IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If the device has a sfp bus attached, call its
sfp_get_module_eeprom_by_page() function, otherwise use the ethtool op
for the device. This follows how the IOCTL works.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case netlink get_module_eeprom_by_page() callback is not implemented
by the driver, try to call old get_module_info() and get_module_eeprom()
pair. Recalculate parameters to get_module_eeprom() offset and len using
page number and their sizes. Return error if this can't be done.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two ways to retrieve information from SFP EEPROMs. Many
devices make use of the common code, and assign the sfp_bus pointer in
the netdev to point to the bus holding the SFP device. Some MAC
drivers directly implement ops in there ethool structure.
Export within net/ethtool the two helpers used to call these methods,
so that they can also be used in the new netlink code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define get_module_eeprom_by_page() ethtool callback and implement
netlink infrastructure.
get_module_eeprom_by_page() allows network drivers to dump a part of
module's EEPROM specified by page and bank numbers along with offset and
length. It is effectively a netlink replacement for get_module_info()
and get_module_eeprom() pair, which is needed due to emergence of
complex non-linear EEPROM layouts.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.
Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.
The per-net hook unregister function uses call_rcu instead.
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.
Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.
Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().
Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.
This can only happens on module removal, not during netns exit.
The new function expects the table name, not the table struct.
This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.
The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.
Fixes: aee12a0a3727e ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP is virtually never used, so no need to use space in struct net for it.
Put the pernet ipv4/v6 socket in the dccp ipv4/ipv6 modules instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20210408174502.1625-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
napi_disable() is subject to an hangup, when the threaded
mode is enabled and the napi is under heavy traffic.
If the relevant napi has been scheduled and the napi_disable()
kicks in before the next napi_threaded_wait() completes - so
that the latter quits due to the napi_disable_pending() condition,
the existing code leaves the NAPI_STATE_SCHED bit set and the
napi_disable() loop waiting for such bit will hang.
This patch addresses the issue by dropping the NAPI_STATE_DISABLE
bit test in napi_thread_wait(). The later napi_threaded_poll()
iteration will take care of clearing the NAPI_STATE_SCHED.
This also addresses a related problem reported by Jakub:
before this patch a napi_disable()/napi_enable() pair killed
the napi thread, effectively disabling the threaded mode.
On the patched kernel napi_disable() simply stops scheduling
the relevant thread.
v1 -> v2:
- let the main napi_thread_poll() loop clear the SCHED bit
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nlh is being checked for validtity two times when it is dereferenced in
this function. Check for validity again when updating the flags through
nlh pointer to make the dereferencing safe.
CC: <stable@vger.kernel.org>
Addresses-Coverity: ("NULL pointer dereference")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
- Proper support for BCM4330 and BMC4334
- Various improvements for firmware download of Intel controllers
- Update management interface revision to 20
- Support for AOSP HCI vendor commands
- Initial Virtio support
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=jiCz
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2021-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Proper support for BCM4330 and BMC4334
- Various improvements for firmware download of Intel controllers
- Update management interface revision to 20
- Support for AOSP HCI vendor commands
- Initial Virtio support
====================
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-04-08
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 2 day(s) which contain
a total of 4 files changed, 31 insertions(+), 10 deletions(-).
The main changes are:
1) Validate and reject invalid JIT branch displacements, from Piotr Krysiuk.
2) Fix incorrect unhash restore as well as fwd_alloc memory accounting in
sock map, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* S1G beacon validation
* potential leak in nl80211
* fast-RX confusion with 4-addr mode
* erroneous WARN_ON that userspace can trigger
* wrong time units in virt_wifi
* rfkill userspace API breakage
* TXQ AC confusing that led to traffic stopped forever
* connection monitoring time after/before confusion
* netlink beacon head validation buffer overrun
-----BEGIN PGP SIGNATURE-----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=rGEc
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-04-08.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes berg says:
====================
Various small fixes:
* S1G beacon validation
* potential leak in nl80211
* fast-RX confusion with 4-addr mode
* erroneous WARN_ON that userspace can trigger
* wrong time units in virt_wifi
* rfkill userspace API breakage
* TXQ AC confusing that led to traffic stopped forever
* connection monitoring time after/before confusion
* netlink beacon head validation buffer overrun
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- for kerneldoc in batadv_priv, by Linus Luessing
- drop unused header preempt.h, by Sven Eckelmann
- Fix misspelled "wont", by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=dg37
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20210408' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- for kerneldoc in batadv_priv, by Linus Luessing
- drop unused header preempt.h, by Sven Eckelmann
- Fix misspelled "wont", by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.
This requires adding additional argument through rtnl_af_ops
set_link_af callback.
Reported-by: Hongren Zheng <li@zenithal.me>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With recent changes that separated action module load from action
initialization tcf_action_init() function error handling code was modified
to manually release the loaded modules if loading/initialization of any
further action in same batch failed. For the case when all modules
successfully loaded and some of the actions were initialized before one of
them failed in init handler. In this case for all previous actions the
module will be released twice by the error handler: First time by the loop
that manually calls module_put() for all ops, and second time by the action
destroy code that puts the module after destroying the action.
Reproduction:
$ sudo tc actions add action simple sdata \"2\" index 2
$ sudo tc actions add action simple sdata \"1\" index 1 \
action simple sdata \"2\" index 2
RTNETLINK answers: File exists
We have an error talking to the kernel
$ sudo tc actions ls action simple
total acts 1
action order 0: Simple <"2">
index 2 ref 1 bind 0
$ sudo tc actions flush action simple
$ sudo tc actions ls action simple
$ sudo tc actions add action simple sdata \"2\" index 2
Error: Failed to load TC action module.
We have an error talking to the kernel
$ lsmod | grep simple
act_simple 20480 -1
Fix the issue by modifying module reference counting handling in action
initialization code:
- Get module reference in tcf_idr_create() and put it in tcf_idr_release()
instead of taking over the reference held by the caller.
- Modify users of tcf_action_init_1() to always release the module
reference which they obtain before calling init function instead of
assuming that created action takes over the reference.
- Finally, modify tcf_action_init_1() to not release the module reference
when overwriting existing action as this is no longer necessary since both
upper and lower layers obtain and manage their own module references
independently.
Fixes: d349f9976868 ("net_sched: fix RTNL deadlock again caused by request_module()")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Action init code increments reference counter when it changes an action.
This is the desired behavior for cls API which needs to obtain action
reference for every classifier that points to action. However, act API just
needs to change the action and releases the reference before returning.
This sequence breaks when the requested action doesn't exist, which causes
act API init code to create new action with specified index, but action is
still released before returning and is deleted (unless it was referenced
concurrently by cls API).
Reproduction:
$ sudo tc actions ls action gact
$ sudo tc actions change action gact drop index 1
$ sudo tc actions ls action gact
Extend tcf_action_init() to accept 'init_res' array and initialize it with
action->ops->init() result. In tcf_action_add() remove pointers to created
actions from actions array before passing it to tcf_action_put_many().
Fixes: cae422f379f3 ("net: sched: use reference counting action init")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6855e8213e06efcaf7c02a15e12b1ae64b9a7149.
Following commit in series fixes the issue without introducing regression
in error rollback of tcf_action_destroy().
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the beacon head attribute (NL80211_ATTR_BEACON_HEAD)
is too short to even contain the frame control field,
we access uninitialized data beyond the buffer. Fix this
by checking the minimal required size first. We used to
do this until S1G support was added, where the fixed
data portion has a different size.
Reported-and-tested-by: syzbot+72b99dcf4607e8c770f3@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 1d47f1198d58 ("nl80211: correctly validate S1G beacon head")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210408154518.d9b06d39b4ee.Iff908997b2a4067e8d456b3cb96cab9771d252b8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If any of the cipher schemes specified by the driver are invalid, bail
out and fail the registration rather than just warning. Otherwise, we
might later crash when we try to use the invalid cipher scheme, e.g.
if the hdr_len is (significantly) less than the pn_offs + pn_len, we'd
have an out-of-bounds access in RX validation.
Fixes: 2475b1cc0d52 ("mac80211: add generic cipher scheme support")
Link: https://lore.kernel.org/r/20210408143149.38a3a13a1b19.I6b7f5790fa0958ed8049cf02ac2a535c61e9bc96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After channel switch, we should consider any beacon with a
CSA IE as a new switch. If the CSA IE is a leftover from
before the switch that the AP forgot to remove, we'll get
a CSA-to-Self.
This caused issues in iwlwifi where the firmware saw a beacon
with a CSA-to-Self with mode = 1 on the new channel after a
switch. The firmware considered this a new switch and closed
its queues. Since the beacon didn't change between before and
after the switch, we wouldn't handle it (the CRC is the same)
and we wouldn't let the firmware open its queues again or
disconnect if the CSA IE stays for too long.
Clear the CRC valid state after we switch to make sure that
we handle the beacon and handle the CSA IE as required.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some drivers, for example mt76, use the skb priority field, and
expects that to be consistent with the skb queue mapping. On some
frame injection code paths that was not true, and it broke frame
injection. Now the skb queue mapping is set according to the skb
priority value when the frame is injected. The skb priority value
is also derived from the frame data for all frame types, as it
was done prior to commit dbd50a851c50 (only allocate one queue
when using iTXQs). Fixes frame injection with the mt76 driver on
MT7610E chipset.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/r/20210401164455.978245-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some HW/driver can support passing ethernet rx decap frames and
raw 802.11 frames for the monitor interface concurrently and
via separate RX calls to mac80211. Packets going to the monitor
interface(s) would be in 802.11 format and thus not have the
RX_FLAG_8023 set, and 802.11 format monitoring frames should have
RX_FLAG_ONLY_MONITOR set.
Drivers doing such can enable the SUPPORTS_CONC_MON_RX_DECAP to
allow using ethernet decap offload while a monitor interface is
active, currently RX decapsulation offload gets disabled when a
monitor interface is added.
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Link: https://lore.kernel.org/r/1617068116-32253-1-git-send-email-srirrama@codeaurora.org
[add proper documentation, rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rfkill now allows to report a reason for the hw_rfkill state.
Allow cfg80211 drivers to specify this reason.
Keep the current API to use the default reason
(RFKILL_HARD_BLOCK_SIGNAL).
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210322204633.102581-4-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some controllers don't support the Simple Pairing Options feature that
can indicate the support for P-192 and P-256 public key validation.
However they might support the Microsoft vendor extension that can
indicate the validiation capability as well.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The le_scan_{int,window}_adv_monitor settings have not been set with a
sensible default.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In some cases (depending on the driver, but it's true e.g. for
iwlwifi) we're using an internal TXQ for management packets,
mostly to simplify the code and to have a place to queue them.
However, it appears that in certain cases we can confuse the
code and management frames are dropped, which is certainly not
what we want.
Short-circuit the processing of management frames. To keep the
impact minimal, only put them on the frags queue and check the
tid == management only for doing that and to skip the airtime
fairness checks, if applicable.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20210319232800.0e876c800866.Id2b66eb5a17f3869b776c39b5ca713272ea09d5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The variable result is being assigned a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210328213729.65819-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
GCC reports the following warning with W=1:
net/mac80211/rc80211_minstrel_ht.c:871:34: warning:
variable 'mg' set but not used [-Wunused-but-set-variable]
871 | struct minstrel_mcs_group_data *mg;
| ^~
This variable is not used in function , this commit
remove it to fix the warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210326024843.987941-1-weiyongjun1@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20210325143854.13186-1-linqiheng@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Link: https://lore.kernel.org/r/1617711116-49370-1-git-send-email-huangguobin4@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A WARN_ON(wdev->conn) would trigger in cfg80211_sme_connect(), if multiple
send_msg(NL80211_CMD_CONNECT) system calls are made from the userland, which
should be anticipated and handled by the wireless driver. Remove this WARN_ON()
to prevent kernel panic if kernel is configured to "panic_on_warn".
Bug reported by syzbot.
Reported-by: syzbot+5f9392825de654244975@syzkaller.appspotmail.com
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210407162756.6101-1-ducheng2@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The incorrect timeout check caused probing to happen when it did
not need to happen. This in turn caused tx performance drop
for around 5 seconds in ath10k-ct driver. Possibly that tx drop
is due to a secondary issue, but fixing the probe to not happen
when traffic is running fixes the symptom.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Fixes: 9abf4e49830d ("mac80211: optimize station connection monitor")
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210330230749.14097-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Normally, TXQs have
txq->tid = tid;
txq->ac = ieee80211_ac_from_tid(tid);
However, the special management TXQ actually has
txq->tid = IEEE80211_NUM_TIDS; // 16
txq->ac = IEEE80211_AC_VO;
This makes sense, but ieee80211_ac_from_tid(16) is the same
as ieee80211_ac_from_tid(0) which is just IEEE80211_AC_BE.
Now, normally this is fine. However, if the netdev queues
were stopped, then the code in ieee80211_tx_dequeue() will
propagate the stop from the interface (vif->txqs_stopped[])
if the AC 2 (ieee80211_ac_from_tid(txq->tid)) is marked as
stopped. On wake, however, __ieee80211_wake_txqs() will wake
the TXQ if AC 0 (txq->ac) is woken up.
If a driver stops all queues with ieee80211_stop_tx_queues()
and then wakes them again with ieee80211_wake_tx_queues(),
the ieee80211_wake_txqs() tasklet will run to resync queue
and TXQ state. If all queues were woken, then what'll happen
is that _ieee80211_wake_txqs() will run in order of HW queues
0-3, typically (and certainly for iwlwifi) corresponding to
ACs 0-3, so it'll call __ieee80211_wake_txqs() for each AC in
order 0-3.
When __ieee80211_wake_txqs() is called for AC 0 (VO) that'll
wake up the management TXQ (remember its tid is 16), and the
driver's wake_tx_queue() will be called. That tries to get a
frame, which will immediately *stop* the TXQ again, because
now we check against AC 2, and AC 2 hasn't yet been marked as
woken up again in sdata->vif.txqs_stopped[] since we're only
in the __ieee80211_wake_txqs() call for AC 0.
Thus, the management TXQ will never be started again.
Fix this by checking txq->ac directly instead of calculating
the AC as ieee80211_ac_from_tid(txq->tid).
Fixes: adf8ed01e4fd ("mac80211: add an optional TXQ for other PS-buffered frames")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20210323210500.bf4d50afea4a.I136ffde910486301f8818f5442e3c9bf8670a9c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Recompiling with the new extended version of struct rfkill_event
broke systemd in *two* ways:
- It used "sizeof(struct rfkill_event)" to read the event, but
then complained if it actually got something != 8, this broke
it on new kernels (that include the updated API);
- It used sizeof(struct rfkill_event) to write a command, but
didn't implement the intended expansion protocol where the
kernel returns only how many bytes it accepted, and errored
out due to the unexpected smaller size on kernels that didn't
include the updated API.
Even though systemd has now been fixed, that fix may not be always
deployed, and other applications could potentially have similar
issues.
As such, in the interest of avoiding regressions, revert the
default API "struct rfkill_event" back to the original size.
Instead, add a new "struct rfkill_event_ext" that extends it by
the new field, and even more clearly document that applications
should be prepared for extensions in two ways:
* write might only accept fewer bytes on older kernels, and
will return how many to let userspace know which data may
have been ignored;
* read might return anything between 8 (the original size) and
whatever size the application sized its buffer at, indicating
how much event data was supported by the kernel.
Perhaps that will help avoid such issues in the future and we
won't have to come up with another version of the struct if we
ever need to extend it again.
Applications that want to take advantage of the new field will
have to be modified to use struct rfkill_event_ext instead now,
which comes with the danger of them having already been updated
to use it from 'struct rfkill_event', but I found no evidence
of that, and it's still relatively new.
Cc: stable@vger.kernel.org # 5.11
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-r4 (x86-64)
Link: https://lore.kernel.org/r/20210319232510.f1a139cfdd9c.Ic5c7c9d1d28972059e132ea653a21a427c326678@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In some race conditions, with more clients and traffic configuration,
below crash is seen when making the interface down. sta->fast_rx wasn't
cleared when STA gets removed from 4-addr AP_VLAN interface. The crash is
due to try accessing 4-addr AP_VLAN interface's net_device (fast_rx->dev)
which has been deleted already.
Resolve this by clearing sta->fast_rx pointer when STA removes
from a 4-addr VLAN.
[ 239.449529] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 239.449531] pgd = 80204000
...
[ 239.481496] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.60 #227
[ 239.481591] Hardware name: Generic DT based system
[ 239.487665] task: be05b700 ti: be08e000 task.ti: be08e000
[ 239.492360] PC is at get_rps_cpu+0x2d4/0x31c
[ 239.497823] LR is at 0xbe08fc54
...
[ 239.778574] [<80739740>] (get_rps_cpu) from [<8073cb10>] (netif_receive_skb_internal+0x8c/0xac)
[ 239.786722] [<8073cb10>] (netif_receive_skb_internal) from [<8073d578>] (napi_gro_receive+0x48/0xc4)
[ 239.795267] [<8073d578>] (napi_gro_receive) from [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames+0xbcc/0x12d4 [mac80211])
[ 239.804776] [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames [mac80211]) from [<c7b84d4c>] (ieee80211_rx_napi+0x7b8/0x8c8 [mac8
0211])
[ 239.815857] [<c7b84d4c>] (ieee80211_rx_napi [mac80211]) from [<c7f63d7c>] (ath11k_dp_process_rx+0x7bc/0x8c8 [ath11k])
[ 239.827757] [<c7f63d7c>] (ath11k_dp_process_rx [ath11k]) from [<c7f5b6c4>] (ath11k_dp_service_srng+0x2c0/0x2e0 [ath11k])
[ 239.838484] [<c7f5b6c4>] (ath11k_dp_service_srng [ath11k]) from [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll+0x20/0x84 [ath11k_ahb]
)
[ 239.849419] [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll [ath11k_ahb]) from [<8073ce1c>] (net_rx_action+0xe0/0x28c)
[ 239.860945] [<8073ce1c>] (net_rx_action) from [<80324868>] (__do_softirq+0xe4/0x228)
[ 239.871269] [<80324868>] (__do_softirq) from [<80324c48>] (irq_exit+0x98/0x108)
[ 239.879080] [<80324c48>] (irq_exit) from [<8035c59c>] (__handle_domain_irq+0x90/0xb4)
[ 239.886114] [<8035c59c>] (__handle_domain_irq) from [<8030137c>] (gic_handle_irq+0x50/0x94)
[ 239.894100] [<8030137c>] (gic_handle_irq) from [<803024c0>] (__irq_svc+0x40/0x74)
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Link: https://lore.kernel.org/r/1616163532-3881-1-git-send-email-seevalam@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2021-04-07
An update from ieee802154 for your *net* tree.
Most of these are coming from the flood of syzkaller reports
lately got for the ieee802154 subsystem. There are likely to
come more for this, but this is a good batch to get out for now.
Alexander Aring created a patchset to avoid llsec handling on a
monitor interface, which we do not support.
Alex Shi removed a unused macro.
Pavel Skripkin fixed another protection fault found by syzkaller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lanes field is missing for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT
link mode and it causes a failure when trying to set
'speed 10000 lanes 1' on Spectrum-2 machines when autoneg is set to on.
Add the lanes parameter for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT
link mode.
Fixes: c8907043c6ac9 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some drivers clear the 'ethtool_link_ksettings' struct in their
get_link_ksettings() callback, before populating it with actual values.
Such drivers will set the new 'link_mode' field to zero, resulting in
user space receiving wrong link mode information given that zero is a
valid value for the field.
Another problem is that some drivers (notably tun) can report random
values in the 'link_mode' field. This can result in a general protection
fault when the field is used as an index to the 'link_mode_params' array
[1].
This happens because such drivers implement their set_link_ksettings()
callback by simply overwriting their private copy of
'ethtool_link_ksettings' struct with the one they get from the stack,
which is not always properly initialized.
Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings'
and instead have drivers call ethtool_params_from_link_mode() with the
current link mode. The function will derive the link parameters (e.g.,
speed) from the link mode and fill them in the 'ethtool_link_ksettings'
struct.
v3:
* Remove link_mode parameter and derive the link parameters in
the driver instead of passing link_mode parameter to ethtool
and derive it there.
v2:
* Introduce 'cap_link_mode_supported' instead of adding a
validity field to 'ethtool_link_ksettings' struct.
[1]
general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN
KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967]
CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446
Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03
+38 d0 7c 08 84 d2 0f 85 b9
RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000
RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960
RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f
R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000
R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210
FS: 0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37
ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586
ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656
ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620
dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842
dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440
sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
sock_ioctl+0x477/0x6a0 net/socket.c:1177
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: c8907043c6ac9 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is only one place where we want to specify new_ifindex. In all
other cases, callers pass 0 as new_ifindex. It looks reasonable to add a
low-level function with new_ifindex and to convert
dev_change_net_namespace to a static inline wrapper.
Fixes: eeb85a14ee34 ("net: Allow to specify ifindex when device is moved to another namespace")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this case, we don't need to check that new_ifindex is positive in
validate_linkmsg.
Fixes: eeb85a14ee34 ("net: Allow to specify ifindex when device is moved to another namespace")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
