Commit Graph

311 Commits

Author SHA1 Message Date
Masahiro Yamada
37477496d6 kbuild: rpm-pkg: refactor *rpm-pkg targets
Merge the similar build targets.

Also, make the output location consistent.

Previously, source packages were created in the build directory,
while binary packages under ~/rpmbuild/RPMS/.

Now, Kbuild creates the rpmbuild/ directory in the build directory,
and saves all packages under it.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:33 +09:00
Masahiro Yamada
49c803cd91 kbuild: rpm-pkg: split out the body of spec file
Most of the lines in the spec file are independent of any build
condition.

Split the body of the spec file into scripts/package/kernel.spec.
scripts/package/mkspec will prepend some env-dependent variables.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:33 +09:00
Masahiro Yamada
2a291fc315 kbuild: rpm-pkg: introduce %{with_devel} switch to select devel package
scripts/package/mkspec preprocesses the spec file by sed, but it is
unreadable. This commit removes the last portion of the sed scripting.

Remove the $S$M prefixes from the conditionally generated lines.
Instead, surround the code with %if %{with_devel} ... %endif.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:33 +09:00
Masahiro Yamada
b537925fdd kbuild: rpm-pkg: run modules_install for non-modular kernel
For the same reason as commit 4243afdb93 ("kbuild: builddeb: always
make modules_install, to install modules.builtin*"), run modules_install
even when CONFIG_MODULES=n to install modules.builtin*.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:33 +09:00
Masahiro Yamada
1789fc9125 kbuild: rpm-pkg: invoke the kernel build from rpmbuild for binrpm-pkg
To reduce the preprocess of the spec file, invoke the kernel build
from rpmbuild.

Run init/build-version to increment the release number not only for
binrpm-pkg but also for srcrpm-pkg and rpm-pkg.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:33 +09:00
Masahiro Yamada
d4f651277e kbuild: rpm-pkg: use a dummy string for _arch when undefined
If this affects only %{buildroot}, it should be enough to use a fixed
string for _arch when it is undefined.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:33 +09:00
Masahiro Yamada
d5d2d4cc60 kbuild: rpm-pkg: derive the Version from %{KERNELRELEASE}
Avoid hard-coding the Version field in the generated spec file.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
fe66b5d2ae kbuild: refactor kernel-devel RPM package and linux-headers Deb package
The kernel-devel RPM package and the linux-headers Debian package
provide headers and scripts needed for building external modules.

They copy the necessary files in slightly different ways - the RPM
copies almost everything except some exclude patterns, while the Debian
copies less number of files. There is no need to maintain different code
to do the same thing.

Split the Debian code out to scripts/package/install-extmod-build, which
is called from both of the packages.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
76a48b8ffb kbuild: add a phony target to run a command with Kbuild env vars
There are some cases where we want to run a command with the same
environment variables as Kbuild uses. For example, 'make coccicheck'
invokes scripts/coccicheck from the top Makefile so that the script can
reference to ${LINUXINCLUDE}, ${KBUILD_EXTMOD}, etc. The top Makefile
defines several phony targets that run a script.

We do it also for an internally used script, which results in a somewhat
complex call graph.

One example:

 debian/rules binary-arch
   -> make intdeb-pkg
      -> scripts/package/builddeb

It is also tedious to add a dedicated target like 'intdeb-pkg' for each
use case.

Add a generic target 'run-command' to run an arbitrary command in an
environment with all Kbuild variables set.

The usage is:

  $ make run-command KBUILD_RUN_COMMAND=<command>

The concept is similar to:

  $ dpkg-architecture -c <command>

This executes <command> in an environment which has all DEB_* variables
defined.

Convert the existing 'make intdeb-pkg'.

Another possible usage is to interrogate a Make variable.

  $ make run-command KBUILD_RUN_COMMAND='echo $(KBUILD_CFLAGS)'

might be useful to see KBUILD_CFLAGS set by the top Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
93ed5605c6 kbuild: rpm-pkg: replace $KERNELRELEASE in spec file with %{KERNELRELEASE}
Avoid hard-coding the value of KERNELRELEASE in the generated spec file.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
5d8e41b518 kbuild: rpm-pkg: replace $__KERNELRELEASE in spec file with %{version}
${version} will be replaced with the value of the Version field.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
a06d9ef897 kbuild: rpm-pkg: record ARCH option in spec file
Currently, we rely on the top Makefile defining ARCH option when we
run 'make rpm-pkg' or 'make binrpm-pkg'.

It does not apply when we run 'make srcrpm-pkg', and separately run
'rpmbuild' for the generated SRPM. This is a problem for cross-build.

Just like the Debian package, save the value of ARCH in the spec file.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
fe809b8271 kbuild: rpm-pkg: use %{makeflags} to pass common Make options
This is useful to pass more common Make options.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
192868258d kbuild: rpm-pkg: do not hard-code $MAKE in spec file
Currently, $MAKE will expand to the GNU Make program that created the
source RPM. This is problematic if you carry it to a different build
host to run 'rpmbuild' there.

Consider this command:

  $ /path/to/my/custom/make srcrpm-pkg

The spec file in the SRPM will record '/path/to/my/custom/make', which
exists only on that build environment.

To create a portable SRPM, the spec file should avoid hard-coding $MAKE.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
61eca933d0 kbuild: rpm-pkg: remove unneeded '-f $srctree/Makefile' in spec file
This is unneeded because the Makefile in the output directory wraps
the top-level Makefile in the srctree.

Just run $MAKE irrespective of the build location.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
233046a2af kbuild: rpm-pkg: define _arch conditionally
Commit 3089b2be0c ("kbuild: rpm-pkg: fix build error when _arch is
undefined") does not work as intended; _arch is always defined as
$UTS_MACHINE.

The intention was to define _arch to $UTS_MACHINE only when it is not
defined.

Fixes: 3089b2be0c ("kbuild: rpm-pkg: fix build error when _arch is undefined")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-25 00:59:32 +09:00
Masahiro Yamada
1240dabe8d kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
When CONFIG_MODULES is disabled for ARCH=um, 'make (bin)deb-pkg' fails
with an error like follows:

  cp: cannot create regular file 'debian/linux-image/usr/lib/uml/modules/6.4.0-rc2+/System.map': No such file or directory

Remove the CONFIG_MODULES check completely so ${pdir}/usr/lib/uml/modules
will always be created and modules.builtin.(modinfo) will be installed
under it for ARCH=um.

Fixes: b611daae5e ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-06-27 08:31:27 +09:00
Josh Triplett
4243afdb93 kbuild: builddeb: always make modules_install, to install modules.builtin*
Even for a non-modular kernel, the kernel builds modules.builtin and
modules.builtin.modinfo, with information about the built-in modules.
Tools such as initramfs-tools need these files to build a working
initramfs on some systems, such as those requiring firmware.

Now that `make modules_install` works even in non-modular kernels and
installs these files, unconditionally invoke it when building a Debian
package.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-06-27 08:31:26 +09:00
Linus Torvalds
d55571c008 Kbuild updates for v6.4
- Refactor scripts/kallsyms to make it faster and easier to maintain
 
  - Clean up menuconfig
 
  - Provide Clang with hard-coded target triple instead of CROSS_COMPILE
 
  - Use -z pack-relative-relocs flags instead of --use-android-relr-tags
    for arm64 CONFIG_RELR
 
  - Add srcdeb-pkg target to build only a Debian source package
 
  - Add KDEB_SOURCE_COMPRESS option to specify the compression for a
    Debian source package
 
  - Misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmRM9usVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGg+UQAKbDv/rlBLsdFOWnFgh8IUE58uUb
 UF/lmbyPQPZS1+z8WS/ec4ONigPd0gcfjI8klaZuYJ2j5xK0Nf+J8KRQlG9vLCDJ
 O0jPV77mKRMkz6UIaa5Dd8MNje8Pn+6T1qev1I9+0dBhyS2csHds3NuDuI/kDehB
 V1097moJcTEUGbNWTgnIA3LckIP51OMUgmT94gntcWcTvuGahRmn+Vvn4pijd6rn
 r3081wejYl+gZ9DGobRT7yXTsGNkHBHJcmK7VaocAL29haNt+rEULvAC1ABEUkaE
 tJMLodybbBiNH441EuUHJBA90yWUxL2EDmTz7kvvYrwem5FsFx6dpuKUXcJpCxW7
 x66qOQHrHC7ZY98heMs07TLz+5yMhAseBSGgf6QDSvX7CP20kCgf7q0IikfhByMo
 ZWrxj5Zg+P6qoqP5NuoZM4waOarz4wN96OAdB4ao3tbMb0kmzdpvI7W9ZuLaBmEP
 iTYm5r6if++a4a09V4WfWOyE0+7TYwSWwl271pIeovZy0p77ulgiYFo8/a9XqKlS
 CrUP1r85zkDHYN/RS4DcbXkqa4RnfYUBd/9h/5zAMLOWwGLRets+/xA4sD2QE9nV
 xzel3AhVrE3uX0QEPOZnFWTUb5TXkYuhrDxkqRGit61XUeP0Ohy6P1ri8f1dI74J
 2huTmg+CZkyfXEff
 =UuFY
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Refactor scripts/kallsyms to make it faster and easier to maintain

 - Clean up menuconfig

 - Provide Clang with hard-coded target triple instead of CROSS_COMPILE

 - Use -z pack-relative-relocs flags instead of --use-android-relr-tags
   for arm64 CONFIG_RELR

 - Add srcdeb-pkg target to build only a Debian source package

 - Add KDEB_SOURCE_COMPRESS option to specify the compression for a
   Debian source package

 - Misc cleanups and fixes

* tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: deb-pkg: specify targets in debian/rules as .PHONY
  sparc: unify sparc32/sparc64 archhelp
  kbuild: rpm-pkg: remove kernel-drm PROVIDES
  kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression
  kbuild: add srcdeb-pkg target
  Makefile: use -z pack-relative-relocs
  kbuild: clang: do not use CROSS_COMPILE for target triple
  kconfig: menuconfig: reorder functions to remove forward declarations
  kconfig: menuconfig: remove unused M_EVENT macro
  kconfig: menuconfig: remove OLD_NCURSES macro
  kbuild: builddeb: Eliminate debian/arch use
  scripts/kallsyms: update the usage in the comment block
  scripts/kallsyms: decrease expand_symbol() / cleanup_symbol_name() calls
  scripts/kallsyms: change the output order
  scripts/kallsyms: move compiler-generated symbol patterns to mksysmap
  scripts/kallsyms: exclude symbols generated by itself dynamically
  scripts/mksysmap: use sed with in-line comments
  scripts/mksysmap: remove comments described in nm(1)
  scripts/kallsyms: remove redundant code for omitting U and N
  kallsyms: expand symbol name into comment for debugging
2023-04-30 11:32:53 -07:00
Masahiro Yamada
9892bd72ef kbuild: deb-pkg: specify targets in debian/rules as .PHONY
If a file with the same name exists, the target is not run.

For example, the following command fails.

  $ make O=build-arch bindeb-pkg
    [ snip ]
  sed: can't read modules.order: No such file or directory
  make[6]: *** [../Makefile:1577: __modinst_pre] Error 2
  make[5]: *** [../scripts/Makefile.package:150: intdeb-pkg] Error 2
  make[4]: *** [../Makefile:1657: intdeb-pkg] Error 2
  make[3]: *** [debian/rules:14: binary-arch] Error 2
  dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
  make[2]: *** [../scripts/Makefile.package:139: bindeb-pkg] Error 2

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-26 21:10:51 +09:00
Masahiro Yamada
c90b3bbff2 kbuild: rpm-pkg: remove kernel-drm PROVIDES
This code was added more than 20 years ago. [1]

I checked the kernel spec files in Fedora and OpenSUSE, but did not
see 'kernel-drm'. I do not know if there exists a distro that uses it
in RPM dependency.

Remove this, and let's see if somebody complains about it.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=6d956df7d6b716b28c910c4f5b360c4d44d96c4d

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-25 10:08:55 +09:00
Woody Suwalski
8b824220bd kbuild: deb-pkg: Fix a spell typo in mkdebian script
Signed-off-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-04-23 21:23:10 +09:00
Bastian Germann
491b146d4c kbuild: builddeb: Eliminate debian/arch use
In the builddeb context, the DEB_HOST_ARCH environment variable is set
to the same value as debian/arch's content, so use the variable with
dpkg-architecture.

This is the last use of the debian/arch file during dpkg-buildpackage time.

Signed-off-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-04-17 11:03:56 +09:00
Masahiro Yamada
aa7d233f45 kbuild: give up untracked files for source package builds
When the source tree is dirty and contains untracked files, package
builds may fail, for example, when a broken symlink exists, a file
path contains whitespaces, etc.

Since commit 05e96e96a3 ("kbuild: use git-archive for source package
creation"), the source tarball only contains committed files because
it is created by 'git archive'. scripts/package/gen-diff-patch tries
to address the diff from HEAD, but including untracked files by the
hand-crafted script introduces more complexity. I wrote a patch [1] to
make it work in most cases, but still wonder if this is what we should
aim for.

To simplify the code, this patch just gives up untracked files. Going
forward, it is your responsibility to do 'git add' for what you want in
the source package. The script shows a warning just in case you forgot
to do so. It should be checked only when building source packages.

[1]: https://lore.kernel.org/all/CAK7LNAShbZ56gSh9PrbLnBDYKnjtTkHMoCXeGrhcxMvqXGq9=g@mail.gmail.com/2-0001-kbuild-make-package-builds-more-robust.patch

Fixes: 05e96e96a3 ("kbuild: use git-archive for source package creation")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-11 08:58:45 +09:00
Kevin Locke
3ced71d273 kbuild: deb-pkg: set version for linux-headers paths
As a result of the switch to dh_listpackages, $version is no longer set
when install_kernel_headers() is called.  This causes files in the
linux-headers deb package to be installed to a path with an empty
$version (e.g. /usr/src/linux-headers-/scripts/sign-file rather than
/usr/src/linux-headers-6.3.0-rc3/scripts/sign-file).

To avoid this, while continuing to use the version information from
dh_listpackages, pass $version from $package as the second argument
of install_kernel_headers().

Fixes: 36862e14e3 ("kbuild: deb-pkg: use dh_listpackages to know enabled packages")
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-22 10:13:16 +09:00
Masahiro Yamada
05e96e96a3 kbuild: use git-archive for source package creation
Commit 5c3d1d0abb ("kbuild: add a tool to list files ignored by git")
added a new tool, scripts/list-gitignored. My intention was to create
source packages without cleaning the source tree, without relying on git.

Linus strongly objected to it, and suggested using 'git archive' instead.
[1] [2] [3]

This commit goes in that direction - Remove scripts/list-gitignored.c
and rewrites Makefiles and scripts to use 'git archive' for building
Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg'
use 'git archive' again.

Going forward, building source packages is only possible in a git-managed
tree. Building binary packages does not require git.

[1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/
[3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/

Fixes: 5c3d1d0abb ("kbuild: add a tool to list files ignored by git")
Fixes: e0ca16749a ("kbuild: make perf-tar*-src-pkg work without relying on git")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 22:46:12 +09:00
Masahiro Yamada
81f59a26f3 kbuild: rpm-pkg: move source components to rpmbuild/SOURCES
Prepare to add more files to the source RPM.

Also, fix the build error when KCONFIG_CONFIG is set:
  error: Bad file: ./.config: No such file or directory

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16 22:45:56 +09:00
Masahiro Yamada
36862e14e3 kbuild: deb-pkg: use dh_listpackages to know enabled packages
Use dh_listpackages to get a list of all binary packages.

With this, debian/control lists which binary packages will be produced.
Previously, ARCH=um listed linux-libc-dev in debian/control, but it
was not generated because each of mkdebian and builddeb independently
maintained the if-conditionals.

Another motivation is to allow scripts/package/builddeb to get the
package name (linux-image-*, etc.) dynamically from debian/control.

This will also allow the BuildProfile to control the generation of
the binary packages.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:15:07 +09:00
Masahiro Yamada
b611daae5e kbuild: deb-pkg: split image and debug objects staging out into functions
Prepare for the refactoring in the next commit.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:15:07 +09:00
Masahiro Yamada
f50aa51c44 kbuild: deb-pkg: set CROSS_COMPILE only when undefined
Commit 3ab18a625c ("kbuild: deb-pkg: improve the usability of source
package") set needless CROSS_COMPILE.

For example, 'make allnoconfig bindeb-pkg' on a x86_64 system will set
CROSS_COMPILE=i686-linux-gnu-, where the biarch compiler 'gcc' should
work for building the i386 kernel.

  $ uname -m
  x86_64
  $ make allnoconfig bindeb-pkg >/dev/null
  dpkg-architecture: warning: specified GNU system type i686-linux-gnu does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
   dpkg-source --before-build .
   debian/rules binary
  scripts/Kconfig.include:39: C compiler 'i686-linux-gnu-gcc' not found
  make[6]: *** [scripts/kconfig/Makefile:77: olddefconfig] Error 1
  make[5]: *** [Makefile:693: olddefconfig] Error 2
  make[4]: *** [Makefile:358: __build_one_by_one] Error 2
  make[3]: *** [debian/rules:7: build-arch] Error 2
  dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
  make[2]: *** [scripts/Makefile.package:127: bindeb-pkg] Error 2
  make[1]: *** [Makefile:1657: bindeb-pkg] Error 2
  make: *** [Makefile:358: __build_one_by_one] Error 2

Check whether CROSS_COMPILE is defined, instead of whether it is non-empty.

If you invoke debian/rules via Kbuild, CROSS_COMPILE is always defined
in the top Makefile.

Fixes: 3ab18a625c ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:15:07 +09:00
Masahiro Yamada
7a531c21f8 kbuild: deb-pkg: do not take KERNELRELEASE from the source version
KERNELRELEASE does not need to match the package version in changelog.
Rather, it conventially matches what is called 'ABINAME', which is a
part of the binary package names.

Both are the same by default, but the former might be overridden by
KDEB_PKGVERSION. In this case, the resulting package would not boot
because /lib/modules/$(uname -r) does not point the module directory.

Partially revert 3ab18a625c ("kbuild: deb-pkg: improve the usability
of source package").

Reported-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Fixes: 3ab18a625c ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
2023-03-15 15:15:07 +09:00
Masahiro Yamada
2fd6c4553c kbuild: deb-pkg: make debian source package working again
Since commit c5bf2efb05 ("kbuild: deb-pkg: fix binary-arch and clean
in debian/rules"), the source package generated by 'make deb-pkg' fails
to build.

I terribly missed the fact that the intdeb-pkg target may regenerate
include/config/kernel.release due to the following in the top Makefile:

  %pkg: include/config/kernel.release FORCE

Restore KERNELRELEASE= option to avoid the kernel.release disagreement
between build-arch and binary-arch.

Fixes: c5bf2efb05 ("kbuild: deb-pkg: fix binary-arch and clean in debian/rules")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:15:07 +09:00
Masahiro Yamada
7adf14d8ac kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
This is a temporary workaround added by commit f6e09b07cc ("kbuild:
do not put .scmversion into the source tarball").

Since commit 1cb86b6c31 ("kbuild: save overridden KERNELRELEASE in
include/config/kernel.release"), the user-supplied KERNELRELEASE is
saved in include/config/kernel.release.

Remove it again.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-02-26 16:54:12 +09:00
Masahiro Yamada
3ab18a625c kbuild: deb-pkg: improve the usability of source package
Improve the source package support in case the dpkg-buildpackage is
directly used to build binary packages.

For cross-compiling, you can set CROSS_COMPILE via the environment
variable, but it is better to set it automatically - set it to
${DEB_HOST_GNU_TYPE}- if we are cross-compiling but not from the top
Makefile.

The generated source package may be carried to a different build
environment, which may have a different compiler installed.
Run olddefconfig first to set new CONFIG options to their default
values without prompting.

Take KERNELRELEASE and KBUILD_BUILD_VERSION from the version field of
debian/changelog in case it is updated afterwards.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-26 15:23:30 +09:00
Masahiro Yamada
c5bf2efb05 kbuild: deb-pkg: fix binary-arch and clean in debian/rules
The clean target needs ARCH=${ARCH} to clean up the tree for the correct
architecture. 'make (bin)deb-pkg' skips cleaning, but the preclean hook
may be executed if dpkg-buildpackage is directly used.

The binary-arch target does not need KERNELRELEASE because it is not
updated during the installation. KBUILD_BUILD_VERSION is not needed
either because binary-arch does not build vmlinux.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-26 15:23:30 +09:00
Masahiro Yamada
1fc9095846 kbuild: tar-pkg: use tar rules in scripts/Makefile.package
Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in
scripts/Makefile.package.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-26 15:23:30 +09:00
Masahiro Yamada
e785399559 kbuild: deb-pkg: switch over to source format 3.0 (quilt)
Change the source format from "1.0" to "3.0 (quilt)" because it works
more cleanly.

All files except .config and debian/ go into the orig tarball.
Add a single patch, debian/patches/config, and delete the ugly
extend-diff-ignore patterns.

The debian tarball will be compressed into *.debian.tar.xz by default.
If you like to use a different compression mode, you can pass the
command line option, DPKG_FLAGS=-Zgzip, for example.

The orig tarball only supports gzip for now. The combination of
gzip and xz is somewhat clumsy, but it is not a practical problem.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-26 15:22:37 +09:00
Masahiro Yamada
6eabebb1b6 kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
scripts/Makefile.package does not need to know the value of
KDEB_SOURCENAME because the source name can be taken from
debian/changelog by using dpkg-parsechangelog.

Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to
scripts/package/mkdebian.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-26 15:19:38 +09:00
Masahiro Yamada
6fc91752d7 kbuild: srcrpm-pkg: create source package without cleaning
If you run 'make (src)rpm-pkg', all objects are lost due to 'make clean',
which makes the incremental builds impossible.

Instead of cleaning, pass the exclude list to tar's --exclude-from
option.

Previously, the .config was contained in the source tarball.

With this commit, the source rpm consists of separate linux.tar.gz
and .config.

Remove stale comments. Now, 'make (src)rpm-pkg' works with O= option.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-26 15:18:47 +09:00
Masahiro Yamada
7bf4582d7a kbuild: deb-pkg: create source package without cleaning
If you run 'make deb-pkg', all objects are lost due to 'make clean',
which makes the incremental builds impossible.

Instead of cleaning, pass the exclude list to tar's --exclude-from
option.

Previously, *.diff.gz contained some check-in files such as
.clang-format, .cocciconfig.

With this commit, *.diff.gz will only contain the .config and debian/.
The other source files will go into the .orig tarball.

linux.tar.gz is rebuilt only when the source files that would go into
the tarball are changed.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-26 15:18:07 +09:00
Masahiro Yamada
f6e09b07cc kbuild: do not put .scmversion into the source tarball
.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE.

In fact, deb-pkg does not rely on it any more because the generated
debian/rules specifies KERNELRELEASE from the command line.

Do likwise for (src)rpm-pkg, and remove this feature.
For the same reason, you do not need to save LOCALVERSION in the
spec file.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-01-30 13:00:30 +09:00
Bastian Germann
c9f9cf2560 builddeb: clean generated package content
For each binary Debian package, a directory with the package name is
created in the debian directory. Correct the generated file matches in the
package's clean target, which were renamed without adjusting the target.

Fixes: 1694e94e4f ("builddeb: match temporary directory name to the package name")
Signed-off-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-26 12:43:33 +09:00
Sven Joachim
a5e40d8631 builddeb: Consolidate consecutive chmod calls into one
No need to call chmod three times when it can do everything at once.

Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-26 12:43:33 +09:00
Arend van Spriel
169dd78043 scripts: rpm: make clear that mkspec script contains 4.13 feature
A fix was made in the mkspec script that uses a feature, ie. the
OR expression, which requires RPM 4.13. However, the script indicates
another minimum version. Lower versions may have success by using
the --no-deps option as suggested, but feels like bumping the version
to 4.13 is reasonable as it put me on the wrong track at first with
RPM 4.11 on my Centos7 machine.

Fixes: 02a893bc99 ("kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires")
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-11 20:42:34 +09:00
Masahiro Yamada
02a893bc99 kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f95
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.

Add it as an alternative package.

BTW, if it is impossible to solve the build requirement, the final
resort would be:

    $ make RPMOPTS=--nodeps rpm-pkg

This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.

NOTE1:
  Likewise, it is possible to bypass the build dependency check for
  debian package builds:

    $ make DPKG_FLAGS=-d deb-pkg

NOTE2:
  The 'or' operator is supported since RPM 4.13. So, old distros such
  as CentOS 7 will break. I suggest installing newer rpmbuild in such
  cases.

Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes: 8818039f95 ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
2022-12-30 17:24:49 +09:00
Veronika Kabatova
731c4eac84 buildtar: fix tarballs with EFI_ZBOOT enabled
When CONFIG_EFI_ZBOOT is enabled, the binary name is not Image.gz
anymore but vmlinuz.efi. No vmlinuz gets put into the tarball as the
buildtar script doesn't recognize this name. Remedy this by adding the
binary name to the list of acceptable files to package.

Reported-by: CKI Project <cki-project@redhat.com>
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-12-17 21:55:04 +09:00
Ivan Vecera
8818039f95 kbuild: add ability to make source rpm buildable using koji
Changes:
- added new target 'srcrpm-pkg' to generate source rpm
- added required build tools to spec file
- removed locally compiled host tools to force their re-compile

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Íñigo Huguet <ihuguet@redhat.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-24 00:23:44 +09:00
Masahiro Yamada
5724ac5589 kbuild: deb-pkg: get rid of |flex:native workaround from Build-Depends
"| flex:native" was a workaround (suggested by Ben, see Link) because
"MultiArch: foreign" was missing in the flex package on some old distros
when commit e3a2285066 ("deb-pkg: generate correct build dependencies")
was applied.

It seems fixing the flex package has been completed. Get rid of the
workaround.

Link: https://lore.kernel.org/linux-kbuild/ab49b0582ef12b14b1a68877263b81813e2492a2.camel@decadent.org.uk/
Link: https://wiki.debian.org/CrossBuildPackagingGuidelines
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
2022-11-21 10:18:39 +09:00
Marc Zyngier
5db8face97 kbuild: Restore .version auto-increment behaviour for Debian packages
Since 2df8220cc5 ("kbuild: build init/built-in.a just once"),
generating Debian packages using 'make bindeb-pkg' results in
packages that are stuck to the same .version, leading to unexpected
behaviours (multiple packages with the same version).

That's because the mkdebian script samples the build version
before building the kernel, and forces the use of that version
number for the actual build.

Restore the previous behaviour by calling init/build-version
instead of reading the .version file. This is likely to result
in too many .version bumps, but this is what was happening before
(although the bump was affecting builds made after the current one).

Fixes: 2df8220cc5 ("kbuild: build init/built-in.a just once")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-17 17:51:45 +09:00
Zack Rusin
fc8c2d8ff2 kbuild: Stop including vmlinux.bz2 in the rpm's
vmlinux.bz2 was added to the rpm packages in 2009 in the
fc370ecfdb ("kbuild: add vmlinux to kernel rpm") but seemingly hasn't
been used since.

Originally this should have been split up in a seperate debugging
package because it massively increases the size of the generated rpm's
e.g. kernel rpm built using binrpm-pkg on Fedora 36 default 5.19.8 kernel
config and localmodconfig is ~255MB with vmlinux.bz2 and only ~65MB
without it.

Make the kernel built rpms about 4x smaller by not including the unused
vmlinux.bz2 in them.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-10-13 02:10:05 +09:00