30f7c59124
666 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Arnaldo Carvalho de Melo
|
d7a07b2932 |
perf trace: Resolve prctl's 'option' arg strings to numbers
# perf trace -e syscalls:sys_enter_prctl --filter="option==SET_NAME" 0.000 Socket Thread/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8) 0.053 SSL Cert #78/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8) ^C # If one uses '-v' with 'perf trace', we can see the filter it puts in place: New filter for syscalls:sys_enter_prctl: (option==0xf) && (common_pid != 3859 && common_pid != 2757) We still need to allow using plain '-e prctl' and have this turn into creating a 'syscalls:sys_enter_prctl' event so that the filter can be applied only to it as right now '-e prctl' ends up using the 'raw_syscalls:sys_enter/sys_exit'. The end goal is to have something like: # perf trace -e prctl/option==SET_NAME/ And have that use tracepoint filters or eBPF ones. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ian Rogers
|
a910e4666d |
perf parse: Report initial event parsing error
Record the first event parsing error and report. Implementing feedback from Jiri Olsa: https://lkml.org/lkml/2019/10/28/680 An example error is: $ tools/perf/perf stat -e c/c/ WARNING: multiple event parsing errors event syntax error: 'c/c/' \___ unknown term valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore Initial error: event syntax error: 'c/c/' \___ Cannot find PMU `c'. Missing kernel support? Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
27198a893b |
perf trace: Use STUL_STRARRAY_FLAGS with mmap
The 'mmap' syscall has special needs so it doesn't use SCA_STRARRAY_FLAGS, see its implementation in syscall_arg__scnprintf_mmap_flags(), related to special handling of MAP_ANONYMOUS, so set ->parm to the strarray__mmap_flags and hook up with strarray__strtoul_flags manually, now we can filter by those or-ed string expressions: # perf trace -e syscalls:sys_enter_mmap sleep 1 0.000 syscalls:sys_enter_mmap(addr: NULL, len: 134346, prot: READ, flags: PRIVATE, fd: 3, off: 0) 0.026 syscalls:sys_enter_mmap(addr: NULL, len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) 0.036 syscalls:sys_enter_mmap(addr: NULL, len: 1857472, prot: READ, flags: PRIVATE|DENYWRITE, fd: 3, off: 0) 0.046 syscalls:sys_enter_mmap(addr: 0x7fae003d9000, len: 1363968, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x22000) 0.052 syscalls:sys_enter_mmap(addr: 0x7fae00526000, len: 311296, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x16f000) 0.055 syscalls:sys_enter_mmap(addr: 0x7fae00573000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bb000) 0.062 syscalls:sys_enter_mmap(addr: 0x7fae00579000, len: 14272, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) 0.253 syscalls:sys_enter_mmap(addr: NULL, len: 217750512, prot: READ, flags: PRIVATE, fd: 3, off: 0) # # perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|FIXED|DENYWRITE" sleep 1 0.000 syscalls:sys_enter_mmap(addr: 0x7f6ab3dcb000, len: 1363968, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x22000) 0.010 syscalls:sys_enter_mmap(addr: 0x7f6ab3f18000, len: 311296, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x16f000) 0.014 syscalls:sys_enter_mmap(addr: 0x7f6ab3f65000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bb000) # perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|ANONYMOUS" sleep 1 0.000 syscalls:sys_enter_mmap(addr: NULL, len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) # # perf trace -v -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|ANONYMOUS" sleep 1 |& grep "New filter" New filter for syscalls:sys_enter_mmap: flags==0x22 # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-czw754b7m9rp9ibq2f6be2o1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
e0712baa00 |
perf trace: Wire up strarray__strtoul_flags()
Now anything that uses STRARRAY_FLAGS, like the 'fsmount' syscall will support mapping or-ed strings back to a value that can be used in a filter. In some cases, where STRARRAY_FLAGS isn't used but instead the scnprintf is a special one because of specific needs, like for mmap, then one has to set the ->pars to the strarray. See the next cset. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-r2lpqo7dfsrhi4ll0npsb3u7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
154c978d48 |
libbeauty: Introduce strarray__strtoul_flags()
Counterpart of strarray__scnprintf_flags(), i.e. from a expression like: # perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|FIXED|DENYWRITE" I.e. that "flags==PRIVATE|FIXED|DENYWRITE", turn that into # perf trace -e syscalls:sys_enter_mmap --filter=0x812 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-8xst3zrqqogax7fmfzwymvbl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
82c38338e0 |
perf trace: Use strtoul for the fcntl 'cmd' argument
Since its values are in two ranges of values we ended up codifying it using a 'struct strarrays', so now hook it up with STUL_STRARRAYS so that we can do: # perf trace -e syscalls:*enter_fcntl --filter=cmd==SETLK||cmd==SETLKW 0.000 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4dee0) 1.523 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de90) 1.629 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de90) 2.711 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de70) ^C# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-mob96wyzri4r3rvyigqfjv0a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
1a8a90b823 |
libbeauty: Introduce syscall_arg__strtoul_strarrays()
To allow going from string to integer for 'struct strarrays'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-b1ia3xzcy72hv0u4m168fcd0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
9afec87ec1 |
perf trace: Pass a syscall_arg to syscall_arg_fmt->strtoul()
With just what we need for the STUL_STRARRAY, i.e. the 'struct strarray' pointer to be used, just like with syscall_arg_fmt->scnprintf() for the other direction (number -> string). With this all the strarrays that are associated with syscalls can be used with '-e syscalls:sys_enter_SYSCALLNAME --filter', and soon will be possible as well to use with the strace-like shorter form, with just the syscall names, i.e. something like: -e lseek/whence==END/ For now we have to use the longer form: # perf trace -e syscalls:sys_enter_lseek 0.000 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR) 0.031 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR) 0.046 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR) 5003.528 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR) 5003.575 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR) 5003.593 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR) 10002.017 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR) 10002.051 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR) 10002.068 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR) ^C# perf trace -e syscalls:sys_enter_lseek --filter="whence!=CUR" 0.000 sshd/24476 syscalls:sys_enter_lseek(fd: 3, offset: 9032, whence: SET) 0.060 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 9032, whence: SET) 0.187 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 118632, whence: SET) 0.203 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 118632, whence: SET) 0.349 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 61936, whence: SET) ^C# And for those curious about what are those lseek(DSO, offset, SET), well, its the loader: # perf trace -e syscalls:sys_enter_lseek/max-stack=16/ --filter="whence!=CUR" 0.000 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 9032, whence: SET) __libc_lseek64 (/usr/lib64/ld-2.29.so) _dl_map_object (/usr/lib64/ld-2.29.so) 0.067 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 9032, whence: SET) __libc_lseek64 (/usr/lib64/ld-2.29.so) _dl_map_object_from_fd (/usr/lib64/ld-2.29.so) _dl_map_object (/usr/lib64/ld-2.29.so) 0.198 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 118632, whence: SET) __libc_lseek64 (/usr/lib64/ld-2.29.so) _dl_map_object (/usr/lib64/ld-2.29.so) 0.219 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 118632, whence: SET) __libc_lseek64 (/usr/lib64/ld-2.29.so) _dl_map_object_from_fd (/usr/lib64/ld-2.29.so) _dl_map_object (/usr/lib64/ld-2.29.so) ^C# :-) With this we can use strings in strarrays in filters, which allows us to reuse all these that are in place for syscalls: $ find tools/perf/trace/beauty/ -name "*.c" | xargs grep -w DEFINE_STRARRAY tools/perf/trace/beauty/fcntl.c: static DEFINE_STRARRAY(fcntl_setlease, "F_"); tools/perf/trace/beauty/mmap.c: static DEFINE_STRARRAY(mmap_flags, "MAP_"); tools/perf/trace/beauty/mmap.c: static DEFINE_STRARRAY(madvise_advices, "MADV_"); tools/perf/trace/beauty/sync_file_range.c: static DEFINE_STRARRAY(sync_file_range_flags, "SYNC_FILE_RANGE_"); tools/perf/trace/beauty/socket.c: static DEFINE_STRARRAY(socket_ipproto, "IPPROTO_"); tools/perf/trace/beauty/mount_flags.c: static DEFINE_STRARRAY(mount_flags, "MS_"); tools/perf/trace/beauty/pkey_alloc.c: static DEFINE_STRARRAY(pkey_alloc_access_rights, "PKEY_"); tools/perf/trace/beauty/sockaddr.c:DEFINE_STRARRAY(socket_families, "PF_"); tools/perf/trace/beauty/tracepoints/x86_irq_vectors.c:static DEFINE_STRARRAY(x86_irq_vectors, "_VECTOR"); tools/perf/trace/beauty/tracepoints/x86_msr.c:static DEFINE_STRARRAY(x86_MSRs, "MSR_"); tools/perf/trace/beauty/prctl.c: static DEFINE_STRARRAY(prctl_options, "PR_"); tools/perf/trace/beauty/prctl.c: static DEFINE_STRARRAY(prctl_set_mm_options, "PR_SET_MM_"); tools/perf/trace/beauty/fspick.c: static DEFINE_STRARRAY(fspick_flags, "FSPICK_"); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(ioctl_tty_cmd, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(drm_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(sndrv_pcm_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(sndrv_ctl_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(kvm_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(vhost_virtio_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(vhost_virtio_ioctl_read_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(perf_ioctl_cmds, ""); tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(usbdevfs_ioctl_cmds, ""); tools/perf/trace/beauty/fsmount.c: static DEFINE_STRARRAY(fsmount_attr_flags, "MOUNT_ATTR_"); tools/perf/trace/beauty/renameat.c: static DEFINE_STRARRAY(rename_flags, "RENAME_"); tools/perf/trace/beauty/kcmp.c: static DEFINE_STRARRAY(kcmp_types, "KCMP_"); tools/perf/trace/beauty/move_mount.c: static DEFINE_STRARRAY(move_mount_flags, "MOVE_MOUNT_"); $ Well, some, as the mmap flags are like: $ tools/perf/trace/beauty/mmap_flags.sh static const char *mmap_flags[] = { [ilog2(0x40) + 1] = "32BIT", [ilog2(0x01) + 1] = "SHARED", [ilog2(0x02) + 1] = "PRIVATE", [ilog2(0x10) + 1] = "FIXED", [ilog2(0x20) + 1] = "ANONYMOUS", [ilog2(0x008000) + 1] = "POPULATE", [ilog2(0x010000) + 1] = "NONBLOCK", [ilog2(0x020000) + 1] = "STACK", [ilog2(0x040000) + 1] = "HUGETLB", [ilog2(0x080000) + 1] = "SYNC", [ilog2(0x100000) + 1] = "FIXED_NOREPLACE", [ilog2(0x0100) + 1] = "GROWSDOWN", [ilog2(0x0800) + 1] = "DENYWRITE", [ilog2(0x1000) + 1] = "EXECUTABLE", [ilog2(0x2000) + 1] = "LOCKED", [ilog2(0x4000) + 1] = "NORESERVE", }; $ So we'll need a strarray__strtoul_flags() that will break donw the flags into tokens separated by '|' before doing the lookup and then go on reconstructing the value from, say: # perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|FIXED|DENYWRITE" into: # perf trace -e syscalls:sys_enter_mmap --filter="flags==0x2|0x10|0x0800" and finally into: # perf trace -e syscalls:sys_enter_mmap --filter="flags==0x812" That is what we see if we don't use the augmented view obtained from: # perf trace -e mmap <SNIP> 211792.885 procmail/15393 mmap(addr: 0x7fcd11645000, len: 8192, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 8, off: 0xa000) = 0x7fcd11645000 <SNIP> But plain use tracefs: procmail-15559 [000] .... 54557.178262: sys_mmap(addr: 7f5c9bf7a000, len: 9b000, prot: 1, flags: 812, fd: 3, off: a9000) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c6mgkjt8ujnc263eld5tb7q3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
db25bf98a3 |
perf trace: Honour --max-events in processing syscalls:sys_enter_*
We were doing this only at the sys_exit syscall tracepoint, as for strace-like we count the pair of sys_enter and sys_exit as one event, but when asking specifically for a the syscalls:sys_enter_NAME tracepoint we need to count each of those as an event. I.e. things like: # perf trace --max-events=4 -e syscalls:sys_enter_lseek 0.000 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR) 0.034 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR) 0.051 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR) 2307.900 sshd/30800 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libsystemd.so.0.25.0>, offset: 9032, whence: SET) # Were going on forever, since we only had sys_enter events. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-0ob1dky1a9ijlfrfhxyl40wr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
d066da978f |
libbeauty: Introduce syscall_arg__strtoul_strarray()
To go from strarrays strings to its indexes. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-wta0qvo207z27huib2c4ijxq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
362222f877 |
perf trace: Initialize evsel_trace->fmt for syscalls:sys_enter_* tracepoints
From the syscall_fmts->arg entries for formatting strace-like syscalls. This is when resolving the string "whence" on a filter expression for the syscalls:sys_enter_lseek: Breakpoint 3, perf_evsel__syscall_arg_fmt (evsel=0xc91ed0, arg=0x7fffffff7cd0 "whence") at builtin-trace.c:3626 3626 { (gdb) n 3628 struct syscall_arg_fmt *fmt = __evsel__syscall_arg_fmt(evsel); (gdb) n 3630 if (evsel->tp_format == NULL || fmt == NULL) (gdb) n 3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt) (gdb) n 3634 if (strcmp(field->name, arg) == 0) (gdb) p field->name $3 = 0xc945e0 "__syscall_nr" (gdb) n 3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt) (gdb) p *fmt $4 = {scnprintf = 0x0, strtoul = 0x0, mask_val = 0x0, parm = 0x0, name = 0x0, nr_entries = 0, show_zero = false} (gdb) n 3634 if (strcmp(field->name, arg) == 0) (gdb) p field->name $5 = 0xc94690 "fd" (gdb) n 3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt) (gdb) n 3634 if (strcmp(field->name, arg) == 0) (gdb) n 3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt) (gdb) n 3634 if (strcmp(field->name, arg) == 0) (gdb) p *fmt $9 = {scnprintf = 0x489be2 <syscall_arg__scnprintf_strarray>, strtoul = 0x0, mask_val = 0x0, parm = 0xa2da80 <strarray.whences>, name = 0x0, nr_entries = 0, show_zero = false} (gdb) p field->name $10 = 0xc947b0 "whence" (gdb) p fmt->parm $11 = (void *) 0xa2da80 <strarray.whences> (gdb) p *(struct strarray *)fmt->parm $12 = {offset = 0, nr_entries = 5, prefix = 0x724d37 "SEEK_", entries = 0xa2da40 <whences>} (gdb) p (struct strarray *)fmt->parm)->entries Junk after end of expression. (gdb) p ((struct strarray *)fmt->parm)->entries $13 = (const char **) 0xa2da40 <whences> (gdb) p ((struct strarray *)fmt->parm)->entries[0] $14 = 0x724d21 "SET" (gdb) p ((struct strarray *)fmt->parm)->entries[1] $15 = 0x724d25 "CUR" (gdb) p ((struct strarray *)fmt->parm)->entries[2] $16 = 0x724d29 "END" (gdb) p ((struct strarray *)fmt->parm)->entries[2] $17 = 0x724d29 "END" (gdb) p ((struct strarray *)fmt->parm)->entries[3] $18 = 0x724d2d "DATA" (gdb) p ((struct strarray *)fmt->parm)->entries[4] $19 = 0x724d32 "HOLE" (gdb) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-lc8h9jgvbnboe0g7ic8tra1y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
2b00bb627f |
perf trace: Introduce 'struct evsel__trace' for evsel->priv needs
For syscalls we need to cache the 'syscall_id' and 'ret' field offsets but as well have a pointer to the syscall_fmt_arg array for the fields, so that we can expand strings in filter expressions, so introduce a 'struct evsel_trace' to have in evsel->priv that allows for that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-hx8ukasuws5sz6rsar73cocv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
8b913df50f |
perf trace: Hide evsel->access further, simplify code
Next step will be to have a 'struct evsel_trace' to allow for handling the syscalls tracepoints via the strace-like code while reusing parts of that code with the other tracepoints, where we don't have things like the 'syscall_nr' or 'ret' ((raw_)?syscalls:sys_{enter,exit}(_SYSCALL)?) args that we want to cache offsets and have been using evsel->priv for that, while for the other tracepoints we'll have just an array of 'struct syscall_arg_fmt' (i.e. ->scnprint() for number->string and ->strtoul() string->number conversions and other state those functions need). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-fre21jbyoqxmmquxcho7oa0x@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
fecd990720 |
perf trace: Introduce accessors to trace specific evsel->priv
We're using evsel->priv in syscalls:sys_{enter,exit}_SYSCALL and in raw_syscalls:sys_{enter,exit} to cache the offset of the common fields, the multiplexor id/syscall_id in the sys_enter case and syscall_id + ret for sys_exit. And for the rest of the tracepoints we use it to have a syscall_arg_fmt array to have scnprintf/strtoul for tracepoint args. So we better clearly mark them with accessors so that we can move to having a 'struct evsel_trace' struct for all 'perf trace' specific evsel->priv usage. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-dcoyxfslg7atz821tz9aupjh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
3cdc8db91e |
perf trace: Show error message when not finding a field used in a filter expression
It was there, but as pr_debug(), make it pr_err() so that we can see it without -v: # trace -e syscalls:*lseek --filter="whenc==SET" sleep 1 "whenc" not found in "syscalls:sys_enter_lseek", can't set filter "whenc==SET" # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ly4rgm1bto8uwc2itpaixjob@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
df604bfda6 |
perf trace: Hook the 'vec' tracepoint argument with the x86 IRQ vectors scnprintf/strtoul
Ended up only being useful when filtering multiple irq_vectors tracepoints, as we end up having a tracepoint for each of the entries, i.e.: This will always come with the "RESCHEDULE_VECTOR" in the 'vector' arg: # perf trace --max-events 8 -e irq_vectors:reschedule* 0.000 cc1/29067 irq_vectors:reschedule_entry(vector: RESCHEDULE) 0.004 cc1/29067 irq_vectors:reschedule_exit(vector: RESCHEDULE) 0.553 cc1/29067 irq_vectors:reschedule_entry(vector: RESCHEDULE) 0.556 cc1/29067 irq_vectors:reschedule_exit(vector: RESCHEDULE) 1.182 cc1/29067 irq_vectors:reschedule_entry(vector: RESCHEDULE) 1.185 cc1/29067 irq_vectors:reschedule_exit(vector: RESCHEDULE) 1.203 :29052/29052 irq_vectors:reschedule_entry(vector: RESCHEDULE) 1.206 :29052/29052 irq_vectors:reschedule_exit(vector: RESCHEDULE) # While filtering that value will produce nothing: # perf trace --max-events 8 -e irq_vectors:reschedule* --filter="vector != RESCHEDULE" ^C# Maybe it'll be useful for those other tracepoints: # perf list irq_vectors:vector_* List of pre-defined events (to be used in -e): irq_vectors:vector_activate [Tracepoint event] irq_vectors:vector_alloc [Tracepoint event] irq_vectors:vector_alloc_managed [Tracepoint event] irq_vectors:vector_clear [Tracepoint event] irq_vectors:vector_config [Tracepoint event] irq_vectors:vector_deactivate [Tracepoint event] irq_vectors:vector_free_moved [Tracepoint event] irq_vectors:vector_reserve [Tracepoint event] irq_vectors:vector_reserve_managed [Tracepoint event] irq_vectors:vector_setup [Tracepoint event] irq_vectors:vector_teardown [Tracepoint event] irq_vectors:vector_update [Tracepoint event] # But since we have it done, keep it. This at least served to teach me that all those irq vectors have a entry and an exit tracepoint that I can then use just like with raw_syscalls:sys_{enter,exit}, i.e. pair them, use just a trace__irq_vectors_entry() + trace__irq_vectors_exit() and use the 'vector' arg as I use the 'syscall id' one for syscalls. Then the default for 'perf trace' will include irq_vectors in addition to syscalls. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-wer4cwbbqub3o7sa8h1j3uzb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
97c2a7806f |
libbeauty: Add a strarray__scnprintf_suffix() method
In some cases, like with x86 IRQ vectors, the common part in names is at the end, so a suffix, add a scnprintf function for that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-agxbj6es2ke3rehwt4gkdw23@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
c5e006cdbd |
perf trace: Support tracepoint dynamic char arrays
Things like: # grep __data_loc /sys/kernel/debug/tracing/events/sched/sched_process_exec/format field:__data_loc char[] filename; offset:8; size:4; signed:1; # That, at that offset (8) and with that size(8) have an integer that contains the real length and offset for the contents of that array. Now this works: # perf trace --max-events 1 -e sched:*exec -a 0.000 sed/19441 sched:sched_process_exec(filename: "/usr/bin/sync", pid: 19441 (sync), old_pid: 19441 (sync)) # As when using the libtraceevent based beautifier: # perf trace --libtraceevent --max-events 1 -e sched:*exec -a 0.000 sync/19463 sched:sched_process_exec(filename=/usr/bin/sync pid=19463 old_pid=19463) # I.e. that 'filename' is implemented as a dynamic char array. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-950p0m842fe6n7sxsdwqj5i2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
7fbfe22cf4 |
perf trace: Filter own pid to avoid a feedback look in 'perf trace record -a'
When doing a system wide 'perf trace record' we need, just like in 'perf trace' live mode, to filter out perf trace's own pid, so set up a tracepoint filter for the raw_syscalls tracepoints right after adding them to the argv array that is set up to then call cmd_record(). Reported-by: Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-uysx5w8f2y5ndoln5cq370tv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
b88b14db21 |
perf trace: Introduce --errno-summary
To be used with -S or -s, using just this new option implies -s, examples: # perf trace --errno-summary sleep 1 Summary of events: sleep (10793), 80 events, 93.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ nanosleep 1 0 1000.427 1000.427 1000.427 1000.427 0.00% mmap 8 0 0.026 0.002 0.003 0.005 9.18% close 5 0 0.018 0.001 0.004 0.009 48.97% mprotect 4 0 0.017 0.003 0.004 0.006 16.49% openat 3 0 0.012 0.003 0.004 0.005 9.41% munmap 1 0 0.010 0.010 0.010 0.010 0.00% brk 4 0 0.005 0.001 0.001 0.002 22.77% read 4 0 0.005 0.001 0.001 0.002 22.33% access 1 1 0.004 0.004 0.004 0.004 0.00% ENOENT: 1 fstat 3 0 0.004 0.001 0.001 0.002 17.18% lseek 3 0 0.003 0.001 0.001 0.001 11.62% arch_prctl 2 1 0.002 0.001 0.001 0.001 3.32% EINVAL: 1 execve 1 0 0.000 0.000 0.000 0.000 0.00% # Works as well together with --failure and -S, i.e. collect the stats and show just the syscalls that failed: # perf trace --failure -S --errno-summary sleep 1 0.032 arch_prctl(option: 0x3001, arg2: 0x7fffdb11b580) = -1 EINVAL (Invalid argument) 0.045 access(filename: "/etc/ld.so.preload", mode: R) = -1 ENOENT (No such file or directory) Summary of events: sleep (10806), 80 events, 93.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ nanosleep 1 0 1000.094 1000.094 1000.094 1000.094 0.00% mmap 8 0 0.026 0.002 0.003 0.005 9.06% close 5 0 0.018 0.001 0.004 0.010 49.58% mprotect 4 0 0.017 0.003 0.004 0.006 17.56% openat 3 0 0.014 0.004 0.005 0.006 12.29% munmap 1 0 0.010 0.010 0.010 0.010 0.00% brk 4 0 0.005 0.001 0.001 0.002 22.75% read 4 0 0.005 0.001 0.001 0.002 17.19% access 1 1 0.005 0.005 0.005 0.005 0.00% ENOENT: 1 fstat 3 0 0.004 0.001 0.001 0.002 21.66% lseek 3 0 0.003 0.001 0.001 0.001 11.71% arch_prctl 2 1 0.002 0.001 0.001 0.001 2.66% EINVAL: 1 execve 1 0 0.000 0.000 0.000 0.000 0.00% # Suggested-by: Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-l0mjwczkpouov7lss5zn8d9h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
8eded45fcd |
perf trace: Add syscall failure stats to -s/--summary and -S/--with-summary
Just like strace has: # trace -s sleep 1 Summary of events: sleep (32370), 80 events, 93.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ nanosleep 1 0 1000.402 1000.402 1000.402 1000.402 0.00% mmap 8 0 0.023 0.002 0.003 0.004 8.49% close 5 0 0.015 0.001 0.003 0.009 51.39% mprotect 4 0 0.014 0.002 0.003 0.005 16.95% openat 3 0 0.013 0.003 0.004 0.005 14.29% munmap 1 0 0.010 0.010 0.010 0.010 0.00% read 4 0 0.005 0.001 0.001 0.002 16.83% brk 4 0 0.004 0.001 0.001 0.002 20.82% access 1 1 0.004 0.004 0.004 0.004 0.00% fstat 3 0 0.003 0.001 0.001 0.001 12.17% lseek 3 0 0.003 0.001 0.001 0.001 11.45% arch_prctl 2 1 0.002 0.001 0.001 0.001 2.30% execve 1 0 0.000 0.000 0.000 0.000 0.00% # # perf trace -S sleep 1 ? ... [continued]: execve()) = 0 0.028 brk(brk: NULL) = 0x559f5bd96000 0.033 arch_prctl(option: 0x3001, arg2: 0x7ffda8b715a0) = -1 EINVAL (Invalid argument) 0.046 access(filename: "/etc/ld.so.preload", mode: R) = -1 ENOENT (No such file or directory) 0.055 openat(dfd: CWD, filename: "/etc/ld.so.cache", flags: RDONLY|CLOEXEC) = 3 0.060 fstat(fd: 3, statbuf: 0x7ffda8b707a0) = 0 0.062 mmap(addr: NULL, len: 134346, prot: READ, flags: PRIVATE, fd: 3, off: 0) = 0x7f3aedfc4000 0.066 close(fd: 3) = 0 0.079 openat(dfd: CWD, filename: "/lib64/libc.so.6", flags: RDONLY|CLOEXEC) = 3 0.085 read(fd: 3, buf: 0x7ffda8b70948, count: 832) = 832 0.088 lseek(fd: 3, offset: 792, whence: SET) = 792 0.090 read(fd: 3, buf: 0x7ffda8b70810, count: 68) = 68 0.093 fstat(fd: 3, statbuf: 0x7ffda8b707f0) = 0 0.095 mmap(addr: NULL, len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) = 0x7f3aedfc2000 0.101 lseek(fd: 3, offset: 792, whence: SET) = 792 0.103 read(fd: 3, buf: 0x7ffda8b70450, count: 68) = 68 0.105 lseek(fd: 3, offset: 864, whence: SET) = 864 0.107 read(fd: 3, buf: 0x7ffda8b70470, count: 32) = 32 0.110 mmap(addr: NULL, len: 1857472, prot: READ, flags: PRIVATE|DENYWRITE, fd: 3, off: 0) = 0x7f3aeddfc000 0.114 mprotect(start: 0x7f3aede1e000, len: 1679360, prot: NONE) = 0 0.121 mmap(addr: 0x7f3aede1e000, len: 1363968, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x22000) = 0x7f3aede1e000 0.127 mmap(addr: 0x7f3aedf6b000, len: 311296, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x16f000) = 0x7f3aedf6b000 0.131 mmap(addr: 0x7f3aedfb8000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bb000) = 0x7f3aedfb8000 0.138 mmap(addr: 0x7f3aedfbe000, len: 14272, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) = 0x7f3aedfbe000 0.147 close(fd: 3) = 0 0.158 arch_prctl(option: SET_FS, arg2: 0x7f3aedfc3580) = 0 0.210 mprotect(start: 0x7f3aedfb8000, len: 16384, prot: READ) = 0 0.230 mprotect(start: 0x559f5b27d000, len: 4096, prot: READ) = 0 0.236 mprotect(start: 0x7f3aee00f000, len: 4096, prot: READ) = 0 0.240 munmap(addr: 0x7f3aedfc4000, len: 134346) = 0 0.300 brk(brk: NULL) = 0x559f5bd96000 0.302 brk(brk: 0x559f5bdb7000) = 0x559f5bdb7000 0.305 brk(brk: NULL) = 0x559f5bdb7000 0.310 openat(dfd: CWD, filename: "/usr/lib/locale/locale-archive", flags: RDONLY|CLOEXEC) = 3 0.315 fstat(fd: 3, statbuf: 0x7f3aedfbdac0) = 0 0.318 mmap(addr: NULL, len: 217750512, prot: READ, flags: PRIVATE, fd: 3, off: 0) = 0x7f3ae0e52000 0.325 close(fd: 3) = 0 0.358 nanosleep(rqtp: 0x7ffda8b714b0, rmtp: NULL) = 0 1000.622 close(fd: 1) = 0 1000.641 close(fd: 2) = 0 1000.664 exit_group(error_code: 0) = ? Summary of events: sleep (722), 80 events, 93.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ nanosleep 1 0 1000.194 1000.194 1000.194 1000.194 0.00% mmap 8 0 0.025 0.002 0.003 0.005 10.17% close 5 0 0.018 0.001 0.004 0.010 50.18% mprotect 4 0 0.016 0.003 0.004 0.006 16.81% openat 3 0 0.011 0.003 0.004 0.004 6.57% munmap 1 0 0.010 0.010 0.010 0.010 0.00% brk 4 0 0.005 0.001 0.001 0.002 20.72% read 4 0 0.005 0.001 0.001 0.002 16.71% access 1 1 0.005 0.005 0.005 0.005 0.00% fstat 3 0 0.004 0.001 0.001 0.002 14.82% lseek 3 0 0.003 0.001 0.001 0.001 11.66% arch_prctl 2 1 0.002 0.001 0.001 0.001 3.59% execve 1 0 0.000 0.000 0.000 0.000 0.00% # Works for system wide, e.g. for 1ms: # perf trace -s -a sleep 0.001 Summary of events: sleep (768), 94 events, 37.9% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ nanosleep 1 0 1.133 1.133 1.133 1.133 0.00% execve 7 6 0.351 0.003 0.050 0.316 88.53% mmap 8 0 0.024 0.002 0.003 0.004 8.86% mprotect 4 0 0.017 0.003 0.004 0.006 16.02% openat 3 0 0.013 0.004 0.004 0.005 8.34% munmap 1 0 0.010 0.010 0.010 0.010 0.00% brk 4 0 0.007 0.001 0.002 0.002 10.99% close 5 0 0.005 0.001 0.001 0.002 11.69% read 5 0 0.005 0.000 0.001 0.002 30.53% access 1 1 0.004 0.004 0.004 0.004 0.00% fstat 3 0 0.004 0.001 0.001 0.002 10.74% lseek 3 0 0.003 0.001 0.001 0.001 10.20% arch_prctl 2 1 0.002 0.001 0.001 0.001 3.34% Web Content (21258), 46 events, 18.5% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ recvmsg 12 12 0.015 0.001 0.001 0.002 8.50% futex 2 0 0.008 0.003 0.004 0.005 27.08% poll 6 0 0.006 0.000 0.001 0.002 22.14% read 2 0 0.006 0.002 0.003 0.003 26.08% write 1 0 0.002 0.002 0.002 0.002 0.00% Web Content (4365), 36 events, 14.5% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ recvmsg 10 10 0.015 0.001 0.002 0.003 11.83% poll 5 0 0.006 0.000 0.001 0.002 28.44% futex 2 0 0.005 0.001 0.003 0.004 48.29% read 1 0 0.003 0.003 0.003 0.003 0.00% Timer (21275), 14 events, 5.6% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ futex 6 1 0.240 0.000 0.040 0.149 64.58% write 1 0 0.008 0.008 0.008 0.008 0.00% Timer (4383), 14 events, 5.6% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ futex 6 2 0.186 0.000 0.031 0.181 96.45% write 1 0 0.010 0.010 0.010 0.010 0.00% Web Content (20354), 28 events, 11.3% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ recvmsg 8 8 0.010 0.001 0.001 0.002 15.24% poll 4 0 0.004 0.000 0.001 0.002 35.68% futex 1 0 0.003 0.003 0.003 0.003 0.00% read 1 0 0.003 0.003 0.003 0.003 0.00% Timer (20371), 10 events, 4.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ futex 4 1 0.077 0.000 0.019 0.075 95.46% write 1 0 0.005 0.005 0.005 0.005 0.00% [root@quaco ~]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-k7kh2muo5oeg56yx446hnw9v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
151ed5d70d |
libperf: Adopt perf_mmap__read_event() from tools/perf
Move perf_mmap__read_event() from tools/perf to libperf and export it in the perf/mmap.h header. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191007125344.14268-13-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
32fdc2ca7e |
libperf: Adopt perf_mmap__read_done() from tools/perf
Move perf_mmap__read_init() from tools/perf to libperf and export it in the perf/mmap.h header. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191007125344.14268-12-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
7c4d41824f |
libperf: Adopt perf_mmap__read_init() from tools/perf
Move perf_mmap__read_init() from tools/perf to libperf and export it in perf/mmap.h header. And add pr_debug2()/pr_debug3() macros support, because the code is using them. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191007125344.14268-11-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
7728fa0cfa |
libperf: Adopt perf_mmap__consume() function from tools/perf
Move perf_mmap__consume() vrom tools/perf to libperf and export it in the perf/mmap.h header. Move also the needed helpers perf_mmap__write_tail(), perf_mmap__read_head() and perf_mmap__empty(). Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191007125344.14268-10-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
728db19886 |
perf beauty: Introduce strtoul() for x86 MSRs
Continuing from the previous cset comment, now that filter expression works: # perf trace -e msr:* --filter="msr!=FS_BASE && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL" --filter-pids 3750 0.000 Timer/5033 msr:write_msr(msr: SYSCALL_MASK, val: 292608) 0.009 Timer/5033 msr:write_msr(msr: LSTAR, val: -1398800368) 0.010 Timer/5033 msr:write_msr(msr: TSC_AUX, val: 4) 0.050 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) 45.661 gnome-terminal/12595 msr:write_msr(msr: SYSCALL_MASK, val: 292608) 45.672 gnome-terminal/12595 msr:write_msr(msr: LSTAR, val: -1398800368) 45.675 gnome-terminal/12595 msr:write_msr(msr: TSC_AUX, val: 3) 54.852 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) 130.508 Timer/4050 msr:write_msr(msr: SYSCALL_MASK, val: 292608) 130.527 Timer/4050 msr:write_msr(msr: LSTAR, val: -1398800368) 130.531 Timer/4050 msr:write_msr(msr: TSC_AUX, val: 3) 140.924 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) 164.738 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) 603.578 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) 620.809 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) 690.115 JS Watchdog/4259 msr:write_msr(msr: SYSCALL_MASK, val: 292608) 690.136 JS Watchdog/4259 msr:write_msr(msr: LSTAR, val: -1398800368) 690.141 JS Watchdog/4259 msr:write_msr(msr: TSC_AUX, val: 3) 690.186 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) 759.016 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) ^C[root@quaco ~]# Or look at the first 3 write_msr events for that IA32_TSC_DEADLINE to learn why it happens so often: # perf trace --max-events=3 --max-stack=8 -e msr:* --filter="msr==IA32_TSC_DEADLINE" --filter-pids 3750 0.000 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 19296732550862) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) lapic_next_deadline ([kernel.kallsyms]) clockevents_program_event ([kernel.kallsyms]) hrtimer_interrupt ([kernel.kallsyms]) smp_apic_timer_interrupt ([kernel.kallsyms]) apic_timer_interrupt ([kernel.kallsyms]) cpuidle_enter_state ([kernel.kallsyms]) 32.646 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 19296800134158) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) lapic_next_deadline ([kernel.kallsyms]) clockevents_program_event ([kernel.kallsyms]) hrtimer_start_range_ns ([kernel.kallsyms]) tick_nohz_restart_sched_tick ([kernel.kallsyms]) tick_nohz_idle_exit ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) 32.802 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 19297507436922) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) lapic_next_deadline ([kernel.kallsyms]) clockevents_program_event ([kernel.kallsyms]) hrtimer_try_to_cancel ([kernel.kallsyms]) hrtimer_cancel ([kernel.kallsyms]) tick_nohz_restart_sched_tick ([kernel.kallsyms]) tick_nohz_idle_exit ([kernel.kallsyms]) # And if some of the strings can't be found: # trace -e msr:* --filter="msr!=SPECULATIVE_EXECUTION_PROBLEMS_SOLUTION && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL" --filter-pids 3750 "SPECULATIVE_EXECUTION_PROBLEMS_SOLUTION" not found for "msr" in "msr:read_msr", can't set filter "(msr!=SPECULATIVE_EXECUTION_PROBLEMS_SOLUTION && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL) && (common_pid != 28131 && common_pid != 3750)" # Next step is to automatically wire up the pre-existing strarrays, which there are quite a few. The strtoul() methods will be further enhanced to allow for looking at other arguments in a syscall/tracepoint, just like going from integer to string (scnprintf methods), so that those "val" lines for the msr tracepoints can be properly formatted or even resolved into some string. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-4qaai5iqjgefd11k4ddm7qg8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
90df0249c2 |
perf trace: Expand strings in filters to integers
So that one can try things like: # perf trace -e msr:* --filter="msr!=FS_BASE && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL" --filter-pids 3750 That, at this point in the patchset, without any strtoul in place for tracepoint arguments, will result in: No resolver (strtoul) for "msr" in "msr:read_msr", can't set filter "(msr!=FS_BASE && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL) && (common_pid != 25407 && common_pid != 3750)" # See you in the next cset! Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-dx5j70fv2rgkeezd1cb3hv2p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
d0a3a10410 |
perf trace: Introduce a strtoul() method for 'struct strarrays'
And also for 'struct strarray', since its needed to implement strarrays__strtoul(). This just traverses the entries and when finding a match, returns (offset + index), i.e. the value associated with the searched string. E.g. "EFER" (MSR_EFER) returns: # grep -w EFER -B2 /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c #define x86_64_specific_MSRs_offset 0xc0000080 static const char *x86_64_specific_MSRs[] = { [0xc0000080 - x86_64_specific_MSRs_offset] = "EFER", # 0xc0000080 This will be auto-attached to 'struct syscall_arg_fmt' entries associated with strarrays as soon as we add a ->strarray and ->strarrays to 'struct syscall_arg_fmt'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-r2hpaahf8lishyb1owko9vs1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
3f41b77843 |
perf trace: Add a strtoul() method to 'struct syscall_arg_fmt'
This will go from a string to a number, so that filter expressions can be constructed with strings and then, before applying the tracepoint filters (or eBPF, in the future) we can map those strings to numbers. The first one will be for 'msr' tracepoint arguments, but real quickly we will be able to reuse all strarrays for that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-wgqq48agcgr95b8dmn6fygtr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
d4097f1937 |
perf trace: Introduce --filter for tracepoint events
Similar to what is in 'perf record', works just like there: # perf trace -e msr:* 328.297 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888) 328.302 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888) 328.306 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888) 328.317 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888) 328.322 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888) 328.327 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888) 328.331 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888) 328.336 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888) 328.340 :0/0 ^Cmsr:write_msr(msr: FS_BASE, val: 140240388381888) # So, for a system wide trace session looking at the write_msr tracepoint we see a flood of MSR_FS_BASE, we need to get the number for that: # grep FS_BASE /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c [0xc0000100 - x86_64_specific_MSRs_offset] = "FS_BASE", # And then use it in a filter: # perf trace -e msr:* --filter="msr!=0xc0000100" <SNIP> 942.177 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3056931068232) 942.199 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3057135655252) 942.203 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3056931068222) 942.231 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3056998373022) 942.241 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3056931068236) <SNIP> # Ok, lets filter that too, too noisy: # grep TSC_DEADLINE /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c [0x000006E0] = "IA32_TSC_DEADLINE", # # perf trace -e msr:* --filter="msr!=0xc0000100 && msr!=0x6e0" -a sleep 0.1 0.000 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) 0.066 CPU 0/KVM/4895 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) 0.070 CPU 0/KVM/4895 msr:write_msr(msr: 0x830, val: 34359740667) 0.099 CPU 0/KVM/4895 msr:read_msr(msr: IA32_SYSENTER_ESP, val: -2199021993472) 0.100 CPU 0/KVM/4895 msr:read_msr(msr: IA32_APICBASE, val: 4276096000) 0.101 CPU 0/KVM/4895 msr:read_msr(msr: IA32_DEBUGCTLMSR) 0.109 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL) 1.000 :0/0 msr:write_msr(msr: 0x830, val: 17179871485) 18.893 :0/0 msr:write_msr(msr: 0x83f, val: 246) 28.810 :0/0 msr:write_msr(msr: 0x830, val: 68719479037) 40.117 CPU 0/KVM/4895 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) 40.127 CPU 0/KVM/4895 msr:read_msr(msr: IA32_DEBUGCTLMSR) 40.139 CPU 0/KVM/4895 msr:write_msr(msr: LSTAR, val: -2130661312) 40.141 CPU 0/KVM/4895 msr:write_msr(msr: SYSCALL_MASK, val: 14080) 40.142 CPU 0/KVM/4895 msr:write_msr(msr: TSC_AUX) 40.144 CPU 0/KVM/4895 msr:write_msr(msr: KERNEL_GS_BASE) 40.147 CPU 0/KVM/4895 msr:write_msr(msr: IA32_SPEC_CTRL) 40.148 CPU 0/KVM/4895 msr:write_msr(msr: IA32_FLUSH_CMD, val: 1) 40.151 CPU 0/KVM/4895 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) ^C # One can combine that with filtering pids as well: # perf trace -e msr:* --filter="msr!=0xc0000100 && msr!=0x6e0" --filter-pids 4895 -a sleep 0.09 0.000 :0/0 msr:write_msr(msr: 0x830, val: 4294969597) 0.291 gnome-terminal/2790 msr:write_msr(msr: SYSCALL_MASK, val: 292608) 0.294 gnome-terminal/2790 msr:write_msr(msr: LSTAR, val: -1935671280) 0.295 gnome-terminal/2790 msr:write_msr(msr: TSC_AUX, val: 6) 10.940 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597) 15.943 gnome-shell/2096 msr:write_msr(msr: 0x830, val: 4294969597) 16.975 :0/0 msr:write_msr(msr: 0x830, val: 4294969597) 19.560 :0/0 msr:write_msr(msr: 0x83f, val: 246) 25.162 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST) 25.807 JS Watchdog/3635 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) 25.820 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL) 25.941 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597) 26.941 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597) 29.942 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597) 45.313 :0/0 msr:write_msr(msr: 0x83f, val: 246) 56.945 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597) 60.946 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597) 74.096 JS Watchdog/8971 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) 74.130 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL) 79.673 :0/0 msr:write_msr(msr: 0x83f, val: 246) 79.947 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 17179871485) # Or for just a pid, with callchains: # grep SYSCALL_MAS /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c [0xc0000084 - x86_64_specific_MSRs_offset] = "SYSCALL_MASK", # perf trace -e msr:* --filter="msr==0xc0000084" --pid 2790 --call-graph=dwarf 0.000 gnome-terminal/2790 msr:write_msr(msr: SYSCALL_MASK, val: 292608) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) kvm_on_user_return ([kvm]) fire_user_return_notifiers ([kernel.kallsyms]) exit_to_usermode_loop ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64 ([kernel.kallsyms]) __GI___poll (inlined) 9299.073 gnome-terminal/2790 msr:write_msr(msr: SYSCALL_MASK, val: 292608) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) kvm_on_user_return ([kvm]) fire_user_return_notifiers ([kernel.kallsyms]) exit_to_usermode_loop ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64 ([kernel.kallsyms]) __GI___poll (inlined) 9348.374 gnome-terminal/2790 msr:write_msr(msr: SYSCALL_MASK, val: 292608) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) kvm_on_user_return ([kvm]) fire_user_return_notifiers ([kernel.kallsyms]) exit_to_usermode_loop ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64 ([kernel.kallsyms]) __GI___poll (inlined) <SNIP> # Ok, just another form of KVM to emit MSRs :-) Next step: elliminate those greps by getting the filter expression, looking for arg names, then for the arrays associated with it to do a reverse lookup. Also allow those filters to be associated with strace-like syscall names. After that: augment the 'val' arg for 'msr:write_msr' based on the first arg, 'msr'. Then, do that with eBPF too, not just with tracepoint filters. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-95bfe5d4tzy5f66bx49d05rj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
c330ef2847 |
perf trace: Associate the "msr" tracepoint arg name with x86_MSR__scnprintf()
So that we can go from: # perf trace -e msr:write_msr --max-stack=16 sleep 1 0.000 sleep/6740 msr:write_msr(msr: 3221225728, val: 139636317451648) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) do_arch_prctl_64 ([kernel.kallsyms]) __x64_sys_arch_prctl ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64 ([kernel.kallsyms]) init_tls (/usr/lib64/ld-2.29.so) dl_main (/usr/lib64/ld-2.29.so) _dl_sysdep_start (/usr/lib64/ld-2.29.so) _dl_start (/usr/lib64/ld-2.29.so) # To: # perf trace -e msr:write_msr --max-stack=16 sleep 1 0.000 sleep/8519 msr:write_msr(msr: FS_BASE, val: 139878031705472) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) do_arch_prctl_64 ([kernel.kallsyms]) __x64_sys_arch_prctl ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64 ([kernel.kallsyms]) init_tls (/usr/lib64/ld-2.29.so) dl_main (/usr/lib64/ld-2.29.so) _dl_sysdep_start (/usr/lib64/ld-2.29.so) _dl_start (/usr/lib64/ld-2.29.so) # This, in reverse, will allow for symbolic system call/tracepoint filtering. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-q1q4unmqja5ex7dy0kb5cjaa@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
5d88099bc0 |
perf trace: Allow associating scnprintf routines with well known arg names
For instance 'msr' appears in several tracepoints, so we can associate it with a single scnprintf() routine auto-generated from kernel headers, as will be done in followup patches. Start with an empty array of associations. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-89ptht6s5fez82lykuwq1eyb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
f11b2803bb |
perf trace: Allow choosing how to augment the tracepoint arguments
So far we used the libtraceevent printing routines when showing tracepoint arguments, but since 'perf trace' has a lot of beautifiers for syscall arguments, and since some of those can be used to augment tracepoint arguments, add a routine to make use of those beautifiers and allow the user to choose which one to use. The default now is to use the same beautifiers used for the strace-like sys_enter+sys_exit lines, but the user can choose the libtraceevent ones by either using the: perf trace --libtraceevent_print command line option, or by setting: # cat ~/.perfconfig [trace] tracepoint_beautifiers = libtraceevent For instance, here are some examples: # perf trace -e sched:*switch,*sleep,sched:*wakeup,exit*,sched:*exit sleep 1 0.000 sched:sched_wakeup(comm: "perf", pid: 5273 (perf), prio: 120, success: 1, target_cpu: 6) 0.621 nanosleep(rqtp: 0x7ffdd06d1140, rmtp: NULL) ... 0.628 sched:sched_switch(prev_comm: "sleep", prev_pid: 5273 (sleep), prev_prio: 120, prev_state: 1, next_comm: "swapper/6", next_pid: 0, next_prio: 120) 1000.879 sched:sched_wakeup(comm: "sleep", pid: 5273 (sleep), prio: 120, success: 1, target_cpu: 6) 0.621 ... [continued]: nanosleep()) = 0 1001.026 exit_group(error_code: 0) = ? 1001.216 sched:sched_process_exit(comm: "sleep", pid: 5273 (sleep), prio: 120) # And then using libtraceevent, as before: # perf trace --libtraceevent_print -e sched:*switch,*sleep,sched:*wakeup,exit*,sched:*exit sleep 1 0.000 sched:sched_wakeup(comm=perf pid=5288 prio=120 target_cpu=001) 0.739 nanosleep(rqtp: 0x7ffeba6c2f40, rmtp: NULL) ... 0.747 sched:sched_switch(prev_comm=sleep prev_pid=5288 prev_prio=120 prev_state=S ==> next_comm=swapper/1 next_pid=0 next_prio=120) 1000.902 sched:sched_wakeup(comm=sleep pid=5288 prio=120 target_cpu=001) 0.739 ... [continued]: nanosleep()) = 0 1001.012 exit_group(error_code: 0) = ? # The new default allocates an array of 'struct syscall_arg_fmt' for the tracepoint arguments and, just like with syscall arguments, tries to find suitable syscall_arg__scnprintf_NAME() routines to augment those tracepoint arguments based on their type (as in the tracefs "format" file), or even in their name + type, for instance arguntents with names ending in "fd" with type "int" get the fd scnprintf beautifier attached, etc. Soon this will take advantage of the kernel BTF information to augment enumerations based on the tracefs "format" type info. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-o8qdluotkcb3b1x2gjqrejcl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
311baaf93c |
perf trace: Enclose all events argument lists with ()
So that they look a bit like normal strace-like syscall enter+exit lines. They will look even more when we switch from using libtraceevent's tep_print_event() routine in favour of using all the perf beautifiers used by the strace-like syscall enter+exit lines. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-y4fcej6v6u1m644nbxd2r4pg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
9597945d7f |
perf trace: Add array of chars scnprintf beautifier
Needed for sched's traceoints prev/next comm, where, unlike with syscalls, we are not dealing with an integer or pointer, but an array straight out from the ring buffer. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-rlll7tmcqe1g4odtaifil5re@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
888ca854e2 |
perf trace: Add the syscall_arg_fmt pointer to syscall_arg
So that the scnprintf beautifiers can access it, as will be the case with the char array one in the following csets, that needs to know the number of elements in an array. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-01qmjqv6cb1nj1qy4khdexce@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
3e0c9b2cfa |
perf trace: Move some scnprintf methods from syscall to syscall_arg_fmt
Since all they operate on is on a syscall_arg_fmt instance, so move them to allow use it from the upcoming tracepoint fprintf routine. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ynttrs1l75f0x9tk67spd7jd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
947b843cf5 |
perf trace: Allocate an array of beautifiers for tracepoint args
This will work similar to the syscall args, we'll allocate an array of 'struct syscall_arg_fmt' for the tracepoint args and then init them using the same algorithm used for the defaults for syscall args, i.e. using its types and sometimes names as hints to find the right scnprintf routine to beautify them from numbers into strings. Next step is to stop using libtracevent to printf tracepoints, as we'll have more beautifiers than int provides, modulo perhaps some plugins. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-dcl135relxvf6ljisjg13aqg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
8d1d4ff5e2 |
perf trace: Factor out the initialization of syscal_arg_fmt->scnprintf
We set the default scnprint routines for the syscall args based on its type or on heuristics based on its names, now we'll use this for tracepoints as well, so move it out of syscall__set_arg_fmts() and into a routine that receive just an array of syscall_arg_fmt entries + the tracepoint format fields list. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-xs3x0zzyes06c7scdsjn01ty@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
8bd436b006 |
perf trace augmented_syscalls: Do not show syscalls when none was asked for
When not using augmented syscalls, i.e. not passing thru the command line a eBPF source or object file event that provides the __augmented_syscalls__ BPF_MAP_TYPE_PERF_EVENT_ARRAY, etc, as with: perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c or passing that augmented eBPF source/object via the trace.add_events in .perfconfig file, we were assuming that syscalls were asked for, differing from when not using augmented syscalls at all. This is confusing when using .perfconfig to hide the fact we're using the augmenter, i.e. using: # perf trace -e sched:* sleep 1 Will show both the scheduler tracepoints and the syscalls, where what we want is to show just the scheduler tracepoints. To see the scheduler tracepoints and some specific syscall strace-like formatting, one has to use: # perf trace -e sched:*,nanosleep sleep 1 Or, if wanting all the syscalls: # perf trace -e sched:* --syscalls sleep 1 This way 'perf trace' can be used to trace just a set of tracepoints while allowing for mixing with strace-like when desired, by simply adding to the mix the name of the syscalls to show in addition to the tracepoints. Fix it so that the behaviour using the eBPF based syscall augmenter is the same as when not using one. Testing: Before this patch, with this ~/.perfconfig: # egrep -B1 ^[[:space:]]+add_events ~/.perfconfig [trace] add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o # That points to this pre-compiled eBPF syscall augmenter: # file /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o: ELF 64-bit LSB relocatable, eBPF, version 1 (SYSV), with debug_info, not stripped And when asking for _only_ sched:sched_switch and sched:sched_wakeup we were unconditionally getting all the syscalls formatted strace-like: # perf trace -e sched:*switch,sched:*wakeup sleep 1 |& tail 0.633 fstat(3, 0x7fe11d030ac0) = 0 0.635 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe10fec5000 0.643 close(3) = 0 0.668 nanosleep(0x7fff649a3a90, NULL) ... 0.672 sched:sched_switch:prev_comm=sleep prev_pid=4417 prev_prio=120 prev_state=S ==> next_comm=swapper/6 next_pid=0 next_prio=120 1000.822 sched:sched_wakeup:comm=sleep pid=4417 prio=120 target_cpu=006 0.668 ... [continued]: nanosleep()) = 0 1000.923 close(1) = 0 1000.941 close(2) = 0 1000.974 exit_group(0) = ? # After the patch: # perf trace -e sched:*switch,sched:*wakeup sleep 1 0.000 sched:sched_wakeup:comm=perf pid=5529 prio=120 target_cpu=005 1.186 sched:sched_switch:prev_comm=sleep prev_pid=5529 prev_prio=120 prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120 1001.573 sched:sched_wakeup:comm=sleep pid=5529 prio=120 target_cpu=005 # If we add the "open*" syscalls to the mix then the eBPF augmented _will_ be used and these syscalls will be traced together with the specified sched tracepoints: # cd /sys/kernel/debug/tracing/events/syscalls/ # ls -1d sys_enter_open* sys_enter_open sys_enter_openat sys_enter_open_by_handle_at sys_enter_open_tree # # perf trace -e open*,sched:*switch,sched:*wakeup sleep 1 0.000 sched:sched_wakeup:comm=perf pid=5580 prio=120 target_cpu=005 0.590 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 0.616 openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 0.846 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3 0.891 sched:sched_switch:prev_comm=sleep prev_pid=5580 prev_prio=120 prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120 1001.005 sched:sched_wakeup:comm=sleep pid=5580 prio=120 target_cpu=005 # And as we can see, the pathnames were collected via the eBPF augmenters. If we don't specify anything it'll trace all syscalls: # perf trace sleep 1 |& tail 0.299 brk(0x5597543a3000) = 0x5597543a3000 0.302 brk(NULL) = 0x5597543a3000 0.307 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3 0.313 fstat(3, 0x7feece50cac0) = 0 0.315 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7feec13a1000 0.323 close(3) = 0 0.354 nanosleep(0x7ffe338856e0, NULL) = 0 1000.641 close(1) = 0 1000.655 close(2) = 0 1000.673 exit_group(0) = ? # Ditto if we don't use .perfconfig's trace.add_events but instead pass just the augmenter as a command line event: # vim ~/.perfconfig # egrep -B1 ^[[:space:]]+add_events ~/.perfconfig # perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o sleep 1 |& tail 0.294 brk(0x55ae08ec3000) = 0x55ae08ec3000 0.297 brk(NULL) = 0x55ae08ec3000 0.302 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3 0.309 fstat(3, 0x7f726488fac0) = 0 0.311 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7257724000 0.319 close(3) = 0 0.347 nanosleep(0x7ffe23643a70, NULL) = 0 1000.560 close(1) = 0 1000.575 close(2) = 0 1000.593 exit_group(0) = ? # As well as that + some syscall names for strace-like formatting: # perf trace -e socket,connect,/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o ssh localhost 0.000 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 3 0.021 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory) 0.034 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 3 0.041 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory) 0.163 socket(PF_LOCAL, SOCK_STREAM, 0) = 4 0.185 connect(4, { .family: PF_LOCAL, path: /var/lib/sss/pipes/nss }, 110) = 0 0.670 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 7 0.684 connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory) 0.694 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 7 0.701 connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory) 0.994 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 5 1.006 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory) 1.014 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 5 1.022 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory) 1.068 socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 5 1.087 connect(5, { .family: PF_INET, port: 22, addr: 127.0.0.1 }, 16) = 0 24.299 socket(PF_LOCAL, SOCK_STREAM, 0) = 6 24.337 connect(6, { .family: PF_LOCAL, path: /var/run/.heim_org.h5l.kcm-socket }, 110) = 0 28.441 socket(PF_LOCAL, SOCK_STREAM, 0) = 6 28.516 connect(6, { .family: PF_LOCAL, path: /var/run/.heim_org.h5l.kcm-socket }, 110) = 0 root@localhost's password:^C # Everything works without augmenters: # egrep -B1 ^[[:space:]]+add_events ~/.perfconfig # perf trace sleep 1 |& tail 0.261 brk(0x5635068ac000) = 0x5635068ac000 0.264 brk(NULL) = 0x5635068ac000 0.268 openat(AT_FDCWD, 0xdce642a0, O_RDONLY|O_CLOEXEC) = 3 0.275 fstat(3, 0x7f3fdce97ac0) = 0 0.277 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3fcfd2c000 0.284 close(3) = 0 0.310 nanosleep(0x7ffdaea6ecd0, NULL) = 0 1000.552 close(1) = 0 1000.565 close(2) = 0 1000.580 exit_group(0) = ? # # perf trace -e connect ssh localhost 0.000 connect(3, 0x58266930, 110) = -1 ENOENT (No such file or directory) 0.022 connect(3, 0x58266af0, 110) = -1 ENOENT (No such file or directory) 0.150 connect(4, 0x58266b00, 110) = 0 0.490 connect(7, 0x58264150, 110) = -1 ENOENT (No such file or directory) 0.505 connect(7, 0x58264300, 110) = -1 ENOENT (No such file or directory) 0.832 connect(5, 0x58266220, 110) = -1 ENOENT (No such file or directory) 0.847 connect(5, 0x582663e0, 110) = -1 ENOENT (No such file or directory) 0.899 connect(5, 0x95ba0630, 16) = 0 25.619 connect(6, 0x58266360, 110) = 0 40.564 connect(6, 0x58266330, 110) = 0 root@localhost's password: ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-624f6jxic04031tnt40va4dd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
7e035929f3 |
perf trace: Postpone parsing .perfconfig trace.add_events to after --verbose is processed
When we add events via the '[trace]' section in perfconfig the command line options are not yet processed, so when something goes wrong with parsing those events and using --verbose is advised, we end up not getting any more verbosity by doing so. So just copy the trace.add_events string for later processing, after we processed --verbose and the other command line options. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-d6wbnz85ftqljdll6ynjyjd8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
bcddbfc5c8 |
perf trace: Generalize the syscall_fmt find routines
To allow them to be used with other stuff, such as tracepoints. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-od3gzg77ppqgnnrxqv40fvgx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
9b2036cd32 |
perf trace: Separate 'struct syscall_fmt' definition from syscall_fmts variable
As this has all the things needed to format tracepoints events, not just syscalls, that, after all, are just tracepoints with a set in stone ABI, i.e. order and number of parameters. For tracepoints we'll create a static struct syscall_fmt tracepoint_fmts[] array and will fill the ->arg[] entries with the beautifier for each positional argument and record the name, then, when we need it, we'll just check that the position has the same name, maybe even type, so that we can do some check that the tracepoint hasn't changed, if it has, we can even reorder things. Keep calling it syscall_fmt but use it as well for tracepoints, do it this way to minimize changes and reuse what is in place for syscalls, we'll see. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-2x1jgiev13zt4njaanlnne0d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
206d635aa5 |
perf trace: Make evlist__set_evsel_handler() affect just entries without a handler
Renaming it to evlist__set_default_evsel_handler(), to better reflect what we want to do, which is to set a default handler for events we still haven't set a custom handler, like the ones for "msr:write_msr", etc that are coming soon. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-e1bit7upnpmtsayh8039kfuw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
ca1252779f |
perf evsel: Introduce evsel_fprintf.h
We already had evsel_fprintf.c, add its counterpart, so that we can reduce evsel.h a bit more. We needed a new perf_event_attr_fprintf.c file so as to have a separate object to link with the python binding in tools/perf/util/python-ext-sources and not drag symbol_conf, etc into the python binding. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-06bdmt1062d9unzgqmxwlv88@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
9620bc361a |
perf evsel: Remove need for symbol_conf in evsel_fprintf.c
So that we an later link it to the python binding without having to drag the symbol object files. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-8823tveyasocnuoelq4qopwf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
80ab2987a0 |
libperf: Add perf_evlist__poll() function
Move perf_evlist__poll() from tools/perf to libperf, it will be used in the following patches. And rename the existing perf's function to evlist__poll(). Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lore.kernel.org/lkml/20190913132355.21634-39-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
f4009e7bf7 |
libperf: Add perf_evlist__add_pollfd() function
Move perf_evlist__add_pollfd() from tools/perf to libperf, it will be used in the following patches. Also rename perf's perf_evlist__add_pollfd()/perf_evlist__filter_pollfd() to evlist__add_pollfd()/evlist__filter_pollfd(). Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lore.kernel.org/lkml/20190913132355.21634-38-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
515dbe48f6 |
libperf: Add perf_evlist__first()/last() functions
Add perf_evlist__first()/last() functions to libperf, as internal functions and rename perf's origins to evlist__first/last. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lore.kernel.org/lkml/20190913132355.21634-29-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
c976ee11a0 |
libperf: Move 'nr_mmaps' from 'struct evlist' to 'struct perf_evlist'
Moving 'nr_mmaps' from 'struct evlist' to 'struct perf_evlist', it will be used in following patches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lore.kernel.org/lkml/20190913132355.21634-21-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |