the bitmask. It is
the userspace responsibility to check for the type/class of the
memory, without any assumption.
Also add comments inside the code to explain how it is actually
constructed so we don't accidentally change the assignment of
the instance and the masks.
No functional change in this patch. It only explains and document
the memory_region masks. A further follow-up work with the
organization of all memory regions around struct xe_mem_regions
is desired, but not part of this patch.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
No functional change in this patch.
Let's ensure all of our structs are documented and with a certain
standard. Also, let's have an overview and list of IOCTLs as the
very beginning of the generated HTML doc.
v2: Nits (Lucas De Marchi)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
This patch doesn't modify any text or uapi entries themselves.
It only move things up and down aiming a better organization of the uAPI.
While fixing the documentation I noticed that query_engine_cs_cycles
was in the middle of the memory_region info. Then I noticed more
mismatches on the order when compared to the order of the IOCTL
and QUERY entries declaration. So this patch aims to bring some
order to the uAPI so it gets easier to read and the documentation
generated in the end is able to tell a consistent story.
Overall order:
1. IOCTL definition
2. Extension definition and helper structs
3. IOCTL's Query structs in the order of the Query's entries.
4. The rest of IOCTL structs in the order of IOCTL declaration.
5. uEvents
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
As there is no direct way to make comments of constants directly
visible in the kernel doc, move them to the description of the
structure where they can be used. By doing so they appear in the
"Description" section of the struct documentation.
v2: Remove DRM_XE_UFENCE_WAIT_MASK_* (Francois Dugast)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a documentation on the content and format of when using query type
DRM_XE_DEVICE_QUERY_HWCONFIG. The list of keys can be found in IGT
under lib/intel_hwconfig_types.h.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Provide a description of the keys used the struct
drm_xe_query_config info array.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/637
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Document the behavior of the driver for IOCTL DRM_IOCTL_XE_DEVICE_QUERY
depending on the size value provided in struct drm_xe_device_query.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This removes the documentation build warnings below:
include/uapi/drm/xe_drm.h:828: warning: Function parameter or \
member 'pad2' not described in 'drm_xe_vm_bind_op'
include/uapi/drm/xe_drm.h:875: warning: Function parameter or \
member 'pad2' not described in 'drm_xe_vm_bind'
include/uapi/drm/xe_drm.h:1006: warning: Function parameter or \
member 'handle' not described in 'drm_xe_sync'
include/uapi/drm/xe_drm.h:1006: warning: Function parameter or \
member 'timeline_value' not described in 'drm_xe_sync'
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a comment to each struct to complete documentation, ensure all
struct appear in the kernel doc, and bind structs to IOCTLs.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove concept of async vs sync VM bind queues, rather make all binds
async.
The following bits have dropped from the uAPI:
DRM_XE_ENGINE_CLASS_VM_BIND_ASYNC
DRM_XE_ENGINE_CLASS_VM_BIND_SYNC
DRM_XE_VM_CREATE_FLAG_ASYNC_DEFAULT
DRM_XE_VM_BIND_FLAG_ASYNC
To implement sync binds the UMD is expected to use the out-fence
interface.
v2: Send correct version
v3: Drop drm_xe_syncs
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
To ensure consistency and avoid possible later conflicts,
let's add drm_xe prefix to xe_user_extension struct.
Cc: Francois Dugast <francois.dugast@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
PMU uapi is likely to change in the future. Till the uapi is finalized,
remove PMU from Xe. PMU can be re-added after uapi is finalized.
v2: Include xe_drm.h in xe/tests/xe_dma_buf.c (Francois)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Those are just possible values for the comparison mask but they are not
specific magic values. Let's keep them as examples in the documentation
but remove them from the uAPI.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The exec_queue_set_property feature was removed in a previous
commit 0f1d88f27864 ("drm/xe/uapi: Kill exec_queue_set_property") and
is no longer usable, struct drm_xe_exec_queue_set_property does not
exist anymore, so let's remove this.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
remove the num_engines/instances members from drm_xe_wait_user_fence
structure and add a exec_queue_id member
Right now this is only checking if the engine list is sane and nothing
else. In the end every operation with this IOCTL is a soft check.
So, let's formalize that and only use this IOCTL to wait on the fence.
exec_queue_id member will help to user space to get proper error code
from kernel while in exec_queue reset
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
All the properties should be immutable and set upon exec_queue creation
using the existent extension. So, let's kill this useless and dangerous
uapi.
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
The vm_create ioctl function doesn't accept any extension.
Remove this left over.
A backward compatible change.
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Currently we're using "compute mode" for long running VMs using
preempt-fences for memory management, and "fault mode" for long
running VMs using page faults.
Change this to use the terminology "long-running" abbreviated as LR for
long-running VMs. These VMs can then either be in preempt-fence mode or
fault mode. The user can force fault mode at creation time, but otherwise
the driver can choose to use fault- or preempt-fence mode for long-running
vms depending on the device capabilities. Initially unless fault-mode is
specified, the driver uses preempt-fence mode.
v2:
- Fix commit message wording and the documentation around
CREATE_FLAG_LR_MODE and CREATE_FLAG_FAULT_MODE
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although the exec ioctl is a very important one, it makes no sense
to explain xe_exec before explaining the exec_queue. So, let's
move this down to help bring a better flow on the documentation
and code readability.
It is important to highlight that this patch is changing all
the ioctl numbers in a non-backward compatible way. However, we
are doing this final uapi clean-up before we submit our first
pull-request to be part of the upstream Kernel. Once we get
there, no other change like this will ever happen and all the
backward compatibility will be respected.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Let's respect Documentation/process/botching-up-ioctls.rst
and add the proper padding for a 64b alignment with all as
well as all the required checks and settings for the pads
and the reserved entries.
v2: Fix remaining holes and double check with pahole (Jose)
Ensure with pahole that both 32b and 64b have exact same
layout (Thomas)
Do not set query's pad and reserved bits to zero since it
is redundant and already done by kzalloc (Matt)
v3: Fix alignment after rebase (José Roberto de Souza)
v4: Fix pad check (Francois Dugast)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
As an information only. So Userspace can use this information
and be able to correlate different GTs.
Make API symmetric between Engine and GT info.
There's no need right now to include a tile_query entry
since there's no other information that we need from tile
that is not already exposed through different queries.
However, this could be added later if we have different Tile
information that could matter to userspace. But let's keep
the API ready for a direct reference to Tile ID based on
the GT entry.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
First of all, let's remove the duplication.
But also, let's rename it to remove the word 'frequency'
out of it. In general, the first thing people think of frequency
is the frequency in which the GTs are operating to execute the
GPU instructions.
While this frequency here is a crystal reference clock frequency
which is the base of everything else, and in this case of this
uAPI it is used to calculate a better and precise timestamp.
v2: (Suggested by Jose) Remove the engine_cs and keep the GT info one
since it might be useful for other SRIOV cases where the engine_cs
will be zeroed. So, grabbing from the GT_LIST should be cleaner.
v3: Keep comment on put_user() call (José Roberto de Souza)
Cc: Matt Roper <matthew.d.roper@intel.com>
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
It is currently unused, so by the rules it cannot go upstream.
Also there was the desire to convert that to align with the
engine_class_instance selection, but the consensus on that one
is to remain with the global gt_id. So we are keeping the gt_id
there, not converting to a generic sched_group and also killing
this tile_mask and only using the default behavior of 0 that is
to create a mapping / page_table entry on every tile, similar
to what i915.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Let's continue on the uapi clean-up with more splits
with stuff into their own exclusive fields instead of
reusing stuff.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. Fix this for engines by applying the pattern below:
struct drm_xe_query_Xs {
__u32 num_Xs;
struct drm_xe_X Xs[];
...
}
Instead of directly returning an array of struct
drm_xe_query_engine_info, a new struct drm_xe_query_engines is
introduced. It contains itself an array of struct drm_xe_engine
which holds the information about each engine.
v2: Use plural for struct drm_xe_query_engines as multiple engines
are returned (José Roberto de Souza)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. However, aligning on the new common pattern:
struct drm_xe_query_Xs {
__u32 num_Xs;
struct drm_xe_X Xs[];
...
}
... would mean bringing back the name "gts" which is avoided per commit
fca54ba12470 ("drm/xe/uapi: Rename gts to gt_list") so make an exception
for gt and leave gt_list. Also, this change removes "query" in the
name of struct drm_xe_query_gt as it is not returned from the query
IOCTL. There is no functional change.
v2: Leave gt_list (Matt Roper)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. Fix this for memory regions by applying the pattern below:
struct drm_xe_query_Xs {
__u32 num_Xs;
struct drm_xe_X Xs[];
...
}
This removes "query" in the name of struct drm_xe_query_mem_region
as it is not returned from the query IOCTL. There is no functional
change.
v2: Only rename drm_xe_query_mem_region to drm_xe_mem_region
(José Roberto de Souza)
v3: Rename usage to mem_regions in xe_query.c (José Roberto de Souza)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For xe bo creation we request passing size which matches system or
vram minimum page alignment. This way we want to ensure userspace
is aware of region constraints and not aligned allocations will be
rejected returning EINVAL.
v2:
- Rebase, Update uAPI documentation. (Thomas)
v3:
- Adjust the dma-buf kunit test accordingly. (Thomas)
v4:
- Fixed rebase conflicts and updated commit message. (Francois)
Signed-off-by: Mauro Carvalho Chehab <mauro.chehab@linux.intel.com>
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
