IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Rename PT_MAX_HUGEPAGE_LEVEL to KVM_MAX_HUGEPAGE_LEVEL and make it a
separate define in anticipation of dropping KVM's PT_*_LEVEL enums in
favor of the kernel's PG_LEVEL_* enums.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200428005422.4235-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vcpu->arch.guest_xstate_size lost its only user since commit df1daba7d1cb
("KVM: x86: support XSAVES usage in the host"), so clean it up.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200429154312.1411-1-xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use an enum for passing around the failure code for a failed VM-Enter
that results in VM-Exit to provide a level of indirection from the final
resting place of the failure code, vmcs.EXIT_QUALIFICATION. The exit
qualification field is an unsigned long, e.g. passing around
'u32 exit_qual' throws up red flags as it suggests KVM may be dropping
bits when reporting errors to L1. This is a red herring because the
only defined failure codes are 0, 2, 3, and 4, i.e. don't come remotely
close to overflowing a u32.
Setting vmcs.EXIT_QUALIFICATION on entry failure is further complicated
by the MSR load list, which returns the (1-based) entry that failed, and
the number of MSRs to load is a 32-bit VMCS field. At first blush, it
would appear that overflowing a u32 is possible, but the number of MSRs
that can be loaded is hardcapped at 4096 (limited by MSR_IA32_VMX_MISC).
In other words, there are two completely disparate types of data that
eventually get stuffed into vmcs.EXIT_QUALIFICATION, neither of which is
an 'unsigned long' in nature. This was presumably the reasoning for
switching to 'u32' when the related code was refactored in commit
ca0bde28f2ed6 ("kvm: nVMX: Split VMCS checks from nested_vmx_run()").
Using an enum for the failure code addresses the technically-possible-
but-will-never-happen scenario where Intel defines a failure code that
doesn't fit in a 32-bit integer. The enum variables and values will
either be automatically sized (gcc 5.4 behavior) or be subjected to some
combination of truncation. The former case will simply work, while the
latter will trigger a compile-time warning unless the compiler is being
particularly unhelpful.
Separating the failure code from the failed MSR entry allows for
disassociating both from vmcs.EXIT_QUALIFICATION, which avoids the
conundrum where KVM has to choose between 'u32 exit_qual' and tracking
values as 'unsigned long' that have no business being tracked as such.
To cement the split, set vmcs12->exit_qualification directly from the
entry error code or failed MSR index instead of bouncing through a local
variable.
Opportunistically rename the variables in load_vmcs12_host_state() and
vmx_set_nested_state() to call out that they're ignored, set exit_reason
on demand on nested VM-Enter failure, and add a comment in
nested_vmx_load_msr() to call out that returning 'i + 1' can't wrap.
No functional change intended.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200511220529.11402-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
... or the odyssey of trying to disable the stack protector for the
function which generates the stack canary value.
The whole story started with Sergei reporting a boot crash with a kernel
built with gcc-10:
Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013
Call Trace:
dump_stack
panic
? start_secondary
__stack_chk_fail
start_secondary
secondary_startup_64
-—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary
This happens because gcc-10 tail-call optimizes the last function call
in start_secondary() - cpu_startup_entry() - and thus emits a stack
canary check which fails because the canary value changes after the
boot_init_stack_canary() call.
To fix that, the initial attempt was to mark the one function which
generates the stack canary with:
__attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused)
however, using the optimize attribute doesn't work cumulatively
as the attribute does not add to but rather replaces previously
supplied optimization options - roughly all -fxxx options.
The key one among them being -fno-omit-frame-pointer and thus leading to
not present frame pointer - frame pointer which the kernel needs.
The next attempt to prevent compilers from tail-call optimizing
the last function call cpu_startup_entry(), shy of carving out
start_secondary() into a separate compilation unit and building it with
-fno-stack-protector, was to add an empty asm("").
This current solution was short and sweet, and reportedly, is supported
by both compilers but we didn't get very far this time: future (LTO?)
optimization passes could potentially eliminate this, which leads us
to the third attempt: having an actual memory barrier there which the
compiler cannot ignore or move around etc.
That should hold for a long time, but hey we said that about the other
two solutions too so...
Reported-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org
- Fix a crash when having function tracing and function stack tracing on
the command line. The ftrace trampolines are created as executable and
read only. But the stack tracer tries to modify them with text_poke()
which expects all kernel text to still be writable at boot.
Keep the trampolines writable at boot, and convert them to read-only
with the rest of the kernel.
- A selftest was triggering in the ring buffer iterator code, that
is no longer valid with the update of keeping the ring buffer
writable while a iterator is reading. Just bail after three failed
attempts to get an event and remove the warning and disabling of the
ring buffer.
- While modifying the ring buffer code, decided to remove all the
unnecessary BUG() calls.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXr1CDhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsXcAQCoL229SBrtHsn4DUO7eAQRppUT3hNw
RuKzvQ56+1GccQEAh8VGCeg89uMSK6imrTujEl6VmOUdbgrD5R96yiKoGQw=
=vi+k
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing fixes from Steven Rostedt:
"Various tracing fixes:
- Fix a crash when having function tracing and function stack tracing
on the command line.
The ftrace trampolines are created as executable and read only. But
the stack tracer tries to modify them with text_poke() which
expects all kernel text to still be writable at boot. Keep the
trampolines writable at boot, and convert them to read-only with
the rest of the kernel.
- A selftest was triggering in the ring buffer iterator code, that is
no longer valid with the update of keeping the ring buffer writable
while a iterator is reading.
Just bail after three failed attempts to get an event and remove
the warning and disabling of the ring buffer.
- While modifying the ring buffer code, decided to remove all the
unnecessary BUG() calls"
* tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Remove all BUG() calls
ring-buffer: Don't deactivate the ring buffer on failed iterator reads
x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up
The function copy_kernel_to_xregs_err() uses XRSTOR which can work with
standard or compacted format without supervisor xstates. However, when
supervisor xstates are present, XRSTORS must be used. Fix it by using
XRSTORS when supervisor state handling is enabled.
I also considered if there were additional cases where XRSTOR might be
mistakenly called instead of XRSTORS. There are only three XRSTOR sites
in the kernel:
1. copy_kernel_to_xregs_booting(), already switches between XRSTOR and
XRSTORS based on X86_FEATURE_XSAVES.
2. copy_user_to_xregs(), which *needs* XRSTOR because it is copying from
userspace and must never copy supervisor state with XRSTORS.
3. copy_kernel_to_xregs_err() mistakenly used XRSTOR only. Fix it.
[ bp: Massage commit message. ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-8-yu-cheng.yu@intel.com
Snapshot the TDP level now that it's invariant (SVM) or dependent only
on host capabilities and guest CPUID (VMX). This avoids having to call
kvm_x86_ops.get_tdp_level() when initializing a TDP MMU and/or
calculating the page role, and thus avoids the associated retpoline.
Drop the WARN in vmx_get_tdp_level() as updating CPUID while L2 is
active is legal, if dodgy.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move CR0 caching into the standard register caching mechanism in order
to take advantage of the availability checks provided by regs_avail.
This avoids multiple VMREADs in the (uncommon) case where kvm_read_cr0()
is called multiple times in a single VM-Exit, and more importantly
eliminates a kvm_x86_ops hook, saves a retpoline on SVM when reading
CR0, and squashes the confusing naming discrepancy of "cache_reg" vs.
"decache_cr0_guest_bits".
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move CR4 caching into the standard register caching mechanism in order
to take advantage of the availability checks provided by regs_avail.
This avoids multiple VMREADs and retpolines (when configured) during
nested VMX transitions as kvm_read_cr4_bits() is invoked multiple times
on each transition, e.g. when stuffing CR0 and CR3.
As an added bonus, this eliminates a kvm_x86_ops hook, saves a retpoline
on SVM when reading CR4, and squashes the confusing naming discrepancy
of "cache_reg" vs. "decache_cr4_guest_bits".
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Save L1's TSC offset in 'struct kvm_vcpu_arch' and drop the kvm_x86_ops
hook read_l1_tsc_offset(). This avoids a retpoline (when configured)
when reading L1's effective TSC, which is done at least once on every
VM-Exit.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument to interrupt_allowed and nmi_allowed, to checking if
interrupt injection is blocked. Use the hook to handle the case where
an interrupt arrives between check_nested_events() and the injection
logic. Drop the retry of check_nested_events() that hack-a-fixed the
same condition.
Blocking injection is also a bit of a hack, e.g. KVM should do exiting
and non-exiting interrupt processing in a single pass, but it's a more
precise hack. The old comment is also misleading, e.g. KVM_REQ_EVENT is
purely an optimization, setting it on every run loop (which KVM doesn't
do) should not affect functionality, only performance.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-13-sean.j.christopherson@intel.com>
[Extend to SVM, add SMI and NMI. Even though NMI and SMI cannot come
asynchronously right now, making the fix generic is easy and removes a
special case. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return an actual bool for kvm_x86_ops' {interrupt_nmi}_allowed() hook to
better reflect the return semantics, and to avoid creating an even
bigger mess when the related VMX code is refactored in upcoming patches.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a kvm_x86_ops hook to detect a nested pending "hypervisor timer" and
use it to effectively open a window for servicing the expired timer.
Like pending SMIs on VMX, opening a window simply means requesting an
immediate exit.
This fixes a bug where an expired VMX preemption timer (for L2) will be
delayed and/or lost if a pending exception is injected into L2. The
pending exception is rightly prioritized by vmx_check_nested_events()
and injected into L2, with the preemption timer left pending. Because
no window opened, L2 is free to run uninterrupted.
Fixes: f4124500c2c13 ("KVM: nVMX: Fully emulate preemption timer")
Reported-by: Jim Mattson <jmattson@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-3-sean.j.christopherson@intel.com>
[Check it in kvm_vcpu_has_events too, to ensure that the preemption
timer is serviced promptly even if the vCPU is halted and L1 is not
intercepting HLT. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Though rdpkru and wrpkru are contingent upon CR4.PKE, the PKRU
resource isn't. It can be read with XSAVE and written with XRSTOR.
So, if we don't set the guest PKRU value here(kvm_load_guest_xsave_state),
the guest can read the host value.
In case of kvm_load_host_xsave_state, guest with CR4.PKE clear could
potentially use XRSTOR to change the host PKRU value.
While at it, move pkru state save/restore to common code and the
host_pkru field to kvm_vcpu_arch. This will let SVM support protection keys.
Cc: stable@vger.kernel.org
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <158932794619.44260.14508381096663848853.stgit@naples-babu.amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, fpu__clear() clears all fpregs and xstates. Once XSAVES
supervisor states are introduced, supervisor settings (e.g. CET xstates)
must remain active for signals; It is necessary to have separate functions:
- Create fpu__clear_user_states(): clear only user settings for signals;
- Create fpu__clear_all(): clear both user and supervisor settings in
flush_thread().
Also modify copy_init_fpstate_to_fpregs() to take a mask from above two
functions.
Remove obvious side-comment in fpu__clear(), while at it.
[ bp: Make the second argument of fpu__clear() bool after requesting it
a bunch of times during review.
- Add a comment about copy_init_fpstate_to_fpregs() locking needs. ]
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-6-yu-cheng.yu@intel.com
Before the introduction of XSAVES supervisor states, 'xfeatures_mask' is
used at various places to determine XSAVE buffer components and XCR0 bits.
It contains only user xstates. To support supervisor xstates, it is
necessary to separate user and supervisor xstates:
- First, change 'xfeatures_mask' to 'xfeatures_mask_all', which represents
the full set of bits that should ever be set in a kernel XSAVE buffer.
- Introduce xfeatures_mask_supervisor() and xfeatures_mask_user() to
extract relevant xfeatures from xfeatures_mask_all.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-4-yu-cheng.yu@intel.com
Booting one of my machines, it triggered the following crash:
Kernel/User page tables isolation: enabled
ftrace: allocating 36577 entries in 143 pages
Starting tracer 'function'
BUG: unable to handle page fault for address: ffffffffa000005c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ #24
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
RIP: 0010:text_poke_early+0x4a/0x58
Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff
0 41 57 49
RSP: 0000:ffffffff82003d38 EFLAGS: 00010046
RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005
RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c
RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0
R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0
R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0
FS: 0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0
Call Trace:
text_poke_bp+0x27/0x64
? mutex_lock+0x36/0x5d
arch_ftrace_update_trampoline+0x287/0x2d5
? ftrace_replace_code+0x14b/0x160
? ftrace_update_ftrace_func+0x65/0x6c
__register_ftrace_function+0x6d/0x81
ftrace_startup+0x23/0xc1
register_ftrace_function+0x20/0x37
func_set_flag+0x59/0x77
__set_tracer_option.isra.19+0x20/0x3e
trace_set_options+0xd6/0x13e
apply_trace_boot_options+0x44/0x6d
register_tracer+0x19e/0x1ac
early_trace_init+0x21b/0x2c9
start_kernel+0x241/0x518
? load_ucode_intel_bsp+0x21/0x52
secondary_startup_64+0xa4/0xb0
I was able to trigger it on other machines, when I added to the kernel
command line of both "ftrace=function" and "trace_options=func_stack_trace".
The cause is the "ftrace=function" would register the function tracer
and create a trampoline, and it will set it as executable and
read-only. Then the "trace_options=func_stack_trace" would then update
the same trampoline to include the stack tracer version of the function
tracer. But since the trampoline already exists, it updates it with
text_poke_bp(). The problem is that text_poke_bp() called while
system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not
the page mapping, as it would think that the text is still read-write.
But in this case it is not, and we take a fault and crash.
Instead, lets keep the ftrace trampolines read-write during boot up,
and then when the kernel executable text is set to read-only, the
ftrace trampolines get set to read-only as well.
Link: https://lkml.kernel.org/r/20200430202147.4dc6e2de@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Fixes: 768ae4406a5c ("x86/ftrace: Use text_poke()")
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
XCNTXT_MASK is 'all supported xfeatures' before introducing supervisor
xstates. Rename it to XFEATURE_MASK_USER_SUPPORTED to make clear that
these are user xstates.
Replace XFEATURE_MASK_SUPERVISOR with the following:
- XFEATURE_MASK_SUPERVISOR_SUPPORTED: Currently nothing. ENQCMD and
Control-flow Enforcement Technology (CET) will be introduced in separate
series.
- XFEATURE_MASK_SUPERVISOR_UNSUPPORTED: Currently only Processor Trace.
- XFEATURE_MASK_SUPERVISOR_ALL: the combination of above.
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-3-yu-cheng.yu@intel.com
The function validate_xstate_header() validates an xstate header coming
from userspace (PTRACE or sigreturn). To make it clear, rename it to
validate_user_xstate_header().
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200512145444.15483-2-yu-cheng.yu@intel.com
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-9-w@1wt.eu
Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Currently we have architecture-specific fd_inb() and fd_outb() functions
or macros, taking just a port which is in fact made of a base address and
a register. The base address is FDC-specific and derived from the local or
global "fdc" variable through the FD_IOPORT macro used in the base address
calculation.
This change splits this by explicitly passing the FDC's base address and
the register separately to fd_outb() and fd_inb(). It affects the
following archs:
- x86, alpha, mips, powerpc, parisc, arm, m68k:
simple remap of port -> base+reg
- sparc32: use of reg only, since the base address was already masked
out and the FDC controller is known from a static struct.
- sparc64: like x86 for PCI, like sparc32 for 82077
Some archs use inline functions and others macros. This was not
unified in order to minimize the number of changes to review. For the
same reason checkpatch still spews a few warnings about things that
were already there before.
The parisc still uses hard-coded register values and could be cleaned up
by taking the register definitions.
The sparc per-controller inb/outb functions could further be refined
to explicitly take an FDC register instead of a port in argument but it
was not needed yet and may be cleaned later.
Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
The current minimum required version of binutils is 2.23, which supports
the INVPCID instruction mnemonic. Replace the byte-wise specification of
INVPCID with the proper mnemonic.
[ bp: Add symbolic operand names for increased readability and flip
their order like the insn expects them for the AT&T syntax. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200508092247.132147-1-ubizjak@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
- Ensure that direct mapping alias is always flushed when changing page
attributes. The optimization for small ranges failed to do so when
the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it is
guaranteed to only be called once during boot and cannot be rearmed by
clearing warn_once after boot. If it's invoked post boot then lockdep
rightfully complains about a potential deadlock as the calling context
is different.
- A series of fixes for objtool and the ORC unwinder addressing variety
of small issues:
Stack offset tracking for indirect CFAs in objtool ignored subsequent
pushs and pops
Repair the unwind hints in the register clearing entry ASM code
Make the unwinding in the low level exit to usermode code stop after
switching to the trampoline stack. The unwind hint is not longer valid
and the ORC unwinder emits a warning as it can't find the registers
anymore.
Fix the unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
Prevent unwinder warnings when dumping the stack of a non-current
task as there is no way to be sure about the validity because the
dumped stack can be a moving target.
Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip the
first frame.
Prevent ORC unwinding before ORC data has been initialized
Immediately terminate unwinding when a unknown ORC entry type is
found.
Prevent premature stop of the unwinder caused by IRET frames.
Fix another infinite loop in objtool caused by a negative offset which
was not catched.
Address a few build warnings in the ORC unwinder and add missing
static/ro_after_init annotations
-----BEGIN PGP SIGNATURE-----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=0rCi
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Ensure that direct mapping alias is always flushed when changing
page attributes. The optimization for small ranges failed to do so
when the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it
is guaranteed to only be called once during boot and cannot be
rearmed by clearing warn_once after boot. If it's invoked post boot
then lockdep rightfully complains about a potential deadlock as the
calling context is different.
- A series of fixes for objtool and the ORC unwinder addressing
variety of small issues:
- Stack offset tracking for indirect CFAs in objtool ignored
subsequent pushs and pops
- Repair the unwind hints in the register clearing entry ASM code
- Make the unwinding in the low level exit to usermode code stop
after switching to the trampoline stack. The unwind hint is no
longer valid and the ORC unwinder emits a warning as it can't
find the registers anymore.
- Fix unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
- Prevent unwinder warnings when dumping the stack of a
non-current task as there is no way to be sure about the
validity because the dumped stack can be a moving target.
- Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip
the first frame.
- Prevent ORC unwinding before ORC data has been initialized
- Immediately terminate unwinding when a unknown ORC entry type
is found.
- Prevent premature stop of the unwinder caused by IRET frames.
- Fix another infinite loop in objtool caused by a negative
offset which was not catched.
- Address a few build warnings in the ORC unwinder and add
missing static/ro_after_init annotations"
* tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES
x86/apic: Move TSC deadline timer debug printk
ftrace/x86: Fix trace event registration for syscalls without arguments
x86/mm/cpa: Flush direct map alias during cpa
objtool: Fix infinite loop in for_offset_range()
x86/unwind/orc: Fix premature unwind stoppage due to IRET frames
x86/unwind/orc: Fix error path for bad ORC entry type
x86/unwind/orc: Prevent unwinding before ORC initialization
x86/unwind/orc: Don't skip the first frame for inactive tasks
x86/unwind: Prevent false warnings for non-current tasks
x86/unwind/orc: Convert global variables to static
x86/entry/64: Fix unwind hints in rewind_stack_do_exit()
x86/entry/64: Fix unwind hints in __switch_to_asm()
x86/entry/64: Fix unwind hints in kernel exit path
x86/entry/64: Fix unwind hints in register clearing code
objtool: Fix stack offset tracking for indirect CFAs
There are two issues with KVM_EXIT_DEBUG on AMD, whose root cause is the
different handling of DR6 on intercepted #DB exceptions on Intel and AMD.
On Intel, #DB exceptions transmit the DR6 value via the exit qualification
field of the VMCS, and the exit qualification only contains the description
of the precise event that caused a vmexit.
On AMD, instead the DR6 field of the VMCB is filled in as if the #DB exception
was to be injected into the guest. This has two effects when guest debugging
is in use:
* the guest DR6 is clobbered
* the kvm_run->debug.arch.dr6 field can accumulate more debug events, rather
than just the last one that happened (the testcase in the next patch covers
this issue).
This patch fixes both issues by emulating, so to speak, the Intel behavior
on AMD processors. The important observation is that (after the previous
patches) the VMCB value of DR6 is only ever observable from the guest is
KVM_DEBUGREG_WONT_EXIT is set. Therefore we can actually set vmcb->save.dr6
to any value we want as long as KVM_DEBUGREG_WONT_EXIT is clear, which it
will be if guest debugging is enabled.
Therefore it is possible to enter the guest with an all-zero DR6,
reconstruct the #DB payload from the DR6 we get at exit time, and let
kvm_deliver_exception_payload move the newly set bits into vcpu->arch.dr6.
Some extra bits may be included in the payload if KVM_DEBUGREG_WONT_EXIT
is set, but this is harmless.
This may not be the most optimized way to deal with this, but it is
simple and, being confined within SVM code, it gets rid of the set_dr6
callback and kvm_update_dr6.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_x86_ops.set_dr6 is only ever called with vcpu->arch.dr6 as the
second argument. Ensure that the VMCB value is synchronized to
vcpu->arch.dr6 on #DB (both "normal" and nested) and nested vmentry, so
that the current value of DR6 is always available in vcpu->arch.dr6.
The get_dr6 callback can just access vcpu->arch.dr6 and becomes redundant.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6yqbIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObBQf+NH9DCs6X92YggAoNpJl6uSIOX35X
ErdWqYj80Xx95QU73aMukjs3Zqxe6WfYI9jPEOD8SDUZzZlVfIA35D8BYlqt1c5R
A2K2ebTQbZ+j487QTUPbEvEivyxyVSozwvOdKBfL5kv0D9Cn2STyjVjmguUoCp9n
VztmwbwpSZdOnexRSolwAWuyOriYbvpV12cIZpcMGrjL67yZPv8UyCxxJplDCLlB
1c8tvGI2Md8apE/YZDqlCFh3H4YBQsact8uOoyY8cXKO/xIAsZOI+Dhm/cQAhGDk
QIQqv/hkM4HPvOXQluwIau4Cx+Fl05xY/ggtQt4z/8yml2pOw8PKmwziZA==
=60QX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, mostly for ARM and AMD, and more documentation.
Slightly bigger than usual because I couldn't send out what was
pending for rc4, but there is nothing worrisome going on. I have more
fixes pending for guest debugging support (gdbstub) but I will send
them next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
KVM: selftests: Fix build for evmcs.h
kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bits
KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB path
docs/virt/kvm: Document configuring and running nested guests
KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction
kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts
KVM: x86: Fixes posted interrupt check for IRQs delivery modes
KVM: SVM: fill in kvm_run->debug.arch.dr[67]
KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warning
KVM: arm64: Fix 32bit PC wrap-around
KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITS
KVM: arm64: Save/restore sp_el0 as part of __guest_enter
KVM: arm64: Delete duplicated label in invalid_vector
KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi()
KVM: arm64: vgic-v3: Retire all pending LPIs on vcpu destroy
KVM: arm: vgic-v2: Only use the virtual state when userspace accesses pending bits
KVM: arm: vgic: Only use the virtual state when userspace accesses enable bits
KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read
KVM: arm64: PSCI: Forbid 64bit functions for 32bit guests
...
TPAUSE instructs the processor to enter an implementation-dependent
optimized state. The instruction execution wakes up when the time-stamp
counter reaches or exceeds the implicit EDX:EAX 64-bit input value.
The instruction execution also wakes up due to the expiration of
the operating system time-limit or by an external interrupt
or exceptions such as a debug exception or a machine check exception.
TPAUSE offers a choice of two lower power states:
1. Light-weight power/performance optimized state C0.1
2. Improved power/performance optimized state C0.2
This way, it can save power with low wake-up latency in comparison to
spinloop based delay. The selection between the two is governed by the
input register.
TPAUSE is available on processors with X86_FEATURE_WAITPKG.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1587757076-30337-4-git-send-email-kyung.min.park@intel.com
The naming conventions in the delay code are confusing at best.
All delay variants use a loops argument and or variable which originates
from the original delay_loop() implementation. But all variants except
delay_loop() are based on TSC cycles.
Rename the argument to cycles and make it type u64 to avoid these weird
expansions to u64 in the functions.
Rename MWAITX_MAX_LOOPS to MWAITX_MAX_WAIT_CYCLES for the same reason
and fixup the comment of delay_mwaitx() as well.
Mark the delay_fn function pointer __ro_after_init and fixup the comment
for it.
No functional change and preparation for the upcoming TPAUSE based delay
variant.
[ Kyung Min Park: Added __init to use_tsc_delay() ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1587757076-30337-2-git-send-email-kyung.min.park@intel.com
No users anywhere in the kernel tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-12-hch@lst.de
Neither this functions nor the helpers used to implement it are used
anywhere in the kernel tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-10-hch@lst.de
Merge two helpers only used by uv_send_IPI_one() into the main function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-9-hch@lst.de
is_uv_hubless() is only used in x2apic_uv_x.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-7-hch@lst.de
All of the macros are always defined to one. Remove them and the dead
code keyed off them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-6-hch@lst.de
uv_partition_coherence_id() is only used once. Just open code it in the
only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-3-hch@lst.de
Both functions are only used inside of bios_uv.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-2-hch@lst.de
Go through kvm_queue_exception_p so that the payload is correctly delivered
through the exit qualification, and add a kvm_update_dr6 call to
kvm_deliver_exception_payload that is needed on AMD.
Reported-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The original Memory Bandwidth Monitoring (MBM) architectural
definition defines counters of up to 62 bits in the
IA32_QM_CTR MSR while the first-generation MBM implementation
uses statically defined 24 bit counters.
Expand the MBM CPUID enumeration properties to include the MBM
counter width. The previously undefined EAX output register contains,
in bits [7:0], the MBM counter width encoded as an offset from
24 bits. Enumerating this property is only specified for Intel
CPUs.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/afa3af2f753f6bc301fb743bc8944e749cb24afa.1588715690.git.reinette.chatre@intel.com
The function determining a platform's support and properties of cache
occupancy and memory bandwidth monitoring (properties of
X86_FEATURE_CQM_LLC) can be found among the common CPU code. After
the feature's properties is populated in the per-CPU data the resctrl
subsystem is the only consumer (via boot_cpu_data).
Move the function that obtains the CPU information used by resctrl to
the resctrl subsystem and rename it from init_cqm() to
resctrl_cpu_detect(). The function continues to be called from the
common CPU code. This move is done in preparation of the addition of some
vendor specific code.
No functional change.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/38433b99f9d16c8f4ee796f8cc42b871531fa203.1588715690.git.reinette.chatre@intel.com
asm/resctrl_sched.h is dedicated to the code used for configuration
of the CPU resource control state when a task is scheduled.
Rename resctrl_sched.h to resctrl.h in preparation of additions that
will no longer make this file dedicated to work done during scheduling.
No functional change.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/6914e0ef880b539a82a6d889f9423496d471ad1d.1588715690.git.reinette.chatre@intel.com
Factor out a copy_siginfo_to_external32 helper from
copy_siginfo_to_user32 that fills out the compat_siginfo, but does so
on a kernel space data structure. With that we can let architectures
override copy_siginfo_to_user32 with their own implementations using
copy_siginfo_to_external32. That allows moving the x32 SIGCHLD purely
to x86 architecture code.
As a nice side effect copy_siginfo_to_external32 also comes in handy
for avoiding a set_fs() call in the coredump code later on.
Contains improvements from Eric W. Biederman <ebiederm@xmission.com>
and Arnd Bergmann <arnd@arndb.de>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit
22090f84bc3f ("efi/libstub: unify EFI call wrappers for non-x86")
refactored the macros that are used to provide wrappers for mixed-mode
calls on x86, allowing us to boot a 64-bit kernel on 32-bit firmware.
Unfortunately, this broke mixed mode boot due to the fact that
efi_is_native() is not a macro on x86.
All of these macros should go together, so rather than testing each one
to see if it is defined, condition the generic macro definitions on a
new ARCH_HAS_EFISTUB_WRAPPERS, and remove the wrapper definitions on x86
as well if CONFIG_EFI_MIXED is not enabled.
Fixes: 22090f84bc3f ("efi/libstub: unify EFI call wrappers for non-x86")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200504150248.62482-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Current logic incorrectly uses the enum ioapic_irq_destination_types
to check the posted interrupt destination types. However, the value was
set using APIC_DM_XXX macros, which are left-shifted by 8 bits.
Fixes by using the APIC_DM_FIXED and APIC_DM_LOWEST instead.
Fixes: (fdcf75621375 'KVM: x86: Disable posted interrupts for non-standard IRQs delivery modes')
Cc: Alexander Graf <graf@amazon.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1586239989-58305-1-git-send-email-suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
... to fix these build warnings:
In file included from ./arch/x86/include/asm/uv/uv_hub.h:22,
from drivers/misc/sgi-gru/grukdump.c:16:
./arch/x86/include/asm/uv/uv.h:39:21: warning: ‘struct flush_tlb_info’ declared \
inside parameter list will not be visible outside of this definition or declaration
39 | const struct flush_tlb_info *info);
| ^~~~~~~~~~~~~~
In file included from ./arch/x86/include/asm/uv/uv_hub.h:22,
from drivers/misc/sgi-gru/grutlbpurge.c:28:
./arch/x86/include/asm/uv/uv.h:39:21: warning: ‘struct flush_tlb_info’ declared \
inside parameter list will not be visible outside of this definition or declaration
39 | const struct flush_tlb_info *info);
| ^~~~~~~~~~~~~~
...
after
bfe3d8f6313d ("x86/tlb: Restrict access to tlbstate")
restricted access to tlbstate.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200503103107.3419-1-bp@alien8.de
The refactoring of SYSCALL_DEFINE0() macros removed the ABI stubs and
simply defines __abi_sys_$NAME as alias of __do_sys_$NAME.
As a result kallsyms_lookup() returns "__do_sys_$NAME" which does not match
with the declared trace event name.
See also commit 1c758a2202a6 ("tracing/x86: Update syscall trace events to
handle new prefixed syscall func names").
Add __do_sys_ to the valid prefixes which are checked in
arch_syscall_match_sym_name().
Fixes: d2b5de495ee9 ("x86/entry: Refactor SYSCALL_DEFINE0 macros")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/158636958997.7900.16485049455470033557.stgit@buzz
Currently objtool cannot understand retpolines, and thus cannot
generate ORC unwind information for them. This means that we cannot
unwind from the middle of a retpoline.
The recent ANNOTATE_INTRA_FUNCTION_CALL and UNWIND_HINT_RET_OFFSET
support in objtool enables it to understand the basic retpoline
construct. A further problem is that the ORC unwind information is
alternative invariant; IOW. every alternative should have the same
ORC, retpolines obviously violate this. This means we need to
out-of-line them.
Since all GCC generated code already uses out-of-line retpolines, this
should not affect performance much, if anything.
This will enable objtool to generate valid ORC data for the
out-of-line copies, which means we can correctly and reliably unwind
through a retpoline.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191700.210835357@infradead.org
In order to change the {JMP,CALL}_NOSPEC macros to call out-of-line
versions of the retpoline magic, we need to remove the '%' from the
argument, such that we can paste it onto symbol names.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191700.151623523@infradead.org
Because of how KSYM works, we need one declaration per line. Seeing
how we're going to be doubling the amount of retpoline symbols,
simplify the machinery in order to avoid having to copy/paste even
more.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191700.091696925@infradead.org
