IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As reported in here [0], C++ compilers don't support
__builtin_types_compatible_p(), so at least don't screw up compilation
for them and let C++ users pick btf_dump__new vs
btf_dump__new_deprecated explicitly.
[0] https://github.com/libbpf/libbpf/issues/283#issuecomment-986100727
Fixes: 6084f5dc928f ("libbpf: Ensure btf_dump__new() and btf_dump_opts are future-proof")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211223131736.483956-1-jolsa@kernel.org
Change the case that sends packets with "too short inner packet" to
include part of ethernet header, to make the trap to be triggered due to
the correct reason.
According to ASIC arch, the trap is triggered if overlay packet length is
less than 18B, and the minimum inner packet should include source MAC and
destination MAC.
Till now the case passed because one of the reserved bits in VxLAN
header was used. This issue was found while adding an equivalent test
for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test configures VxLAN with IPv6 underlay and verifies that the
expected traps are triggered under the right conditions.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-2 and above, which support up to four
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-1 switches, which support up to five
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to verify FDB vetos of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan_fdb_veto.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to verify configuration of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Add separated test cases for learning which is not supported for IPv6
and for UDP checksum flags which are different from IPv4 flags.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Rename some functions to include "ipv4", so the next patch will add
equivalent functions for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to check Q-in-VNI traffic with IPv6 underlay and overlay.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a similar fashion to the asymmetric test, add a test for symmetric
routing. In symmetric routing both the ingress and egress VTEPs perform
routing in the overlay network into / from the VxLAN tunnel. Packets in
different directions use the same VNI - the L3 VNI.
Different tenants (VRFs) use different L3 VNIs.
Add a test which is similar to the existing IPv4 test to check IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In asymmetric routing the ingress VTEP routes the packet into the
correct VxLAN tunnel, whereas the egress VTEP only bridges the packet to
the correct host. Therefore, packets in different directions use
different VNIs - the target VNI.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test uses a simple topology with two VTEPs and two VNIs and verifies
that ping passes between hosts (local / remote) in the same VLAN (VNI)
and in different VLANs belonging to the same tenant (VRF).
While the test does not check VM mobility, it does configure an anycast
gateway using a macvlan device on both VTEPs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove `vxlan_ping_test()` which is not used and probably was copied
mistakenly from vxlan_bridge_1d.sh.
This was found while adding an equivalent test for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tests are very similar to their VLAN-unaware counterpart
(vxlan_bridge_1d_ipv6.sh and vxlan_bridge_1d_port_8472_ipv6.sh),
but instead of using multiple VLAN-unaware bridges, a single VLAN-aware
bridge is used with multiple VLANs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests similar to vxlan_bridge_1d.sh and vxlan_bridge_1d_port_8472.sh.
The tests set up a topology with three VxLAN endpoints: one
"local", possibly offloaded, and two "remote", formed using veth pairs
and likely purely software bridges. The "local" endpoint is connected to
host systems by a VLAN-unaware bridge.
Since VxLAN tunnels must be unique per namespace, each of the "remote"
endpoints is in its own namespace. H3 forms the bridge between the three
domains.
Send IPv4 packets and IPv6 packets with IPv6 underlay.
Use `TC_FLAG`, which is defined in `forwarding.config` file, for TC
checks. `TC_FLAG` allows testing that on HW datapath, the traffic
actually goes through HW.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently `ping_do()` and `ping6_do()` send 10 packets.
There are cases that it is not possible to catch only the interesting
packets using tc rule, so then, it is possible to send many packets and
verify that at least this amount of packets hit the rule.
Add `PING_COUNT` variable, which is set to 10 by default, to allow tests
sending more than 10 packets using the existing ping API.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If destination port is above 32k and source port below 16k
assume this might cause 'port shadowing' where a 'new' inbound
connection matches an existing one, e.g.
inbound X:41234 -> Y:53 matches existing conntrack entry
Z:53 -> X:4123, where Z got natted to X.
In this case, new packet is natted to Z:53 which is likely
unwanted.
We avoid the rewrite for connections that originate from local host:
port-shadowing is only possible with forwarded connections.
Also adjust test case.
v3: no need to call tuple_force_port_remap if already in random mode (Phil)
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new macros for mem_hops field which can be used to represent
remote-node, socket and board level details.
Currently the code had macro for HOPS_0 which, corresponds to data
coming from another core but same node. Add new macros for HOPS_1 to
HOPS_3 to represent remote-node, socket and board level data.
Also add corresponding strings in the mem_hops array to represent
mem_hop field data in perf_mem__lvl_scnprintf function
Incase mem_hops field is used, PERF_MEM_LVLNUM field also need to be set
inorder to represent the data source. Hence printing data source via
PERF_MEM_LVL field can be skip in that scenario.
For ex: Encodings for mem_hops fields with L2 cache:
L2 - local L2
L2 | REMOTE | HOPS_0 - remote core, same node L2
L2 | REMOTE | HOPS_1 - remote node, same socket L2
L2 | REMOTE | HOPS_2 - remote socket, same board L2
L2 | REMOTE | HOPS_3 - remote board L2
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20211206091749.87585-3-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The output of bpftool prog tracelog is currently buffered, which is
inconvenient when piping the output into other commands. A simple
tracelog | grep will typically not display anything. This patch fixes it
by enabling line buffering on stdout for the whole bpftool binary.
Fixes: 30da46b5dc3a ("tools: bpftool: add a command to dump the trace pipe")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211220214528.GA11706@Mem
When unwinding using frame pointers on ARM64, the return address of the
current function may not have been pushed into the stack when a function
was interrupted, which makes perf show an incorrect call graph to the
user.
Consider the following example program:
void leaf() {
/* long computation */
}
void parent() {
// (1)
leaf();
// (2)
}
... could be compiled into (using gcc -fno-inline -fno-omit-frame-pointer):
leaf:
/* long computation */
nop
ret
parent:
// (1)
stp x29, x30, [sp, -16]!
mov x29, sp
bl parent
nop
ldp x29, x30, [sp], 16
// (2)
ret
If the program is interrupted at (1), (2), or any point in "leaf:", the
call graph will skip the callers of the current function. We can unwind
using the dwarf info and check if the return addr is the same as the LR
register, and inject the missing frame into the call graph.
Before this patch, the above example shows the following call-graph when
recording using "--call-graph fp" mode in ARM64:
# Children Self Command Shared Object Symbol
# ........ ........ ........ ................ ......................
#
99.86% 99.86% program3 program3 [.] leaf
|
---_start
__libc_start_main
main
leaf
As can be seen, the "parent" function is missing. This is specially
problematic in "leaf" because for leaf functions the compiler may always
omit pushing the return addr into the stack. After this patch, it shows
the correct graph:
# Children Self Command Shared Object Symbol
# ........ ........ ........ ................ ......................
#
99.86% 99.86% program3 program3 [.] leaf
|
---_start
__libc_start_main
main
parent
leaf
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-7-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
[ Rename machine__normalize_is() to machine__normalized_is(), as suggested by James Clark ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor the SAMPL_REG macro so that it can be used in a followup commit
to obtain the masks for ARM64 registers.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-6-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable dwarf_callchain_users on arm64 which will be needed to do a
DWARF unwind in order to get the caller of the leaf frame.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-5-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactoring script__setup_sample_type() by using callchain_param_setup()
to replace the duplicate code for callchain parameter setting up.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-4-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a mechanism for platforms to inject stack frames for the leaf
frame caller if there is enough information to determine a frame
is missing from dwarf or other post processing mechanisms.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-3-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ARM64, automatically record the link register if the frame pointer
mode is on. It will be used to do a dwarf unwind to find the caller of
the leaf frame if the frame pointer was omitted.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-2-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is in preparation for adding more tests that will need the test
number to be 3 digts so they align nicely in the output.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20211215160403.69264-3-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* Fix for kvm_run->if_flag on SEV-ES
* Fix for page table use-after-free if yielding during exit_mm()
* Improve behavior when userspace starts a nested guest with invalid state
* Fix missed wakeup with assigned devices but no VT-d posted interrupts
* Do not tell userspace to save/restore an unsupported PMU MSR
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHCGbIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNMSwf+PpOl69xqQCHzLpDtA9MTBZZi5uKc
eZqMtQ7D+T7XYbtMiHBI9zofcbtHlQVC9Na74j8J7bCuvqe8UGS/z93RoZZQ+/dg
seEbQNEgcNlPD1G3JzaipcGhRqQl6j5G9LjuixyFpkS2O27YsRTpb1HJag31uSFV
Xd7Ih0R2YnKCNJqJov324KHpDM3c4FZL8HdCS/gG94qyLHPA2dJ8fOTwCcAK4LP6
tl9XW5InXMVcck9ssDKFpAfipMNNPNPeAHMONbIm6hyG5HkVjcS3JT1bZmkauxky
VIegPlAmorRCig5Hj2QfWEIOfvTUPdmm7WWh+SSZamY6cyvolWs1hV86Bg==
=333O
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Fix for compilation of selftests on non-x86 architectures
- Fix for kvm_run->if_flag on SEV-ES
- Fix for page table use-after-free if yielding during exit_mm()
- Improve behavior when userspace starts a nested guest with invalid
state
- Fix missed wakeup with assigned devices but no VT-d posted interrupts
- Do not tell userspace to save/restore an unsupported PMU MSR
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU
KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state
KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state
KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required
KVM: VMX: Always clear vmx->fail on emulation_required
selftests: KVM: Fix non-x86 compiling
KVM: x86: Always set kvm_run->if_flag
KVM: x86/mmu: Don't advance iterator after restart due to yielding
KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
Migration of vmtest to libbpf/ci will change the address
of INDEX in vmtest.sh, which will cause vmtest.sh to not
work due to the failure of rootfs fetching.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Link: https://lore.kernel.org/bpf/20211220050803.2670677-1-pulehui@huawei.com
Add a selftest to attempt to enter L2 with invalid guests state by
exiting to userspace via I/O from L2, and then using KVM_SET_SREGS to set
invalid guest state (marking TR unusable is arbitrary chosen for its
relative simplicity).
This is a regression test for a bug introduced by commit c8607e4a086f
("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if
!from_vmentry"), which incorrectly set vmx->fail=true when L2 had invalid
guest state and ultimately triggered a WARN due to nested_vmx_vmexit()
seeing vmx->fail==true while attempting to synthesize a nested VM-Exit.
The is also a functional test to verify that KVM sythesizes TRIPLE_FAULT
for L2, which is somewhat arbitrary behavior, instead of emulating L2.
KVM should never emulate L2 due to invalid guest state, as it's
architecturally impossible for L1 to run an L2 guest with invalid state
as nested VM-Enter should always fail, i.e. L1 needs to do the emulation.
Stuffing state via KVM ioctl() is a non-architctural, out-of-band case,
hence the TRIPLE_FAULT being rather arbitrary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-5-seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attempting to compile on a non-x86 architecture fails with
include/kvm_util.h: In function ‘vm_compute_max_gfn’:
include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’
return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1;
^~
This is because the declaration of struct kvm_vm is in
lib/kvm_util_internal.h as an effort to make it private to
the test lib code. We can still provide arch specific functions,
though, by making the generic function symbols weak. Do that to
fix the compile error.
Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211214151842.848314-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG/fW8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOVBAf/dZDUEnrsu/o4xVPjPinMihtMstGk
RP7PqmJ+6nHeDsfoivIiigaFchpc0DYq2kU/8iOPkbsEnLyFuhKg1jUHMQiK5ZGY
shWvJq9HEwqAQ4v3H3PC5SomwlO4UmRkbrR4NT1SwFBSIk9s+soVbDZrdL8bJW7x
6XS01LsXeUPEcJj+h9bDGKmnibkiE4hsf9jGMgfiXgF33DB+LDNU9TH9MFn4K6J2
ColgIqZ+o5dXn7wMcsDsw+DTj81nki+gkghmW9k5rC5FA3qmKd3e5T2sgKey3Ztd
J+acNmGyG/hhYNE4RHXaN+ckNEcqywcCA31DfWq87aw6yP4pF2dKWu+BYw==
=yEYt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two small fixes, one of which was being worked around in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Retry page fault if MMU reload is pending and root has no sp
KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend
on guest visible CPUIDs and (incorrect) KVM logic implementing it is
about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden
and causes test to fail.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add selftest cases in action police with skip_hw.
Add selftest case to validate flags of filter and action.
These tests depend on corresponding iproute2 command support.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test verifies that a ksym of non-struct can not be directly
updated.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-10-haoluo@google.com
The fixed commit attempts to get the output file descriptor even if the
file was never opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
__GI___fileno (fp=0x0) at fileno.c:35
35 fileno.c: No such file or directory.
(gdb) bt
#0 __GI___fileno (fp=0x0) at fileno.c:35
#1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72
#2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69
#3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017
#4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313
#5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539
(gdb)
Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fixed commit attempts to close inject.output even if it was never
opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
48 iofclose.c: No such file or directory.
(gdb) bt
#0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
#1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376
#2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085
#3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313
#4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539
(gdb)
Fixes: 02e6246f5364d526 ("perf inject: Close inject.output on exit")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc()
fails, add IS_ERR() checking for ctx->ids.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211212062504.25841-1-linmq006@gmail.com
[ s/kfree()/free()/ and add missing linux/err.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel will crash without
'mptcp: clear 'kern' flag from fallback sockets' change.
Since this doesn't slow down testing in a noticeable way,
run this unconditionally.
The explicit test did not catch this, because the check was done
for tcp socket returned by 'socket(.. IPPROTO_TCP) rather than a
tcp socket returned by accept() on a mptcp listen fd.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Synthesize instruction events for every ARM SPE record.
Arm SPE implements a hardware-based sample period, and perf implements a
software-based one. Add a warning message to inform the user of this.
Signed-off-by: German Gomez <german.gomez@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211216152404.52474-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reimplement bpf_probe_large_insn_limit() in bpftool, as that libbpf API
is scheduled for deprecation in v0.8.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-4-andrii@kernel.org
Add selftests for prog/map/prog+helper feature probing APIs. Prog and
map selftests are designed in such a way that they will always test all
the possible prog/map types, based on running kernel's vmlinux BTF enum
definition. This way we'll always be sure that when adding new BPF
program types or map types, libbpf will be always updated accordingly to
be able to feature-detect them.
BPF prog_helper selftest will have to be manually extended with
interesting and important prog+helper combinations, it's easy, but can't
be completely automated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-3-andrii@kernel.org
Create three extensible alternatives to inconsistently named
feature-probing APIs:
- libbpf_probe_bpf_prog_type() instead of bpf_probe_prog_type();
- libbpf_probe_bpf_map_type() instead of bpf_probe_map_type();
- libbpf_probe_bpf_helper() instead of bpf_probe_helper().
Set up return values such that libbpf can report errors (e.g., if some
combination of input arguments isn't possible to validate, etc), in
addition to whether the feature is supported (return value 1) or not
supported (return value 0).
Also schedule deprecation of those three APIs. Also schedule deprecation
of bpf_probe_large_insn_limit().
Also fix all the existing detection logic for various program and map
types that never worked:
- BPF_PROG_TYPE_LIRC_MODE2;
- BPF_PROG_TYPE_TRACING;
- BPF_PROG_TYPE_LSM;
- BPF_PROG_TYPE_EXT;
- BPF_PROG_TYPE_SYSCALL;
- BPF_PROG_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_BLOOM_FILTER.
Above prog/map types needed special setups and detection logic to work.
Subsequent patch adds selftests that will make sure that all the
detection logic keeps working for all current and future program and map
types, avoiding otherwise inevitable bit rot.
[0] Closes: https://github.com/libbpf/libbpf/issues/312
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-2-andrii@kernel.org
The SGX selftest fails to build on tip/x86/sgx:
main.c: In function ‘get_total_epc_mem’:
main.c:296:17: error: implicit declaration of function ‘__cpuid’ [-Werror=implicit-function-declaration]
296 | __cpuid(&eax, &ebx, &ecx, &edx);
| ^~~~~~~
Include cpuid.h and use __cpuid_count() macro in order to fix the
compilation issue.
[ dhansen: tweak commit message ]
Fixes: f0ff2447b861 ("selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211204202355.23005-1-jarkko@kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Use '-o' within [] in order to avoid spawning two processes for test.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a set of tests for the new gpio-sim module. This is a pure shell
test-suite and uses the helper programs available in the gpio selftests
directory. These test-cases only test the functionalities exposed by the
gpio-sim driver, not those handled by core gpiolib code.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add a simple program that allows to read GPIO line names from the
character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add a simple program that allows to retrieve chip properties from the
GPIO character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
