IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add counters per opened file for the char device in order to keep track how
many completion record faults occurred and how many of those faults failed
the writeback by the driver after attempt to fault in the page. The
counters are managed by xarray that associates the PASID with
struct idxd_user_context.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-13-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add event log processing for faulting of user batch descriptor completion
record.
When encountering an event log entry for a page fault on a completion
record, the driver is expected to do the following:
1. If the "first error in batch" bit in event log entry error info is
set, discard any previously recorded errors associated with the
"batch identifier".
2. Fix the page fault according to the fault address in the event log. If
successful, write the completion record to the fault address in user space.
3. If an error is encountered while writing the completion record and it is
associated to a descriptor in the batch, the driver associates the error
with the batch identifier of the event log entry and tracks it until the
event log entry for the corresponding batch desc is encountered.
While processing an event log entry for a batch descriptor with error
indicating that one or more descs in the batch had event log entries,
the driver will do the following before writing the batch completion
record:
1. If the status field of the completion record is 0x1, the driver will
change it to error code 0x5 (one or more operations in batch completed
with status not successful) and changes the result field to 1.
2. If the status is error code 0x6 (page fault on batch descriptor list
address), change the result field to 1.
3. If status is any other value, the completion record is not changed.
4. Clear the recorded error in preparation for next batch with same batch
identifier.
The result field is for user software to determine whether to set the
"Batch Error" flag bit in the descriptor for continuation of partial
batch descriptor completion. See DSA spec 2.0 for additional information.
If no error has been recorded for the batch, the batch completion record is
written to user space as is.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-12-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DSA supports page fault handling through PRS. However, the DMA engine
that's processing the descriptor is blocked until the PRS response is
received. Other workqueues sharing the engine are also blocked.
Page fault handing by the driver with PRS disabled can be used to
mitigate the stalling.
With PRS disabled while ATS remain enabled, DSA handles page faults on
a completion record by reporting an event in the event log. In this
instance, the descriptor is completed and the event log contains the
completion record address and the contents of the completion record. Add
support to the event log handling code to fault in the completion record
and copy the content of the completion record to user memory.
A bitmap is introduced to keep track of discarded event log entries. When
the user process initiates ->release() of the char device, it no longer is
interested in any remaining event log entries tied to the relevant wq and
PASID. The driver will mark the event log entry index in the bitmap. Upon
encountering the entries during processing, the event log handler will just
clear the bitmap bit and skip the entry rather than attempt to process the
event log entry.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-10-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Define idxd_copy_cr() to copy completion record to fault address in
user address that is found by work queue (wq) and PASID.
It will be used to write the user's completion record that the hardware
device is not able to write due to user completion record page fault.
An xarray is added to associate the PASID and mm with the
struct idxd_user_context so mm can be found by PASID and wq.
It is called when handling the completion record fault in a kernel thread
context. Switch to the mm using kthread_use_vm() and copy the
completion record to the mm via copy_to_user(). Once the copy is
completed, switch back to the current mm using kthread_unuse_mm().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-9-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a kmem cache per device for allocating event log fault context. The
context allows an event log entry to be copied and passed to a software
workqueue to be processed. Due to each device can have different sized
event log entry depending on device type, it's not possible to have a
global kmem cache.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-8-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a workqueue for user submitted completion record fault processing.
The workqueue creation and destruction lifetime will be tied to the user
sub-driver since it will only be used when the wq is a user type.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-7-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add debugfs entry to dump the content of the event log for debugging. The
function will dump all non-zero entries in the event log. It will note
which entries are processed and which entries are still pending processing
at the time of the dump. The entries may not always be in chronological
order due to the log is a circular buffer.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-6-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
An event log interrupt is raised in the misc interrupt INTCAUSE register
when an event is written by the hardware. Add basic event log processing
support to the interrupt handler. The event log is a ring where the
hardware owns the tail and the software owns the head. The hardware will
advance the tail index when an additional event has been pushed to memory.
The software will process the log entry and then advances the head. The
log is full when (tail + 1) % log_size = head. The hardware will stop
writing when the log is full. The user is expected to create a log size
large enough to handle all the expected events.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-5-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add setup of event log feature for supported device. Event log addresses
error reporting that was lacking in gen 1 DSA devices where a second error
event does not get reported when a first event is pending software
handling. The event log allows a circular buffer that the device can push
error events to. It is up to the user to create a large enough event log
ring in order to capture the expected events. The evl size can be set in
the device sysfs attribute. By default 64 entries are supported as minimal
when event log is enabled.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-4-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for changing of the event log size. Event log is a
feature added to DSA 2.0 hardware to improve error reporting.
It supersedes the SWERROR register on DSA 1.0 hardware and hope
to prevent loss of reported errors.
The error log size determines how many error entries supported for
the device. It can be configured by the user via sysfs attribute.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Current code continuously processes the interrupt as long as the hardware
is setting the status bit. There's no reason to do that since the threaded
handler will get called again if another interrupt is asserted.
Also through testing, it has shown that if a misprogrammed (or malicious)
agent can continuously submit descriptors with bad completion record and
causes errors to be reported via the misc interrupt. Continuous processing
by the thread can cause software hang watchdog to kick off since the thread
isn't giving up the CPU.
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Align the declaration of ret in atmel_xdmac_resume() with the rest of
variables. Do this by adding ret to the line with declaration for i
variable.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-8-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Do not global enable all the cyclic channels in at_xdmac_resume(). Instead
save the global status in at_xdmac_suspend() and re-enable the cyclic
channel only if it was active before suspend.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In case the system suspends to a deep sleep state where power to DMA
controller is cut-off we need to restore the content of GRWS register.
This is a write only register and writing bit X tells the controller
to suspend read and write requests for channel X. Thus set GRWS before
restoring the content of GE (Global Enable) regiter.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-5-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In case there are DMA channels not paused by consumers in suspend
process (valid on AT91 SoCs for serial driver when no_console_suspend) the
driver pauses them (using at_xdmac_device_pause() which is also the same
function called by dmaengine_pause()) and then in the resume process the
driver resumes them calling at_xdmac_device_resume() which is the same
function called by dmaengine_resume()). This is good for DMA channels
not paused by consumers but for drivers that calls
dmaengine_pause()/dmaegine_resume() on suspend/resume path this may lead to
DMA channel being enabled before the IP is enabled. For IPs that needs
strict ordering with regards to DMA channel enablement this will lead to
wrong behavior. To fix this add a new set of functions
at_xdmac_device_pause_internal()/at_xdmac_device_resume_internal() to be
called only on suspend/resume.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-4-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In case there are channels not paused during suspend (which on AT91 case
is valid for serial driver when no_console_suspend boot argument is used)
the at_xdmac_runtime_suspend_descriptors() was called more than
one time due to at_xdmac_off(). To fix this add a new argument to
at_xdmac_off() to specify if runtime PM reference counter needs to be
decremented for queued active descriptors. Along with it moved the
at_xdmac_runtime_suspend_descriptors() call under at_xdmac_chan_is_paused()
check on suspend path as for the rest of channels the suspend is delayed
by atmel_xdmac_prepare() in case channel is enabled. Same approach has
been applied on resume path.
Fixes: 650b0e990cbd ("dmaengine: at_xdmac: add runtime pm support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-3-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Runtime PM APIs for at_xdmac just plays with clk_enable()/clk_disable()
letting aside the clk_prepare()/clk_unprepare() that needs to be
executed as the clock is also prepared on probe. Thus instead of using
runtime PM force suspend/resume APIs use
clk_disable_unprepare() + pm_runtime_put_noidle() on suspend and
clk_prepare_enable() + pm_runtime_get_noresume() on resume. This
approach as been chosen instead of using runtime PM force suspend/resume
with clk_unprepare()/clk_prepare() as it looks simpler and the final
code is better.
While at it added the missing pm_runtime_mark_last_busy() on suspend before
decrementing the reference counter.
Fixes: 650b0e990cbd ("dmaengine: at_xdmac: add runtime pm support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-2-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The bit DMAC_CHEN[0] is automatically cleared by hardware to disable the
channel after the last AMBA transfer of the DMA transfer to the
destination has completed. Software can therefore poll this bit to
determine when this channel is free for a new DMA transfer.
This time requires at least 40 milliseconds on JH7110 SoC, otherwise an
error message 'failed to stop' will be reported.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Link: https://lore.kernel.org/r/20230322094820.24738-4-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add DMA reset operation in device probe and use different configuration
on CH_CFG registers according to match data. Update all uses of
of_device_is_compatible with of_device_get_match_data.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230322094820.24738-3-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The issue_pending request is ignored while driver is processing a DMA
request. Fix to issue the pending requests on any dma channel status.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-2-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
qcom_hidma uses of_dma_configure() which is declared in of_device.h.
platform_device.h and of_device.h get implicitly included by of_platform.h,
but that is going to be removed soon.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20230410232654.1561462-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In terminate_all we should queue up all submitted descriptors to be
freed. We do that for the content of the 'issued' and 'submitted' lists,
but the 'current_tx' descriptor falls through the cracks as it's
removed from the 'issued' list once it gets assigned to be the current
descriptor. Explicitly queue up freeing of the 'current_tx' descriptor
to address a memory leak that is otherwise present.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-2-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add missing setting of 'src_addr_widths', which is the same as for the
other direction.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-3-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In addition to TX channel and RX channel interrupt flags there's
another class of 'global' interrupt flags with unknown semantics. Those
weren't being handled up to now, and they are the suspected cause of
stuck IRQ states that have been sporadically occurring. Check the global
flags and clear them if raised.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace of_get_address() and of_translate_address() calls with single
call to of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230319163222.226377-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
clang with W=1 reports
drivers/dma/ti/edma.c:321:20: error: unused function
'edma_and' [-Werror,-Wunused-function]
static inline void edma_and(struct edma_cc *ecc, int offset, unsigned and)
^
This function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230320231209.1728940-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Align ZDMA DMA as well as coherent memory masks to 44 bit. This is
required when using >32 bit memory regions.
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230316093318.6722-1-harini.katakam@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
clang with W=1 reports
drivers/dma/tegra20-apb-dma.c:236:19: error: unused function
'tdma_read' [-Werror,-Wunused-function]
static inline u32 tdma_read(struct tegra_dma *tdma, u32 reg)
^
This function is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230322121001.2569909-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Per [1], UDMA TR15 transactions may hang if ICNT0 is less than 64B
Work around is to set EOL flag is to 1 for ICNT0.
Since, there is no performance penalty / side effects of setting EOL
flag event ICNTO > 64B, just set the flag for all UDMAP TR15
descriptors.
[1] https://www.ti.com/lit/er/sprz455a/sprz455a.pdf
Errata doc for J721E DRA829/TDA4VM Processors Silicon Revision 1.1/1.0
(Rev. A)
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[j-choudhary@ti.com: minor cleanups]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20230323120107.27638-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add IAA (IAX) capability mask sysfs attribute to expose to applications.
The mask provides application knowledge of what capabilities this IAA
device supports. This mask is available for IAA 2.0 device or later.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230303213732.3357494-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The K3 platforms configure the DMA resources with the
help of the TI's System Firmware's Device Manager(DM)
over TISCI. The group of DMA related Resource Manager[1]
TISCI messages includes: INTA, RINGACC, UDMAP, and PSI-L.
This configuration however, does not persist in the DM
after leaving from Suspend-to-RAM state. We have to restore
the DMA channel configuration over TISCI for all configured
channels when returning from suspend.
The TISCI resource management calls for each DMA type (UDMA,
PKTDMA, BCDMA) happen in device_free_chan_resources() and
device_alloc_chan_resources(). In pm_suspend() we store
the current udma_chan_config for channels that still have
attached clients and call device_free_chan_resources().
In pm_resume() restore the udma_channel_config from backup
and call device_alloc_chan_resources() for those channels.
Drivers like CPSW that use k3-udma-glue already do their own
DMA resource management so use the late system suspend/resume hooks.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/index.html#resource-management-rm
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[g-vlaev@ti.com: Add patch description and config backup]
[g-vlaev@ti.com: Supend only channels with clients]
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230329155349.2566010-1-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This has no use anymore, delete it all.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230322200803.869130-8-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
INVALID_IOASID and IOMMU_PASID_INVALID are duplicated. Rename
INVALID_IOASID and consolidate since we are moving away from IOASID
infrastructure.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230322200803.869130-7-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the functions unbind_store() and bind_store(), a struct bus_type *
should be a const one, as the driver core bus functions used by this
variable are expecting the pointer to be constant, and these functions
do not modify the pointer at all.
Cc: dmaengine@vger.kernel.org
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230313182918.1312597-32-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the description of @xdma_chan to @xchan to silence the warnings:
drivers/dma/xilinx/xdma.c:283: warning: Function parameter or member 'xchan' not described in 'xdma_xfer_start'
drivers/dma/xilinx/xdma.c:283: warning: Excess function parameter 'xdma_chan' description in 'xdma_xfer_start'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4051
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20230214010344.5354-1-yang.lee@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230307192655.874008-2-helgaas@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PCIe Capability is defined by the PCIe spec, so use the PCI_EXP_DEVCTL
macros defined by the PCI core instead of defining copies in IOAT. This
makes it easier to find all uses of the PCIe Device Control register. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230307214615.887354-1-helgaas@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It appears that the commit a1beaa50b583 ("dmaengine: Simplify
dmaenginem_async_device_register() function") mentions
devm_add_action_or_reset() the actual change utilised devm_add_action()
call by mistake.
Fix the issue by switching to devm_add_action_or_reset().
Fixes: a1beaa50b583 ("dmaengine: Simplify dmaenginem_async_device_register() function")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230213112138.32118-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144704.1541976-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
