IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Instead of returning resource index number just to assign it to a
field inside 'dep' which was passed as argument, we can assing
dep->resource_index from inside dwc3_gadget_ep_get_transfer_index()
itself.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In case we have many started requests and one of them in the middle is
completed with Missed Isoc, let's not End Transfer as that would
result in us loosing (possibly) many more intervals.
Instead, let's allow the controller to go through its list of started
requests.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
XferNotReady and XferInProgress give us the uFrame number we're
currently in. Printing that out on tracepoints may help us find bugs
in transfer scheduling.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Avoid a prototype when the function can be defined earlier. No
functional changes, cleanup only.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Instead of having a prototype for a function that's defined a few
lines down, let's just move definition to the place where prototype
was.
No functional changes, cleanup only.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In a few places, the argument is completely unnecessary. On places
where it's needed, we can get it from dep->dwc.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Those two arguments refer to a single bitfield in the register. In
order to simplify the code, we can combine them into a single argument
and expect caller to pass the correct action argument at all times.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
We will only have event status of IOC when IOC bit is set in
TRB. There's no need to check both bits.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
We know that only OUT endpoints can trigger SHORT. We also know that
count MUST be > 0 whenever SHORT triggers.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This will make it easier to figure out the reason for the event. That
information really helps debugging certain problems.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
We are trying to kick transfers on Isochronous endpoints in a more
controlled manner now. And this ended up rendering this piece of code
unnecessary.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
instead of having one big loop, let's split it down into two smaller
handlers: one for linear buffers and one for scatterlist.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
After all the previous changes, it's now a lot clearer how isoc
transfers should be managed. We don't need to try to End Transfers
from ep_queue since that's already done by cleanup_requests.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Now, this part of the code is duplicated and brings no extra value to
the driver. Let's remove it.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In case we get an event with status set to Missed Isoc, this means we
have missed an isochronous interval and should issue End Transfer
command and wait for the following XferNotReady.
Let's do that early, rather than late.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
By now, it has the same semantics as DWC3_EP_TRANSFER_STARTED, but
that has a much more descriptive name.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
We will need an up-to-date frame_number from XferInProgress too when
future patches improve our handling of Isoc endpoints.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The core requires the extra two bits of information for properly
scheduling Isochronous transfers. This means that we can't rely on
__dwc3_gadget_get_frame(). Let's always cache uFrame number from
XferNotReady instead.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Endpoint handlers need to know about endpoints, not dwc. If they
really need access to dwc (e.g. for printing error messages) we have a
reference to it tucked inside the endpoint.
This patch has no functional changes, it's simply moving things around.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
We *KNOW* which events we enable for which endpoint types and
we *KNOW* when they'll trigger. The endpoint type checks are
pointless.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This patch simply renames two functions to more descriptive names so
that it's easier to understand what they're doing.
Cleanup only, no functional changes.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Instead of constantly calling kick transfer everything some event
shows up, let's just rely on the fact that we send Update Transfer
every time a new request is queued.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Now that we're making sure we don't have XferComplete events, we can
rename this function to what it actually handles:
dwc3_gadget_endpoint_transfer_in_progress()
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
XferComplete is enabled only for the default control pipe, let's make
that clear in the code.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
We don't use XferNotReady for anything other than Default Control
Pipe, which is handled in ep0.c, and Isochronous endpoints. Let's make
that clear in the code.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Interrupt endpoints behave much like Bulk endpoints with the exception
that they are periodic. We can pre-issue Start Transfer exactly as we
do for Bulk endpoints.
While at that, remove one trailing blank line which is unnecessary.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The present code correctly fetches the req which were previously not
queued from the started_list but fails to continue queuing from the sg
where it previously stopped queuing (because of the unavailable TRB's).
This patch correct's the code to continue queuing from the correct sg
present in the sglist.
For example, consider 5 sgs in req. Because of limited TRB's among the
5 sgs only 3 got queued. This patch corrects the code to start queuing
from correct sg i.e 4th sg when the TRBs are available.
Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The code logic in dwc3_prepare_one_trb() incorrectly uses the address
and length fields present in req packet for mapping TRB's instead of
using the address and length fields of scattergather lists. This patch
correct's the code to use sg->address and sg->length when scattergather
lists are present.
Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Pull parisc fixlets from Helge Deller:
"Three small section mismatch fixes, one of them was found by 0-day
test infrastructure"
* 'parisc-4.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Move ccio_cujo20_fixup() into init section
parisc: Move setup_profiling_timer() out of init section
parisc: Move find_pa_parent_type() out of init section
-----BEGIN PGP SIGNATURE-----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=bhlK
-----END PGP SIGNATURE-----
Merge tag 'for-4.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We've accumulated some fixes during the last week, some of them were
in the works for a longer time but there are some newer ones too.
Most of the fixes have a reproducer and fix user visible problems,
also candidates for stable kernels. They IMHO qualify for a late rc,
though I did not expect that many"
* tag 'for-4.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix crash when trying to resume balance without the resume flag
btrfs: Fix delalloc inodes invalidation during transaction abort
btrfs: Split btrfs_del_delalloc_inode into 2 functions
btrfs: fix reading stale metadata blocks after degraded raid1 mounts
btrfs: property: Set incompat flag if lzo/zstd compression is set
Btrfs: fix duplicate extents after fsync of file with prealloc extents
Btrfs: fix xattr loss after power failure
Btrfs: send, fix invalid access to commit roots due to concurrent snapshotting
Pull ARM fixes from Russell King:
- Łukasz Stelmach spotted a couple of issues with the decompressor.
- a couple of kdump fixes found while testing kdump
- replace some perl with shell code
- resolve SIGFPE breakage
- kprobes fixes
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix kill( ,SIGFPE) breakage
ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions
ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr
ARM: 8770/1: kprobes: Prohibit probing on optimized_callback
ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed
ARM: replace unnecessary perl with sed and the shell $(( )) operator
ARM: kexec: record parent context registers for non-crash CPUs
ARM: kexec: fix kdump register saving on panic()
ARM: 8758/1: decompressor: restore r1 and r2 just before jumping to the kernel
ARM: 8753/1: decompressor: add a missing parameter to the addruart macro
Pull x86 fixes from Thomas Gleixner:
"An unfortunately larger set of fixes, but a large portion is
selftests:
- Fix the missing clusterid initializaiton for x2apic cluster
management which caused boot failures due to IPIs being sent to the
wrong cluster
- Drop TX_COMPAT when a 64bit executable is exec()'ed from a compat
task
- Wrap access to __supported_pte_mask in __startup_64() where clang
compile fails due to a non PC relative access being generated.
- Two fixes for 5 level paging fallout in the decompressor:
- Handle GOT correctly for paging_prepare() and
cleanup_trampoline()
- Fix the page table handling in cleanup_trampoline() to avoid
page table corruption.
- Stop special casing protection key 0 as this is inconsistent with
the manpage and also inconsistent with the allocation map handling.
- Override the protection key wen moving away from PROT_EXEC to
prevent inaccessible memory.
- Fix and update the protection key selftests to address breakage and
to cover the above issue
- Add a MOV SS self test"
[ Part of the x86 fixes were in the earlier core pull due to dependencies ]
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mm: Drop TS_COMPAT on 64-bit exec() syscall
x86/apic/x2apic: Initialize cluster ID properly
x86/boot/compressed/64: Fix moving page table out of trampoline memory
x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline()
x86/pkeys: Do not special case protection key 0
x86/pkeys/selftests: Add a test for pkey 0
x86/pkeys/selftests: Save off 'prot' for allocations
x86/pkeys/selftests: Fix pointer math
x86/pkeys: Override pkey when moving away from PROT_EXEC
x86/pkeys/selftests: Fix pkey exhaustion test off-by-one
x86/pkeys/selftests: Add PROT_EXEC test
x86/pkeys/selftests: Factor out "instruction page"
x86/pkeys/selftests: Allow faults on unknown keys
x86/pkeys/selftests: Avoid printf-in-signal deadlocks
x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal
x86/pkeys/selftests: Stop using assert()
x86/pkeys/selftests: Give better unexpected fault error messages
x86/selftests: Add mov_to_ss test
x86/mpx/selftests: Adjust the self-test to fresh distros that export the MPX ABI
x86/pkeys/selftests: Adjust the self-test to fresh distros that export the pkeys ABI
...
Pull UP timer fix from Thomas Gleixner:
"Work around the for_each_cpu() oddity on UP kernels in the tick
broadcast code which causes boot failures because the CPU0 bit is
always reported as set independent of the cpumask content"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Use for_each_cpu() specially on UP kernels
